Dynamic change of Adapter Engine during transport

Hello All,
I am trying to understand the following, can some one explain me how and what changes are done to get this working.
so if you check both the images, in the Dev box (first image), we use central adapter engine and  after transport to Quality box the adapter engine is automatically changed to af.qpp.qppdb1.
I want to understand how and what config changes are done in order to get the new adapter engine name changed automatically. I tried to search some forums but all in vain.
Answers will be rewarded for sure.
Thanks in anticipation

hi karim,
As liad said ...
<b><i>In fact the adapter engine linked to the integration engine in our configuration is wrong.
Whetever we are trying to do through sxmb_adm it remain the same.</i></b>
If you are going to vhange the IE configuration ...It will not remain the same....
Execute the TCode SXMB_ADM  goto Integration Engine Configuration
you can modify your Configuration as per Requirement..
regards,
vasanth.

Similar Messages

  • BPC 10.0 NW - Change technical cube name during transport

    Hej gurus,
    One of our users have run a full optimization, and therefore the technical names of the cubes in DEV and PRD are no longer the same.
    We have looked at the SAP notes, and found the following.
    1689814 – “Stabilize InfoCube's technical name in the modeling process”
    We have made sure the note is on both DEV and PRD, and we have enabled "ENABLE_FIXED_CUBENAME" on all models. By doing this the notes states that:  "If the InfoCube technical names of the model are different between source and target system, the technical name of the InfoCube on target system would be changed to the same as the technical name of the InfoCube on source system."
    When I run the transport, the transport is succesfull, but the technical name has not changed.
    Therfore, I would like to know, if anybody have tried using this note and successfully changed the technical name? If yes, what did you exactly do? Did you transport everything for making it work? clear the database?
    I hope somebody can help us.
    Best regards,
    Mikkel Kristensen

    Hi Mikkel,
    Did you have any luck with this?  The only time I had any luck was changing the target structure (adding a dimension in the target), when the transport went through it changed the structure and reset the technical name to the source name.  It doesn't appear to work if the technical name is not due to be reset.
    Best,
    Chris

  • Want to Change Adapter Engine URL!

    Hi Experts,
    Currenly my Adapter Engine URL: http://<server>:8001/MessagingSystem/receive/AFW/XI
    I wan to change the Adapter Engine URL to: http://<server>:50100/MessagingSystem/receive/AFW/XI
    How can it be changed?
    Thanks,
    karthik

    Hi Nisar,
    Thanks for response.
    I executed a file to file scenario. There I got HTTP error with 404. When I tried to solve it, I found this difference in SXI_CACHE.
    In SXI_CACHE-> Goto-> Adapter Engine, an entire is present but with the URL having port 8001.
    I belive it has to be changed to 50100.
    Kindly help!

  • Change decentral to local adapter engine

    How can I change the adapter engine from decentral to local?
    Thanks
    Mikie

    In any communication channel, u ll find an option called "Adapter Engine".
    There u ll see options like Integration Server, Ur decentral adapter engine name
    Regards,
    Prateek

  • Sender File Adapter Not Showing in Decentral Adapter Engine

    Hi,
    We have recently implemented a Decentral Adapter Engine on a windows box. The adapter engine seems to be working fine because my adapters show and seem to work fine in it.
    However, when I define a Sender File Adapter that uses File Content Conversion message protocol instead of just File messaeg protocol, the adapter does not show up in the decentral adapter engine.
    I made sure that Adapter Engine parameter in the Sender File Adapter shows the new adapter engine but that does not seem to be working. If change the Adapter Enginer parameter to show the Central Adapter Engine, then I can see the Sender File Adapter on the Central Adapter engine and it works fine. (Note: The Central Adapter Engine is installed on a Unix box) 
    Here are the paramters I defined for the Sender File Adapter:
    - Transport Protocol: File System (NFS)
    - Message Protocol: File Content Conversion
    - Adapter Engine: (new Adapter Name)
    Source Directory: (
    server/drive/path)
    File Name: purchaseOrder.txt
    Quality of Service: Exactly Once
    Poll Interval (secs): 60000
    Poll Interval (msecs):
    Retry Interval (secs):
    Processing Mode: Archive
    Add Time Stamp (checked)
    Archive Direcotry: (
    server/drive/path/archive)
    Process Read-Only files: (not checked)
    Processing Sequence: By Name
    Fiel Type: Text
    File Encoding:
    Operating System Command:
    Additional Files (not checked)
    Content Conversion Parameters
    Document Name: MT_Request_File_Data
    Document Namespace: http://nxy.tots/fg_admin
    Document Offset:
    RecordSet Name: Purchasing
    RecordSet Namespace:
    RecordSet Structure: Purchase_Record,*
    RecordSet Sequence: Ascending
    RecordSets per Message: 1
    Key Field Name:
    Key Field Type: String(Case-Insensitive)
    Purchase_Record.fieldFixedLengths: 8,4,2,10,10,12,18,12
    Purchase_Record.fieldFixedType: char
    Purchase_Record.fieldNames: Request_Action,Request_PO_Num,Request_PO_LN,Request_PO_Date,Request_Purchasing_Org,Request_Purchasing_GName,Request_Created_By,Request_Vendor_Name
    Purchase_Record.fileContentFormatting: trim
    Adapter Status: Active
    Advanced Mode: (not checked)
    Your help is much appreciated.

    Hi Alaa,
    look into this document:
    http://service.sap.com/nw-howtoguides -> Exchange Infrastructure -> Troubleshooting: Adapter Engine 3.0 (Expert Call slides)
    If the File Adapter works without conversion, then you should count the number of fields in a row. If it differs from the configuration, then it runs on error.
    Another idea is to check the content type of the file. When you do not enter a File Encoding, then the file adapter assumes utf-8. If the file is for example latin-1, then the number of characters in a row are not counted correctly.
    Regards
    Stefan

  • Query on view cluster event trigger during transport

    Hi SAP Gurus,
    I would just like to ask if the subroutines set in events for view clusters would also get triggered upon transport.
    We had created a function module which is meant to regenerate a dynamic program when changes are made to a particular table.  We're planning to call this function module in a subroutine that is called during an event in the view cluster (set to "before saving the data to database").  However, we would also like for this dynamic program to be regenerated automatically once the table changes are transported to the test/prod systems.  Thus, I wondered if setting up the event is sufficient, and that it would also be triggered automatically prior to saving the changes to the database during transport, or if we still need to set up XPRA for this.
    Thanks!

    Some events are triggered when exportingthe changed data,
    - 10 After creating the change request header entries (E071)
    - 11 After changing a key entry in the change request (E071K)
    - 12 After changing the key entries in the change request (E071K)
    which are suitable to add a XPRA entry in the request
    But many events (AFAIK those without dialog) are triggered during import (and we can check if the program is called via transaction or import via flag VIM_IMPORT_MODE_ACTIVE, eg. do not execute a form which fill hidden fields like created by and created at.)
    Regards,
    Raymond

  • PI 7.0 Adapter Engine

    Hi,
    I'm installing and configuring SAP Netweaver 7.0 usage type PI. We are in High Availability environment: 2 nodes in HA for PI (node1 there is central instance and node 2 dialog instance) and 2 node in HA for Oracle DB. Now we have noticed that the adapter engines are NON Central Adapter Engine but we don't want this. We would Central Adapter Engine. How can I transform NON CENTRAL in CENTRAL ADAPTER ENGINE???

    Hi
    The Adapter Engine is a separate software component that is automatically installed on the Integration Server. In this case, it is the central Adapter Engine. However, you can also install the Adapter Engine separately on another host. This is then a non-central Adapter Engine.
    How you installed? Well non - central Adapter Engine all adapter behave standalone. I think you have to install again.
    Did you checked with the following
    1. HA guide
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/30f8bd90-0201-0010-dd9a-c8a7f52c47aa
    2. SAP Help
    http://help.sap.com/saphelp_nw04s/helpdata/en/8f/d906d01f77fa40a4c84683c3f8326f/content.htm
    3. SAP FAQ Note - 821268
    With this Did you tried changing the Adapter engine through exchange profile
    http://server:port/exchangeProfile/index.html
    Thanks
    Gaurav
    Edited by: Gaurav Bhargava on Oct 25, 2008 1:01 AM

  • Changing Exactly-Once-in-Order Processing in the Adapter Engine

    During some issues with hanging messages in some communication channels I noticed that messages for other receivers were also on hold. So adapter engine was processing all messages EOIO while Integration Server does that per receiver.
    I found the [solution in the SAP Help |http://help.sap.com/saphelp_nw04/helpdata/en/45/13b942f14d29efe10000000a114a6b/content.htm] but I am not able to access the mentioned link: http://<host><port>/MessagingSystem/migration.jsp
    Error message I got is: 404 not found.
    Looks like something changed! I checked some simular links like http://<host>:50000/MessagingSystem/monitor/monitor.jsp and that works fine.
    (I also checked the role SAP_XI_ADMINISTRATOR_J2EE was included in my userprofile)
    Please help me finding what I do wrong...or what has changed.

    Hi Sunil,
    ok, but do you know how what happened with the
    http://<host>:50000/MessagingSystem/migration.jsp
    I need that link to change the EOIO processing in the adapter engine.
    Regards,
    Michel

  • Long DDIC Activation for Master Data Change During Transport

    Good Morning Folks,
    During transport of a change to a custom master data object to production, the data dictionary activation is taking a very long time and using a very large amount of space. 
    The change to the master data object was adding three additional navigational attributes. This master data is not time-dependant.  The master data contains about 1.2 million records and has 49 active navigational attributes u2013 including the three new ones.  The Data Dictionary activation is executing report SAPLRSDU for more than 8 hours and is using upwards of 52GB of temp filespace (of 92GB allocated) during this time.  To the best of our knowledge, it looks as if it is trying to recreate or repopulate the /BIC/Pxxxx table of the master data.   It looks like it's reading billions of records (probably the same 1.2 m records over and over.)
    There are no errors in any logs that we can see. 
    Previous changes to this master data object have been successful, and reasonably fast.  And the transport of this change from Dev to our QA environment was very fast.
    We still need to get this change in, as well as additional changes that are dependant.  Why would this take so long, and is there anything we can do to get this to run faster?
    BTW:  We are on 3.5 (but looking forward to NW7.)
    Thanks, Brian

    Brian,
    Usually adding nav attributes would mean that the X and y tables get regenerated...
    Also do you notice reads only on the P-Table or other tables which have this object as well..?
    If it is only the P Table - try refreshing the stats for the same...

  • Change query dynamically in DB Adapter

    Hi,
    Please answer these questions.
    1. How to change query dynamically in DB Adapter?
    2. I have 2 db adapters, if i got error in 1 db adapter then how to rollback?
    Regards,
    kpr

    Hi,
    <div class="jive-quote">How to change query dynamically in DB Adapter?</div>
    Unfortunately there is no way to pass the query dynamically in DB Adapter. The reasoning behind that is that the DB adapter configuration wizard creates multiple assist files for each operation including the xsd which can not be created for any query dynamically.
    <div class="jive-quote">I have 2 db adapters, if i got error in 1 db adapter then how to rollback?</div>
    Either use XA datasources or throw a rollback fault in the catch block.
    Regards,
    Neeraj Sehgal

  • How to change connection port between INTEGRATION SERVER and Adapter Engine

    Hi,
    I have scenario that in the productions server we are using SAP web dispatcher to connect to Adapter Engine for example the port is 60000.
    So when we copy this server to DR environment the webdispatcher is not there. is that any way to change the all connection port between IS and Adapter from 60000 back to original port 50000 ?
    Please advise ?
    Thank You and Regards
    Fernand

    HI,
    The waiting status is because of Message Queue is in wiating status. This may be because of overload of the messages, or may be your receiver systems is not ready  etc.
    SO go to SMQ2 and check the status of the queues.
    Also have a look into this blog-
    /people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically
    <i>
    Why I can see this messages only in the integration server?</i>
    >>>If message reachs the Adapter engine, you can see in the Adapter monitor. In your case, message is still there in the Integration Engine. Once the queues are cleared it will reach the Adapter engine, so you can monitor it in the adapter engine
    Regards,
    Moorthy

  • How to change JNDI dynamically in DB adapter and FTP adapter

    Hi every one,
    Please any one explain "How to change JNDI dynamically in DB adapter and FTP adapter" with screen shots
    Thanks in advance

    YES, very much possible. Only with CRUD operation on a table is possible.
    Please refer the below URL, where you can see the multiple check box selected under "Perform an operation on a table" under Operation Type.
    http://docs.oracle.com/cd/E23943_01/integration.1111/e10231/adptr_db.htm#BDCGADFJ
    *7) Give points - it is good etiquette to reward an answerer points (5 - helpful; 10 - correct) for their post if they answer your question.*
    Going forward, please raise this as a separate thread. So that people will get benefited.
    Thanks,
    Vijay

  • PI/XI transport dynamic change of names - MESCLNT005 - MEQCLNT005 - MEP

    Hi,
    When transporting directory objects the auto generated channals GeneratedReceiverChannel_IDoc for sending idocs to from and to R/3 is normaly changed from MESCLNT005 -> MEQCLNT005 -> MEPCLNT005. But now when transporting a scenario this dynamic change is not done. What can be wrong?
    BR
    Claes

    Hi,
    The problem is that they are not renamed. They keep the MESCLNT005 eaven when it is transported to the quality system. But when transporting other scenarios it gets renamed from MESCLNT005 -> MEQCLNT005.
    Thank you for trying to help.
    BR
    /C

  • How can I change adapter engine from Non central to central

    My adapter engine is assigned as non central. However I want to have the adapter engine as part of the integration server.
    If I look in the RWB, the adapter engine listed under the non central adpater engine. However I would like to move it under the Integration server Engine.
    Can this be done or do I have to reinstall XI to get the adapter engine grouped with the IS.
    Currenty componenets under the domain I have:
    1) Integration which has Integration Engine, busines  process engine and Mapping runtime.
    2) Integration engine are blank, nothing underneath
    3) non central adapter engine
       my adapter engine here
    4) j2se adpater nothing underneath
    4) Tools
    So what I want to do is move the Non central adapter engine to be underneath the Integration Server.
    Any ideas how to do this....withoout a reinstall?
    Thanks
    Mikie

    HI,
    Have a look into Configuration Guide-
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ac6de690-0201-0010-54ac-8923089dcc97
    Regards,
    Moorthy

  • Webinar:SAP NetWeaver Process Integration u2013 Advanced Adapter Engine in PI 7

    +Please Note: This webinar is aimed at consultants, Patners and Customers in APJ Region and is scheduled at  2.00 - 3.00 p.m. Singapore Time (UTC +8)+
    Dear valued SAP Experts,
    Next SAP Intelligence Platform & NetWeaver RIG Expert Call Session will take place on Tuesday, September 1. The SAP Intelligence Platform & NetWeaver RIG Expert Call Sessions are designed to support consultants, partners and customers during their implementation projects. The sessions cover all different aspects of SAP NetWeaver and are aimed at experts, thus provide knowledge which is not available via standard training courses. The session duration is typically 60min and includes questions and answers.
    Tuesday, September 1, 2009:
    SAP NetWeaver Process Integration u2013 Advanced Adapter Engine in PI 7.1 EHP1
    Time: 2.00 - 3.00 p.m. Singapore Time (UTC +8)
    This event will feature Charu Goel with the SAP Intelligence Platform & NetWeaver Regional Implementation Group. Charu provides the following abstract:
    With PI 7.1 Enhancement pack 1, we continuously thrive to bring in advancements in AAE. In this APJ expert call, we talk about the much awaited capability of IDOC packaging along with the enhancements in JMS. You will learn about the interaction between the AAE and ABAP stack, new enhancements on the JDBC adapter and overall improvements in the technical adapters available with PI 7.1 EHP1.
    For meeting and Dial-in detail please register [here|http://www.surveymonkey.com/s.aspx?sm=qkBfQCM5FM_2f_2b4O0ihVpFRw_3d_3d]
    Thanks & Best Regards,
    Sarma Sishta

    Hi,
    This was one of the good session...
    Especially the features such as;
    -- TCP/IP connection control with JMS adapters
    -- Empty file Handling
    -- Set the various Attributes for Mail attachments via dynamic configuration (intially only subject line was possible)
    -- Message Prioritization
    -- single IDOC Ack for IDOC Packaging
    -- IDOC packaging
    -- and many more........................
    Even the future indicatioon of IDOC J2EE based adapter will provide new direction to the existion IDOC related scenarios..
    One thing that was changed in IDOC packaging is to control it via Sender Communication channel...intially we were doing it either via ECC system or with t-code "idxpw"
    Its almost in same way...but from J2EE based adapter perceptive IDOC packaging will be available with Java stack...and will no need to depend only ABAp stack for this feature.
    Thanks
    Swarup

Maybe you are looking for