Duplicate PO to Vendor through XI

Hi,
We have SRM 5.0 system which is connected to third party supplier hub through XI. I have an issue, when ever I order a new PO; the PO goes to 2 times to vendor as a purchase order and change order. When I look into SRM PO version, the PO is not a changed.
Please any one suggests me how this would possible and what wrong in my setup.
Regards,
Senn

hi
check this sap note we will get details steps
SAP Note 191470 - Purchase order as an e-mail
this is from sap note
When using external mail, the following basic settings are required:
1. You must maintain an e-mail address in the address in the vendor
master.
2. The same applies to your own user master. You also have to specify an
e-mail address there in order to identify the sender.
o Note that it is not possible to change the e-mail address of the
vendor via the SAP purchase order transaction (ME21N, ME22N, and so
on).
o You can only make a permanent change using the vendor master
transactions XK02 or MK02.
o You can use a temporary email address in Transaction ME21N.
3. For the output type for default values, a communication strategy needs
to be maintained in the Customizing that supports the e-mail. You can
find the definition of the communication strategy in the Customizing
via the following path: (SPRO -> IMG -> SAP Web Application Server ->
Basic Services -> Message Control -> Define Communication Strategy).
As a default, communication strategy CS01 is delivered. This already
contains the necessary entry for the external communication. Bear in
mind that without a suitable communication strategy it is not possible
to communicate with a partner via Medium 5 (external sending).
4. Use the standard SAP environment (program 'SAPFM06P', FORM routine
'ENTRY_NEU' and form 'MEDRUCK') as the processing routines.
5. In the condition records for the output type (for example, Transaction
MN04), use medium '5' (External send).
6. You can use Transaction SCOT to trigger the output manually. The
prerequisite for a correct sending is that the node is set correctly.
This is not described here, but it must have already been carried out.
7. To be able to display, for example, the e-mail in Outlook, enter PDF
Regards
Kailas Ugale

Similar Messages

Advance payment to vendor through FBCJ

Hi,
While we are paying salary/imprest/other/travel advance to Employee vendor through t/code u2013 FBCJ which has no Spl GL. This payment gets debited automatically in Employees account ( 350110). Whereas salary advance should go to GL code 320080, imprest/other advances should go to GL code 320140 and Tour advance should go to GL code 320100.
Kinldy tell me if we want to pay vendor advance through FBCJ in cash where Special GL indicator option is not given in SAP, how we can pass entry through this FBCJ ?. Because in F-48 there is a option for Bank A/C GL.
With Regards,
Samrat

Hi,
Thnks for your reply. You have opened Clearing Account in your company. Because in our compnay they are doing this type of scenario thorugh Contra Account. Pass the entry through FB60 then F-43. Here nullifies conta account and then pass through FBCJ.
Kindly tell me while you are using Clearing A/c Dr. to Cash A/c Cr, which t code you are using. Is it F-02 and doc type SA. And while you use FB01 for Vendor A/C Dr. To Clearing A/C Cr. which doc type you use ? And Dr and Cr posting keys are 25 and 50.
And finally while you pass Vendor A/c Dr. To Cash a/c, you are using FBCJ in payment tab. Am I right ? Kindly tell me above queries..
With Regards,
Samrat

How can I find duplicate photos without going through all 5000 one at a time?

How can I find duplicate photos withough going through all 5000 one by one? I have numerous duplications and used to be able to click on Edit and Find Duplicates and could clean up all the duplicates easily. Now that option is gone. I still have lots to delete.

I do backup everything using Carbonite.Please don't tell me it is bad, too :-) Also, especially with photo files, I do have other backups of those I am concerned about. Probably not the best in the world, but a log better than many people who I know about.
Again, I really have not seen any problems with MacKeeper. I imagine that if people do not read and follow instructions, they could have problems. For example, it is possible to scan all your files and see them in order of size. If you start deleting things, without knowing what you're deleting, you could cause trouble. Even when the computer scans for so-called junk files, you can look at them and decide for yourself if they are truly junk. I've never seen any that were not.
So, I will look at the complaints anyway to see them. I am open to change, although I hope I do not need to drop Mackeeper as it does things like keeping tracking of applications updates that I need. Please note that I definitely am not a MacKeeper employee or anything close. Just using it and happy with the the results.
I did download the recommend file for finding photo dupes and ran it. There were very few duplicates, in any case, As I said before, the MacKeeper dupe finder was very slow when I ran it over ALL my files. That was a year ago and it did find many non-text dupes.

Payment Advice Print sent to Vendor Through E-Mail

Hi All,
Thanks in advance.
Is there any possibility to send my Payment Advice Print to my vendor through E-Mail in the standard transaction FBZ5.
Regards:
Sridhar.J

Hi,
Are you sending the Payment Advice print in the form of smartform?
If yes, check those FM SO_NEW_DOCUMENT_ATT_SEND_API1.
This is to attach the document to the mail.
SO_NEW_DOCUMENT_SEND_API1.
This is to send the mail from program.
Hope it helps.
Regards,
Raj

Activation of duplicate check for vendor or customer account by matchcode

Hi,
Could you please me know how to do the activation of duplicate check for vendor as well as customer account by matchcode.
Many Thanks,
Panneer

solved

Advance payment make to vendor through pretty cash

Dear Experts...
In my company maintaining only ONE petty cash account. User required to make the Advance Payment to Vendor through petty cash.
i removed the post automatically check box in petty cash a/c and posted the entry f-48.
29A    Vendor a/c           xxxx
50      Petty cash a/c      xxxx-
But the closing balance of petty cash a/c is not changed
Please give the suggtion how to make the advance payment to vendor through petty cash?
Thanks in Advance
Regards,
Venkat

Dear Venkat,
a. You cannot post vendor advances using Cash Journal (FBCJ)
b. You need to create a Cash Clearing GL to use the further process.
1. In FBCJ at the time of vendor advance you need to select Cash Clearing A/c. System will post below accounting entries.
Cash Clearing Account - Dr.
    To Cash Main A/c - Cr.
2. You need to transfer this entry in Vendor A/c (F-48)
Vendor A/c (Spl GL Indicator) - Dr.
    To Cash Clearing A/c - Cr.
3. Clearing of Cash Clearing Account (F-03).
Now you can find all the advances made for vendors in Vendor Reports.
Hope this helps?
Thank you,
Bhargava Sriramakrishna

Partial payment to vendor through APP

Hi all,
Can any one tell me how to configure if I want do partial payment to one or two vendors through APP. I mean I need to pay only 50% of invoice amount to my vendor through APP how is it to be configured.
Please give me full configuration step
Thanking you

Hii
In APP its not possible to make the partial payment... u need to do it manually through F-53 here u can enter the amount u want to make payment and click on process open item
here u can make the partial payment
hope it helps u
reward points
sejal

Not Able to Create Vendor Through PRAA

Hi All,
I am not able to convert employee into vendor through PRAA program. It seems the background program is not running. So it would be great if any one can tell me exactly step by step how to run this program and how to check its result. Also pls share whats the best practise of running this program in production.
Thank you,
Rakesh

Hello Sigi,
Thank you for a prompt response.
The vendors are already created. Therefore, i am executing PRAA in update mode instead of Initial setup mode. The process that i follow is as follows.
First RPRAPA00 creates only the workfile.(as a background job) When this is finished, RFBIKR00 (also as background job) takes this file and creates the batch input session out of it and this is finished, the last report comes to process the created session. The same user starts both jobs.
When i explicitly update a vendor through PRAA it is updated successfully. Changes are reflected in XK02 / XK03. But when done via a batch job changes are not reflected despite no errors in job and sessions.
Please your inputs on this.
Regards,
Deepali Bhandari

Approved payment proposal send to vendors through email

Hi All,
We want to send the payment advice to vendors via e-mail as soon as the payment proposal is approved.
We have the workflow here, once the payment proposal has been created, it will go for the approval.
the approver will approve the proposal if it is okay.
so, once this proposal has been approved, the payment advice should send to corresponding vendors through email;
Regards,
Shwetha

Hello,
You can control whether a payment advice note is to be sent by e-mail via BTE interface 00002040.
The Function Module Sample Process is SAMPLE_PROCESS_00002040 which you
can find by using transaction BERP. You can use this Function Module as
a reference for the BTE and find instructions for setting up the
interface.
Note 407827 and1033893 provide good hint on how to achieve your business needs. Furthermore, I'd suggest you to send payment advices after payment run and not after proposal run.
REgards,
REnan

Down payments to different vendors through app (f110)

hi frineds how can i make down payments to different vendors through APP in (f110), where should i configure this settings ? pls help me with t.codes and paths..

SETTINGS:
Usually "F" is used for DPR (DOWN PAYMENT REQUEST) and "A" is used for DP (DOWN PAYMENT).
"F" has as target indicator "A" by OBYR transaction.
POSTINGS:
By F-47 You post a DPR.
During the DPR posting, you have to insert the Target indicator; usually A and the DPR will report F as special indicator. ( Bcoz DPR(F) will target DP, that is A)
Into FBZP --> All company codes --> Sp. G/L transactions to be paid --> if you insert F, the System will take the DPR previously posted during the F110.
But if you posted some DPs, these DPs will not take in consideration by F110.
ALL THE BEST

Payment to Vendor through credit cards?

Can anybody tell me is there any possibility to make payment to vendor through Credit Card.
If so, Plz tell wat are configuration steps in SAP FI.

Hi All,
Kindly suggest on this requirement.
Thanks & Regards
Deepak Garg

PO send to vendor through e-mail

Hi All,
while sending the PO to vendor through e mail, some POs sent to vendor. but some are not. I have seen the in the vendor master address screen the e mail is correct.
And i have seen the messages in PO , the medium 5 (external send) is also maintained for the all POs which is sent and not sent.
So please guide in this in which part the error will be possible
Thanks in advance
with regards
Allen

Follow this
Basically there are two mail types: Internet mail (external mail) and SAPOffice mail.
Mail is sent via the output determination in both cases.
If you use the external mail, the message for the purchasing document is converted into a corresponding text file which is sent to the vendor via the Internet.
SAPOffice mail is sent only within the R/3 System and has mainly the function of providing information.
In particular, it is not possible to attach a message (form) for a purchasing document to a SAPOffice mail.
When using external mail, the following basic settings are required:
1. You must maintain an e-mail address in the address in the vendor master.
2. The same applies to your own user master. You also have to specify an e-mail address there in order to identify the sender.
o Note that it is not possible to change the e-mail address of the vendor
o You can use a temporary email address in Transaction ME21N.
3. For the output type for default values, a communication strategy needs to be maintained in the Customizing that supports the e-mail.
You can find the definition of the communication strategy in the Customizing via the following path: (SPRO -> IMG -> SAP Web Application Server -> Basic Services -> Message Control -> Define
Communication Strategy). As a default, communication strategy CS01 is delivered. This already contains the necessary entry for the external communication. Bear in mind that without a suitable communication strategy it is not possible to communicate with a partner via Medium 5 (external sending).
4. Use the standard SAP environment (program 'SAPFM06P', FORM routine 'ENTRY_NEU' and form 'MEDRUCK') as the processing routines.
5. In the condition records for the output type (for example,Transaction MN04), use medium '5' (External send).
6. You can use Transaction SCOT to trigger the output manually. The prerequisite for a correct sending is that the node is set correctly. This is not described here, but it must have already been
carried out.
7. To be able to display, for example, the e-mail in Outlook, enter PDF as the format in the node.
To use the SAPOffice mail, the following basic settings are required:
1. For the output type for default values, a communication strategy needs to be maintained in the Customizing that supports the e-mail.
You can branch to the maintenance of the communication strategy via the input help.
2. Use the SAP standard environment (program "RSNASTSO" and FORM routine "SAPOFFICE_AUFRUF") as the processing routines.
3. In the condition records for the output type (for example,Transaction MN04), use medium '7' (SAPOffice) and also partner role 'MP' (mail partner).
Additional settings:
Problem:
How can you both change the mail title and text for the sending of a mail message and maintain a replacement parameter, for example a document number.
Solution:
1. The replacement routine is maintained in the Customizing for the output type in the detail screen on the 'General data' tab under 'Replacement of text symbols' (for Release < 4.6B, this can be found on the 'Mail' tab page).
Program: SAPMM06E
FORM routine: TEXT_SYMBOL_REPLACE
2. Maintain mail title and text.
o If you want to send a purchase order within an R/3 system using the SAP office, you can maintain both the mail title ('Re:') and also a mail text in the Customizing for the output type To do this, select the directory mail title and text for the corresponding message type.
o If you want to send a purchase order as (external) mail, for example, to a vendor, you have to maintain the mail title in the condition record for the output type (for example in Transaction MN05) on the 'Communication method' tab page. Enter the mail title in the 'Text for cover page' field. You cannot maintain an additional mail text.
o Note that the values from the mail title are used to create the description for the attachment.
3. The replacement parameters must be enclosed by &. Example: You want to enter the title 'PO number '. For this you have to enter the following in the Document Title field (Message Customizing ->
sub-option: Mail title and texts) 'PO number &EKKO-EBELN&'

How can i configure advance payment to vendors through cash jounal

how can i configure advance payment to vendors through cash jounal pls its urgent for me kindly help me out

HI,
I think u need not configure anyting new for this, you can use the existing Business Tran. Type K and rename it as Vendor Advance for separate identity. You can do the normal FBCJ posting.
But doing this you will not have separate identity for the Advances paid.
Thanks
VK

Unloading point not transmited to vendor through EDI in Scheduleing Agreeme

Hi ,
Unloaloading point details are not transmited to vendor through EDI in scheduleing agreement . What would be the possible reason ? . Auto unloading point detials are their for perticular material in message details .
RB

Hi ,
Currently we are using Message Type - GSVERF , Basic type - GSVERF03 , Processing code- GSVE , FM-IDOC_INPUT_GSVERF_START and assigned this FM to Object Type- BUS2094)..which is giving above error. I just found that process code GSVE is for Outbound message
Can any one suggest / confirm what should be exact Message Type , Basis Type, Process code and Funct. Module requiered for processing EDI inbound message in MM - Logistics Inv Varification ?
Thanks
NAP

Sending Attachemnt along with PO to Vendor through Email

Hi
Currently we are able to send only the PO in PDF format to the Vendor through Email, i also want to send the attachments that the PO has to the Vendor. Please if you can tell me the settings.
Thanks
Ankit

This is not possible without development .Refer notes 786847,191470
Details for the print program:
In the customer namespace, a central class is first created that takes care of actually shipping the e-mail with texts and attachments.
Furthermore, application-specific classes are created in the customer namespace (if required). At present, these are available for purchasing documents (purchase order, request for quotation, and so on) and sales documents (sales order or order acknowledgment, quotations, and so on). Further applications can be considered after consultation.
You can continue to use the print program that you have used up until now. Only minor adjustments are required in order to use the corresponding class in the case of external sending (Medium 5).
A new dummy message type is created in Customizing. You can use transaction MN04 to create an additional condition record for this message type for the relevant vendor. However, medium 7 is used here, which allows you to maintain communication settings. The communication settings include an individual e-mail text and an individual recipient list (type INT) for each condition record.
The dummy message type is not used in the purchase order, rather it is used only as a workaround to enable you to maintain recipients and texts in the standard system with ease.
A new Z table is created that contains each application (KAPPL) and purchasing organization parameter. In this way, for example, the text prefixes can be filled for the attachments in the e-mail or you can specify which additional attachments are to be copied to the e-mail.
Processing the message:
If the message type of the purchasing document is processed, the recipients and the text are read from the dummy message type and are added to the e-mail. Placeholders (for example, &EKKO-EBELN&) may be triggered.
If NO condition record is found for the dummy message type, the system uses the standard text and the recipient address from the master record. In this way, you automatically continue to have the standard behavior (with an additional e-mail text) for partners that you do not want to receive special treatment.
The purchasing document is attached as a PDF file.
Further attachments are added as described in the settings (see above). There is a distinction made between attachments from the generic object services (GOS) and attachments from the Document Management System. The Document Management System attachments can be assigned, for example, to the object EKPO (purchase order item) or MARA (material master).
If no errors have occurred up to now, the completed e-mail is sent and delivered to the sending system. Otherwise, errors can be transferred to the message collector as normal and can be checked there.

Duplicate PO to Vendor through XI

Similar Messages

Maybe you are looking for