Duplicate Call on Gatekeeper with CME
Hi,
I have an architecture with 2 CME.
CME A is connected to a gatekeeper and there is no problem when users make some calls.
CME B is not directly connected to the gatekeeper but when a user call an other one on the CME A, I can see the call on the gatekeeper.
Moreover, if a user on CME B try to call a user that is not on the CME A, the call will be forwarded to the gatekeeper and in this case, I have a duplicate call on the gatekeeper.
I have the following dial-peer on the CME B:
voice dial-peer 10 voip
destination-pattern XXXXX
session target ipv4:X.X.X.X (CME A)
On the CME A, I have an incoming dial-peer for CME B calls and an outgoing dial-peer for every call to the gatekeeper (session target ras).
Could you help me to fixe this problem ? I tried to use 2 different loopback interfaces but the problem is still there.
Thank you in advance
Vincent
Hi,
I tried the configurations but it did not change my problem.
I still can see the call on the gatekeeper:
Total number of active calls = 1.
GATEKEEPER CALL INFO
====================
LocalCallID Age(secs) BW
1066-17702 3 16(Kbps)
Endpt(s): Alias E.164Addr
src EP: 0001
Endpt(s): Alias E.164Addr
dst EP: TRUNK_CME_A 0002
CallSignalAddr Port RASSignalAddr Port
10.206.48.236 1720 10.206.48.236 52937
Any other idea ?
Thanks
Vincent
Similar Messages
-
Porr Voice on outside call with CME using 7902 & 7970
Dear All,
i'm working on a simple configuration.
I'm using a 2801 with 14.4.t1 for CME 3.4.
All is working fine inside, so i can call without problems others CME users.
The problems come when i call outside trought a BRI, with these calls i hear a lot of noise...any tips?
Here mye config:
dial-peer voice 1 pots
description ** BRI pots dial-peer **
destination-pattern 0113
port 0/0/0
forward-digits 3
dial-peer voice 2 pots
description ** BRI pots dial-peer **
destination-pattern 0T
port 0/0/0
dial-peer voice 3 pots
description ** BRI pots dial-peer **
incoming called-number .
direct-inward-dial
port 0/0/0
dial-peer voice 4 pots
description ** BRI pots dial-peer **
destination-pattern 0113
port 0/0/1
forward-digits 3
dial-peer voice 5 pots
description ** BRI pots dial-peer **
destination-pattern 0T
port 0/0/1
dial-peer voice 6 pots
description ** BRI pots dial-peer **
incoming called-number .
direct-inward-dial
port 0/0/1
dial-peer voice 7 pots
description ** BRI pots dial-peer **
destination-pattern 0113
port 0/1/0
forward-digits 3
dial-peer voice 8 pots
description ** BRI pots dial-peer **
destination-pattern 0T
port 0/1/0
dial-peer voice 9 pots
description ** BRI pots dial-peer **
incoming called-number .
direct-inward-dial
port 0/1/0
dial-peer voice 10 pots
description ** BRI pots dial-peer **
destination-pattern 0113
port 0/1/1
forward-digits 3
dial-peer voice 11 pots
description ** BRI pots dial-peer **
destination-pattern 0T
port 0/1/1
dial-peer voice 12 pots
description ** BRI pots dial-peer **
incoming called-number .
direct-inward-dial
port 0/1/1
telephony-service
load 7902 CP7902060000SCCP050124A.sbin
load 7971 TERM70.7-0-1-0s.LOADS
load 7970 TERM70.7-0-1-0s.LOADS
max-ephones 24
max-dn 72
ip source-address 10.0.0.1 port 2000
system message xxxxxx
user-locale IT
network-locale IT
time-zone 23
time-format 24
date-format dd-mm-yy
create cnf-files version-stamp 7960 Feb 21 2006 23:25:25
voicemail 6000
max-conferences 8 gain -6
call-forward pattern .T
moh music-on-hold.au
web admin system name admin@local password admin
dn-webedit
time-webedit
transfer-system full-consult
directory last-name-first
ephone-dn 1
number 101 secondary 269969201
label 101
description Interno 101
name Interno 101
ephone-dn 2
number 102 secondary 269969201
label 102
description Interno 102
name Interno 102
ephone-dn 3
number 103 secondary 269969201
label 103
description Interno 103
name Interno 103
ephone 1
username xxxx password xxx
mac-address xxxx
speed-dial 1 102 label "Interno 102"
type 7971
button 1:1
ephone 2
username xxxx password xxx
mac-address xxxx
type 7902
button 1:2
ephone 3
username xxxx password xxxx
mac-address xxxxx
type 7902
button 1:3Try adding the following commands -
network-clock-participate wic 0
network-clock-participate wic 1
network-clock-select 1 bri 0/0/0
network-clock-select 2 bri 0/1/0
This will ensure the DSP's use the same clock reference that is coming in on the BRI ports. This often clears up voice issues on Basic Rate Interfaces. -
CMM 4.13sr3c and CME3.3
I am not using hardware gatekeeper at all.
At CCM, I created Trunk(not gatekeeper controlled), and route group, list and pattern. I can make a call to CME's phone without any problem.
At CME:
voice class codec 1
codec preference 1 g711ulaw
codec preference 2 g729r8
voice class h323 1
h225 timeout tcp establish 3
dial-peer voice 1000 voip
destination-pattern [12]...
voice-class codec 1
voice-class h323 1
session target ipv4:10.0.0.21 (Sub)
dtmf-relay h245-alphanumeric
dial-peer voice 1001 voip
preference 1
destination-pattern [12]...
voice-class codec 1
voice-class h323 1
session target ipv4:10.0.0.20 (Pub)
dtmf-relay h245-alphanumeric
I could not call from CME to CCM, I got fast busy.
Thanks for help.
KenI would check if the phones in CCM you are calling is in a partition, then the Trunk in CM should have a Inbound call CSS set with access to that partition.
HTH
Sankar.
PS: please remember to rate posts! -
Blackberry registeration with CME
hi all,
I want to know whether one can install the client on blackberry phone same as nokia e71 and register the blackberry phone with cme via wifi. Can somebody provide the link for the documentation
Regards
NarehIt seems BlackBerry launched complete product - the BlackBerry® Mobile Voice System that can be integrated with CME:
http://na.blackberry.com/eng/services/business/blackberry_mvs/
Here is Configuration Guide:
http://docs.blackberry.com/en/admin/deliverables/20062/BlackBerry_Mobile_Voice_System-Configuration_Guide--1079341-0901073810-001-5.0.1-US.pdf
What I have noticed from document is that "the BlackBerry® Mobile Voice System integrates your organization's PBX phone system with the BlackBerry® Enterprise Server to extend desk phone features to BlackBerry devices". In other words you will need BlackBerry® Enterprise Server working as well for the system to function.
So I guess to install all it if you have only couple of BlackBerry phones is senseless.
I'm curious if it would be possible to use without BlackBerry® Enterprise Server having just simple client on the phone like Nokia Call Connect, for instance with Nokia E-series phones. -
How to limit incoming call on B-ACD CME?
I have configure B-ACD on CME 4 and its working. But I have a problem with incoming call from outside (PSTN). I set queue-len for 30 queue. But on busy hour, some call hear only ring tone. No greeting tone or busy tone. When I check call session, its only 10 or 15 session.
How to limit incoming call, let say, for 10 calls only? The 11th call will receive busy tone.
Here are my config:
application
service queue flash:app-b-acd-2.1.2.2.tcl
param queue-len 30
param queue-manager-debugs 1
param number-of-hunt-grps 1
param aa-hunt2 0
service aa flash:app-b-acd-aa-2.1.2.2.tcl
paramspace english index 1
param number-of-hunt-grps 1
param handoff-string aa
param dial-by-extension-option 1
paramspace english language en
param max-time-vm-retry 1
param max-extension-length 7
param aa-pilot 2999
paramspace english location flash:
param second-greeting-time 30
param welcome-prompt _bacd_welcome.au
param call-retry-timer 15
param max-time-call-retry 60
param voice-mail 0
param service-name queue
FYI: I have no voice mail. 'param voice-mail 0' is to send unanswered call to my operator.
Regards,
IwanHi Iwan,
To restrict the number of calls to the application you need to configure only the appropriate number (10 in your example) of dial-peers to point to the AA Pilot number. Have a look;
Set Up Incoming Dial Peers for AA Pilot Numbers
In this task, you associate dial peers for incoming calls with the AA service that you want them to use.
Cisco Unified CME B-ACD is available for outside calls through voice ports and trunks, for which dial peers must be set up. When you set up a dial peer, you use the service command to associate it with the name of the Cisco Unified CME B-ACD AA service that you want callers to that dial peer to reach.
Note You must configure a dial peer for each incoming DID voice port.
To determine how many ports or trunks you must have for your Cisco Unified CME B-ACD service, consider the following:
Total number of phones across all ephone hunt groups
Total number of slots in the queues across all queues
Total number of PSTN ports feeding into the queues
The number of simultaneous calls that Cisco Unified CME B-ACD can handle is limited by the number of PSTN ports, but these ports may not always be in use. For example, you could have three queues with ten slots per queue, but configure only 10 ports instead of 30 because you do not expect the three queues to ever be full at one time.
From this good doc;
http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_configuration_guide_chapter09186a00805f2305.html#wp1003323
Hope this helps!
Rob -
Does Cisco CP-8831 work with CME
Hello
Does Cisco CP-8831 phone work with the Call Manager Express
Thanks
MohamedAs of now no.
http://www.cisco.com/en/US/prod/collateral/voicesw/ps6788/phones/ps12965/data_sheet_c78-726887.html
"Supported on Cisco Unified Communications Manager and Business Edition systems"
There is a defect open that the 8831 datasheet is incorrect with CME 10.0 support for the 8831 (https://tools.cisco.com/bugsearch/bug/CSCui95307/). -
I have a Macbook Pro running Leopard 10.5.8. I had a problem with my my operating system (my fault, I moved a file I shoudnt have) couldnt boot up but was able to boot up from a backup. I managed to repair my original system except now all the system folders, including hidden folders are littered with duplicate folders and files with the suffix (from old Mac). For the most part the dupes are an exact copy, but not always. I want to remove them to free up space and cant imagine duplicate folders in the /system/library are not hindering my computer. But I dont know where to start and am afraid of doing irreparable damage. Any ideas
pacull,
Use iCal>View>Show Notifications to choose what to do with the notification. -
How to call PDF Report with parameters in jdeveloper 10.1.3
Hi all,
how to call PDF Report with parameters in jdeveloper 10.1.3
for example I have Report name is repdept.pdf with parameter as deptno
and I want call this Report from JSP page ?
thanks
frankHi all,
how to call PDF Report with parameters in jdeveloper 10.1.3
for example I have Report name is repdept.pdf with parameter as deptno
and I want call this Report from JSP page ?
thanks
frank -
I am experiencing this error with one of our cluster environment. Can anyone help me in this issue.
The Cluster Service function call 'ClusterResourceControl' failed with error code '1008(An attempt was made to reference a token that does not exist.)' while verifying the file path. Verify that your failover cluster is configured properly.
Thanks,
Venu S.
Venugopal S ----------------------------------------------------------- Please click the Mark as Answer button if a post solves your problem!Hi Venu S,
Based on my research, you might encounter a known issue, please try the hotfix in this KB:
http://support.microsoft.com/kb/928385
Meanwhile since there is less information about this issue, before further investigation, please provide us the following information:
The version of Windows Server you are using
The result of SELECT @@VERSION
The scenario when you get this error
If anything is unclear, please let me know.
Regards,
Tom Li -
SSRS 2008 R2 - Using Action to call a report with MultiValue Parameters
I have a report uses project names as parameter(Multi value) and display some data. I want to call this report from some other report on a click (drill down). This report has a program row where it aggregates the data, underneath Programs, I have
list of projects(group). When I use Action on the individual projects, it takes me to the appropriate project ( I used
Fields!ProjectName.Value). However, when user clicks on the program, it should pass the group of projects within that program to the called report. With expression, Fields!ProjectName.Value, it only select one random project (may be first/last from
the query) and display records. I tried Join(Fields!ProjectName.Value, ",") and Fields!ProjectName.Value(0) but now it doesn't select a sengle project. Can someone help please?use In instead =
-
Calling a method with a string
Here's the question:
I want to call a method with the name equal to a string variable.
For example, if the string variable contains "hellojava" , i'd like the hellojava() method to be called..
if the string contains "error", the error() method should be called..
and so on..:)Here is an example I had thrown together for this
purpose of the exact demonstration, Ar'nt you in luck.:-). If there is anything you don't understand,
I can be reached at [email protected] and will be happy to help....
import java.lang.reflect.*;
import java.io.*;
class Test {
String name = "Default";
public Test(String name) {
this.name = name;
public void test() {
System.out.println("Hello");
public void count() {
for(int i=0; i<10; i++) {
System.out.println(i);
public static void main(String[] args) {
try {
Test myObject = new Test("test1");
Class myClass = myObject.getClass();
BufferedReader bRead =
new BufferedReader(
new InputStreamReader( System.in ));
String bufStr = null;
while( (bufStr = bRead.readLine()) != "exit") {
Method noParams = myClass.getDeclaredMethod(bufStr, new Class[] {});
noParams.invoke(myObject, new Object[] {});
}catch(Exception e) {
System.out.println("No Such Method.");
}Good Luck,
-- Ian -
Calling a method with parameters in jstl?
i need to call a method with a series of String parameters what am i doing wrong?
the java
public ArrayList getEmployeeSkills(String ename, String snmae, String yearsexp)the jstl
<jsp:useBean id="empskill" class="com.Database.EmployeeSkill"/>
<c:forEach var="emp" items="${empskill.EmployeeSkills(null, null, null)}">
</c:forEach>this works:
<jsp:useBean id="empskill" class="com.Database.EmployeeSkill" scope="page">
<jsp:setProperty name="empskill" property="ename" value="Helen Smith"/>
<jsp:setProperty name="empskill" property="sname" value="Java"/>
</jsp:useBean>but this part isnt:
<c:forEach var="empskill" items="${empskill.EmployeeSkillsReport}">
</c:forEach>ive removed the get part from the method as i have done before from the java class it is calling:
public ArrayList getEmployeeSkillsReport()
but it produces:
org.apache.jasper.JasperException: Exception in JSP: /main.jsp:146
143: </jsp:useBean>
144:
145:
146: <c:forEach var="empskill" items="${empskill.EmployeeSkillsReport}">
147: </c:forEach>
148:
149:
Stacktrace:
org.apache.jasper.servlet.JspServletWrapper.handleJspException(JspServletWrapper.java:506)
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:377)
org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
root cause
javax.servlet.ServletException: An error occurred while evaluating custom action attribute "items" with value "${empskill.EmployeeSkillsReport}": Unable to find a value for "EmployeeSkillsReport" in object of class "com.Database.EmployeeSkill" using operator "." (null)
org.apache.jasper.runtime.PageContextImpl.doHandlePageException(PageContextImpl.java:843)
org.apache.jasper.runtime.PageContextImpl.handlePageException(PageContextImpl.java:776)
org.apache.jsp.main_jsp._jspService(main_jsp.java:244)
org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)
javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:334)
org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
root cause
javax.servlet.jsp.JspException: An error occurred while evaluating custom action attribute "items" with value "${empskill.EmployeeSkillsReport}": Unable to find a value for "EmployeeSkillsReport" in object of class "com.Database.EmployeeSkill" using operator "." (null)
org.apache.taglibs.standard.lang.jstl.Evaluator.evaluate(Evaluator.java:109)
org.apache.taglibs.standard.lang.jstl.Evaluator.evaluate(Evaluator.java:129)
org.apache.taglibs.standard.lang.support.ExpressionEvaluatorManager.evaluate(ExpressionEvaluatorManager.java:75)
org.apache.taglibs.standard.tag.el.core.ForEachTag.evaluateExpressions(ForEachTag.java:155)
org.apache.taglibs.standard.tag.el.core.ForEachTag.doStartTag(ForEachTag.java:66)
org.apache.jsp.main_jsp._jspx_meth_c_forEach_3(main_jsp.java:590)
org.apache.jsp.main_jsp._jspService(main_jsp.java:232)
org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)
javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:334)
org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
javax.servlet.http.HttpServlet.service(HttpServlet.java:802) -
Coldfusion 11 java/jre ssl mutual auth api calls. Help with coldfusion/java logs.
Hello,
I am here because I have exhausted my Coldfusion/Java ssl keystore certs trouble shooting abilities. Here is the issue. I am developing a Coldfusion 11 application that must make api calls to Chase payconnexion SOAP services. I am using the coldfusion cfhttp tags to do this, which is using the java jre 1.7.x to accomplish this. The problem, I am getting generic 500 internal server errors from Chase. They claim that I am not sending a cert during the ssl exchange. What I have done is:
- put our wildcard cert/key pair in the coldfusion keystore
- put our root and chain in the keystore
- put the chase server cert in the keystore
- converted the key/crt files to .pfx and make the calls
to chase with those, something like:
<cfset objSecurity = createObject("java", "java.security.Security") />
<cfset storeProvider = objSecurity.getProvider("JsafeJCE")/>
<cfset Application.sslfix = true />
<cfhttp url="#chase_api_server#/"
result="http_response"
method="post"
port="1401" charset="utf-8"
clientCert = "#cert_path#/#cert_file1#"
clientCertPassword = "#cert_password#">
<cfhttpparam type="header" name="SOAPAction" value="updateUserProfileRequest"/>
<cfhttpparam type="header" name="Host" value="ws.payconnexion.com" />
<cfhttpparam type="xml" value="#trim(my_xml)#"/>
</cfhttp>
Here is what I see in the Cf logs, can anyone help me interpret what
is happening ??
Thanks,
Bob
=============================================================
found key for : 1
chain [0] = [
Version: V3
Subject: CN=*.payments.austintexas.gov, O=City of Austin, L=Austin, ST=Texas, C=US
Signature Algorithm: SHA1withRSA, OID = 1.2.840.113549.1.1.5
Key: Sun RSA public key, 2048 bits
modulus: <snip>
Validity: [From: Mon Aug 11 12:39:37 CDT 2014,
To: Thu Sep 01 18:34:24 CDT 2016]
Issuer: CN=Entrust Certification Authority - L1C, OU="(c) 2009 Entrust, Inc.", OU=www.entrust.net/rpa is incorporated by reference, O="Entrust, Inc.", C=US
SerialNumber: [<snip>7]
Certificate Extensions: 9
[1]: ObjectId: 1.3.6.1.5.5.7.1.1 Criticality=false
AuthorityInfoAccess [
accessMethod: ocsp
accessLocation: URIName: http://ocsp.entrust.net
accessMethod: caIssuers
accessLocation: URIName: http://aia.entrust.net/2048-l1c.cer
[2]: ObjectId: 2.5.29.35 Criticality=false
AuthorityKeyIdentifier [
KeyIdentifier [
<snip>]
[3]: ObjectId: 2.5.29.19 Criticality=false
BasicConstraints:[
CA:false
PathLen: undefined
[4]: ObjectId: 2.5.29.31 Criticality=false
CRLDistributionPoints [
[DistributionPoint:
[URIName: http://crl.entrust.net/level1c.crl]
[5]: ObjectId: 2.5.29.32 Criticality=false
CertificatePolicies [
[CertificatePolicyId: [1.2.840.113533.7.75.2]
[PolicyQualifierInfo: [
qualifierID: 1.3.6.1.5.5.7.2.1
qualifier: <snip>
[CertificatePolicyId: [2.23.140.1.2.2]
[6]: ObjectId: 2.5.29.37 Criticality=false
ExtendedKeyUsages [
serverAuth
clientAuth
[7]: ObjectId: 2.5.29.15 Criticality=false
KeyUsage [
DigitalSignature
Key_Encipherment
[8]: ObjectId: 2.5.29.17 Criticality=false
SubjectAlternativeName [
DNSName: *.payments.austintexas.gov
DNSName: payments.austintexas.gov
[9]: ObjectId: 2.5.29.14 Criticality=false
SubjectKeyIdentifier [
KeyIdentifier [
<snip>]
Algorithm: [SHA1withRSA]
Signature:
<snip>
chain [1] = [
Version: V3
Subject: CN=Entrust Certification Authority - L1C, OU="(c) 2009 Entrust, Inc.", OU=www.entrust.net/rpa is incorporated by reference, O="Entrust, Inc.", C=US
Signature Algorithm: SHA1withRSA, OID = 1.2.840.113549.1.1.5
Key: Sun RSA public key, 2048 bits
modulus: <snip>
public exponent: 65537
Validity: [From: Fri Nov 11 09:40:40 CST 2011,
To: Thu Nov 11 20:51:17 CST 2021]
Issuer: CN=Entrust.net Certification Authority (2048), OU=(c) 1999 Entrust.net Limited, OU=www.entrust.net/CPS_2048 incorp. by ref. (limits liab.), O=Entrust.net
SerialNumber: [ <snip>]
Certificate Extensions: 7
[1]: ObjectId: 1.3.6.1.5.5.7.1.1 Criticality=false
AuthorityInfoAccess [
accessMethod: ocsp
accessLocation: URIName: http://ocsp.entrust.net
[2]: ObjectId: 2.5.29.35 Criticality=false
AuthorityKeyIdentifier [
KeyIdentifier [
<snip>]
[3]: ObjectId: 2.5.29.19 Criticality=true
BasicConstraints:[
CA:true
PathLen:0
[4]: ObjectId: 2.5.29.31 Criticality=false
CRLDistributionPoints [
[DistributionPoint:
[URIName: http://crl.entrust.net/2048ca.crl]
[5]: ObjectId: 2.5.29.32 Criticality=false
CertificatePolicies [
[CertificatePolicyId: [2.5.29.32.0]
[PolicyQualifierInfo: [
qualifierID: 1.3.6.1.5.5.7.2.1
qualifier: <snip>
[6]: ObjectId: 2.5.29.15 Criticality=true
KeyUsage [
Key_CertSign
Crl_Sign
[7]: ObjectId: 2.5.29.14 Criticality=false
SubjectKeyIdentifier [
KeyIdentifier [
<snip>]
Algorithm: [SHA1withRSA]
Signature:
<snip>
chain [2] = [
Version: V3
Subject: CN=Entrust.net Certification Authority (2048), OU=(c) 1999 Entrust.net Limited, OU=www.entrust.net/CPS_2048 incorp. by ref. (limits liab.), O=Entrust.net
Signature Algorithm: SHA1withRSA, OID = 1.2.840.113549.1.1.5
Key: Sun RSA public key, 2048 bits
modulus: <snip>public exponent: 65537
Validity: [From: Fri Dec 24 11:50:51 CST 1999,
To: Tue Jul 24 09:15:12 CDT 2029]
Issuer: CN=Entrust.net Certification Authority (2048), OU=(c) 1999 Entrust.net Limited, OU=www.entrust.net/CPS_2048 incorp. by ref. (limits liab.), O=Entrust.net
SerialNumber: [<snip>]
Certificate Extensions: 3
[1]: ObjectId: 2.5.29.19 Criticality=true
BasicConstraints:[
CA:true
PathLen:2147483647
[2]: ObjectId: 2.5.29.15 Criticality=true
KeyUsage [
Key_CertSign
Crl_Sign
[3]: ObjectId: 2.5.29.14 Criticality=false
SubjectKeyIdentifier [
KeyIdentifier [
<snip>]
Algorithm: [SHA1withRSA]
Signature:
<snip>
trustStore is: /opt/coldfusion11/jre/lib/security/cacerts
trustStore type is : jks
trustStore provider is :
init truststore
adding as trusted cert:
<snip 85 certs>
trigger seeding of SecureRandom
done seeding SecureRandom
Jan 23, 2015 13:15:37 PM Information [ajp-bio-8014-exec-7] - Starting HTTP request {URL='https://ws.payconnexion.com:1401/pconWS/9_5/', method='post'}
Ignoring unsupported cipher suite: TLS_DHE_DSS_WITH_AES_128_CBC_SHA256
Ignoring unsupported cipher suite: TLS_DHE_DSS_WITH_AES_256_CBC_SHA256
Ignoring unsupported cipher suite: TLS_DHE_RSA_WITH_AES_128_CBC_SHA256
Ignoring unsupported cipher suite: TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256
Ignoring unsupported cipher suite: TLS_DHE_RSA_WITH_AES_256_CBC_SHA256
Ignoring unsupported cipher suite: TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384
Ignoring unsupported cipher suite: TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA384
Ignoring unsupported cipher suite: TLS_RSA_WITH_AES_256_CBC_SHA256
Ignoring unsupported cipher suite: TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256
Ignoring unsupported cipher suite: TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384
Ignoring unsupported cipher suite: TLS_ECDH_RSA_WITH_AES_256_CBC_SHA384
Ignoring unsupported cipher suite: TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256
Ignoring unsupported cipher suite: TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256
Ignoring unsupported cipher suite: TLS_RSA_WITH_AES_128_CBC_SHA256
Allow unsafe renegotiation: true
Allow legacy hello messages: true
Is initial handshake: true
Is secure renegotiation: false
%% No cached client session
*** ClientHello, TLSv1
RandomCookie: GMT: 1405197529 bytes = { 191, 115, 95, 85, 79, 234, 145, 176, 62, 70, 36, 102, 168, 15, 127, 174, 88, 118, 4, 177, 226, 5, 254, 55, 108, 203, 80, 80 }
Session ID: {}
Cipher Suites: [TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA, TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA, TLS_RSA_WITH_AES_256_CBC_SHA, TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA, TLS_ECDH_RSA_WITH_AES_256_CBC_SHA, TLS_DHE_RSA_WITH_AES_256_CBC_SHA, TLS_DHE_DSS_WITH_AES_256_CBC_SHA, TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA, TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA, TLS_RSA_WITH_AES_128_CBC_SHA, TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA, TLS_ECDH_RSA_WITH_AES_128_CBC_SHA, TLS_DHE_RSA_WITH_AES_128_CBC_SHA, TLS_DHE_DSS_WITH_AES_128_CBC_SHA, TLS_ECDHE_ECDSA_WITH_RC4_128_SHA, TLS_ECDHE_RSA_WITH_RC4_128_SHA, SSL_RSA_WITH_RC4_128_SHA, TLS_ECDH_ECDSA_WITH_RC4_128_SHA, TLS_ECDH_RSA_WITH_RC4_128_SHA, TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA, TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA, SSL_RSA_WITH_3DES_EDE_CBC_SHA, TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA, TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA, SSL_DHE_RSA_WITH_3DES_EDE_CBC_SHA, SSL_DHE_DSS_WITH_3DES_EDE_CBC_SHA, SSL_RSA_WITH_RC4_128_MD5, TLS_EMPTY_RENEGOTIATION_INFO_SCSV]
Compression Methods: { 0 }
Extension elliptic_curves, curve names: {secp256r1, sect163k1, sect163r2, secp192r1, secp224r1, sect233k1, sect233r1, sect283k1, sect283r1, secp384r1, sect409k1, sect409r1, secp521r1, sect571k1, sect571r1, secp160k1, secp160r1, secp160r2, sect163r1, secp192k1, sect193r1, sect193r2, secp224k1, sect239k1, secp256k1}
Extension ec_point_formats, formats: [uncompressed]
Extension server_name, server_name: [host_name: ws.payconnexion.com]
ajp-bio-8014-exec-7, WRITE: TLSv1 Handshake, length = 191
ajp-bio-8014-exec-7, READ: TLSv1 Handshake, length = 81
*** ServerHello, TLSv1
RandomCookie: <snip>
Cipher Suite: TLS_RSA_WITH_AES_256_CBC_SHA
Compression Method: 0
Extension renegotiation_info, renegotiated_connection: <empty>
%% Initialized: [Session-5, TLS_RSA_WITH_AES_256_CBC_SHA]
** TLS_RSA_WITH_AES_256_CBC_SHA
ajp-bio-8014-exec-7, READ: TLSv1 Handshake, length = 4183
*** Certificate chain
chain [0] = [
Version: V3
Subject: CN=ws.payconnexion.com, OU=PayConnexion, O=JPMorgan Chase, L=New York, ST=New York, C=US
Signature Algorithm: SHA1withRSA, OID = 1.2.840.113549.1.1.5
Key: Sun RSA public key, 2048 bits
modulus: <snip>
public exponent: 65537
Validity: [From: Sun Apr 20 19:00:00 CDT 2014,
To: Tue Jun 02 18:59:59 CDT 2015]
Issuer: CN=VeriSign Class 3 International Server CA - G3, OU=Terms of use at https://www.verisign.com/rpa (c)10, OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US
SerialNumber: [ <snip>]
Certificate Extensions: 8
[1]: ObjectId: 1.3.6.1.5.5.7.1.1 Criticality=false
AuthorityInfoAccess [
accessMethod: ocsp
accessLocation: URIName: http://se.symcd.com
accessMethod: caIssuers
accessLocation: URIName: http://se.symcb.com/se.crt
[2]: ObjectId: 2.5.29.35 Criticality=false
AuthorityKeyIdentifier [
KeyIdentifier [
<snip>]
[3]: ObjectId: 2.5.29.19 Criticality=false
BasicConstraints:[
CA:false
PathLen: undefined
[4]: ObjectId: 2.5.29.31 Criticality=false
CRLDistributionPoints [
[DistributionPoint:
[URIName: http://se.symcb.com/se.crl]
[5]: ObjectId: 2.5.29.32 Criticality=false
CertificatePolicies [
[CertificatePolicyId: [2.16.840.1.113733.1.7.54]
[PolicyQualifierInfo: [
qualifierID: 1.3.6.1.5.5.7.2.1
qualifier: <snip>
], PolicyQualifierInfo: [
qualifierID: 1.3.6.1.5.5.7.2.2
qualifier: <snip>
[6]: ObjectId: 2.5.29.37 Criticality=false
ExtendedKeyUsages [
serverAuth
clientAuth
2.16.840.1.113730.4.1
[7]: ObjectId: 2.5.29.15 Criticality=true
KeyUsage [
DigitalSignature
Key_Encipherment
[8]: ObjectId: 2.5.29.17 Criticality=false
SubjectAlternativeName [
DNSName: ws.payconnexion.com
Algorithm: [SHA1withRSA]
Signature:
<snip>
chain [1] = [
Version: V3
Subject: CN=VeriSign Class 3 International Server CA - G3, OU=Terms of use at https://www.verisign.com/rpa (c)10, OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US
Signature Algorithm: SHA1withRSA, OID = 1.2.840.113549.1.1.5
Key: Sun RSA public key, 2048 bits
modulus: <snip>
public exponent: 65537
Validity: [From: Sun Feb 07 18:00:00 CST 2010,
To: Fri Feb 07 17:59:59 CST 2020]
Issuer: CN=VeriSign Class 3 Public Primary Certification Authority - G5, OU="(c) 2006 VeriSign, Inc. - For authorized use only", OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US
SerialNumber: [ <snip>]
Certificate Extensions: 10
[1]: ObjectId: 1.3.6.1.5.5.7.1.12 Criticality=false
Extension unknown: DER encoded OCTET string =
<snip>
[2]: ObjectId: 1.3.6.1.5.5.7.1.1 Criticality=false
AuthorityInfoAccess [
accessMethod: ocsp
accessLocation: URIName: http://ocsp.verisign.com
[3]: ObjectId: 2.5.29.35 Criticality=false
AuthorityKeyIdentifier [
KeyIdentifier [
<snip>]
[4]: ObjectId: 2.5.29.19 Criticality=true
BasicConstraints:[
CA:true
PathLen:0
[5]: ObjectId: 2.5.29.31 Criticality=false
CRLDistributionPoints [
[DistributionPoint:
[URIName: http://crl.verisign.com/pca3-g5.crl]
[6]: ObjectId: 2.5.29.32 Criticality=false
CertificatePolicies [
[CertificatePolicyId: [2.16.840.1.113733.1.7.23.3]
[PolicyQualifierInfo: [
qualifierID: 1.3.6.1.5.5.7.2.1
qualifier: <snip>
], PolicyQualifierInfo: [
qualifierID: 1.3.6.1.5.5.7.2.2
qualifier: <snip>
[7]: ObjectId: 2.5.29.37 Criticality=false
ExtendedKeyUsages [
serverAuth
clientAuth
2.16.840.1.113730.4.1
2.16.840.1.113733.1.8.1
[8]: ObjectId: 2.5.29.15 Criticality=true
KeyUsage [
Key_CertSign
Crl_Sign
[9]: ObjectId: 2.5.29.17 Criticality=false
SubjectAlternativeName [
CN=VeriSignMPKI-2-7
[10]: ObjectId: 2.5.29.14 Criticality=false
SubjectKeyIdentifier [
KeyIdentifier [
<snip>]
Algorithm: [SHA1withRSA]
Signature:
<snip>
chain [2] = [
Version: V3
Subject: CN=VeriSign Class 3 Public Primary Certification Authority - G5, OU="(c) 2006 VeriSign, Inc. - For authorized use only", OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US
Signature Algorithm: SHA1withRSA, OID = 1.2.840.113549.1.1.5
Key: Sun RSA public key, 2048 bits
modulus: <snip>
public exponent: 65537
Validity: [From: Tue Nov 07 18:00:00 CST 2006,
To: Sun Nov 07 17:59:59 CST 2021]
Issuer: OU=Class 3 Public Primary Certification Authority, O="VeriSign, Inc.", C=US
SerialNumber: [<snip>]
Certificate Extensions: 8
[1]: ObjectId: 1.3.6.1.5.5.7.1.12 Criticality=false
Extension unknown: DER encoded OCTET string =
<snip>
[2]: ObjectId: 1.3.6.1.5.5.7.1.1 Criticality=false
AuthorityInfoAccess [
accessMethod: ocsp
accessLocation: URIName: http://ocsp.verisign.com
[3]: ObjectId: 2.5.29.19 Criticality=true
BasicConstraints:[
CA:true
PathLen:2147483647
[4]: ObjectId: 2.5.29.31 Criticality=false
CRLDistributionPoints [
[DistributionPoint:
[URIName: http://crl.verisign.com/pca3.crl]
[5]: ObjectId: 2.5.29.32 Criticality=false
CertificatePolicies [
[CertificatePolicyId: [2.5.29.32.0]
[PolicyQualifierInfo: [
qualifierID: 1.3.6.1.5.5.7.2.1
qualifier: <snip>
[6]: ObjectId: 2.5.29.37 Criticality=false
ExtendedKeyUsages [
serverAuth
clientAuth
codeSigning
2.16.840.1.113730.4.1
2.16.840.1.113733.1.8.1
[7]: ObjectId: 2.5.29.15 Criticality=true
KeyUsage [
Key_CertSign
Crl_Sign
[8]: ObjectId: 2.5.29.14 Criticality=false
SubjectKeyIdentifier [
KeyIdentifier [
<snip>]
Algorithm: [SHA1withRSA]
Signature:
<snip>
Found trusted certificate:
Version: V3
Subject: CN=ws.payconnexion.com, OU=PayConnexion, O=JPMorgan Chase, L=New York, ST=New York, C=US
Signature Algorithm: SHA1withRSA, OID = 1.2.840.113549.1.1.5
Key: Sun RSA public key, 2048 bits
modulus: public exponent: 65537
Validity: [From: Sun Apr 20 19:00:00 CDT 2014,
To: Tue Jun 02 18:59:59 CDT 2015]
Issuer: CN=VeriSign Class 3 International Server CA - G3, OU=Terms of use at https://www.verisign.com/rpa (c)10, OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US
SerialNumber: [ <snip>]
Certificate Extensions: 8
[1]: ObjectId: 1.3.6.1.5.5.7.1.1 Criticality=false
AuthorityInfoAccess [
accessMethod: ocsp
accessLocation: URIName: http://se.symcd.com
accessMethod: caIssuers
accessLocation: URIName: http://se.symcb.com/se.crt
[2]: ObjectId: 2.5.29.35 Criticality=false
AuthorityKeyIdentifier [
KeyIdentifier [
<snip>]
[3]: ObjectId: 2.5.29.19 Criticality=false
BasicConstraints:[
CA:false
PathLen: undefined
[4]: ObjectId: 2.5.29.31 Criticality=false
CRLDistributionPoints [
[DistributionPoint:
[URIName: http://se.symcb.com/se.crl]
[5]: ObjectId: 2.5.29.32 Criticality=false
CertificatePolicies [
[CertificatePolicyId: [2.16.840.1.113733.1.7.54]
[PolicyQualifierInfo: [
qualifierID: 1.3.6.1.5.5.7.2.1
qualifier: <snip>
], PolicyQualifierInfo: [
qualifierID: 1.3.6.1.5.5.7.2.2
qualifier: <snip>
[6]: ObjectId: 2.5.29.37 Criticality=false
ExtendedKeyUsages [
serverAuth
clientAuth
2.16.840.1.113730.4.1
[7]: ObjectId: 2.5.29.15 Criticality=true
KeyUsage [
DigitalSignature
Key_Encipherment
[8]: ObjectId: 2.5.29.17 Criticality=false
SubjectAlternativeName [
DNSName: ws.payconnexion.com
Algorithm: [SHA1withRSA]
Signature:
<snip>
ajp-bio-8014-exec-7, READ: TLSv1 Handshake, length = 13
*** CertificateRequest
Cert Types: RSA, DSS
Cert Authorities:
<Empty>
*** ServerHelloDone
matching alias: 1
*** Certificate chain
chain [0] = [
Version: V3
Subject: CN=*.payments.austintexas.gov, O=City of Austin, L=Austin, ST=Texas, C=US
Signature Algorithm: SHA1withRSA, OID = 1.2.840.113549.1.1.5
Key: Sun RSA public key, 2048 bits
<snip>public exponent: 65537
Validity: [From: Mon Aug 11 12:39:37 CDT 2014,
To: Thu Sep 01 18:34:24 CDT 2016]
Issuer: CN=Entrust Certification Authority - L1C, OU="(c) 2009 Entrust, Inc.", OU=www.entrust.net/rpa is incorporated by reference, O="Entrust, Inc.", C=US
SerialNumber: [<snip>]
Certificate Extensions: 9
[1]: ObjectId: 1.3.6.1.5.5.7.1.1 Criticality=false
AuthorityInfoAccess [
accessMethod: ocsp
accessLocation: URIName: http://ocsp.entrust.net
accessMethod: caIssuers
accessLocation: URIName: http://aia.entrust.net/2048-l1c.cer
[2]: ObjectId: 2.5.29.35 Criticality=false
AuthorityKeyIdentifier [
KeyIdentifier [
<snip>]
[3]: ObjectId: 2.5.29.19 Criticality=false
BasicConstraints:[
CA:false
PathLen: undefined
[4]: ObjectId: 2.5.29.31 Criticality=false
CRLDistributionPoints [
[DistributionPoint:
[URIName: http://crl.entrust.net/level1c.crl]
[5]: ObjectId: 2.5.29.32 Criticality=false
CertificatePolicies [
[CertificatePolicyId: [1.2.840.113533.7.75.2]
[PolicyQualifierInfo: [
qualifierID: 1.3.6.1.5.5.7.2.1
qualifier: <snip>
[CertificatePolicyId: [2.23.140.1.2.2]
[6]: ObjectId: 2.5.29.37 Criticality=false
ExtendedKeyUsages [
serverAuth
clientAuth
[7]: ObjectId: 2.5.29.15 Criticality=false
KeyUsage [
DigitalSignature
Key_Encipherment
[8]: ObjectId: 2.5.29.17 Criticality=false
SubjectAlternativeName [
DNSName: *.payments.austintexas.gov
DNSName: payments.austintexas.gov
[9]: ObjectId: 2.5.29.14 Criticality=false
SubjectKeyIdentifier [
KeyIdentifier [
<snip>]
Algorithm: [SHA1withRSA]
Signature:
<snip>
chain [1] = [
Version: V3
Subject: CN=Entrust Certification Authority - L1C, OU="(c) 2009 Entrust, Inc.", OU=www.entrust.net/rpa is incorporated by reference, O="Entrust, Inc.", C=US
Signature Algorithm: SHA1withRSA, OID = 1.2.840.113549.1.1.5
Key: Sun RSA public key, 2048 bits
modulus: <snip>
public exponent: 65537
Validity: [From: Fri Nov 11 09:40:40 CST 2011,
To: Thu Nov 11 20:51:17 CST 2021]
Issuer: CN=Entrust.net Certification Authority (2048), OU=(c) 1999 Entrust.net Limited, OU=www.entrust.net/CPS_2048 incorp. by ref. (limits liab.), O=Entrust.net
SerialNumber: [<snip>]
Certificate Extensions: 7
[1]: ObjectId: 1.3.6.1.5.5.7.1.1 Criticality=false
AuthorityInfoAccess [
accessMethod: ocsp
accessLocation: URIName: http://ocsp.entrust.net
[2]: ObjectId: 2.5.29.35 Criticality=false
AuthorityKeyIdentifier [
KeyIdentifier [
<snip>]
[3]: ObjectId: 2.5.29.19 Criticality=true
BasicConstraints:[
CA:true
PathLen:0
[4]: ObjectId: 2.5.29.31 Criticality=false
CRLDistributionPoints [
[DistributionPoint:
[URIName: http://crl.entrust.net/2048ca.crl]
[5]: ObjectId: 2.5.29.32 Criticality=false
CertificatePolicies [
[CertificatePolicyId: [2.5.29.32.0]
[PolicyQualifierInfo: [
qualifierID: 1.3.6.1.5.5.7.2.1
qualifier: <snip>
[6]: ObjectId: 2.5.29.15 Criticality=true
KeyUsage [
Key_CertSign
Crl_Sign
[7]: ObjectId: 2.5.29.14 Criticality=false
SubjectKeyIdentifier [
KeyIdentifier [
<snip>]
Algorithm: [SHA1withRSA]
Signature:
<snip>
chain [2] = [
Version: V3
Subject: CN=Entrust.net Certification Authority (2048), OU=(c) 1999 Entrust.net Limited, OU=www.entrust.net/CPS_2048 incorp. by ref. (limits liab.), O=Entrust.net
Signature Algorithm: SHA1withRSA, OID = 1.2.840.113549.1.1.5
Key: Sun RSA public key, 2048 bits
modulus: <snip>public exponent: 65537
Validity: [From: Fri Dec 24 11:50:51 CST 1999,
To: Tue Jul 24 09:15:12 CDT 2029]
Issuer: CN=Entrust.net Certification Authority (2048), OU=(c) 1999 Entrust.net Limited, OU=www.entrust.net/CPS_2048 incorp. by ref. (limits liab.), O=Entrust.net
SerialNumber: [<snip>]
Certificate Extensions: 3
[1]: ObjectId: 2.5.29.19 Criticality=true
BasicConstraints:[
CA:true
PathLen:2147483647
[2]: ObjectId: 2.5.29.15 Criticality=true
KeyUsage [
Key_CertSign
Crl_Sign
[3]: ObjectId: 2.5.29.14 Criticality=false
SubjectKeyIdentifier [
KeyIdentifier [
<snip>]
Algorithm: [SHA1withRSA]
Signature:
<snip>
*** ClientKeyExchange, RSA PreMasterSecret, TLSv1
ajp-bio-8014-exec-7, WRITE: TLSv1 Handshake, length = 3970
SESSION KEYGEN:
PreMaster Secret:
<snip>
CONNECTION KEYGEN:
Client Nonce:
<snip>
Server Nonce:
<snip>
Master Secret:
<snip>
Client MAC write Secret:
<snip>
Server MAC write Secret:
<snip>
Client write key:
<snip>
Server write key:
<snip>
Client write IV:
<snip>
Server write IV:
<snip>
*** CertificateVerify
ajp-bio-8014-exec-7, WRITE: TLSv1 Handshake, length = 262
ajp-bio-8014-exec-7, WRITE: TLSv1 Change Cipher Spec, length = 1
*** Finished
verify_data: { 51, 254, 40, 56, 247, 218, 130, 183, 112, 239, 95, 4 }
ajp-bio-8014-exec-7, WRITE: TLSv1 Handshake, length = 48
ajp-bio-8014-exec-7, READ: TLSv1 Change Cipher Spec, length = 1
ajp-bio-8014-exec-7, READ: TLSv1 Handshake, length = 48
*** Finished
verify_data: { 89, 182, 137, 178, 177, 31, 27, 115, 151, 90, 169, 49 }
%% Cached client session: [Session-5, TLS_RSA_WITH_AES_256_CBC_SHA]
ajp-bio-8014-exec-7, setSoTimeout(60000) called
ajp-bio-8014-exec-7, WRITE: TLSv1 Application Data, length = 1520
ajp-bio-8014-exec-7, READ: TLSv1 Application Data, length = 128
Jan 23, 2015 13:15:38 PM Information [ajp-bio-8014-exec-7] - HTTP request completed {Status Code=500 ,Time taken=1302 ms}
ajp-bio-8014-exec-7, READ: TLSv1 Application Data, length = 256
ajp-bio-8014-exec-7, READ: TLSv1 Alert, length = 32
ajp-bio-8014-exec-7, RECV TLSv1 ALERT: warning, close_notify
ajp-bio-8014-exec-7, called closeInternal(false)
ajp-bio-8014-exec-7, SEND TLSv1 ALERT: warning, description = close_notify
ajp-bio-8014-exec-7, WRITE: TLSv1 Alert, length = 32
ajp-bio-8014-exec-7, called closeSocket(selfInitiated)
ajp-bio-8014-exec-7, called close()
ajp-bio-8014-exec-7, called closeInternal(true)Ok, apparently Chase person who said we were not sending the certs and achieving mutual auth
was incorrect. The https calls were connecting, and mutual auth was taking place. The 500
error was about a soap envelope being delivered, and NOT SSL as I directed to. Everything
is working fine now.
Thanks,
Bob -
Registering SPA500 series IP phone with CME 8.6
Hello friends. I'm newbie with CME configuration, but now I'm asked to register SPA504G phones onto a CME 8.6 installed on a Cisco 2911 router using SIP protocol. I'm testing with a SPA 502G phone with software version 7.4.7. Within "voice register global" configuration I can't find "load" command for thisphoone model. About phone files, I only found "spa50x-30x-7-4-8a.bin" file for this phone and loaded into flash: unit.
How can I make SPA 500G phone be registered with this CME? I would appreciate somebody can help me with a guide to achieve this.
Thanks in advance for your help.
Best regards
JoeI have the same problem.
Can anyone help?
Thank you. -
Cisco ip phone 9971 registration failed with CME 8.6 on WAN
Dear Sir
Subject: Cisco ip
phone 9971 registration failed
with CME 8.6 on WAN
I have a WAN simulation with one Cisco2811 router one Cisco1841 router (connected with fast Ethernet interface) plus one layer 2 switch.
I upgraded the 2811 IOS to 15.4M and installed CME8.6, when we tried to add 9971 sip phone If the traffic goes throw LAN (Same subnet- directly from switch to 2811) everything is fine and the SIP phone (9971) added with no problem but when I change the subnet and traffic goes throw WAN
( from 1841 routed to 2811 with default route) my phone didn't register.
It will be great if anybody could help!!
If you can solve my problem, I will be happy to compensate.Try binding SIP to an interface on which Phone can reach (Use "voice service voip" "sip" and then bind)
Udit
Maybe you are looking for
-
Aperture crashes when e-mailing more than one photo at a time.
I am unable to send more than one image at a time after updating to ML. I have to force quit the mail appl. This is a know issue and I am unable to find out if a fix is available or pending.
-
Im getting error -37 when trying to back up my iPhone data ready for IOS 5 install. Any work arounds yet for this?
-
HT1338 i can not connect my beats headphone with my mackbook pro? any advise plase?
any advise? how can i connect my beats headphone ith my mackbook pro?
-
BUG 5642176 in 10.1.3.2 ? "AWT-EventQueue-0" java.lang.NullPointerException
Hi, JDeveloper version: JDev 10.1.3.2 Technology: ADF BC / ADF Faces I have following exception when I press COMMIT on creation form: Exception in thread "AWT-EventQueue-0" java.lang.NullPointerException 07/03/28 15:18:58 at oracle.jbo.uicli.bin
-
10g Release 2 Patch Set 1 for windows 2003 32bit
Hi. I am having hard time finding the *10.2.0.3 Patch Set 1* for 10g R2 for Win2003 32 bit on metalink. I found Patch set 2 which is 5337014all right but no Patch Set 1. Does anyone know the Metalink patch number for Patch Set 1 so I could do a quick