DW CS4 Will Not Start

I'm using DW CS4 and have been for many months without any problems - Version 10.0/Build 4117. All of a sudden it will not start, When I click on its icon I see the big green DW block and then a Microsoft notice saying Dreamweaver CS4 has stopped working - a problem..... and the only choice I have is to close the program. I've restarted my computer and tried again, with no success. The program sits in my Program Files/Adobe folder on my C: drive.
I badly need the program for the work I'm doing. I've added no new software to my computer lately - at least none that I know of.
Any suggestions?
Joe

Hi Thanks for this. I tried what you said the problem I have Win Vista and have installed dreamweaver cs4 Trial. I have Dreamweaver MX as well and have given up trying to use this on my vista machine. I can run CS4 on XP without any issues. Clearly this is a Vista use, but I can be alone with this problem can I?
When I try to run it It will not get past the splash screen, then reports the following.
I have tried turning off UAC and runing as Admin.  Here is the error trail
Description:   A problem caused this program to stop interacting with Windows.
Problem signature: Problem Event Name: AppHangB1 Application Name: Dreamweaver.exe Application Version: 10.0.0.4117 Application Timestamp: 48c874b4 Hang Signature: b4b6 Hang Type: 0 OS Version: 6.0.6001.2.1.0.768.3 Locale ID: 5129 Additional Hang Signature 1: 3ff7ef531c8f561f7432659a0b9534bf Additional Hang Signature 2: d4fd Additional Hang Signature 3: 044608c4cccbc38d42ab3134e57441d2 Additional Hang Signature 4: b4b6 Additional Hang Signature 5: 3ff7ef531c8f561f7432659a0b9534bf Additional Hang Signature 6: d4fd Additional Hang Signature 7: 044608c4cccbc38d42ab3134e57441d2
REALLY hope someone can help
Martin

Similar Messages

  • Photoshop CS4 will not Start

    Hi, i'm usually quite responsible when it comes to making sure my system can coap with what i am asking of it, but i've ran into a problem that my computer just can't seem to get around, and means that photoshop cs4 will not start up.
    I've been making .PAT files from a few pattern sourcebooks i've recently brought. The first two went fine, but a japanese sourcebook contained 250 reasonably hi-res pattern images which i put through an automated action which set them all as patterns for me for the Pattern Overlay option in beldning options. When i did this i noticed my computer started to slow down near the end of the process, so i saved out the .PAT file from them, and quit photoshop to free up over 2.10GB worth of data. I have 4GB on a 32bit XP, but only 2 and a half-ish is seen by windows due to the hardware installed aswell. Of course i plan to chnage this to 64bit soon, but anyway, when photoshop now is told to start up, it reads everything normally, then gets to "Reading Preferences", and crashes with an error report, which watching my task manager, i belive to be linked to memory shortage from having to load the patterns up.
    I reset my preferences to see if it would set them all back to default and not read the added pattern files, but that made no difference. Any ideas?
    Thanks in advance!!

    I'd look into doing a couple of tests:
    1.) Move those PAT files elsewhere
    2.) Eliminate all programs and Processes, that are unnecessary. Task Manager>Processes will give you a list of all that load, and you can probably stop half of them with no ill effects. I'd use MSCONFIG, so you can go back and easily activate them later.
    3.) Reboot and see what happens.
    Note: John's suggestion on the Presets folder might address #1, but I'd also physically Move them. It sounds like you're running totally out of resources to run PS, so Textures, and such, might be an issue too.
    A question: how are your Scratch Disks setup and please tell us about your I/O sub-system, i.e. the internal HDD's, their size, free space, speed, controller type and how these internal HDD's are allocated. Especially tell us if you have any physical HDD's partitioned.
    Good luck,
    Hunt

  • CS4 will not start.

    My CS4 will not start. I removed in through the control panel and reloaded.  It still will not start.  What should I do?

    Your reference to the Control Panel sounds like you are using Windows?  What I suggest is that you unistall again, and then use the Cleaning tool from this link
    http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
    Hopefully it will install and work OK after that.  If not, come back, but tel us exactly what operating system you are using.

  • Adobe dreamweaver cs4 will not start up just splash screen

    i have installed adobe cs4 master collection all is fine except for dream weaver ,when i try and start it the splash screen pops up but then goes off ,all other programs are fine they start no problem ,please help any ideas tried re installing cs4 but still no joy.
    thanks
    keith

    Yes - this is posted multiple times daily on the Adobe Dreamweaver
    forums....
    Here is a reference post if you have an Acer computer
    http://groups.google.com/group/macromedia.dreamweaver/browse_thread/thread/d20abb069b29048 6
    and here is the file to download -
    http://www.egistec.com/oem-acer001/program-update.html
    Murray

  • Bridge CS4 will not Launch

    Recently I tried to upgrade my Mac G4 Tower from OS 10.4 to OS 10.5 and it failed, even though I met all requirements. I had to reinstall 10.4 and now Bridge CS4 will not launch.  It worked fine before. I uninstalled PS CS4 and reinstalled it, I tossed prefs & cash files, I reset prefs but still no luck. Any suggestions before I strip down the whole HD and start from scratch?
    gardon4

    Any suggestions before I strip down the whole HD and start from scratch?
    My first go would be to buy a new HD and replace this with your current in
    the G4 and give a clean install of 10.5 to try if it will work.
    If you downgraded without a clean install from scratch you sure will end up
    with conflicting settings for applications.
    You could try to back up all custom settings, actions, tools etc and then
    deactivate the suite with erase serial number.
    Then find the clean tool for Adobe
    http://www.adobe.com/support/contact/cs5clean.html
    and run this script, it says CS5 but to my knowledge it also finds files for
    the CS3 and CS4 suite. Do a search for any adobe files from user and system
    library and delete those also. Then install the CS4 suite again.
    But again to be honest, you are using a computer that in current digital
    terms dates from the 'stone age' and in now way can cope with the needs for
    the use of digital files nowadays. It might be wiser to try and find a used
    MacPro (or even a used iMac with intel processor) that will give you much
    more profit in speed, disk space and processing  instead of investing more
    time and money in new disks and install procedures...

  • Dreamweaver CS6 will not start

    I've had this problem for several weeks and thought I had it fixed by resetting the Preferences (http://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs4-cs5.html), however, my DCS6 application will not start again, and it seems to happen when I'm out of my docking station, and working from home.
    Initally, I uninstalled/reinstalled DCS6 twice, and each time it worked, and then stopped working when I got out of the dock.  Then, as I said, I found the documentation to remove the established Preferences.  It worked fine in the office, but will not load again working from home.
    The DW logo comes up on the screen, but hangs there.  It never loads plug-ins or any of the other animations I normally see on the logo screen during a normal launch.  The only way to stop the logo is to open Task Manager, locate Dreamweaver(whatever).exe under the Processes Tab and End Task.  Dreamweaver is not listed in the Applications Tab.
    Fortunately, Dreamweaver CS5.5 wasn't automatically deleted when I installed the new software, and it works fine, so at least I can get my work done.
    i need some help with this, please.
    Thank you.
    Frank

    So I take it that you have also cleared the registry entries as suggested in the document linked in your first post.
    So we now need to prove that your Windows Profile isn't the culprit to make DW un-startable.  To prove this, create a new user account  on your machine (temporary or otherwise).  To do this follow these instructions:
    To create a user account
    To open User Accounts, click the Start button , click Control Panel, click User Accounts and Family Safety, and then click User Accounts.
      Click Manage another account. If you're prompted for an administrator password or confirmation, type the password or provide confirmation.
      Click Create a new account.
      Type the name you want to give the user account, click an account type, and then click Create Account.
    Please post back if this worked or not.  If it worked then you may want to use this account for your DW work otherwise we need to find some other solution.  Make sure the account is Limited if you plan to use for everyday work because creating an Administrator account is not advisable.
    Good luck this time.

  • Received jpg CS4 will not open

    I received a jpg from a customer today that CS4 will not open but CS3 will. CS4 just hangs. I closed down the program and tried this several times. CS4 opens other jpgs just fine.
    I am on a Mac Pro w/5 gig of RAM. Have experience no other problems.

    Yes you probably lost a pixel or two when you saved it as a jpeg again. But, since they are sending you a jpeg in the first place I'm going to take a guess that it's just so you can preview it.
    Also, this issue is not consistent. If it were true that every time someone received a jpeg it didn't open in CS4, the forums would be flooded.
    Odds are it's just saved with something strange that is tripping CS4 up (like an ICC profile). It could be 3rd party add-ons. Could be preferences. If you start seeing it happen more from this particular person but not from others, then it's probably a setting applied to the jpeg on her end.

  • System PI 7.11 will not start because of R3INLPGM error

    Dear experts,
    our PI 7.11 sap system will not start on the backup machine. We have two AS/400 machines using IBM iCluster.
    On the source node the PI system starts without any problems. If we switch over to the target node,
    the PI system will not start. Only the two subsystems R3_<instance> were started and the SAPSTRSVR jobs
    ran under QUSRWRK.
    In the pool files from SAPSTART we found the following errors:
    QPRINT:
    R3<SID>400/R3INLPGM: Error occured setting gid to R3GROUP.
    QPJOBLOG:
    *NONE      Information                 XXXXXXX  SAPINLPGM    XXXXXXX *STMT    SAPINLPGM   XXXXXXX *STMT
                                         From module . . . . . . . . :   O4TMKLIBIX                                                                               
    From procedure  . . . . . . :   prtjoblA                                                                               
    Statement . . . . . . . . . :   15                                                                               
    To module . . . . . . . . . :   O4TMKLIBIX                                                                               
    To procedure  . . . . . . . :   prtjoblA                                                                               
    Statement . . . . . . . . . :   15                                                                               
    Message . . . . :   SAPINLPGM: Error in ChangeGidToR3GROUP - check whether              
                                         R3<SID>400/R3INLPGM is owned by QSECOFR using adopted authority         
    But the authority from all libs and objects are same as on the source machine.
    Any idea?
    Best regards,
    Matthias

    Hello Matthias,
    Please log on as QSECOFR (or a user with SECOFR authority),
    ADDLIBLE SAPXIP71
    and run command
    FIXSAPOWN SID(*NONE) DIR('/QSYS.LIB/R3XIP400.LIB/R3INLPGM.PGM')
    Best regards,
    B. Wolf

  • My ipad will not start.  It is 1 year old...I have tried holding the two buttons and nothing..I have it connected to my desktop and it will make a ding noise but nothing comes up on the screen.

    My ipad will not start.  It is 1 year old...I have tried holding the two buttons and nothing..I have it connected to my desktop and it will make a ding noise but nothing comes up on the screen.

    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    iPad Frozen, not responding, how to fix
    http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    Black or Blank Screen on iPad or iPhone
    http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

  • Settings (and other Apps) Will Not Start (Metro)

    This morning most Modern Apps will not start on my system, including the Settings app. It seems to be a DCOM failure and seems directly related to this old thread.
    http://social.msdn.microsoft.com/Forums/en-US/7e6fe520-af09-4a38-b333-30ed5978f70c/control-panel-will-not-start-metro?forum=windowsdeveloperpreviewgeneral
    This is a current Windows 8.1 installation, full up to date on patches, and the problem still occurs after rebooting. I checked for newly installed patches, etc. and the only thing recent was the Windows Defender definitions update.
    It's an i7 with 32 GB of RAM, fast SSD's etc. I don't believe this is a hardware problem in any way.
    Here's the details from the System event log:
    Log Name:      System
    Source:        Microsoft-Windows-DistributedCOM
    Date:          19-Jun-2014 09:21:53
    Event ID:      10001
    Task Category: None
    Level:         Error
    Keywords:      Classic
    User:          SARSYS9\Michael Sargent
    Computer:      SarSys9
    Description:
    Unable to start a DCOM Server: microsoft.windows.immersivecontrolpanel as Unavailable/Unavailable. The error:
    "15612"
    Happened while starting this command:
    "C:\WINDOWS\ImmersiveControlPanel\SystemSettings.exe" -ServerName:microsoft.windows.immersivecontrolpanel
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-Windows-DistributedCOM" Guid="{1B562E86-B7AA-4131-BADC-B6F3A001407E}" EventSourceName="DCOM" />
        <EventID Qualifiers="0">10001</EventID>
        <Version>0</Version>
        <Level>2</Level>
        <Task>0</Task>
        <Opcode>0</Opcode>
        <Keywords>0x8080000000000000</Keywords>
        <TimeCreated SystemTime="2014-06-19T13:21:53.648625200Z" />
        <EventRecordID>546613</EventRecordID>
        <Correlation />
        <Execution ProcessID="972" ThreadID="4068" />
        <Channel>System</Channel>
        <Computer>SarSys9</Computer>
        <Security UserID="S-1-5-21-802678348-186571299-231467638-1001" />
      </System>
      <EventData>
        <Data Name="param1">"C:\WINDOWS\ImmersiveControlPanel\SystemSettings.exe" -ServerName:microsoft.windows.immersivecontrolpanel</Data>
        <Data Name="param2">15612</Data>
        <Data Name="param3">microsoft.windows.immersivecontrolpanel</Data>
        <Data Name="param4">Unavailable</Data>
        <Data Name="param5">Unavailable</Data>
      </EventData>
    </Event>
    That matches almost exactly with the referenced thread. But that thread never seemed to give a set of steps to resolve the issue (other than doing a Refresh which would be a catastrophic waste of time, reinstalling my whole development environment).
    I really would appreciate some help resolving this issue. If I'm in the wrong forum, please move or suggest a more appropriate place.
    Thanks,
        Mike

    Please post questions and problems about using Windows in the Windows forums on
    http://answers.microsoft.com
    The MSDN Windows Store apps forums are for developers to discuss writing their own Windows Store apps.
    --Rob

  • HT5654 Just tried 3 times to update iTunes on my PC running Vista.  There was an error.  It stopped the installation.  Now iTunes will not start at all.  The error message tells me to reinstall which I tried but did not work.  What should I do?

    Just tried 3 times to update iTunes on my PC running Vista.  There was an error.  It stopped the installation.  Now iTunes will not start at all.  The error message tells me to reinstall which I tried but did not work.  What should I do?

    Hello, Jdragone. 
    Thanks for the question.  Start with completely uninstalling iTunes and all of it's components in the order specified in the article below.  Once this is done, download and install iTunes.
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/HT1923
    If you receive any errors when uninstalling any components of iTunes, try the steps in the article below for each component that gives you an error.
    "The feature you are trying to use is on a network resource that is unavailable" alert appears when removing Apple software in Windows
    http://support.apple.com/kb/TS3704
    Cheers,
    Jason H.

  • HP TouchSmart application will not start

    We purchased an HP IQ 526 TouchSmart desktop with Windows Vista Home Premium 64-bit machine approximately two months ago. We use Clearwire to connect to the internet. About a month ago the HP TouchSmart applilcation stopped working. It will not start. Every time we try to start it we get the following error message:
    HP TouchSmart Calendar has stopped working
    A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.
    Sometimes it says it's the HP TouchSmart Notes has stopped working or one of the other TouchSmart applications. I went to hp.com and updated all of the software for the TouchSmart application and Windows Vista. And I reguarly use Windows Update to ensure my OS is current with Microsoft security updates. I also updated the firmware. After these actions and rebooting many times the application would still not start. At this point I contacted HP customer support. We uninstalled HP TouchSmart, then reinstalled. This didn't work. I continue to see information events in the Windows Application Log almost every minute regarding HPTouchSmartCalendarNotes. They are typically the following messages over and over:
    Reminder clock elapsed event is successfully fired.
    CheckReminder() is executed successfully.
    ShowReminder() is executed successfully.
    After Fetching the XML nodes, checking for each node is done successfully in ShowReminder()
    Events in Events.xml Before Showing Reminder<DataRoot></DataRoot>
    I still have a case open with HP support and they said uinstalling the OS and reinstalling is likely the next step but I have to believe someone else has run into this issue or HP has a QFE for this issue. I really do not want to uninstall the OS and reinstall it. This has become very frustrating as the HP TouchSmart application is the primary reason we purchased the computer so my wife can manage our photos and music collection via the touch screen.
    If anyone has seen this before or has a solution I would love to hear about it. We are considering taking the computer back if we can not resolve this issue.
    On a related note and this might be a separate issue I continuously get HPTCS stopped working messages. I've searched the internet for what HPTCS.exe is and what is does but there is little to no information available.
    Please let me know or if there is additional information I could provide that would be useful for troubleshooting.
    Cheers,
    G

    Our machine was sent back to HP and they reformatted our hard drive and sent it back. Wow. Fantastic service. NOT!!!! I could have done that. Without debugging their own software to figure out why this was happening they reformatted the hard drive. I can only expect this problem will happen again since there must be a software update, etc... that is causing this behavior. I honestly do not know how to voice my disgust in their customer service. I have been a long time fan of HP and we basically only buy HP at work but this was the poorest display of customer service I have ever encountered. If your TouchSmart application stops working and the TouchSmart software updates do not resolve the problem you might as well pretend like you bought a normal computer without touch capabilities. Like buying an iPhone without it behaving like an iPhone.

  • Firefox will not start on limited account. Reports firefox already running but doesn't show in task manager. Adminstrator account work fine

    Firefox will not start on limited accounts. It reports firefox already running. This happens even if no other users are logged on. Administrator accounts have no problems accessing firefox

    Create a new profile as a test to check if your current profile is causing the problems.
    See Basic Troubleshooting: Make a new profile:
    *https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
    If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
    See:
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  • Oracle 10G Non-Network install - OEM will not start when on the LAN.

    Greetings,
    Got through a non-networked 10G Enterprise installation OK; I chose to create the orcl schema, connected to it through various utilities, added new tablespace, and all was well. I also checked my Host Name by pinging it in DOS, it showed me the IP address of the MS loopback adapter which is what I was expecting.
    Once I connected the same machine to the LAN (and internet) and re-booted, for some reason the Host Name was now assigned the dynamic IP address of the LAN and not LAN2 (which is the loopback adapter that is assigned a static local IP address). It did this even though I had already added an entry in the /etc/hosts file that explicitly assigns a static IP address to the Host Name (as recommended in the Oracle 10G pre-installation instructions). I also could not get the OEM to launch a webpage, run and connect to the orcl database after the re-boot; I am wondering if this is related to the IP address assigned to Host Name changing; maybe the Oracle agent can no longer resolve the URL for some reason?
    In the end I find that the only way to insure I can have a working Oracle environment and be on an active network at the same time, is to bring up the Oracle environment on a standalone system first, and once Oracle is running connect the system to the network. Is there no way to automate this process?
    The format of the hosts file entry recommended by the Oracle 10G pre-installation instructions is as follows:
    ===========================================================
    IP_address hostname.domainname hostname
    where:
    IP_address is the non-routable IP address you entered for the loopback adapter.
    hostname is the name of the computer.
    domainname is the name of the domain.
    For example:
    10.10.10.10 mycomputer.mydomain.com mycomputer
    ==========================================================
    In my case since I am not part of a Windows domain (but am part of a Windows Workgroup), I added an entry in the /etc/host file that looks like the following:
    # Copyright (c) 1993-1999 Microsoft Corp.
    # This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
    # This file contains the mappings of IP addresses to host names. Each
    # entry should be kept on an individual line. The IP address should
    # be placed in the first column followed by the corresponding host name.
    # The IP address and the host name should be separated by at least one
    # space.
    # Additionally, comments (such as these) may be inserted on individual
    # lines or following the machine name denoted by a '#' symbol.
    # For example:
    # 102.54.94.97 rhino.acme.com # source server
    # 38.25.63.10 x.acme.com # x client host
    127.0.0.1 localhost
    192.168.110.250 IBM-6AB1330E158
    ==> Note that I did not add the domain name to the entry I created since I am not part of a domain, I also used the format I found in the etc/hosts file which is:
    IP_address hostname.domainname
    - not -
    IP_address hostname.domainname hostname
    Which is the format recommended in the Oracle 10G pre-installation instructions; this does leave me wondering which format is correct...
    Thanks in Advance for any help,
    ADG13

    I have not. I am hoping someone (maybe even from Oracle support) will step up and officially tell us we are either right or wrong in the way we are approaching this. From the research I have done on the internet it sounds like this should work, you should be able to have Oracle starting and running fine whether you boot connected to the LAN or not, assuming you have created the MS loopback adapter, assigned it a static IP, and changed the hostname entry in etc/hosts file as part of the 10G WinXP recommended pre-installation instructions.
    And yet I find I have to start Oracle when I am not connected to the LAN or the services will not start correctly. If this is a "feature" then hopefully someone will tell us and maybe give us a workaround or give us an idea if this will be addressed in a future release. Having said that and in fairness to the Oracle product; being a developer I have other products installed on my machine that have special networking setup needs also, and in my case this could be exasperating or even possibly causing this Oracle problem I am having. To be specific I have software for 2 different VPNs installed so I can tunnel into 2 private networks. One of these VPNs require me to make use of a DNS Suffix (as shown below) which might be contributing to my problems, not sure. I also have VMWare installed which uses it own network adapters when it is running, so you can see how things could get a little hairy... at any rate, there is my 2 cents worth (or is that 5 cents? : )
    fwiw,
    ADG13
    C:\Documents and Settings\Administrator>ipconfig/all
    Windows IP Configuration
    Host Name . . . . . . . . . . . . : IBM-6AB1330E158
    Primary Dns Suffix . . . . . . . :
    Node Type . . . . . . . . . . . . : Hybrid
    IP Routing Enabled. . . . . . . . : No
    WINS Proxy Enabled. . . . . . . . : No
    DNS Suffix Search List. . . . . . : ibm.com
    Ethernet adapter Local Area Connection 2:
    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : Microsoft Loopback Adapter
    Physical Address. . . . . . . . . : 02-00-4C-4F-4F-50
    Dhcp Enabled. . . . . . . . . . . : No
    IP Address. . . . . . . . . . . . : 192.168.110.250
    Subnet Mask . . . . . . . . . . . : 255.255.255.0
    Default Gateway . . . . . . . . . :
    Ethernet adapter Local Area Connection:
    Connection-specific DNS Suffix . : ibm.com
    Description . . . . . . . . . . . . . : Intel(R) PRO/1000 MT Mobile Connection
    Physical Address. . . . . . . . . : 00-11-25-13-96-AF
    Dhcp Enabled. . . . . . . . . . . : Yes
    Autoconfiguration Enabled . . . . : Yes
    IP Address. . . . . . . . . . . . : 192.168.1.102
    Subnet Mask . . . . . . . . . . . : 255.255.255.0
    Default Gateway . . . . . . . . . : 192.168.1.1
    DHCP Server . . . . . . . . . . . : 192.168.1.1
    DNS Servers . . . . . . . . . . . : 65.24.7.3
    Lease Obtained. . . . . . . . . . : Wednesday, January 11, 2006 3:40:08 AM
    Lease Expires . . . . . . . . . . : Thursday, January 12, 2006 3:40:08 AM
    Ethernet adapter AGN Virtual Network Adapter:
    Connection-specific DNS Suffix . : ibm.com
    Description . . . . . . . . . . . : AGN Virtual Network Adapter
    Physical Address. . . . . . . . . : 00-00-00-00-00-01
    Dhcp Enabled. . . . . . . . . . . : Yes
    Autoconfiguration Enabled . . . . : Yes
    IP Address. . . . . . . . . . . . : 9.49.217.159
    Subnet Mask . . . . . . . . . . . : 255.255.255.255
    Default Gateway . . . . . . . . . :
    DHCP Server . . . . . . . . . . . : 9.49.217.159
    DNS Servers . . . . . . . . . . . : 9.0.2.1
    9.0.3.1
    Lease Obtained. . . . . . . . . . : Wednesday, January 11, 2006 8:06:20 AM
    Lease Expires . . . . . . . . . . : Monday, January 18, 2038 10:14:07 PM

  • My logic board was replaced on my Mac and now my CS4 will not open. I re-downloaded it, gave the serial number, but it still won't open.  Now what?

    My logic board was replaced on my Mac and now my CS4 will not open. I re-downloaded it, gave the serial number, but it still won't open.  It said that the licensing had expired.  But this is not the case.  Now what?

    uninstall, clean (Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6) and then properly install (do not migrate, use timemachine etc) using the installation files.
    Downloadable installation files available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Maybe you are looking for