Dunp in standard SAP CRM transaction?

In Transaction CRMD_ORDER while creating moification order from activation order, inside the ITEM Selection TAB in theOBJECT TAB following dump is coming.
Short text
    More than one radio button active
What happened?
    The current screen processing action was terminated since a situation
    occurred where the application could not continue.
    This is probably due to an error in the ABAP program or in the current
    screen.
    While preparing the screen
    "SAPLCRM_SERVICE_ROB_UI" 7102 for screen display, it was detected that in a
     group of radio
    buttons, there is more than one field set.
Error analysis
    In a group of selection fields (radio buttons), there must be always
    exactly one field set, that means, it must have the value 'X'.
    If that is not the case, then one of the following situations occurs:
    - Several selection fields of the group are set simultaneously.
      This is an error and leads to the termination of the application via
      the current short dump.
    - No selection field from the group is set:
      In this case, the first selection field is set by the system before
      screen output. This indicates careless programming of the
      application, but does not lead to an error situation.
How to correct the error
    In this particular case it is about the checkbox
    "CRMT_7102_SRV_REFOBJ_UI-MAIN_OBJECT (2)"
    of the screen
    "SAPLCRM_SERVICE_ROB_UI" 7102 .
    In the group of the selection fields - where this field belongs to -
    another field is set, or even several.
    The application program
    "SAPLCRM_SERVICE_ROB_UI"
    must be corrected, so that it is guaranteed that in every group of
    selection fields, exactly one is set, that means, it has the value 'X'
    The other fields, which are not set, have the value SPACE.

Mukul,
Could this be due to the fact that SAP GUI really isn't supported anymore in CRM 2007 for maintaining business transactions.  You probably need to post this in the CRM general & framework as this is more CRM SAP GUI question that something related to the new release directly.
Take care,
Stephen

Similar Messages

  • Transaction for services SAP CRM

    HI Experts,
    Please provide the document related to Services .
    wat are the different types of services.
    Regards
    Prajith P

    Hi,
    As per my understanding, you a looking for a document which will provide you with the list of Transactions.
    Have a look at the document below:
    [SAP CRM Transaction Codes|http://sapbytes.wordpress.com/2008/12/23/crm-tables-and-transaction-codes/]
    Also, for a detailed Service Processes associated with SAP Service you can have a look at the following:
    [ Service With SAP CRM|http://findpdf.net/pdf-viewer/Service-with-SAP-CRM.html]
    Hope this will help.
    Thanks,
    Samantak.

  • Question regarding Authorizations in SAP CRM 7.0

    Hello,
    The problem is this:
    We have a client who will use two ways of accessing SAP CRM 7.0 data -
    1. CRM Web UI
    2. Mobile devices via standard SAP CRM BAPIs
    Now the situation is that the client wishes to control display authorizations based on the Business Role. Certain Business Roles can allow its User to see Accounts where the User is also Employee Responsible and certain other Business Roles can allow its User to see all those Accounts that are associated with that Role. In summary Business Roles control what an User can see.
    This has already been implemented for the CRM Web UI using the Access Control Engine (ACE).
    Now the questions are:
    1. How do we implement this for BAPI Access?
    2. Should we recreate what has been achieved by ACE, via PFCG Authorization Profiles?
    3. Can we not reuse what has been done by ACE?
    4. What are the runtime APIs that allow somebody to use the authorization checks of ACE?
    5. Does the standard Function Module CRM_ORDER_CHECK_AUTHORITY_ACE help in this regard?
    Any help here will be greatly appreciated. Please let me know if you need any clarifications.
    Thanks in advance.
    Best regards,
    Sudhi

    Hello,
    Normally, some notes are recommended in addition to the current support package implementation because they were developed to solve any known issues. These known issues occurred as side effect of any note which belongs to the implemented support package.
    If you take a look at older release notes, you will see the same.
    This is a part of implementation stack.
    1345085  SAP SRM 7.0 SP Stack 04 (09/2009):Release & Information Note 
    1365574  SAP SRM 7.0 SP Stack 05 (12/2009):Release & Information Note   
    1436687  SAP SRM 7.0 SP Stack 06 (03/2010):Release & Information Note 
    Kind regards,
    Ricardo

  • Connecting SAP CRM (or R/3) to FileNet

    We are implementing a SAP CRM 5.0 system, and FileNet P8 is to be used as the document repository for SAP CRM.
    We are using the FileNet adaptor, called ACSAP for SAP R/3, which allows us to connect to SAP CRM using the generic ArchiveLink functionality. However, we have found that the generic SAP ArchiveLink functionality is very restricted compared with the standard SAP CRM document management (e.g. versioning, creation from templates etc).
    For example the documents tab on a SAP object, such as the business partner, allows users to import or create documents from new or from a template.  The user will be prompted to enter metadata and this document will have a version associated with it and it can be checked in and checked out by the user.  However we are currently using ArchiveLink which requires the user to click "activate ArchiveLink" to create the ArchiveLink folder.  In order to save a document in ArchiveLink the user must then import or create a document in the ArchiveLink folder.  Unfortunately most of the functionality mentioned previously, such as creation from a template and metadata capture, is not available when creating a document in the ArchiveLink folder.  We have also found that due to the lack of metadata the document name is generically assigned and thus is not useful to the user for identification.
    In addition it is not possible to force users to save their documents into ArchiveLink, therefore they are able to save them outside of the required document repository. We have been unable to find a good solution to this problem.
    So we want to know if it is either possible to:
    - Specify that SAP CRM document management use ArchiveLink as its standard document repository?
    - Connect FileNet/ACSAP directly to SAP CRM document management without using ArchiveLink?
    Has anyone had experience connecting SAP CRM (or SAP R/3) to FileNet, and is able to provide us with some insight?
    Thanks
    Philip

    Question was recreated in DMS group. No answer as yet, but hoping to get answers from SAP soon.

  • SAP CRM Incomplete Orders Report

    Hi,
    What is the standard SAP CRM incomplete or open order report in SAP CRM 7.0 ?
    Thanks
    Andy

    I don't think there is any standard report for that. But you can make your own report or view or query in which you display all orders that have system status I1030 (errors).
    Regards.

  • SAP CRM Query

    Hello Folks,
    Please let me know the list of Standard SAP CRM queries. I would like to have a look at them and would like to use them to fit in our project specific scenarion,
    Regards
    DJ

    Hi DJ,
    Can you please clarify or give some more details about  your problem or can you clarify for what are you trying to do.
    Regards,
    Shweta

  • Pop-up screen not showing while accessing transactions in SAP CRM WEB-UI

    When we are logging on SAP CRM WEB UI, for transactions like Lead, Complaints and Activities-
    Sometimes Pop up screen is showing for selecting transaction types, but sometimes it is not showing.
    We have tried it on different work stations with same user id and standard business roles , but we are not able to trace the problem. Also with same id sometimes error shows, "No business roles attached, not allowed to logon,
    after that when we tried on other workstation with same id we were able to access all transactions.
    Please suggest what would be the problem. 
    Rishikesh

    This is sporadically occurring issue hence I cannot pin point one single reason. Since sometimes you are able to logon and some time not certainly it could not be a Role authorization issue.
    Just check if your business role is properly configured. Thats all i can say.
    Regards
    Kavindra

  • How to use ale/idocs in sap crm to transfer master and transactional data

    hi all,
    I am working on sap crm7.0 ehp1. I want to transfer my master and transactional data from crm development system to crm quality system here through idocs. I am aware of basic ale settings and successfully transfe the ztable data through idocs. But i am not able to find any proper step by step procedure for maste and transactional data in sap crm. Also sap ecc tcode NACE is not available here.
    pls help..
    regards,
    kavita chaudhary

    Kavita,
    In CRM, Exchange Interface (XIF) ALE/IDOC is available to transfer master and transaction data. You can go through the following link for set up.
    Basic Data exchange set up for ALE IDocs - Wiki - SCN Wiki
    You can extend the standard XIF IDOCs using Transaction BDFg as well.
    Thanks,
    Ravi

  • To create the follow up transaction automatically on status change in sap crm?

    To create the follow up transaction automatically on status change in sap crm? If yes, how to make the setting for this?

    Hi vishal,
    As per the requirement transaction type is activity(ACTI) & sales order(TA). when the take order objective is complete system automaticaly craete a new activity of tele sales call or metting with wholesaler.
    this is requirement of client.
    now i am already create all type of transaction types of activity & sales order & create follow up transaction also. i have doam already create action profile also but when i am assign this action profile to transaction & try to create an sales order no follow up transaction could be create automatically. i think the condition is not right so please help me out in this. what should be the start & schedulec condition for this scenerio

  • How to Change the filed name in a standard SAP Transaction

    HI all,
    In the SAP Standard Display Vendor Transaction ie in XK03   there is an Screen with the Screen Number 220
    In that Screen Number 220 there is a field by name Account memo
    I need to change that field name Accountmemo to DD Number.
    Please Suggest me how can i do this.
    Please tell me Weather any Screen exits or Badis Exists for this
    Please give me the Sample code if having
    Regards
    Ajay

    It can be done with GuiXT script.
    Read the Documentation, and some time back in 2005 this is Discussed, Search in SDN, Use Key word GuiXT
    http://help.sap.com/saphelp_erp2005/helpdata/en/89/91b9d8194f11d5b3a30050dae02d7c/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/89/91b9d8194f11d5b3a30050dae02d7c/content.htm

  • Calling a Standard SAP transaction VA03 from another web dynpro application

    Hi All,
    I have a requirement wherein I need to call the standard SAP transaction VA03 whenever a sales order is selected in some other we dynpro application so that the sales order gets displayed.
    No regarding usage of OBN for the above functionality I have certain queries:
    1. In order to call VA03 do I need to create a transactional iview for it or is there any direct method.Also how to pass this sales order number as parameter to the T.Code.
    2. Can we use standard business object BUS2032 for OBN or a new Business object is created.What exactly is the purpose of these standard business objects in portal and when should they be used.
    Thanks in advance
    Aman Gupta

    Hi Aman - Do you have a portal team in your project or you have to create the IVIEWS yourself?
    I do have a portal team and I dont know how they create the IVIEWs but for example, I will go to my portal team and I will ask them to create an IVIEW for TCODE VA03, they will created and they will tell me the input parameters they entered for the IVIEW so I can call OBN and display in webdynpro.
    SAP in SRM has webdynpro e.g. for BUS2121 and they have an IVIEW already implemented in the portal context pointing to the webdynpro of BUS2121 so we can used the IVIEW by calling OBN and passing the parameters; in my case the object_type will be 'shc' and the operation will be 'display' and the paremeters itab will be the GUID of my shopping cart, that way the OBN can understand which Shopping cart open and in which operation mode.
    I also did something like your requirement, I need it to display a specific case in Records Management but SAP has a standard IVIEW for records management 'RMREGEDIT' that didn't work for my requirement so I went to SE38 created a program that displayed the case based on GUID and I created a TCODE of my custom program. Portal team created a custom IVIEW of my custom TCODE and they told me the input parameters to call the TCODE in OBN and I pass in the itab parameter the GUID of the case using the FM that I post before.
    The action to call the OBN is in the event handler ON_CLICK of my ALV and the action is getting trigger when the user actually clicks a HYPERLINK in the ALV.
    Hope this helps you!
    Please feel free to ask me more details if you need.
    Jason PV

  • Filtering My Open Task in SAP CRM based on Status, Transaction & Partner Function

    Hello
    Whenever i create a Task in SAP CRM, it displays that transaction in the My Open Task of all Business Partners involved in that Transaction.
    I want to restrict the My Open Tasks based on Transaction Type, Status and Partner Function.
    1) The system should work as it is for all other Tasks but for my Custom Transaction Type the logic should be based on status of the Transaction
    2) When My Open Task component is prepared the system should consider the Status and Partner Function as well i.e. if the status is Approval of Manager, the system should show the Open Task only to the Manager and not other parties.
    3) if the status of the Transaction is Open, the system should only display this Transaction / Task only to Employee Responsible and not to Manager and other people involved in their My Open Tasks.
    I have gone through the following post in SCN:
    https://scn.sap.com/thread/2056959
    I have implemented the method DO_PREPARE_OUTPUT as per the post but it does not do anything. When i redefine the method GET_QUERY_RESULT and remove everything,it does not prepare any list.
    If possible please specify which method needs to be redefined in the component/view CRMCMP_GS_WC/TodaysTasks & if possible please share the code that needs to be maintained in that method.
    Thanks

    Hi,
    Method DO_INIT_CONTEXT should be redefined
    This should be redifined to get the collections with your required filter criteria.
    * get the collection of entities for the tasks
       lr_col      = get_query_result( gc_status-open ).
    If this does not help, Delete the collections which are not required after above selection but before this code.
       me->typed_context->resultnew->collection_wrapper->set_collection( lr_col ).
    Thanks
    Ajay Singh

  • How to add button in standard SAP transaction

    Hi All,
    I would like to know how to add a button in the application toolbar of the standard SAP transaction CO01/CO02. Is there a screen exit for this?
    Hope you can help. Thanks
    Regards,
    April

    Check Enhancment CCOWB001. If not then u can search the below list, all of which are called from the T-code.
    CCOWB001            Customer exit for modifying menu entries                    
    COIB0001            Customer Exit for As-Built Assignment Tool                  
    COZF0001            Change purchase req. for externally processed operation     
    COZF0002            Change purchase req. for externally procured component      
    PPCO0001            Application development: PP orders                          
    PPCO0002            Check exit for setting delete mark / deletion indicator     
    PPCO0003            Check exit for order changes from sales order               
    PPCO0004            Sort and processing exit: Mass processing orders            
    PPCO0005            Storage location/backflushing when order is created         
    PPCO0006            Enhancement to specify defaults for fields in order header  
    PPCO0007            Exit when saving production order                           
    PPCO0008            Enhancement in the adding and changing of components        
    PPCO0009            Enhancement in goods movements for prod. process order      
    PPCO0010            Enhancement in make-to-order production - Unit of measure   
    PPCO0012            Production Order: Display/Change Order Header Data          
    PPCO0013            Change priorities of selection crit. for batch determination
    PPCO0015            Additional check for document links from BOMs               
    PPCO0016            Additional check for document links from master data        
    PPCO0017            Additional check for online processing of document links    
    PPCO0018            Check for changes to production order header                
    PPCO0019            Checks for changes to order operations                      
    PPCO0021            Release Control for Automatic Batch Determination           
    PPCO0022            Determination of Production Memo                            
    PPCO0023            Checks Changes to Order Components                          
    STATTEXT            Modification exit for formatting status text lines

  • Adding field in standard SAP transaction output results.

    Hi,
    I have to add a new field in standard SAP transaction output results.
    Can any one tell me what are the ways (brief explanation) that I can do this?
    If using exists - then what kind of exists I have to use? And how to find out the possibility with user exists?
    Thanks for your time.
    Thanks.
    Chris.

    Hi,
        There are so many ways to find out the user exits.
    Hi,
    To see SAP Exits -> Use Tcode SMOD
    To See create a project for Customer Exits -> Use Tcode CMOD
    There are projects to which Exits are assigned. Selects the relevant projects.
    What is User Exit:
    http://www.sap-img.com/abap/what-is-user-exits.htm
    How to find then:
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    All Exits List:
    http://www.easymarketplace.de/userexit.php
    Do a search on SAP Exits, Customer Exits, enhancements, etc
    Step 1 :- Execute transaction
    step 2 :- Click on Status Menu
    step 3 :- Double click on the program (screen) __?????___
    Step 4 :- Search source code for the 'Customer-Function' string using the find button. Remember to select 'In main program'.
    Step 5 :- A list of search results should be displayed indicating where all function exits can be found.
    You can now double click on each of them to go to its position in the source code. This also
    allows for the insertion of breakpoints so that you can test if the exits are called in the
    appropriate place.
    Step 6 :-Once you have found the Function Exit within the source code (Find Function Exit) you need to
    access the actual function module it executes. This is done using the following steps:
    Step 6.1 :-
    Step 1
    Locate desired 'Call Customer-function' statement within source code.
    Step 2
    If code is not within main program (module pool) e.g. SAP* then you will need to find this
    out by selecting 'Main Program' from the 'GOTO' menu. The Main program for transaction
    Step 3
    The actual function module name can now be calculated based on the information retrieved,
    it is defined by the following format:
    EXIT_<Program name>_<Exit number>
    eg :- 'EXIT_SAPLMR1M_004'.
    Step 7.1:-
    Once you have found the Exit function module
    Step 1
    Execute transaction CMOD
    Step 2
    Select 'SAP Enhancements' from the 'Utilities' menu.
    Step 3
    Select 'All selections' from the 'Edit' menu.
    Step 4
    Now populate the Component name field with the exit function module and press
    the execute button.
    Step 5
    A list of all Exits(Enhancements) containing that function module should now be displayed.
    Step 5
    You can now double click on the desired exit to display a detailed description of its uses and a list of all
    components contained in it.
    Implementing Function Exit
    This is required in-order to activate Function exit:
    Step 1
    The first step is to enter source code into function module in the usual way i.e. via SE37.
    There will already be an include declaration within the code with the following
    format: Include zx*.
    Double click on this to create it, source code can then be entered within here.
    Although it is good practice to create another include with this to store your
    code, this allows separation of difference enhancements allowing them to be easlity
    removed without de-activating the enhancement.
    Step 2
    Execute transaction CMOD and create new Enhancement. Enter name and press the create
    Button.
    Step 3
    The following screen should be displayed, enter short text then click on the 'Enhancement
    Step 4
    Now enter the Exit name (enhancement) which contains the desired Function Exit.
    Step 5
    Return to initial screen of CMOD and press the activate icon. The exit is now ready for use.
    Please Mark The Helfull Answers & close the thread.
    regards
    dj
    reward for all useful answers.

  • How to Call SAP ECC transactions into CRM IC Webclient Profile Screen

    Dear all,
    We are implementing IC Webclient application for our Clientu2019s call center operations.
    All sales related activities are being created in back end SAP ECC system like, starting from Quotation to Sales Order, Deliveries and Billing.
    Client wants to see all relevant ECC reports of Sales transactions in IC Webclient Screen.
    Connectivity between SAP CRM and ECC has already been established and we did all basic configuration for IC Webclient, but donu2019t know how to and where to call ECC transaction in IC Webclient Screen.
    I am looking for suggestions from any of you to handle this requirement successfully. I would be grateful if you send me any documentation which addresses this requirement.
    Your suggestions and help will be highly appreciated.
    Thank you,
    Raghu ram.

    Hi,
    Step-by-step process for the same is as follows:
    1. Create a launch transaction to launch the relevant BOR object at the following
    IMG->CRM->IC WebClient->Basic Functions->Transaction launcher -> Configure Transaction Launcher (Wizard).
    This wizard is very useful and easy way to create a launch transaction and guides through each step and generates a handler class for you.
    2. This transaction now has to be incorporated in the Navigation bar. For this you have to create navigation bar entry and navigation bar profile.
    IMG-> CRM-> IC WebClient->Basic Functions -> Define Navigation Bar Profiles
    Here you have to first Define Entries where you would input Launch transaction ID created in step 1 and then Define the Navigation Bar Profile.
    3. Assign the Navigation bar profile to IC WebClient profile.
    Please note that you can you Transaction launcher for incorporating any web links, PCUI Transactions, CRM Transactions, ERP transactions etc.
    Regards,
    Deepak

Maybe you are looking for