Duplicate records error?

hello all
while extracting master data am getting duplicate records error?
how do i rectify this?
in infopackage screen in processing tab,will i get the option " ignore double data records",?
when will this option will be enable?
regards

Hello
This option will be available only for Master Data and not for Transactional Data. You could control the Duplicate Records for Transactional Data in ODS, there is an option in the ODS Settings.
***F1 Help
Flag: Handling of duplicate data records
From BW 3.0 you can determine for DataSources for master data attributes and texts whether the extractor transfers more than one data record in a request for a value belonging to time-independent master data.
Independently of the extractor settings (the extractor potentially delivers duplicate data records) you can use this indicator to tell the BW whether or not you want it to handle any duplicate records.
This is useful if the setting telling the extractor how to handle duplicate records is not active, but the system is told from another party that duplicate records are being transferred (for example, when data is loaded from flat files).
Sankar

Similar Messages

BI 7.0 - Duplicate Record Error while loading master data

I am working on BI 7.0 and I am trying to load master data to an info object.
I created an Infopackage and loaded into PSA.
I created transformation and DTP and I get an error after I execute the DTP about duplicate records.
I have read all previous threads about duplicate record error while loading master data and most of the them suggested to check 'Ignore duplicate records' option in the infopackage. But in 7.0, I can only load to PSA with infopackage and it doesn't have any option for me to ignore duplicate records.
My data is getting loaded to PSA fine and I get this error while loading to info object using DTP.
I would appreciate your help to resolve this issue.
Regards,
Ram.

Hi,
Refer:
http://help.sap.com/saphelp_nw2004s/helpdata/en/45/2a8430131e03c3e10000000a1553f6/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/d0/538f3b294a7f2de10000000a11402f/frameset.htm
With rgds,
Anil Kumar Sharma .P

Duplicate record error

Hi,
I am using a ODS as source to update the master data infoobject with flexible update. The issue is in spit of using option ONLY PSA ( Update subsequently in data target ) in the infopackage with error handling enabled, I am getting Duplicate record error. This happens only when I am updating through process chain. If I run it manually, the error doesn't comes. Plz let me know the reason.
Thanks

Hi Maneesh,
As we r loading from ODS to info object we dont get the option "don't update duplicate records if exists"
first did u checked any duplicate records found in PSA?? if so delete them from PSA.
or one option is enable error handling in infopackage.
or
check any incosistencies for infoobject in RSRV and if found repair it and load again. check the inconsistencies for P,X,Y tables and for the complete object also.
*assign points if helpfull*
KS

Duplicate Records error when processing transaction file....BPC 7.0

Hi All,
I have a situation. I am using BPC NW 7.0 and I have updated my dimension files. When I try to validate my transaction file every single record is validated successfully. But when I try to import the flat file into my application, I am getting a lot of dupplication records error and these are my questions.
1. Will we get duplicate records in transaction files?
2. Even if there are duplication, since it is a cube it should summarize not display that as a error and reject records?
3. Is there something I can do to accept duplicates (I have checked the Replace option in the data package, to overwrite the simillar records, but it is only for account, category and entity only.
5. In mycase I see identical values in all my dimension and the $value is the only difference. Why is it not summing up.
Your quickest reply is much appreciated.
Thanks,
Alex.

Hi,
I have the same problem.
In my case the file that I want to upload has different row that differ for the nature column. In the conversion file I map different nature to one internal nature.
ES: cost1 --> cost
cost2 --> cost
cost3 --> cost
In my desire was that in BPC the nature cost assume the result cost = cost1 + cost2 + cost3.
The result is that only the first record is uploaded and all other recorda are rejected as duplicate.
Any suggestion?

Error in Duplicate record validation in EntityObject using unique key contraint

I have implemented Unique key validation in Entity Object by creating Alternate key in Entity object.
So the problem is that whenever the duplicate record is found,the duplicate record error is shown, but the page becomes blank, and no error is shown in the log.
I wanted to know what may be the possible cause of it.
I am using Jdev 11.1.2.4.

After duplication, clear the PK item, then populate from the sequence in a PRE-INSERT block-level trigger.
Francois

Start routine to filter the duplicate records

Dear Experts
I have two questions regarding the start routine.
1) I have a characteristic InfoObject with transactional InfoSource. Often the 'duplicate records' error happens during the data loading. I'm trying to put a start routine in the update rule to filter out the duplicate records.
After searching the SDN forum and SAPHelp, I use the code as:
DELETE ADJACENT DUPLICATES FROM DATA_PACKAGE COMPARING KEY1 KEY2 KEY3.
In my case, the InfoObject has 3 keys: SOURSYSTEM, /BIC/InfoObjectname, OBJVERS. My code is:
DELETE ADJACENT DUPLICATES FROM DATA_PACKAGE COMPARING SOURSYSTEM /BIC/InfoObjectname OBJVERS.
When checking the code I got message: 'E:No component exists with the name "OBJVERS".' So I only included the first 2 keys. But the routine does not work. The duplicate error is still happening. What is missing in this start routine?
2) Generally, for a start routine, do I really need to include the data declaration, ITAB or WA, SELECT statement etc.?
Do I have to use the statement below or just simply one line?
LOOP AT DATA_PACKAGE.
IF DATA_PACKAGE.....
ENDIF.
ENDLOOP.
Thanks for your help in advance, Jessica

Hello Jessica,
if it won't be possible for you to get unique data from the very beginning, there is still another way to manage this problem in a start routine.
Sort ... and delete adjacent ... must remain. Further on build up an internal table of type data_package, but defined with STATICS instead of DATA. This i-tab stays alive for all data-packages of one load. Fill it with the data of the transferred data-packages, and delete from every new data-package all records which already are in the statics i-tab. Alternatively you could do the same with a Z-(or Y-)database-table instead of the statics i-tab.
It will probably cost some performance, but better slow than wrong data.
Regards,
Ernst

No 'Handle Duplicate records' in update tab

Hi,
I've a DTP from ODS/DSO to ODS/DSO and I got a Duplicate record error, which I find rather strange for standard ODS/DSO. I read in the help and within these forums that it can be fixed with the 'Handle Duplicate records' checkbox in the update tab. Trouble is that there isn't such a checkbox in our BI7 SP15 installation.
Any suggestion on the reason for that and how to fix this and more important on how to get rid of the duplicate record error (and the reason why it's occurring)?
Many thanks in advance
Eddy

Hi Eddy,
I am confused -:)
Have u tried by checking or by unchecking..
My suggestion is to try by selecting the setting unique data records...
Cheers
Siva

36 duplicate record found. -- error while loading master data

Hello BW Experts,
Error while loading master data
( green light )Update PSA ( 50000 Records posted ) No errors
( green light )Transfer rules ( 50000 ³ 50000 Records ): No errors
( green light )Update rules ( 50000 ³ 50000 Records ): No errors
( green light ) Update ( 0 new / 50000 changed ): No errors
( red light )Processing end: errors occurred
     Processing 2 finished
Þ     36 duplicate record found. 15718 recordings used in table /BIC/PZMATNUM
Þ     36 duplicate record found. 15718 recordings used in table /BIC/XZMATNUM
This error repeats with all the data-packets.
what could be the reason of the error. how to correct the error.
Any suggestions appreciated.
Thanks,
BWer

BWer,
We have exactly the same issue when loading the infoobject 0PM_ORDER, the datasource is 0PM_ORDER_ATTR.
The workaround we have been using is 'Manual push' from the details tab of the monitor. Weirdly we don't have this issue in our test and dev systems, even in Production, this doesn't occur somedays. We have all the necessary settings enabled in the infopackage.
Did you figure out a solution for your issue, if so please let me know and likewise I will.
-Venkat

Getting Duplicate data Records error while loading the Master data.

Hi All,
We are getting Duplicate data Records error while loading the Profit centre Master data. Master data contains time dependent attributes.
the load is direct update. So i made it red and tried to reloaded from PSA even though it is throwing same error.
I checked in PSA. Showing red which records have same Profit centre.
Could any one give us any suggestions to resolve the issues please.
Thanks & Regards,
Raju

Hi Raju,
I assume there are no routines written in the update rules and also you ae directly loading the data from R/3 ( not from any ODS). If that is the case then it could be that, the data maintained in R/3 has overlapping time intervals (since time dependency of attributes is involved). Check your PSA if the same profit center has time intervals which over lap. In that case, you need to get this fixed in R/3. If there are no overlapping time intervals, you can simply increase the error tolerance limit in your info-package and repeat the load.
Hope this helps you.
Thanks & Regards,
Nithin Reddy.

How to avoid 'duplicate data record' error message when loading master data

Dear Experts
We have a custom extractor on table CSKS called ZCOSTCENTER_ATTR. The settings of this datasource are the same as the settings of 0COSTCENTER_ATTR. The problem is that when loading to BW it seems that validity (DATEFROM and DATETO) is not taken into account. If there is a cost center with several entries having different validity, I get this duplicate data record error. There is no error when loading 0COSTCENTER_ATTR.
Enhancing 0COSTCENTER_ATTR to have one datasource instead of two is not an option.
I know that you can set ignore duplicates in the infopackage, but that is not a nice solution. 0COSTCENTER_ATTR can run without this!
Is there a trick you know to tell the system that the date fields are also part of the key??
Thank you for your help
Peter

Alessandro - ZCOSTCENTER_ATTR is loading 0COSTCENTER, just like 0COSTCENTER_ATTR.
Siggi - I don't have the error message described in the note.
"There are duplicates of the data record 2 & with the key 'NO010000122077 &' for characteristic 0COSTCENTER &."
In PSA the records are marked red with the same message (MSG no 191).
As you see the key does not contain the date when the record is valid. How do I add it? How is it working for 0COSTCENTER_ATTR with the same records? Is it done on the R/3 or on the BW side?
Thanks
Peter

Master data failed with error `too many duplicate records'

Dear all
below is error message
            Data records for package 1 selected in PSA -
            error                                                 4 in the update
LOng text is giving as below
Error              4 in the update
Message no. RSAR119
Diagnosis
The update delivered the error code                                                   4.
Procedure
You can find further information on this error in the error message of the update.
WOrking on BI - 7.0
any solutions
Thanks
satish .a

Hi,
Go through these threads, they have same issue:
Master data load: Duplicate Records
Re: Master data info object - duplicate records
Re: duplicate records in master data info object
Regards
Raj Rai

Calendar and Adressbook error: Duplicate records found for GUID

Hi all,
i have a Mountaion Lion Server running on a mac mini and everything was working well.
This morning one user of mine is unable to connect to his calendar and adressbook.... i found this error in the log files:
2013-06-30 15:19:50+0200 [-] [caldav-1] [-] [twistedcaldav.directory.appleopendirectory.OpenDirectoryService#error] Duplicate records found for GUID ****USER_GUID****:
2013-06-30 15:19:50+0200 [-] [caldav-1] [-] [twistedcaldav.directory.appleopendirectory.OpenDirectoryService#error] Duplicate: ***USER_Shortname***
Apperetnly there is a duplicate match in the database. how can i fix this issue?
In Server App this user is only listed once.
Mail and other services for this user are working correctly.
Thanks for any advice!

Hi Samuel,
You may try:
select code,count(code)
from [dbo\].[@XTSD_XA_CMD\]
group by code having count(code) > 1
What is the result?
Thanks,
Gordon

Error RSMPTEXTS~:Duplicate record dur durin EHP5 in phase SHADOW_IMPORT_INC

Hi expert,
i find this error during an EHP5 upgrade in phase shadow_import_inc:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
SHADOW IMPORT ERRORS and RETURN CODE in SAPK-701DOINSAPBASIS.ERD
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2EETW000 Table RSMPTEXTS~: Duplicate record during array insert occured.
2EETW000 Table RSMPTEXTS~: Duplicate record during array insert occured.
1 ETP111 exit code           : "8"
here also the last part of log SAPK-701DOINSAPBASIS.ERD
4 ETW000 Totally 4 tabentries imported.
4 ETW000 953984 bytes modified in database.
4 ETW000 [     dev trc,00000] Thu Aug 11 16:58:45 2011                                             7954092 8.712985
4 ETW000 [     dev trc,00000] Disconnecting from ALL connections:                                       28 8.713013
4 ETW000 [     dev trc,00000] Disconnecting from connection 0 ...                                       38 8.713051
4 ETW000 [     dev trc,00000] Closing user session (con=0, svc=0000000005C317C8, usr=0000000005C409A0)
4 ETW000                                                                                8382 8.721433
4 ETW000 [     dev trc,00000] Detaching from DB Server (con=0,svchp=0000000005C317C8,srvhp=0000000005C32048)
4 ETW000                                                                                7275 8.728708
4 ETW000 [     dev trc,00000] Now I'm disconnected from ORACLE                                        8648 8.737356
4 ETW000 [     dev trc,00000] Disconnected from connection 0                                            84 8.737440
4 ETW000 [     dev trc,00000] statistics db_con_commit (com_total=13, com_tx=13)                        18 8.737458
4 ETW000 [     dev trc,00000] statistics db_con_rollback (roll_total=0, roll_tx=0)                      14 8.737472
4 ETW000 Disconnected from database.
4 ETW000 End of Transport (0008).
4 ETW000 date&time: 11.08.2011 - 16:58:45
4 ETW000 1 warning occured.
4 ETW000 1 error occured.
1 ETP187 R3TRANS SHADOW IMPORT
1 ETP110 end date and time   : "20110811165845"
1 ETP111 exit code           : "8"
1 ETP199 ######################################
4 EPU202XEND OF SECTION BEING ANALYZED IN PHASE SHADOW_IMPORT_INC
and i've already try to use the last version of R3trans.
can you help me????
thanks a lot
Franci

Hello Fransesca,
I am also facing same error while upgrading ehp5 upgradation please if you know tell me steps to solve it.
Thanks,
Venkat

Customizing error message of duplicate record

HI All,
I need to customize an error message of duplicate record inserting in a field of unique-constraint. I want to show the message in an alert. How can i do this?
Arif

Hi,
you can use ON-MESSAGE trigger and check the error code then display your custom error message
Regards,

Intellisync error "Duplicate records found"

I am trying to sync my BB 8300 with Outlook 2007. I am using Blackberry Desk Manager 4.2.2.14.
I was able to sync before but now it get this error "Duplicate records found in the device" and it won't sync.
Any ideas to fix this problem?
I tried to un-install and re-install DM.
I also tried to delete Intellisync folder
Thanks!

JJKD wrote:
I am trying to sync my BB 8300 with Outlook 2007. I am using Blackberry Desk Manager 4.2.2.14.
I was able to sync before but now it get this error "Duplicate records found in the device" and it won't sync.
Any ideas to fix this problem?
I tried to un-install and re-install DM.
I also tried to delete Intellisync folder
Thanks!
Hi JJKD;
What is your email application?
Backup your device.
Review the BB KB Here...
There are a couple of approaches to this. If your not needing to complete a two way sync, you can clear the calendar on the BB Handheld by going to BACKUP / ADVANCED and clearing the calendar on right side of the Advanced GUI. Then just try a regular sync.
This can also work by clearing
If you do need to complete a two way sync you can BACKUP the device and clear the Calendar (edit), then RESTORE just the the calendar in BACKUP / ADVANCED by menu'ing the backup you created and complete a restore of the calendar. By backing up and then clearing and then restoring, this will clear any issues with the calendar DB and reindex the data. Then try a regular sync and see if the symptom is taken care of.
Good luck and let us know how your doing...
Message Edited by hmeister on 10-10-2008 09:48 PM
+++++++++++++++++++++++++++++++++++++++++++++++++
If successful in helping you, please give me kudos in my post.
Please mark the post that solved it for you!
Thank you!
Best Regards
hmeister

Duplicate records error?

Similar Messages

Maybe you are looking for