During setup of new Apple TV I am not able to progress past the screen that asks if I want to share usage info with Apple. Using both wireless and hardwire setup I've answered no - then yes - but I cannot get the system to accept an answer. Anyone else?
Aside from not being able to progress past the question of sharing info with Apple - I've also noticed that the remote does not function when I presss the "select" button - only when I press the "menu" button can I acknowledge a question or a step in the setup proccess. Help!
From: Test Screen Name [email protected]
Sent: Sunday, August 04, 2013 11:32 AM
To: gunner0490
Subject: I'm not able to open PDF files in Adobe Reader XI.
Re: I'm not able to open PDF files in Adobe Reader XI.
created by Test Screen Name <http://forums.adobe.com/people/TestScreenName> in Adobe Reader - View the full discussion <http://forums.adobe.com/message/5565198#5565198
Similar Messages
-
How can I get my old iTunes music onto my new computer without access to my old computer? I left my previous job and forgot to transfer my music. I bought iTunes match and it shows my old Mac as a device, but I cannot access any of the old music. All I can find are what was on my iPhone, but that's not what I want. I need all my old music from my old Mac, which has been wiped clean by IT at my old job. BUT, I did have iCloud at that time and I thought all my music would be accessible through it. I don't understand the Cloud! And I'm thinking spending $24.99 on iTunes Match was a waste of money because I still can't access my old music.
When you are done with this issue, consider the computer back at the office may still
have access to your iTunes account, and it should be de-auhorized. You can do that
remotely, but be sure you carefully do not mess up your other computer iTunes libraries.
Good luck & happy computing! -
I have a problem with my iPhone 4s. An Apple rep looked at the phone tonight and determined I will need a new phone. I am now trying to back up my data to iTunes but I cannot get the phone to turn on. I have it plugged into my computer monitor but it just slowly flashes the Apple symbol. Any ideas on how I can get it to power up for the backup?
Apple isnt here. this is a user based forum for technical questions. The solution is to restart, reset, and restore as new which is in the manual after that get it replaced for hard ware failure. if your within your one year warranty its replaced if it is out of the warranty then it is 199$
-
i have a 2004 30gb ipod colour.....it was previously set up so i could manage the music on an old mac book pro g4.....i now have a new mac book pro, but i cannot get the music from my old ipod on to my mac......how do i do this???
See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your Mac and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
Once you have successfully done that you can go ahead and choose Erase and Sync when you plug your iPod in.
B-rock -
I updated my first generation iPad to version 5.1.1 and won't go past the setup screen that asks if I want to use the iPad locator. I can go back but can't get any further
I just updated my original iPad 32 GB WiFi to iOS 5.1 about fifteen minutes ago. But I did it with the system restore feature in iTunes. So it wiped out everything on my iPad. But it did work. Then I restored an earlier backup and all went fine. Maybe you could try backing up your iPad and then using Restore to get it back to factory settings to see what happens.
-
i downloaded the icloud to my pc it says to login with apple id and it says it is a valid apple id but not cloud but i cannot get the control panel for icloud to come up to set it up on my pc which runs windows 8
An update.
From iCloud Control Panel 2.1.1 for Windows
"iCloud Control Panel 2.1 and later includes support for Windows 8"
but you still need to set it up on a Mac or iOS device, "Note: To create an iCloud account you need an iPhone, iPad, or iPod touch with iOS 5 or later, or a Mac with OS X Lion v10.7.5 or later." -
On Apple TV, my pictures have loaded, but I cannot get the slideshow function to work. It has been "loading" 28 pictures for five minutes. What am I doing wrong? I have Windows 7 on my PC.
I don't have any direct experience with D-Link equipment, but I may be able to provide some general advice. See if you can use a Web browser to connect to the D-Link's configuration screen. This probably involves visiting a URL such as http://www.192.168.0.1 . If you haven't changed the sign-on parameters, a quick Google search should find them for you.
Once there, note as many configuration details as you can find. You'll need those to configure your Time Capsule.
Use the AirPort Utility to configure the Time Capsule.
One last thing: It's quite possible that the Verizon network will have locked onto the "MAC" address of your D-Link router. Something needs to be done to reset this. If there's a separate box at your house that came with the FIOS equipment that's "upstream" from the D-Link router, I'd cycle power on it to see if that does the job. Otherwise you'll probably need to call Verizon to ask them to reset things once your Time Capsule is installed in place of the D-Link router. -
I have a Macpro13 version 10.6.8 and need to download Autocad 2015 which needs min version 10.8, but I cannot get the upgrade?
If your Mac meets the specs you can order it from here. You will receive a 'redem code' that should allow you to download it:
http://store.apple.com/us/product/D6377Z/A/os-x-mountain-lion -
In itunes, pressing alt to display the menu bar totally worked for my windows running machine but I CANNOT get the menu bar to show in itunes on my imac. what's with that?
You got me experimenting ... and it was viewing the display with the green button (rather than amber) on the left that revealed the menu bar. Hovering didn't do it. Thanks for your help. First time in Apple Support.
-
I lost my iphone and I use the locate iphone function to wipe to protect my information, but I cannot get the location to restore my iphone, can I request a permanent lock to prevent the thief from using it?, I call your call centre, your staff said they can do nothing, I am great disappointed as your advertisment said that we can protect our phone from lost, however, I think my phone has now been resale and reuse by others, but Apple cannot do anything with your so call "Find my iphone" function, I have brought 4 iphone and iPad for my family use, I will never use your product again and recommend to my company or friends anymore!
Philip SinYou are not addressing Apple here at all.
Apple can do nothing. Sorry.
Like any other make of any other phone, they cannot permanently disable it.
The thief is responsible. Not Apple. You seem to be directing your anger at the wrong people.
No phone manufacturer will do this.
"I am great disappointed as your advertisment said that we can protect our phone from lost, "
It mentions "loss" NOT theft. you cannot find a mention of theft protection. Find my iphone is NOT theft protection and has never been advertised as such. -
Someone sold iphone 5s to me, it's asking me the owner's ID and password but i cannot get the seller, what should i do?
Nguema wrote:
Someone sold iphone 5s to me, it's asking me the owner's ID and password but i cannot get the seller, what should i do?
If you cannot get the previous owner (who may not be the seller) to release it the phone is useless; return it to the seller.
Normally someone releasing an iPhone for resale will erase their personal data first (for obvious reasons). To do this they must release Activation Lock. So the previous owner either forgot to do this (unlikely) or the phone was stolen from them. If it was stolen then you are in possession of stolen property, which in itself is a crime, even if you didn't know it was stolen.
There are a few ways to find out who the phone is still locked to. You can try contacting them, but if the phone WAS stolen the outcome will not be a good one. So the best thing you can do now is return the phone for a refund. -
I could not update the new version of itunes 11.1.4.
It told me to uninstall the old version, but I cannot install the new version.
Any help?/ solutions?
Thank youHello jasopz,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Best of luck,
Mario -
A light comes on the built in webcam when I for instance, activate a Skype video call, but no picture comes through. I thought this might be a problem with Skype, so i instead tried to just use the webcam like a photobooth however the camera still would not work.
What do you think the problem is? How do I uninstall and reinstall the webcam, might that help? or is this not possible with a built in device?
Thanks.When I baught the PC I coud use it, then I put skype on it, it works on skype, but i cannot get a picture on the screen.
-
I have two iMac's on the same desk (about a foot apart). One iMac pairs with both keyboards and mice. The other pairs with the mouse only; I cannot get the keyboard to connect. How do I get a keyboard and mouse to connect to each iMac independently?
Antaeus00 wrote:
I tried sending a request for help,
But did you succeeed in sending a request for help?
Did you receive a response? How long has it been since you sent a request?
but I need someone with more authority to talk to.
There is no one with more authority than iTunes store support. We herem are only users. -
Both when I open Encore as a standalone program, and when I try and export my work via Adobe Link to Send to Encore, I get the same error message - "Adobe Encore has stopped working. Windows will close the program. Help would really be appreciated. Thanks.
Now that is impressive Stan, thankyou! So simple ... I don't suppose you know why the "build" button is greyed out do you? Don't worry if you don't have more "magic dust" at your fingertips, I'll re-check my settings again, and again ... Thanks for your help. Doreen.
Maybe you are looking for
-
Have html, now what to put swf onto website?
UBER Newbie, so please bear with me...thanks. (Referencing website www.ctfalliance.org) I needed to change a footer, which is a flash file. current one reads: Contact Us (and) Sitemap. Needed to change Sitemap to Members Section. Found the fla
-
Unable to describe the table as system user
Hi, I'm able to describe the below table as sys user but not able to do so as system user. SQL> desc IA_MBR_ID_D; Name Null? Type MBR_ID_EDW_SK NOT NULL NUMBER MBR_ID NOT NULL CHAR(3) MBR_SBSCR_ALTN_ID NOT NULL VARCHAR2(13) MBR_LST_NM VARCHAR2 MBR_FR
-
HP 6629A Driver for Labview 2009 may have a bug?
6629A config output.vi that came with the driver may have a bug. I am pretty new to labview so maybe I am incorrect, but the current range boolean was not wired to the T/F select block with the current limits for the instrument in high current and l
-
[nQSError: 46033] Datatype: 25 is not supported
Hi All, Ive imported a table from sql server into OBIEE repository now the issue is in the physical layer when we on viewdata for a particular coulumn it throws the following error and for the rest of the columns data is coming up. Datatype: 25 is no
-
We are using SAP business One 2005 B SP00 PL 06 , while creating New Company it display error message like entry already exist in table SEWSY. Please provide help.