DVD sound decod

to use the audigy s zs to decode doblby digital or dts from a dvd, does the dvd player have to be connected to the soundcard with a digital cable or will an analog one do? how about dvd-audio?

Okay, if you're using a DVD dri've in the PC then you don't need to connect any audio cables. Sound from DVD movies goes over the IDE bus, which means it'll go over the big flat grey cable that's already attached to your DVD dri've. Just make sure you double-check all the audio and speaker settings for the card and DVD software, and it should be fine.
Cat

Similar Messages

  • Installing iTunes distorts CD and DVD sound

    Please help! I installed iTunes on my new laptop and now any CD played through iTunes as well as ALL my DVDs sound scratchy or choppy. I restored my system to the day before I installed iTunes and the problem is gone. How can I install iTunes to prevent this sound distortion from occuring again? THANK YOU!
    Oaxaca Josh

    some preliminary questions before proceeding, Rachel.
    have the optical drives vanished altogether from "My Computer"? if so, can you check your Device manager for us? right-click "My Computer", select "Manage" and click "Device Manager".
    are there warning/alert messages showing up in Device Manager next to your optical drives? if so, are they citing code 41?

  • Is it possible to capture a DVD sound track it to GarageBand?

    Is it possible to capture a DVD sound track while it plays on iDVD using GarageBand or iTunes? Can it be Imported or Copied?

    brianfromcross plains wrote:
    Is it possible to capture a DVD sound track while it plays on iDVD using GarageBand or iTunes? Can it be Imported or Copied?
    You would use a 3rd party application like Audio Hijack to do that, then import into GB:
    http://www.rogueamoeba.com/audiohijackpro/

  • MPEG2-DVD / Sound cut off *urgent*

    Hi everyone
    I have a very urgent problem which makes me lose my hair...
    We have 190 minutes of 1920x1080 25p footage which we edited in Premiere Pro.
    I then proceed to export the files into MPEG2-DVD using 2-pass VBR with 1,65/4,2/6.25 bitrate (according to an online bitrate calculator).
    I multiplex the sound into the MPEG-2 file.
    When I import the timeline into Encore, it correctly tells me "do not transcode".
    BUT the sound cuts off short of the video. It does it for every chapter. I cannot 'extend' or 'pull' the sound to the length of the video.
    First chapter is 24:19, sound cuts off at 23:15.
    Anyone got an ìdea what I am doing wrong?
    Any help is greatly appreciated!
    Michael

    I'm in complete agreement with Jeff here as well - selling PAL discs in the US will sooner or later cause problems.
    Priobably sooner.
    In the old days you would not get the player to even load them - it would throw a "no disc" or another error of some description - and even when you did find the odd rare one that would load them, the TV systems would make sure you got a garbled image, or a B&W one. These days a good Universal Player will usually load all types (although again a regular DVD player will most likey still not go for it) but you will still have TV system issues.
    The problem is the mains frequency - PAL (Europe) uses 625 lines and 50Hz whereas NTSC uses 525/60, which effectively means PAL runs at 25 frames/second & NTSC at 30 frames/second. The 2 are incompatible. Most PAL players can handle both formats either by outputting NTSC discs as PAL-60 or even genuine "on the fly" conversions to 525/60 NTSC.  The process is not straightforward either - the player is handling scaling, temporal conversion and object motion analysis all at once (Hence why most PAL setups output NTSC as PAL-60 instead of pure 525/60 NTSC) and additionally the audio speed must be adjusted (remember DVD is a multiplexed set of VOB files, not separate streams) to conform to the different display rate - which may also prevent the use of a digital connection!
    This type of conversion is much, much less compatible the other way around. Most NTSC players still cannot play PAL discs (although as I have said a Universal BluRay player may do this) and only a very small number can convert 625/50 PAL to 525/60 NTSC.
    Let us now talk about MPEG audio & why it is not recommended to use it. This gets complex.....
    MPEG audio is a multichannel format using perceptual encoding at 16-bit 48KHz. MPEG-1 Layer II and MPEG-2 BC (backwards compatible) are the only allowed forms and the MPEG-2 that is allowed - BC - is a matrixed format, not discrete, in surround use. Use of this type (MPEG audio) was only ever optional in NTSC, never mandatory (so that is one big problem) and the other big problem is that MPEG-2 audio is only allowed in BC mode. Why is this evil? Take a seat & let me try to go through it.
    Because MPEG-2 audio decoders were not available at the time of DVD introduction, MPEG-1 was the only decoder available so that was what got used. As a result, the only permissib;le type of MPEG-2 allowed is BC, which is a matrixed stream type (the 5 main channels are matrixed into Lt/Rt stereo streams) and then encoded in the normal MPEG-1 Layer II format for DVD. The advantage to this is that a multichannel stream can be phase matrix encoded so that it will also play on a stereo system. MPEG provides pre-determined matrixing formulas depending on the intended audience - one is a conventional stereo signal, another is designed to deliver a Dolby Surround compatible (*not* Dolby Digital - that is something very different) system that re-creates the centre channel fronm the left/right channels in addition to a single rear (or surround) channel (Nerdy Note - this is actually a development of the old SQ Quadraphonic matrixing system, set up for LCRS instead of L-R-Ls-Rs). Additional discrete channel information, plus the LFE channel, is encoded in an extension stream so that an MPEG-2 decoder (not MPEG-2 Audio) can recreate 6 separate signals. Because of the necessity to be backwards compatible with MPEG-1 decoders the centre & surround channels that are matrixed into the 2 MPEG-1 channels (left & right) are duplicated in the extension stream. This allows the MPEG-2 decoder to subtract those signals from the matrixed signals, leaving the original Left & Right channels. All this adds an overhead of approximately 32kbps, making it rather inefficient.. The original 2-channel MPEG-1 encoding process was not developed with matrixed audio in mind and therefore may actually remove surround detail. Also, the process tends to expose coding artefacts as well so coupled with the whole shebang only ever being optional in NTSC 525/60 systems means that to use this as your solitary stream type is actually out of spec for 525/60 regions & players may well take one look at the disc & output...................in short, just a picture. And if that picture is 625/50 PAL, quite possibly not that either.
    Audio support in DVD.
    MPEG-2 audio is basically not supported except in BC moide, which hands everything over to MPEG-1 decoders. This is not good. It is not efficient, it can be riddled with artefacts & it is not supported by fiat in NTSC regions, only optionally. If it is your sole stream you will run into trouble sooner or later.
    I hope this helps, and I think I will go away & write a little article about this as it keeps cropping up every so often..

  • Soundblaster DVD sound is really

    So I have been contacting support for a month and they tell me they can not walk me through any of their suggestion.
    The problem pretty much is that the sound on my DVDs, CDs work fine, is bad, it sounds like it is not keeping up or is skipping.
    The guy told me look at the bios and change the PCI leniency settings. The website also offers some other things to try such as changing the AGP aperture size or the peer concurrency or PCI 2., I do not understand any of this.
    I have been repeatedly told to make sure my channels are set to DMA mode, they are.
    Some background on my system:
    I have a Pentium 4 processor with CPU with .80GhzIt then says, .79 GHz, 256 RAMThe computer is a Dell Dimension DIM2300I have 29. GB of free space on my hard dri've.
    I have soundblaster li've 24 bit, with the 5. analogue creativ speakersI have Power DVD, but am looking to buy software. They have also told me to check the decoder settings on my software. I cannot find them on Power DVD if you know where they are I would appreciate some information on that too.
    Please Help!!!

    Are you editing in Proxy mode by any chance?
    If you are, then unless you change to "Optimised or Original" in the dropdown menu at the top right of the Viewer, then Proxy quality is what will be exported.
    Andy

  • DVD sound but no video

    A135 S4666
    Vista Basic
    When I try to watch a DVD Movie all I get is sound no picture.  I can read/write CD's. I have tried several movies I know work on DVD player but will not now work on my laptop.  I use Win Media Player to view movies and it was working just fine last weekend when I watched several movies. 
    I did some tweakes and am wondering if they messed up my video.  I am enclosing the article that I used to tweak my computer. 
    "Windows Vista Tweaks
    “Techniques for improving the Vista experience.”
    by Michael J. Ross
    Microsoft has had a fairly difficult time getting Windows XP users to spend the time and money upgrading to Windows Vista, and there are many reasons for this: First, Windows XP had proven itself to be the best version of Windows, upon its introduction, especially in terms of stability and device-driver inclusion. Happy XP users were quite right in asking, "Why change?" Second, upgrading to Vista requires time, which is always in short supply for busy people. Third, there is the risk of rendering unusable any number of applications and hardware devices that are working fine. Fourth, switching to Vista involves not only the expense of purchasing a new Windows license, but the cost of upgrading your PC to match the significant increase in system memory and other components, as required by Vista.
    Also, Windows Vista is quite similar to XP in some areas, and largely unchanged in others. Admittedly, User Access Control is a very noticeable difference, but in a negative sense, because it repeatedly asks for confirmation of common tasks—all of which becomes rather annoying (we will discuss a fix for that in a moment). Windows Vista has a new search field in the Start menu, but most people do not use it or even know that it is there. In Vista's Control Panel, the number of items has more than doubled, and they are now organized into 10 categories. But many people—especially power users who have learned to perform administrative tasks as quickly as possible—much prefer the Classic interface with all cascading menus enabled, and thus will never see those categories. Most of the menu bars were removed, which is maddening for all users who came to rely upon menus for performing tasks.
    Finally, even though the very latest version of Vista and its service packs are causing fewer headaches than the initial version, there are still endless complaints about Vista updates causing PCs to freeze up, device-driver incompatibility, memory overload while copying files, Web access problems, applications being impossible to uninstall, unpatched but known bugs, and programs running much slower. The firestorm of criticism was so intense that consumer advocacy groups in several countries strongly recommended that people not purchase Windows Vista. Consequently, so many organizations and individual computer users have opted to stick with Windows XP (or even Windows 2000!) and eschew Windows Vista entirely, that Microsoft has been under constant pressure to extend the availability of XP until the release of Windows 7.
    Given all of the user interface and performance problems seen with Windows Vista, you would think that Microsoft would have tweaked it as much as possible before releasing it to the public. But such was not the case. Fortunately, there are many known techniques for improving the Vista experience, and we will examine some of the better-regarded ones.
    Services and Disservices
    Windows Vista's User Access Control (UAC) is an ill-conceived attempt to reduce the chances of malware infection by popping up one dialog box after another, asking you to confirm a range of everyday operations that used to be performed automatically in Windows XP. While increased system security is always a laudable goal, this was clearly not the way to achieve it. It did not take long for this new "feature" to become the most common sore spot for Vista users. Fortunately, the UAC nag can be silenced with little difficulty: Click the Start button, choose Control Panel, and then choose User Accounts (or User Accounts and Family Safety, if you are not connected to a network domain). Select "Turn User Account Control on or off." If you are prompted for an administrator password or confirmation, provide it. Uncheck Use User Account Control (UAC), and then click OK.
    There are other Windows Vista features, aside from UAC, that will largely do nothing more than slow down both you and your PC. They can be safely turned off manually. But you would have to do this every time you boot up your PC, because they start automatically when Windows Vista does. So it is best to completely disable them: Return to the Control Panel, choose Administrative Tools, then choose System Configuration, and then click the Services tab. Deselect the following services: Fax (unless you own and plan on using a fax modem), Offline Files (unless you plan on using Offline File Sync, which few people do), Tablet PC Input Service (unless you have a tablet PC), Terminal Services and Windows Search.
    Vista also has some unneeded features that are not listed as part of the automatic startup services. To turn them off, go to the Control Panel, select Program Features, and in the panel on the left choose "Turn Windows Features on or off." You can then disable the following items: Indexing Service, Remote Differential Compression, Tablet PC Optional Components, Windows DFS Replication Service, Windows Fax & Scan (unless you plan on using a modem for sending and receiving faxes, which few people still do), and Windows Meeting Space (unless you plan on using the Live Meeting Service). For those last two entries, if you are not sure at this time as to whether or not you intend to try them, it is best to disable them for now, because you can always reenable them later if needed, and you may forget to return to this part of the Control Panel to disable them.
    Resource Hogs
    As new and modified files are written to a hard drive, they may be broken up into pieces, with each piece located in a separate area on the hard drive. This fragmentation increases the amount of time it takes to read each file's contents, because the drive's head has to move a lot more to read those separate pieces. Defragmentation is the process of bringing all of those separated pieces together, and thus improves file-access speeds. Regardless of what operating system you are running, you should periodically defragment the hard drive. Do this anytime you are not using the computer, since it can be time-consuming. Unfortunately, Windows Vista does this continually, thus forcing you to endure the delays piecemeal. Click the Start button, and choose Computer. Right-click the C Drive, and choose Properties. Select the Tools Tab, then choose Defragment Now and uncheck Run on a Schedule. You should do this for all of your drives, if you have any other than the C drive.
    Do you frequently need to close your laptop temporarily, such as when using it when traveling? If so, then the hibernate feature of your operating system (Windows or any other) is a welcome method for avoiding the inconvenience and risk of shutting down all of your applications and then the operating system itself, only to have to reverse the whole process just to get back to where you were in your workflow. However, most people do not have a need for hibernation (at least for their computers; putting oneself into hibernation for a couple of years through the current economic crisis may be a tempting thought!). Windows Vista has its hibernation capabilities enabled by default, and they do consume a nontrivial amount of system resources. To turn them off, go to the Control Panel, choose Power Options, click Change Plan Settings, and then click Change Advanced Power Settings. In the Sleep section, go into the Hibernate After section, move the selector down to zero, and click the Apply button.
    There are many more ways to fine-tune your installation of Windows Vista, and they can be found by searching on the Web. No matter what changes you choose to make, be sure to first do a full backup of all of your important data (something you should be doing frequently anyway). If you are familiar with how to export a copy of the Windows Registry, do that as well.
    With these system tweaks and any others, you can improve Windows Vista to the point where it is quite usable—almost as good as XP!"
    Would any of these cause my video to stop working?  If not what can I do to resolve this problem. 
    I read all the articles in here and found 1 similar to mine and noticed you suggested deleting upper/lower filters in regedit.  Do I need to do this?
    thanks for any help you can give me.   I won't be able to read/answer until next weekend.     
    Glenda
    Solved!
    Go to Solution.

    Defender wrote:
    A review of your spec sheet indicates Vista Basic, which is a light coverall over XP., so those tweaks are nice but could be harmful.  When you place the DVD in did you select Media Player each time?  Was there any other selection you could have made? Feasible you reset the default to run under some other program.   Delete those tweaks and see if it clears the problem.
    Thank you defender, I will fix all tweaks I made and see what happens.
    thanksl..........glenda

  • Creative inspire t6300 5.1 surround on mac pro 1.1, optical out to 5.1 audio gear (digital sound decoder).

    Hi there,
    Been searching and trying a lot but no luck so far. I have a surroundset Creative Inspire t6300
    to be able to add some more fun to movies and a few games on my mac.
    I own an upgraded Mac Pro 1.1 under Snow leopard, 2.33 gHz, dual processor, 8 core, 8 gb memory.
    Even though it`s a piece for the museum, it works very well for designwork I do for work. No real need
    to update for me, so....
    As I understand, the optical out is standard 5.1. (By the way, the only other ports are the basic sound ports out
    and in on the Mac). So after some research I found and got the 5.1 audio gear decoder. I connected this with
    an opticle cable and used the 3,5 jackets from the surroundset  to connect to (from left to right) cen/sw, (yellow
    jacket) fl/fr (green jacket), sl/sr (black jacket) on the decoder. All perfectly understandable and it seemed to work well.
    But when I tested with some of the testfile you find when googling on that, I think there is something wrong,
    the typical surround effect is not there, it rather sounds more like stereo or even 5 mono`s.
    I`ve tried Soundflower and JackPilot, but couldn`t get it right. With Soundflower I was able to choose 5.1 setting
    (was not possible before) but testing it didn`t work.
    There is an extensive test of the decoder on the net by someone who really is deep into the technics of it all but
    no luck there either.
    Back to basics: is it right that the optical out is truely 5.1 on the mac? With several tests the unit SFE does not react.
    But when I play some music with iTunes, it works (loud and clearly :-)).  Maybe I need a visit to the audiologist ;-) ?
    Anyone?
    tested with: http://www.youtube.com/watch?v=eL9-sIZRDHg&channel=alexnosenko
    http://www.youtube.com/watch?v=sMh_zvCw6us
    https://www2.iis.fraunhofer.de/AAC/multichannel.html

    Hello John, I figured it was a signal issue. All the speakers fire and the sound is great. I was running the speakers thru a Dell PC with a Creative X-Fi Elite Pro, THX Certified, 7.1 soundcard using a fiber optic from the Mac Pro to the Z906's, it worked great until the Dell died!!! When I bought the soundcard from Creative I also bought the GigaWorks S750, THX Certified, 700 watt, 7.1 speaker system, used the speakers for 11 years and then the woofer/amp said "I QUIT" Creative quit making the speaker system and the sound card. The satellite speakers from the Creative GigaWorks speaker system still sound great (rated at 78 watt each) and are a little better speaker than the one's that came with the Z906 and the wattage from the 906 is sufficient to drive the satellites without any distortion. Thank you for addressing my issue, you confirmed what I suspected all along, just needed to hear it from someone with the same setup.
    One last question, I purchased a Diamond Multimedia USB Soundcard, can't use the fiber optic(not supported by Mac) but the green, tan and black RCA's plug in and produces adequetly. When you plug your 906's into the Mac Pro using the fiber optic how do you set your speaker configuration? When I plug into the mac pro with fiber optic the 'Audio Midi Setup' does not seem to see the 5.1 configuration. Any thoughts there?
    Carl

  • DVD Sound issues with Siundblaster Audigy ADVANVED

    Hi. I've searched endlessly through the net and this forum, but so far I havent found a resolution to my problem.
    When I play DVDs I get very bad popping. Its identical for each DVD and makes watching a DVD on my PC unbearable. I dont have any problem playing music (any format) or video from the HDD, or audio CDs for that matter, but DVDs are aweful. I tried following the steps from a link in the "Read beofre you post" sticky, but no fix. Initially I thought it may be a problem with my DVD dri've, but I installed a second (3rd party) dri've and I get the same problem, which leads me to think its this ADVANCED MB software. The problem is the same in dedicated DVD software as well as Media Player.
    I'm using a Dell Dimension 550 with Sound Blaster Audigy ADVANCED MB.
    Any help would be appreciated.

    BUMP

  • No DVD Sound - KT6 Delta FISR

    Hello,
    I'm in trouble with my motherboard KT6 Delta FISR : drivers are installed, configured, everything is ok, music is working, video CD also, but no sound if I try to run a DVD !?!? No mean to get sound on the analog output. Tried everything but cannot find the solution.
    I think it could be a problem with sound output, for example sound only going on the digital output SPDIF and not on the anallog, but I need help to change that !
    Can anyone help me please ?
    Thanks a lot
    Chris

    Hi,
    Yes I'm quite sure, it's not the first time I configure an MSI motherboard, settings are tu rear output, and configured for stereo speakers. Music, wav, VCD is working, only DVD has no sound. Is there a special setting, hided somewhere, that would be something like "disable analog output if digital sound present" ?
    Thanks
    Chris

  • HDV DVD sound problem

    I'm shooting HDV 1920X1080 16:9 footage and editing with Final Cut Express. Everything looks and sounds fine when I edit but as soon as I create a DVD with iDVD the audio sounds overmodulated.
    What's going on here? And why does everybody say you can't create HD discs, iDVD help says that I can.

    Just in case anyone sees this thread and has a similar problem, I solved it. My Final Cut was automatically putting the PAN level to -1 on every audio clip. Since I'm using mono, not stereo, I switched the level to 0 on the clips. Now everything is fine.

  • DVD Sound Quality After Transferring to iPod

    I have finally been able to transfer a previously owned DVD to my 30gb iPod and the picture quality is great! However, the sound quality is not up to par. The audio (but not the video) to the DVD when playing on iTunes and the iPod is "skipping." I used the following programs to transfer the DVDs to iTunes:
    DVD Decrypter
    Digiters DVD to iPod Converter.
    Does anyone have any suggestions on how to clean up the sound quality? Any suggestions on good, easy-to-use software for ripping and converting?
    THANKS!!!

    OK, so I went back and listened again to the tracks in iTunes, and it turns out that for some reason even though I thought I checked the "use error correction" box on my home computer's iTunes, error correction wasn't turned on after all. I noticed because I did hear the distortion on the playback of one song when played from iTunes. I am in the process of re-importing a couple of cd's with error correction turned on, and I am pretty sure this is the problem. I re-imported the one song I noticed it on originally and it got rid of it. I listened to one of the cd's back this morning in iTunes and didn't notice the distortion, but apparently it was there and I just missed it. So, chalk this one up to user error/self pwnt, haha!

  • Importing a DVD sound track

    Is there a way to import a sound track from a DVD into itunes then copy it to an ipod?

    Audio Hijack will work, but it is a real-time process and records all sounds, including system sounds, when recording.
    Instead of recording, you can "rip" the audio only from a DVD and convert it to MP3.
    It is not a quick process, but it certainly can be done. I have followed this process for several concert DVDs that I own and I am quite happy with the results. Best of all, it can all be done with free software, but there is one small program to buy to give it a more professional touch and amke it much easier on the ears.
    First, download OSEx. This will allow you to extract only the audio files from a DVD.
    To demux/extract only the audio with OSEx, splitting the audio in one file per chapter (usually equivalent to a song for music videos):
    - After starting OSex and inserting your music video DVD, make sure the correct title is selected by clicking on the "TI" button.
    - Click on the "VID" button an deselect the video stream(s).
    - Click on the "Aud" button and select the appropriate audio stream (usually 2 channel AC3).
    - Click on the "Fmt" button and select "Elem. streams."
    - Click on the "Seg" button and select "Chapter" to split the audio by track in separate files.
    - Click "Begin" to start audio axtraction.
    If you have a few songs that span several DVD tracks and have no break in them, you can encode them as one audio track by selecting those tracks together and encoding them as a single selection.
    Then, download mAC3dec. This is a program that will convert the resulting AC3 files from OSEx into MP3s. I use the highest bitrate - 320 - so that my audio is as close to the source as possible.
    Then - the finishing touch - but one that costs $10.95. It is well worth it. Download MP3 Trimmer. This sweet little program allows you to trim the beginning and ends of files off and even apply a fade in and out without re-encoding the file and eliminating the resulting loss of sound quality. This means that you can cut the applause out of the beginnings and endings of the tracks, and since you can fade in and out, you lessen the "shock" of the breaks in the tracks that can be so annoying.
    All in all, it sounds harder than it actually is, but it is well worth it for a whopping $10.95 for all three programs.
    BTW, I am not connected with these companies at all and receive no compensation of any kind. It is just a process that I did a lot of research on and came up with these three programs and the steps to create a nice, professional sounding CD from concert DVDs.

  • DVD sound quality

    My MacBook Pro 17 inch, 2.4 ghz is having sound issues when playing dvd's. The sound volume fades lower then back to normal throughout. I've used many different dvd's, all new and clean.
    Any help out there?

    I’m not sure, but there is a setting in DVD Player’s preferences to disable DolbyDRC which is a feature(?) to reduce audio volume when it gets loud in order to protect your speakers. The setting is on the 2nd tab called DVDs.

  • DVD sound track

    I am burning DVDs that need no sound.
    Can you Burn a disk that skips that part of the encoding?
    Just want to speed up the encoding.

    Well... that would be a no... and yes.
    If there's no audio already in your sequence, then there is nothing for iDVD to encode. If you have audio in your sequence, then there is no way to break it out in iDVD short of going back to your editor (iMovie, FCE, etc) and deleting the audio.
    However, for what it's worth, I don't think you will see huge time improvements in the compression. iDVD uses uncompressed audio and I should imagine that the math is near the same with or without.
    Mike

  • Dvd sound with Ext

    I bought an Extigy last Xmas. Everything about it works well except...No matter what DVD player I use, my sound for all DVD's is crackly and breaks up...Creative did a special tech support where they even called me for a whole month. I finally gave up because they could never figure it out.
    I could play DVD's fine "before" I purchased the Extigy. I have a Dell 4600. I do not have 5.. I have 4 point surround speakers/FPS2000 by Cambridge. I think I have tried everything possible...but, I would like to play my DVD's! There have been no new Creative updates for the Extigy since 2003. Some have suggested that the Extigy just does not work for this...could that really be possible?
    help
    Mike

    Hello...
    Wow! Someone trying to help me! I'm sorry, never in my life have I come so close to giving up.
    Ok... The closest to feeling that a "symptom" was showing itself , was when someone talked me to the Device Manager and down to IDE settings. When you go to the Secondary IDE Channel Properties/Advanced Settings...Device is my DVD. "Auto Detection" is showing and is greyed out. Where it says: "Transfer mode "DMA if available" it is showing "STILL in PIO mode". The tech that got me there said something pretty complicated had to be done...So...What do you think? Another person suggested USB cable could not handle this sound and produce a clear listening. Boo! No. I thought I had this set up to remind me to check this or let me know when new replys happen. I tend to forget about it...Luckily.
    I will check soon.
    mike

Maybe you are looking for