Duplex not recognised when sharing HP 7210 All-in-one using Remote Desktop

The HP 7210 is installed on a Windows 8/64 PC called Harmony.
Duplex unit is correctly detected and a logged on Harmony user can print duplex.
MSTSC is set up with printer sharing and a connection toa remote Windows 7/64 PC called Gerald.
A user logged on to Gerald sees the 7210 and can print.
However, the Duplex unit is not seen from the remote session so only manual duplex is available.
I also notice that in Printing Preferences on Harmony the default to Duplex does not 'stick'.
For example
1.  Set the Fast/Economical printing profile to use the Duplex unit ('Print on Both Sides' set to Automatically).
      Click Apply
2. Set the same for General Everyday Printing
      Click Apply
3.  Re-select the Fast/Economical Printing profile.
      The 'Print on Both sides' setting has changed back to 'Off'.

Generally this is a feature that has to be enabled through the software. If the printer is sharedm, then you will not likely be able to access the duplex options. I would install the printer on the computer you wish to duplex from and make sure that the feature is enabled thorugh the properties/preferences for the printer.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=391153
Let me knwo how this goes!
-Spencer
PS have a wonderful day!

Similar Messages

HP Photosmart 7525 all-in-one, using Mac desktop OSX 10.9.2

My printer will not respond to desktop or otehr commands to print. This is a new problem. The "wireless summary" on the printer says " IP Address: not conected", and SSID: N/A, Wireless Direct: On.
The computer identifies the printer as 192.168.2.12.
The printer referred to 192.168.2.72 or something equally distant.
When I ask the printer to find a wireless router, it identifies mine as it should. I have no idea what the password is or if i ever established one.
This thing was printing several days ago, before I transitionied my ISP from TWC to att.net.
Thsi looks like a ton of frustration for me.
please help.

Hi helped,
Welcome to the HP Forums, I hope you enjoy your experience!
I read your post and since changing the ISP from TWC to AT&,T the printer isn't connecting to the new network.
I will be happy to help you.
Don't worry, this won't be too painful.
On the printer restore the network defaults.
Go to setup, wireless menu, restore network defaults, select yes.
Now we need to find out what encryption you have on your new network. Please write these down.
To check the encryption type, go to the Apple/system preferences/network/click the advanced button/
double click the network name.
(shows WEP or WPA)
To check the network password follow these steps:
On the Apple menu bar, click Go, select applications, utilities, keychain access, double click the network name,
check the box to show the password,type in your Mac password to view it.
Now on the printer you can run the wireless setup.
Go to setup, wireless menu, wireless setup wizard.
Put in your encryption type and password when prompted if you have one.
To add the printer on the Mac, click on the Apple.
Click system preferences, click on printers and scanners, click the + sign at the bottom and select Add Printers and Scanners.
Select the printer from the list, beside Use: click the drop down and select your printer and click add.
Test the printer.
Hope this helps.
Thank you for posting on the HP Forums.
Have a nice day!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HT204368 My iPhone 4s will not recognise my TomTom car kit, so I cannot use any of my 3 TomTom apps. It will not pair, although I have held in the reset button until it beeps, then entered my PIN when instructed.

My new iPhone 4s will not recognise my TomTom car kit, so I cannot use any of my 3 TomTom apps, nor does it give me handsfree as before. It will not pair, although I have held in the reset button until it beeps, then entered my PIN when instructed. It also sometimes gives the message that this device is not supported by iPhone (although I have been using it for several years) with my UK and Ireland, Western Europe, and USA and Canada apps. Just replaced my 4 with a 4S rather than a 5, which won't fit the mounting kit.

From their web site Tom Tom actually offered a converter kit at one point however all it was a 3mm thick bit of plastic with a self adhesive tape backing!
Reference reading here
http://uk.support.tomtom.com/app/answers/detail/a_id/10561/kw/original%20iphone% 20kit

Ipod mini not recognised when connected

When I connect my ipod mini to my laptop the ipod just freezes, and the laptop does not recognise it. Have tried all the suggestions on the ipod mini troubleshooting page and still no luck. Any suggestions?

Since this problem started, have you shut down (powered off) you computer, then started it up again? I assume this iPod worked with this computer before, and it is not working now for some reason...
You can try putting the iPod into Disk Mode
http://support.apple.com/kb/HT1363
then connect it. If that allows iTunes to recognize it, you may want to run a Restore on the iPod from its Summary tab (in iTunes). This will erase the iPod, re-install its software, and set it to default settings.

Password not recognised when I sign in to redeem iTunes card?

password not recognised when I sign in to redeem iTunes card?

iOS: Troubleshooting Messages
FaceTime, Game Center, Messages: Troubleshooting sign in issues
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

HT2305 My windows 8 laptop not recognising when I connect my iPad

My windows 8 laptop not recognising when I connect my iPad

iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: iTunes can’t contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/ts1814
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/ts4062
iOS: “Not enough free space” alert when trying to sync
http://support.apple.com/kb/ts1503
You may need to delete iTunes on your computer and then reinstall.
How To Completely Uninstall and Remove All Traces of iTunes
http://zardozz.com/zz/2008/04/how-to-completely-uninstall-and-remove-all-traces- of-itunes.html/
 Cheers, Tom

The pass 4 days now my iTunes Store is not responding, when I reload it all that comes up is a blank white page that says iTunes Store. Help please!!!! Cannot load my gift card to buy music and such!!!

The pass 4 days now my iTunes Store is not responding, when I reload it all that comes up is a blank white page that says iTunes Store. Help please!!!! Cannot load my gift card to buy music and such!!!

I tookyour suggestion and SUCCESS! I can now access the Itunes Store. A simple fix, and thanks so much!!.
Below is the advice you forwarded:
I found a solution to my problem.
> start menu
> accessories,
> right click on the command prompt icon and choose "run as administrator".
Once it opens, type in the following command...
netsh winsock reset
hit enter
You should get a message that the winsock reset successful and you will need to reboot your computer.
Reboot and when I reloaded itunes the store loaded fine.
Thanks again, -Dean Stoneburner

While updating the software from 6.1.3 to 6.1.4 on iPhone 5, the power failed. iTunes had just finished the backup and was beginning the software update. Now the phone screen says to connect to iTunes but the phone is not recognised when plugged in.

While updating the iPhone 5 software from 6.1.3 to 6.1.4, the power failed. iTunes had just finished the backup and was beginning the software update. Now the phone screen says to connect to iTunes but the phone is not recognised when plugged in. Using Windows 7 and phone not recognised by computer, let alone by iTunes.
Any suggestions? Happy to take it off to the the Apple genius people but would prefer to get it running myself.
Regards.

Try this
iOS: Device not recognized in iTunes for Windows

HT203254 my desktop is not working when i open it all it does is show the color weal and it never gos away on my mac book pro how do i fix it?

my desktop is not working when i open it all it does is show the color weal and it never gos away on my mac book pro how do i fix it?

It means, tentatively, that system files are missing or damaged and you will have to reinstall Snow Leopard. See the following:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

Although it has worked well so far today i-photo on my Mac does not recognise when I plug in my Sony camera so I can't download the video I just made.

Although it has worked well so far today i-photo on my Mac does not recognise when I plug in my Sony camera so I can't download the video I just made.

Although it has worked well so far today i-photo on my Mac does not recognise when I plug in my Sony camera so I can't download the video I just made.
Sometimes this happens, because the camera is not properly charged. In that case connect the camera to a charger or use a card reader.

The 'Do Not Email' when sharing a Document does not always allow a check mark to be entered.

The 'Do Not Email' when sharing a Document does not always allow a check mark to be entered.
Just wanted to report this. I have not checked to see if it has been previously submitted. The issue
is intermittent.

I think this happens because you need to send e-mail when you do the first contact with the user. Tellimg him who you are and etc.
When you already "know" that user, u can check the box.
Hope it helps,
Andrey Farias

HT204053 I have an Apple ID and use I Cloud with my Ipad and Iphone. I am trying to publish a website from my macbook but my user name and password is not recognised when I try?

I have an Apple ID and use I Cloud with my Ipad and Iphone. I am trying to publish a website from my macbook but my user name and password is not recognised when I try?

Ken.Lloyd wrote:
Sorry for the delay. System preferences icloud is not an option for me. Syst preferences mobileme is
The minimum requirement for iCloud is Lion 10.7.2 - earlier systems don't show the iCloud preference pane. If you want to use iCloud you will have to upgrade to Lion or Mountain Lion (assuming your computer meets their requirements) but even so you won't be able to publish web pages to iCloud because it does not provide web hosting. This page examines that situation in more detail:
http://rfwilmut.net/missing2

My apple ID is not recognised when I try to sign into the cloud, any help?

My apple ID is not recognised when I try to sign into the cloud, any help?

You can't sign into iCloud using your Apple ID on a PC, you have to sign in with an existing iCloud ID. You have to first create your iCloud account on an iOS device or Mac. Then you can sign in with the ID on your PC.

I have an HP Officejet 7210 all in one printer, have loaded Printer Pro to IPad, get successful test pages in the Print Pro App but can't print emails (or anything). error message is No AirPrinter found. How can I get connected?

I have an HP OfficeJet 7210 all in one printer, have loaded Printer Pro and had a successful test while in Printer Pro. When I try to print and email I get NO AIR PRINTER message, How can I connect my printer to my IPad and print emails.

Welcome to Apple Support Communities.
If you're using the Printer Pro app, you're not going to use AirPrint services.
They are not the same thing.
Are you using the 'Open In' option to get the email into Printer Pro for printing?
http://itunes.apple.com/us/app/printer-pro/id393313223?mt=8
Once installed, Printer Pro appears in the "Open In..." list on your device. This lets you print documents from Mail, Safari, ReaddleDocs and many other applications on your iPad that supports this function.
Using "Open In..." approach you can print files from many popular online storages: Dropbox, MobileMe iDisk, GoogleDocs. It just a matter of several taps to download your file via free Dropbox, iDisk or Google Docs application and send it to printer.

Fax issue with HP OfficeJet 7210 All-in-one

Hi everyone,
I've got an issue with my HP OfficeJet 7210 All-in-one printer/fax (USB connection)
I'm under Mac OS X 10.5 (Leopard).
When I was under Tiger, my printer/fax worked properly.
After the upgrade to Leopard, the printer/fax was still installed (HP 7210 was displayed as installed in the printer list of the System Preferences).
The printer works fine but the fax doesn't ! An error consistenly occurs when I try to send a fax.
Thus, I decided to uninstall every HP components from my Mac. Then I proceeded a fresh install of the CD software/driver I received with my printer/fax.
During the installation, I get an error : "HP AIO TRAP has quit". I went further and continue the installation till the end by ignoring the problem.
The printer is still working fine but I'm unable to install my fax in the System Preferences because the fax simply doesn't appear either on the "Fax" tab or on the "More printer" tab.
Only an unuseful "Bluetooth" fax appear, I can install it but it's impossible to send a fax with it : http://users.cybernet.be/ptsalos/hp-leo1.png
In the "More printer" tab I got this : http://users.cybernet.be/ptsalos/hp-leo2.png ... It seems that no fax are detected (no fax are displayed in "HP AiO Télécopie" and the "Add" button is gray).
I hope you could help me !
PS: the fax works properly under Bootcamp with Windows XP PRO SP2
Thank you very much.
Message was edited by: phl00

OK, so enough software is available (or will so been available) for me to start posting these types of workarounds (and getting more of you up and running). And remember, what I am about to tell you is NOT supported by HP, so if you run into problems doing this do NOT call customer support. I am posting this stuff here to try to help out the community. I will stop posting if this gets abused (even once).
If you have an HP OfficeJet 7310 or 7210 printer, go to HP.com/support, tell it you have a 7410, and download the installer (follow my instructions on the [Beta Announcement|http://discussions.apple.com/thread.jspa?threadID=1252889&tstart=0 ] thread if you need more details.
Now follow these instructions:
Step 1: Run the installer, and follow the onscreen prompts.
Step 2: When the screen comes up to select your printer, check the box my printer isn't listed and continue.
Step 3: On the next screen select the OfficeJet 7400 Series and continue.
Step 4: Select the type of connectivity to your device.
Step 5: Install the software (this may take several minutes).
Step 6: When you get to the Setup Assistant, skip it. Make sure you de-select the two checkboxes before you continue otherwise it will remind you every time you log in.
Step 7: Go into the Print & Fax System Preference and manually add your print queue.
Step 8: Go into the Print & Fax System Preference and manually add your fax queue.
Step 9: Start using your device.
Congratulations, you now should have a fully functioning device under Leopard. So what won't work with this work around:
1) The documentation on your device will be wrong.
2) If you did not previously set up a station ID for the fax, one will not be set.
3) Device Manager will not know anything about your device so the functionality there will be pretty useless (most stuff can be done through other means though). However if you already have a Tiger install, even this should (theoretically work).
4) Good question, if you run into any other issues post them here, I may have forgotten something.
WARNING! WARNING! WARNING!
Please install the final drivers when they come out, and preferable the beta drivers too for your device too! Just because things are working for you does not mean that this configuration is supported (its not) or that there aren't any known problems (there may be, we certainly don't test it) so please take caution and update when possible.
Just trying to help.
Andrew

Duplex not recognised when sharing HP 7210 All-in-one using Remote Desktop

Similar Messages

Maybe you are looking for