Dunning Data migration

Hi,
We are in the process of migration dunning related data. We have migrated the dunning level in customer master, obtained from the legacy system. Also, the last dunned date is also updated in customer master accordingly and open items have also been migrated.
The issue is for the migrated customer, when we run dunning cycle in the new system for the first time, the dunning level executed is dunning level one always. however, in reality it could be a higher level as the customer might be on dunning level 2,3.... in the legacy system.
Any inputs on how the new system has to take the next relevant dunning level?
Appreciate inputs!

Hi,
Thanks, it worked.. One more question we need to upload dunning level & last dunned date for all open items (to be done separately i.e. after all open items migrated)  which is different for each and every line item so if we use mass upload we have to do for each and every open line item which is not feasible as open line items in thousands..I tried LSMW also,problem is that for Batch input recording we need to run one complete cycle in sm30 but there is no maintenance dialog for BSEG & BSID  table.. Please share your valuable Inputs how we can go ahead..
Thanks in advance.

Similar Messages

  • HOW TO MIGRATE DUNNING LEVEL & LAST DUNNED DATE FOR ALL OPEN LINE ITEMS

    Hi,
    We need to upload dunning level & last dunned date for all open items (to be done separately i.e. after all open items migrated) which is different for each and every line item so if we use mass upload (fbl5n) we have to do for each and every open line item which is not feasible as open line items in thousands..I tried LSMW also,problem is that for Batch input recording we need to run one complete cycle in sm30 but there is no maintenance dialog for BSEG & BSID table.. Please share your valuable Inputs how we can go ahead..
    Thanks in advance

    Hi Mark,
    Thanks for your reply.
    It is complete a Zcopy of a standard one, but we are facing one or two records are not updating correctly out of hundreds of customers in the worklist.

  • Fixed Asset Data Migration Wizard

    Hi All,
    I tried to use Fixed Asset Data Migration Wizard to migration my fixed asset data from 8.82 to 9 in the development server.  The server only accessible by myself.
    When I start the migration run, system prompt me " To Continue with the fixed asset data migration, you must be the only user logged on to this company data".
    In fact I'm the only user in the company data and system not allow me to execute the migration.
    What are the causes that system recognise there is another user in the system?
    Please advise.
    Thanks in advance.
    Best Regards,
    Foong Yee

    Hi,
    If you're using SQL Server, try Detach (close existing connections) and re-Attach the database again then re-login and try executing again the wizard.
    Regards,
    Donald

  • Data Migration for Open Purchase Order

    Hi, All,
    Is there anyone know how to Count the volume for Open Purchase Order. What's the normal strategy for the Data Migration and Cut-over stage?
    My client want to know how many Open Purchase Order in the legacy system and then determine manual or automatic data migration. If manual, how to do? If automatic, how to do? Because all materials and vendors, plants are different number. How to track? How to find out to match between new and old?
    Thank you very much

    JC,
    Sounds a bit early to be making decisions about the realization phase.  It doesn't sound like you have finished the Blueprinting phase yet, much less the testing phase.
    Anyhow, in my experience I typically use LSMW (Legacy system migration workbench) to load MM master data (material masters), Inventory (WIP, RM, FG, etc) Purchasing Master data (Vendors, Purchase Info Records, Source Lists, Quota Arrangements), and Purchasing transactional documents (POs, PurReqs, Scheduling Agreements, etc).  Depending on the complexity and volume of data, it  may be necessary to write custom programs to load the data.  You will find this out during your requirements gathering.
    It is uncommon but possible to load all of these data manually.  I have never run across a client that wants to pay a consultant's hourly rate to sit at a terminal to peck away loading master data, so if the client intends to have his own users enter the data manually, the project manager should make provision that there will be qualified TRAINED client employees available for this data entry.  I did help with a portion of a conversion once manually; of Sales Credits, but there were only about 30 SD docs to load.   I did this the evening before go-live day, while I was waiting for some of my LSMW projects to complete in the background.
    A good opportunity to 'practice' your data loads is right after you have completed your development and customization, and you have gotten the approval from the client to proceed from the pilot build to the full test environment.  Once you have moved your workbench and customization into the client's test environment, but before integration testing, you can mass load all, or a substantial portion of your conversion data into the qual system.  You can treat it like a dry run for go-live, and fine tune your processes, as well as your LSMW projects.
    Yes, it is good practice to generate comparisons between legacy and SAP even if the client doesn't ask for it. For Purchase orders on the SAP side, you could use any of the standard SAP Purchasing reports, such as ME2W, ME2M, ME2C, ME2L, ME2N.  If these reports do not meet the requirements of the client, you could write a query to display the loaded data, or have an ABAPer write a custom report.
    You didn't ask, but you should also do comparisons of ALL loaded data - including master data.
    It sounds like you are implying that the client wants YOU to extract the legacy data.  For an SAP consultant, this is not very realistic (unless the legacy system is another SAP system).  Most of us do not understand the workings of the myriad legacy systems.  The client is usually expected to produce one or more legacy system technical experts for you to liase with.  You normally negotiate with the technical expert about every facet of of the data migration.  In addition, you will liase with business users, who will help you and the implementation team to logically validate that the final solution (turnkey SAP production system, fully loaded with data) will meet the client's business needs.
    Finally, you mentioned how do you track the mapping of master data between legacy and SAP.  There are many ways to do this.  I normally try to get the legacy person do the conversion on his end, eg, when he gives you the load file, you would like to have already translated the master data and inserted the SAP relevant values into the file.  If this is not possible, I usually use MS Access databases to maintain a master map, and I perform the mapping on a PC.  If your data package is small, you can probably get by using MS Excel or similar.
    Good Luck,
    DB49

  • Data migration of open production order

    Hello SAP gurus,
    Please advise me about the steps that should be followed for data migration of open production order from legacy to SAP.
    Regards,
    Anand

    Hello SAP gurus,
    Please advise me about the steps that should be followed for data migration of open production order from legacy to SAP.
    Regards,
    Anand

  • Data migration

    Dear all my friends,
    please help to share me about data migration before go-live FI system.
    i plan to migrate GL acct balance, AP/AR open item and last 3 months historical data.
    please help to show me : how should i do ?
    thanks !

    1. Normal GL Accounts: In this case line items are not required and totals are to be updated in SAP. This can be done using GL fast entry if the number is not too high.
    2. Open Item Managed GL Accounts: All the open line items are required to be uploaded in SAP from Legacy in order to clear them. Hence, a LSMW / BDC program has to be developed to upload the line items.
    BAPI_ACC_DOCUMENT_POST - for GL/AP/AR
    BAPI_ACC_INVOICE_RECEIPT_POST - for AP
    BAPI_ACC_GL_POSTING_POST - for GL
    GL Balance
    F-02 or RFBIBL00 or BAPI
    Dr GL a/c Credit Data migration Account or Clearing Account
    3. Customer & Vendor Open Items: All open line items in Customer and Vendor Accounts have to be brought in into SAP. For this also a LSMW / BDC program needs to be developed and upload the line items.
    Vendor Balances
    F-02 or RFBIBL00 or BAPI
    Credit Vendor a/c (individually) and Dr Data migration Account or Clearing Account
    Customer balances
    F-02 or RFBIBL00 or BAPI
    Dr Customers a/c (individually) and Dr Data migration Account or Clearing Account
    4. Asset Accounting: In case asset accounting is implemented the individual balances of each asset (Gross Value and Accumulated Depreciation) have to be uploaded using transaction AS91. For this also you need to develop a LSMW / BDC program. Further, you also need to update the GL Accounts related to Asset Accounts with totals for each asset class T.Code OASV.
    For uploading the Assets
    AS91 -> for uploading assets in AA
    OSAV --> for uploading assets in GL entry Dr Asset (individually) Cr Data migration Account or Clearing Account
    You can use LSMW for uploading all these things
    After uploading all, your data migration account will become zero

  • Confuse on PR & PO data migration approach new to MM module

    Hi All,
    I'm pretty confuse with the PO data migration approach when it comes to PO is GR or partial GR or GR&IR. I'm hoping that someone can enlighten me. i understand that we typically don't migrate PO when it is GR & IR, FI team usually will bring over to the new system as an vendor open item in AP. How about the PR or PO which have gone through or half release strategy? What is the follow up process?  I have created a criteria table below. How Could someone point me in the right direction? Thanks in advance.
    PR
    Criteria
    Data migration required
    Notes
    Open and Released
    Y
    Open and not Released
    Y
    Flag for Deletion
    N
    Flag for Block
    Y
    PO
    Criteria
    Data migration required
    Notes
    Open and Released
    Y
    Open and not Released
    Y
    GR but no IR
    GR & IR
    N
    AP will bring over as open item
    Flag for Deletion
    N
    Flag for Block
    Y
    Partial
    Y
    For partial GR to recreate PO only with missing GR quantity
    Regards,
    John

    Hi John,
    The approach that i have followed recently is that we have considered PO as the base document and converted other documents based on the PO condition. This means you first need to see if the PO is to be converted or not. Then you can proceed to convert the related documents like PR, Agreement, Info record, Source list, etc.
    Also open qty for PO should be considered for Material and Service line items both.
    Once a GR/SES is created, it gets updated in the PO history table EKBE with its related transaction/event type.i.e. EKBE-VGABE = 1 for GR and 9 for SES. Quantity and value also gets updated in case of material and services. You can compare this consumed quantities with PO quantity.
    Please see below from SCN and let me know if you need more info on PR or PO conversion.
    Purchase Requisition Conversion Strategy
    Thanks,
    Akash

  • Data Migration of FI-CA Cleared Items

    Hi,
    Currently I am working on a Data Migration project to migrate data from our FI-CA  module on ERP 4.7 to ECC 6.0.
    THere has been a request from the business to migrate historical data (e.g. Cleared items).
    Is there a SAP recommended approach or tools to load this data into the target environment?
    Currently all documentation around SAP data migrations talks about stategies for open item data migration however I have seen nothing arouund migrating historical financial data.
    Is this because it is not recommended or technically impossible?
    Regards
    Adam Gunn

    That BAPI is used typically for straight out vanilla GL, AR, AP postings, however you still have to create the other side of the entry and then clear it.
    I need to be able to migrate full history, which means from an FI-CA  viewpoint:
    1. Migrate FI-CA posting of liability against BP/contract account.
    2. Migrate associated payments.
    3. And then clearing documents.
    Basically the requirement is to represent the historical data in the new system as if it was posted and matched off.
    Is there a technical way to do this?
    OR,
    Do you migrate the FI-CA liabilties, then the associated payments and then run clearing on the target system?
    I suspect this is almost an impossible data migration requirement as development of the extraction and load process would be extremely complex and testing would take months to cover all posting scenarios in FI-CA. However, I would be interested if anyone has attempted to do this before.
    Adam

  • Data Migration from SAP r/3 to SAP R/3

    Hi all,
    What is the best method to migrate data from one verison of SAP to another verison of SAP ECC say from SAP 3.1 to SAP ECC 6.0?
    This is for all SAP modules including sd, mm, pp, fi, co master and transaction data.  I know there are number of technologies to load the data such as LSMW, IDOC, ALE, DI, etc but what is the best way to extract all data feeds to be loaded back into SAP.
    Thanks in advace.

    Take a look to the following link, may be useful for you
    SAP NetWeaver - Data Migration (CA-DMI) [original link is broken]
    if helpful reward points are appreciated

  • Data migration from legacy system to SAP

    hi all,
      could you please post some docs on migration from legacy system to SAP system., also the problems faced while migration and best practices in data migration
    regards
    sridharan

    Hi ,
    I require few details from you.
    1. What ETL tool you are using, If Informatica, it already have PowerConnect to connect to SAP. So you can create source and Target Structure and also you can use RFC's to send data to R/3. Else, for other ETL tools, can you prepare RFC's or any other way to send data to R/3. let me know the tool.
    2. Does R/3 contains the master data tables? If yes, then try to use LSMW for Mass upload of data to tables.
    If your client don't want to use either of these options please elaborate, what is the case.
    Regards
    Aashish Sinha

  • Data Migration from 11i to R12 Global - Open POs,lines, receipts & on hand upload, Is it possible to do the onhand qty upload with over riding of all receipts which uploaded against Open PO lines?

    Hi Friends,
    We are in a phase of data migration from 11i to R12 
    I was discussed with client & they wants extraction of all open POs which was generated after 01 Jan 2014 to till date in 11i.
    Condition for open POs is PO qty-received qty=>0
    critical Example for open PO is :PO no: 10 has 4 lines, 3lines full qty has been received & for 1 line partial qty(say 50 out of 100) received.
    in this case he wants in R12 uploading as PO no:10 should entered as open PO with all 4lines & 3 lines complete receipt should be done, for 4th line partial qty i.e 50 should be received.
    the question is if we upload on hand qty first, then open POs & receipts, it will increase the onhand qty in new system(mismatch of on hand qty's 11i to R12) 
    Is it possible to do the onhand qty upload with over riding of all receipts which uploaded against Open PO lines.
    Or Please advice best solution.
    Thanks & Regards
    Giri

    adetoye50 wrote:
    Dear Contacts Journal Support Team,
    FYI, this is a user to user support forum.  You are NOT addressing Apple here.
    Honestly, I doubt anyone is really going to take the time to read the novel you have written.

  • Error while accessing BSAD Table with dunning date

    Hi ,
    I developed a report for FI module accessing BSAD table with default customer ranges and for specific dunning dates - It ran for a very long time and timed out - (I know this is due to huge volume of data) -
    Is there any way to access BSAD table easily with Dunning dates (Other than creating Index on it) ???
    Or any standard function module available ??
    Regards
    Rajesh.

    Hi
    Try the below tables for the dunning data details:
    MHND            Dunning Data
    MHNDO           Dunning data version before the next change
    MHNK            Dunning data (account entries)
    MHNKA           Version administration of dunning changes
    MHNKO           Dunning data (acct entries) version before the next chang
    SKS

  • Dunning data updation in FBL5N

    Hi All.
    I have an issue after performing dunning. The "last dunned date", "dunning level"  fields are updated in the master data of customer. The same gets updated in FBL5N customer open items list also. It is updating for  all document types like DR, DG, etc, except for document type RV.The dunning is running correctly. Only problem is the fields updating in FBL5N for RV document type. Can any body help me on this. Is there any customizing where we can change this and get for RV document type also...
    Thanks in advance.
    Anantha Prakash

    dunning update is not dependent from the FI-document-type!
    update is for master data and open item
    pleas check tables BSID and BSEG
    which accounts are booked in RV-document??
    A.

  • Data migration for open PO & PR

    Hi All,
    How to do the data migration for Open PO & Open PR ?
    Thanks
    pabi

    You can BAPI "BAPI_REQUIREMENT_CREATE" for PR creation from data.
    BAPI_PO_CREATE for PO creation.
    Regards
    Sanjay Kohli

  • Questions on data migration....

    Hi all,
    I'm currently facing the problem that my colleagues from the data migration team are about to migrate legacy data to the new system using BDC/LSMW.
    1.) Is it true that the system bypasses any checks concerning number ranges (even if the range doesn't exist at all)? Example: They're about to migrate master inspection characteristics. Let's assume that the old MIC had the number 1234 and the new MIC is supposed to have the number 0001_1234. Do I need to create and assign the external number range?
    2.) If I don't need the number range described under 1.) and I do the migration accordingly (again NO number range created and/or assigned). What would happen if I access this MIC in the future and try to use it in an inspection plan. Would the system reject the usage because there's no number range or would it work normally?
    Any help on this issue is greatly appreciated. Please let me know as well, if I need to post it in a different forum.
    Regards,
    Bobby

    Hi Boban,
    Defining of number ranges before you transfer the masters is must. For numeric titles use SAP std number range for Alphabetic one use external range.
    BR
    Shekhar

Maybe you are looking for