Duplicating batches during inventory

Hi all.
I'm having a big problem here to make continuous inventory using WM.
I'm folloinw these steps:
1- Li01n (or LX16)
2- li11n
3- li20
4- li21
During the count using li11n, if I find a batch that is registered in a different bin on the system, the inventory is not transfering this batch to the new bin, it is creating a new batch and keeping the old one.
Eg.:
If a batch is the bin "X" but phisycally is in the bin "Y", after the invetory count, the system will consider that I have two batches with the same code in both bins (of course, if I count only the bin "Y").
Why my system is not transfering the batches to its new (or correct) bin during a inventory?

SAP will not work like you expect.
This is your or the warehouse managers work.
They see the effect in the difference list and have then to analyze the root cause for this difference and take appropriate action.
If ithe root cause is just a mis-placement like you said,  then he has to do an extra inventory to correct the situation. This can mean that he can skip this bin from the count which was supposed to be in 4 month, but he can even count the bin again then..
but this is only way to correct the situation now.

Similar Messages

  • Batch wise inventory for FG

    Requirement:
    There are 2 plants AAAA-Manufacturing Plant, BBBB-Central Warehouse.
    Plant BBBB is procuring FG from AAAA. Its intercompany sale between 2 company codes.
    Batch (B1) of FG u2018Xu2019 with qty 100 is procured from AAAA with cost 1000.
    Batch (B2) of FG u2018Xu2019 with qty 100 is procured from AAAA with cost 1200.
    Client want to valuate the inventory with the Actual cost of each Batch procured.
    Since price control u2018Su2019 is used for FG, the inventory will be valuated with standard price.
    The difference between procurement cost and standard price will be posted to PRD.
    Client is not accepting the PRD account
    Hence batch wise inventory valuation needs to be done, But for that Price control u2018Vu2019 needs to used for FG.
    Price control V for FG is not advisable, as it will have impact on account management, Product costing in the manufacturing plant.

    Hi Vikas,
    The Query :
    DECLARE @WTREntry int  = 1
    SELECT T0."ObjType"
      , T0."DocEntry"
      , T1."DocLine"
      , T1."ItemCode" "ItemCode"
        , T3."DistNumber" "BatchNumber"
      , (T1.DocQty/Abs(T1.DocQty)) * T2."Quantity" Quantity
      , T2."BinAbs" "BinAbs"
      , T1."LocCode" "Whse"
      , T4."BinCode" "BinCode"
      , T1."LogEntry"
    FROM OWTR T0 JOIN OITL T1 ON T0."DocEntry" = T1."DocEntry" AND T0."ObjType"  = T1."DocType" AND ISNULL(T1."DefinedQty",0)>0
      JOIN OBTL T2 ON T1."LogEntry" = T2."ITLEntry"
      LEFT JOIN OBTN T3 ON T2."SnBMDAbs" = T3."AbsEntry"
      LEFT JOIN OBIN T4 ON T2."BinAbs" = T4."AbsEntry"
    WHERE  T0."DocEntry"  = @WTREntry
    ORDER BY T0."DocEntry", T1."DocLine", T1."LogEntry"
    Change the @WTREntry to your doc entry.
    Note the negative qty mark the direction is out.
    Positive qty mark direction in. If you need to get only the in, then filter the negative quantity.
    Also note that the above assume a transfer from Bin to Bin.
    Regards
    Edy

  • Auto creation of Stor Location and Batch during stock upload via MI09

    Hi Experts!
    Please guide me to configure automatic creation of storage location and batch during stock count through mi09.  Eg : I got material A in storage location 1000 and got batch 123 for this material. Then when i want to do the stock count, if i enter the storage location 2000 and batch 122 for this material, then system will auto create this storage location and batch in the master data.
    I tried to configure it in OMJJ for storage location but it is not working. Please anyone guide me step by step how to configure it. Storage location and Batch.
    Thanks.
    Crystal.

    hi
    check this
    Create Storage Location Automatically
    In this step, you specify whether the automatic creation of storage location data is allowed for goods issues and transfer postings.
    This is advisable if you work with negative stocks and a material's first movement may be an outward movement.
    Note that the reversal movement for a goods issue, for example, movement type 202 or 262, is not considered as an issue but as a receipt. If you only use the automatic creation of storage location data for reversals of goods issues, you do not have to allow negative stocks.
    You have to allow automatic creation per plant first of all. You then have to explicitly allow the creation of storage location data for each movement type.
    The storage location data is only created if the quantity is posted to 'standard' storage location stock. It is not created for receipts into a special stock (for example, into sales order stock).
    Default settings
    The standard system is set in such a way that the storage location data is created automatically for all types of receipts (goods receipt with/ without reference, stock transfers, intial entry of stock balances, reversal of goods issues, etc.).
    Activities
    1. Enter for each plant whether the automatic creation of storage location data is generally allowed.
    2. Specify the movement types for which storage location data is created automatically.

  • User Defined Characteristics not populating for Batch during GR of SC PO

    We have a requirement to populate the one characteristic ( Country of origin ) of batch during GR.
    After GR the characteristics value should be displayed in Classification Tab of MSC3N transaction.
    So that I have implemented the Enhancement MBCFC004 .
    Two conditions here for Populating the Country of Origin
    1) During GR of Standard Purchase Order the Characteristics (Country of Origin) value should be mseg-oic_oland1 ( Country from Extenal Details )
        For this condition the User Exit code is working perfectly and also updating classification in MSC3N .
        NO ISSUE for Standard Purchase Order.
    2) During GR of Subcontract Purchase Order the Characteristics (Country of origin value ) should be populated from the characteristics value of Batch of
          component Material .
        For this condition the User Exit Code is working perfectly , But NOT updating classifcation in MSC3N .
        This happens for Subcontract PO.
    Can anyone suggest solution , why this happening for Subcontract Purchase Order.

    Hi Sumit,
    I am not sure about your question, but if you want to populate the classification data during goods receipt then you need to maintain characteristics values in material master for classification tab under class type batch i.e. 022. After then it will apper during goods receipt for characteristics value for batch.
    Regards,
    Bhagat

  • Add new batch during count entry (for cycle count by quant LICC)

    Hi! We are using LICC for cycle counting by quant as we have mixed storage and do not want to count all the materials in a single bin. Most of the materials involved are batch-managed. One issue we have is we may discover other batches during stock take. In this case, how can we add this to the stock adjustment since we cannot add new item when we use cycle counting by quant?
    Appreciate your suggestion in this case.
    Cheers!
    SF

    Hi,
    Whenever you find discrappancies, in this case founds, you will note these down and first do an analysis whether this particular batch has been written off in the past as lost. When not, you will make a MB1À or MIGO booking to add this found batch to stock. When yes, you could do a reversal of the issue or do a new receipt.
    MdZ

  • Automatically create batch during return delivery

    Dear SD Gurus,
    Good Day!
    Is there any way to make the system to create batch automatically during return delivery??
    The requirement is, to get the system to work like MM where batch can be set to be created automatically by movement type. During return delivery, we don't have to select the batch but system will automatically create a batch.
    Thanks and have a nice day.
    Best Regards,
    Soo

    Hi,
    It is possible to activate batch during delivery/return delivery. However this again needs to be configured by the MM team. If you work along with the MM team, they should be able to enable this functionality.
    Certain functions like Batch Mngt, Outputs etc are independent of the module and they work based on teh applications.
    Hope this helps you
    YOu can reward if it helps you

  • Change Batch during TO Confirmation

    Hello
    I am looking at a problem regarding batches, we have a Warehouse with materials that are batch controlled, and they need to be that, but our problem is that there are several different batches in one bin, and the FIFO princip is not necesary, since this is mostly steel components like plates and pipes, and we need to now which batch went where, we trried the LIFO set up, but the handling of the materials are a bit random so this does not work, so I am trying to find a way to change the batch during confirmation Is there any way, or must i call in the abap man?
    Regards
    Ivar

    Hi,
    please refer below links...
    WM Batch change in Transfer Order
    Change batch during Transfer Order confirmation for Delivery
    Hope it may help you.
    Kuber

  • Account during inventory posting?

    Hi Guys,
    Can you give u detailed explanation of the following accounts during inventory posting?
    1.Incidental costs of external a 
    2.Inventory posting              
    3.Gain/loss from revaluation    
    4.Purchase offsetting account
    5.GR/IR clearing account         
    6.Cost (price) differences       
    7.Materials management exch.rate 
    8.Purchase account  
    These accounts can be obtained from simulating in OWMB with movement type 101.
    Thanks in advance,
    Alex

    Hi Alex,
    Basically the accounting entries you are checking in the OMWB belongs to movement type 101(As you know).So whenever GR is made following accounts are updated.Here few accounts belongs to if purchase offsetting account is active at your company code level which is purchase offset account and purchase account.
    Now if you are making a GR of total value 100 then flow will be as follows.
    Inventory account           Dr            100
    GR/IR clearing account   Cr             100
    If there is some price difference wr.t. MAP and PO rate then two case will be there
    1. Purchase account  will be debited w.r.t. difference amount if stock coverage is there.
    OR
    2. Cost price differece account is debited.
    In case of Material with standard price difference amount goes to
    Cost Difference again
    Material Management Exch rate accounts gets hit when there is difference in Foreign currency rate and your local currecy rate.
    I hope now you must have good idea of accounts as per movement type 101
    Regards
    Vivek Sharma
    -- Reward if helpful

  • Error when selecting batch during prod order creation

    Hi Gurus,
    When selecting batch for production orders components, an error prompted 'Invalid batch, does not match the selection criteria in batch determinat.'
    After checking, it is because the classification is not maintained. So I need to re-create in MSC2N.
    The question is, how/where should I change back the configurations on checking the batch classification during prod ord?
    Thank you.

    Kumar,
    Please let me know how many Component items are there in the BOM? Out of which how many are Phantom assembly?
    It looks like when the BOM is copied to the order it is crossing 9999 items.
    I would suggest you to use an intermediate order/material to reduce this number.
    I think there was an OSS notes for this to extend the number of character length for BOM items numbering (POSNR).
    Hope this helps...Reward your points,
    Regards,
    Prasobh

  • LMS 4.2.2 times out during inventory collection on VSS

    A customer of mine have 2 VSS systems for wich IC times out during collection when trying to read from flash on them. From the ICserver.log
    [ Thu Dec 13  16:45:19 CET 2012 ],WARN ,[Thread-20],com.cisco.nm.rmeng.util.logger.XDILogger,67,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.FlashAGI_CISCO_FLASH_Mib,g$eval,70,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS:FlashAGI_CISCO_FLASH_Mib:g$eval:populating FlashAG attributes failed via CFM, trying OCFM...
    [ Thu Dec 13  16:45:19 CET 2012 ],WARN ,[Thread-20],com.cisco.nm.rmeng.util.logger.XDILogger,67,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.FlashAGI_CISCO_FLASH_Mib,g$eval,90,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS:FlashAGI_CISCO_FLASH_Mib:g$eval:populating FlashAG attributes failed . Hence aborting fallback.:: com.cisco.nm.xms.xdi.ags.system.CollectionFailed: com.cisco.nm.lib.snmp.futureapi.SnmpReqTimeoutException: SnmpRequestTimeout on 10.2.0.1 while performing SnmpWalk(*) at index = -1
    [ Thu Dec 13  16:45:19 CET 2012 ],ERROR,[Thread-20],com.cisco.nm.rmeng.util.logger.XDILogger,57,com.cisco.nm.xms.xdi.SdiEngine,initAndEvalAGIs,385,com.cisco.nm.lib.snmp.futureapi.SnmpReqTimeoutException: SnmpRequestTimeout on 10.2.0.1 while performing SnmpWalk(*) at index = -1
    [ Thu Dec 13  16:45:54 CET 2012 ],ERROR,[Thread-20],com.cisco.nm.rmeng.util.logger.XDILogger,57,com.cisco.nm.xms.xdi.SdiEngine,initAndEvalAGIs,385,com.cisco.nm.xms.xdi.ags.system.CollectionFailed: com.cisco.nm.lib.snmp.futureapi.SnmpReqTimeoutException: SnmpRequestTimeout on 10.2.0.1 while performing SnmpWalk(*) at index = -1
    I have tried raising the "Transport Timeout" value in " Admin > Collection Settings > Inventory > Edit the Inventory/Config Timeout and Retry Settings" to 480000 msec but no difference. Am I tuning the wrong timeout value or is there a known bug for this?

    Sorry for posting. I found I was changing the wrong timeout value.

  • Batch wise inventory valuation

    Hi,
    what is batchwise inventory valuation?.how to design it in sap?
    Please suggest....
    Edited by: Venkatesh DY on Nov 25, 2011 7:37 AM

    Hi Venkatesh,
    May be the below links helps you
    Batch Wise Item Cost
    Automatic Split Valuated Batch Material
    http://www.sap-img.com/mm025.htm
    Dasaradha

  • Multilevel Batches during Goods receipt

    Dear MM gurus,
    I need your help to model following scenario.
    There are two batch /lot numbers in Customer system & we need to model it in SAP. Here are steps.
    - Good Receipt from Vendor will come with lot number which can be model as batch number in SAP.
    - During save in customer system, it will create new object called Box number by dividing Qty/Qty per Box(Standard data)
    - These box number are saved in the table & becomes main tracing number for subsequent issue to the shopfloor
    - Barcode lable contains both lot number provided by vendor & Box number... Lot number provided by vendor is same for all boxes , but box numbers are different.
    This seems like multiple batches/batch hierarchy , is there any way to model in SAP.
    Thanks in advance for help,
    Jatin

    Hi Ranganth
    I can get into the MIGO, but unable to post the GR.
    Kindly help me out. and error message as follows:
    Check table TFBEFU_CR: entry 10   does not exist
    Message no. M7001
    Diagnosis
    In table TFBEFU_CR the entry 10   is missing.
    Procedure
    Make sure your entries are correct.
    If table  has not been maintained correctly, please inform your systems administrator.
    Thanks & Regards
    Prasanna R

  • Batches with inventory

    I need to extract only those batches that have inventory in them with condition on matnr and werks

    Hi!
    Try using IKPF and ISEG tables.
    Regards
    Tamá

  • Blocking duplicate batches during GR (101's)

    Hi All;
    I have a requirement to prevent duplicate batch postings during Goods Receipt (101).
    My scenario is:
    A GR (101) posting will be performed for material “A” using Batch “B” with quantity 5tons.
    Another incorrect movement (duplicate – 101mvt) will be entered with the same combination (material “A” using Batch “B” with quantity 10tons.
    I need to block the duplicate 101mvt. However, it must still be possible to reverse (102mvt) the original 101 in case the qty was entered incorrectly.
    The unique check should therefore be on Material movement, Material & Batch combination.
    Also, if we decide to use a report to reveal duplicates (instead of system block), which tables will be useful? I’ve investigated MCHB, but only the qty is updated (no duplicate record created). The only table I can think of is MSEG (and that’s a lot of data to search…)
    Thanks

    Hi,
       You may maintain the message M7 668 as Error (E) in the path: OLMB - Define Attributes of System Messages -  with a message version, say Z1 as shown below:
       Now, go to SU3 transaction for the user profile of the users who are doing 101, and maintain the parameter ID: MSV with value as the message version (z1) as shown below:
       Now, the message M7 668 will be error message for only the users with the above parameter ID and will be warning message for all others. Please check the same and revert back.
    Regards,
    AKPT

  • Automatic activation of batch during material master creation

    Dear All
    Is it possible to activate batch management in material master while creation. This is required for specific material type and field MARA-XCHPF should be set automatically.
    Thanks in advance
    Regards
    Yogesh

    Dear,
    In OMS9 field for batch management MARC-XCHPF
    first check which field selection key is assigned to your material type in the filed slection group 212 (OMSR) there is field called MARA-XCHPF, and MARC-XCHPF.
    couble click on these fields and there is an indicator " prapose field content" , you need to select that indicator.
    Regards,
    R.Brahmankar

Maybe you are looking for