Dynamic code generation by system in place of Z program when listcube

Hi Experts,
in process chain there is one step attached ABAP program with variant to create a file from 3 cubes and sent it to some other server. one day it was not created any file and did not send to the respective server.
then i opened the process chain in display mode and opened ABAP program in display mode, by double clicking on one cube i was tried to get the data but the program was changed dynamically in place of original customized program. the report name was 'RSDQ_VIEW_REPORT'.
please let me know how it was changed the code dynamically?.

Similar Messages

Need help with dynamic code generation

Hi Folks,
I am trying to dynamically create and execute the following query
Environment: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0
DECLARE
A NUMBER;
stmt VARCHAR2(200);
 4
 5 CURSOR C1 IS
 6 SELECT TABLE_NAME
 7 FROM DB_MGMT.CTRL_TAB_RETENTION
 8 WHERE RETENTION_PERIOD_IN_MONTHS = 11
 9 AND rownum < 2;
 10
 11 BEGIN
 12 FOR i IN C1
 13 LOOP
 14
 15 -- dbms_output.put_line('Table Name: ' || i.TABLE_NAME);
 16
 17 -- dbms_output.put_line('SELECT min(DT_SKEY), max(DT_SKEY) FROM '||i.TABLE_NAME||' ;');
 18
 19 stmt :='SELECT min(DT_SKEY), max(DT_SKEY) FROM DWH_RSRC_PERF.'||i.TABLE_NAME||';';
 20
 21 dbms_output.put_line(stmt);
 22
 23 execute immediate stmt;
 24 END LOOP;
 25 END;
 26 /I get the following error message
SQL> @sanity_check
SELECT min(DT_SKEY), max(DT_SKEY) FROM DWH_RSRC_PERF.FACT_NOK_CELL_SERVICE2_HH;
DECLARE
ERROR at line 1:
ORA-00911: invalid character
ORA-06512: at line 23Can anybody spot any obvious syntax errors in the above code?
Thanks in advance
rogers42

rogers42 wrote:
Hi,
Thanks for the suggestion.
While getting rid of the ";" helps, but the output of the select statement is not displayed?When you do a SELECT statement in PL/SQL, you have to select the results into variables or arrays.
Try something like this:
DECLARE
 CURSOR C1 IS
 SELECT TABLE_NAME
 FROM DB_MGMT.CTRL_TAB_RETENTION
 WHERE RETENTION_PERIOD_IN_MONTHS = 11
 AND rownum < 2;
 min_dt_skey NUMBER;
 max_dt_skey NUMBER;
 stmt VARCHAR2 (100);
BEGIN
 FOR i IN C1
 LOOP
 -- dbms_output.put_line('Table Name: ' || i.TABLE_NAME);
 stmt :='SELECT min(DT_SKEY), max(DT_SKEY) FROM DWH_RSRC_PERF.' || i.TABLE_NAME;
 dbms_output.put_line(stmt);
 EXECUTE IMMEDIATE stmt
 INTO min_dt_skey, max_dt_skey;
 dbms_output.put_line ( min_dt_skey || ' = MIN (dt_skey), '
 || max_dt_skey || ' = MAX (dt_skey) for table '
 || i.table_name
 END LOOP;
END;

Hibernate + Middlegen + Code generation

I use Hibernate and Middlegen for working with Oralce database. Middlegen generated java classes successfully. But I want to add some new methods and attributes to it. Can I specified that modification and apply it every time when I regenerate classes?
For example: it generates class A:
public class A {
private BigDecimal xmlFile;
public A() {};
and i want to generate class as
public class A {
BigDecimal xmlFile;
// new property that is not mapped on the database.
int new_prop;
public A() {
// read data from file and specify new_prop.
new_prop = 2;
}

I think Code Generation has it's place, and that place is pretty narrowly defined. I don't mind using a tool to generate boilerplate code that I already understand, but don't care to write. I don't mind asking my editor to generate get/set methods for me. I don't care if I never write another ejb-jar.xml. But I think it negatively effects your ability to write solid code when your understanding of what you're doing ends at the XDoclet tag.

FPGA Code Generation fails with error codes 7 and -1

Hi all,
I have been having a weird issue with my LV FPGA compilation in the last couple of days, no matter what I try to compile LV fails to generate the FPGA code files and returns with errors 7 and -1 and complains that the file is not found. This happens no matter what I am trying to compile even a VI with just a while loop. I followed the discussion forum here without any luck, also followed the NI article here and that did not help either. The error codes always get generated at the start of the Generating Intermediate files step #7 (out of 7).
Attached to this post is a screenshot of the error I am getting (error -1 just says internal error and to contact NI support), bellow is basically the error I get for error code 7
An internal software error has occurred. Please contact National Instruments technical support at ni.com/support with the following information:
Error 7 occurred at Read from Text File in nirviGetInstantiation_cRIO-IDSel_Timer.vi->nirviGetInstantiation_cRIO-IDSel_Timer.vi.ProxyCaller
Possible reason(s):
LabVIEW: File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, use \ as path separators on Windows, : on Mac OS X, and / on Linux. Verify that the path is correct using the command prompt or file explorer.
=========================
NI-488: Nonexistent GPIB interface.
C:\NIFPGA\compilation\cRioController_8-SlotFPGA_FPGA-TriggerTest_C06156E2\IDSel_Timer.vhd
I tried to do some digging to see what could possibly be happening, and I noticed that LV is looking for the vhdl files in the wrong folder (see the line highlighted in red above), when generating the vhdl files, LV will place them inside the "source_files" folder under the compilation project, but for some reason it is trying to find them under the root folder not inside the source_files folder!!!
Does anyone have any idea why LV would be looking for these files in the wrong subfolder?
Thank you,
Aws
Attachments:
Code Generation Errors.png ‏35 KB

Hi Aws_Khudhair,
What version of LabVIEW are you using? And what version of the FPGA module? From what I found, it seems as though this is primarily an issue with LabVIEW 8.6 and 8.6.1.
http://digital.ni.com/public.nsf/allkb/A711119FE89E39E78625754E00075E92
This forum also discusses a similar issue:
http://forums.ni.com/t5/Real-Time-Measurement-and/FPGA-compile-errors-after-generating-intemediate-f...
It may also be worth repairing/reinstalling the FPGA Module and the Xilinx compile tools.
Catherine B.
Applications Engineer
National Instruments

Create dynamic code on a JSF with ADF Faces

Hi,
the next is just sample, nothing to production system, but if I can do the sample I can do something to production system.
Fine.
let's suppose that I want to create a html link
in run-time over a JSF page with ADF Faces component.
I can do that, I did using javascript and Custom tag,
but the html link is placed out of the body of the page instead of put it over the place that I put it in development-time
so, now my question is:
how I can generate dynamic code using ADF FACES component commandButton or any others.
any suggestion??
P.D. if you need more info ask me.

Hello Jeanne.
You are right, I used <f:verbatim> element to wrap all my non-JSF elements and it work. :)
so good so far.
but, dynamic code mean generate code in this case HTML in run-time.
That is to say: write code HTML just in time I invoke a page.
That is posible through Custom Tags.
You create a Custom Tags this tag generate HTML code after to process any Business Logic. then you put the tag in the page that you want to use it
someting like this:
<afh:rowLayout halign="center">
<afh:cellFormat halign="center">
<ESE-utilities:populateMenu/>
</afh:cellFormat>
</afh:rowLayout>
the just above bold line is my Custom Tag that generate HTML code
and not work.
but, if I replace the tag directly using HTML code in the page, for example:
<afh:rowLayout halign="center">
<afh:cellFormat halign="center">
<f:verbatim>
prueba
</f:verbatim>
</afh:cellFormat>
</afh:rowLayout>
it work
so, now my new question is:
Â¿How can I use a Custom Tagthat generate HTML code, and that code have been written inside of my body page?
Thanks in advantage for your reply.
Mauricio

Error during distribution for compiled code generation-Reply

Hi,
Looking at your error messages, it looks as though your build is failing during the code generation phase of an autocompilation. To determine why the code generator crashed, either look in the $FORTE_ROOT/log/forte_ex*.log files or don't use autocompilation and use fcompile.
There are many reasons why the code generator could crash. Some of the things I've come across are running out of memory and trying to find invalid classes.
If its the invalid class problem you'll find a message like:
Generating code for partition BLTCustomWindow_cl0_Part1.
ERROR: Exiting due to following exception:
SYSTEM ERROR: Client partition FTCompile_cl0_Client was terminated by escaped
exception. See the remainder of the error stack for more information.
Class: qqsp_ResourceException
Error #: [1001, 3]
Detected at: qqrt_ForteExecAgent::LoadPartition at 1
Error Time: Tue Aug 18 17:52:44
Exception occurred (locally) on partition "Forte_Executor", (partitionId =
9EA25A00-36FE-11D2-87C4-502F15BEAA77:0x1, taskId =
[9EA25A00-36FE-11D2-87C4-502F15BEAA77:0x1.6]) in application
"FTCompile_cl0", pid 28331 on node stardev in environment <unknown>.
FATAL ERROR: Invalid class ProductBMServices.ProductSecurityMgrProxy
(0x4ecd,0x19a)
Class: qqsp_ImplementationException
Detected at: qqcg_TRclass::SetClass at 2
Last TOOL statement: method ForteCompiler.ProcessPGF
Error Time: Tue Aug 18 17:52:44
Exception occurred (locally) on partition "Forte_Executor",
(partitionId = 9EA25A00-36FE-11D2-87C4-502F15BEAA77:0x1, taskId =
[9EA25A00-36FE-11D2-87C4-502F15BEAA77:0x1.6]) in application
"FTCompile_cl0", pid 28331 on node stardev in environment <unknown>.
The solution for this instance is to clean up the invalid classes using the c4tstdrv utility.
c4tstdrv > setrepos star8
c4tstdrv > setwork dmcompiledbuild
c4tstdrv > open
Type Service Flags Level
err sh * 255
trc rp 1 4
c4tstdrv > findproj productbmservices
c4tstdrv > cleanuprtclasses
Removing extraneous RTclass ProductShootingLocationMgrProxy
Removing extraneous RTclass PRTerritoryBaseMgrProxy
Removing extraneous RTclass PRTerritoryMgrProxy
Removing extraneous RTclass TalentBaseMgrProxy
Removing extraneous RTclass TalentTypeMgrProxy
Removing extraneous RTclass TitleTypeBaseMgrProxy
Removing extraneous RTclass TitleTypeMgrProxy
Removing extraneous RTclass ProductSecurityBaseClass
Removing extraneous RTclass ProductSecurityBaseQuery
Removing extraneous RTclass ProductSecurityQuery
Removing extraneous RTclass ProductSecurityMgrProxy
c4tstdrv > commit
c4tstdrv > exit
Integrate the changes to the workspace, start the build again and this should have cured the problem.
However, its hard to know what the cause of your problem is without seeing the output in the log files.
Good luck.
Mark Carruthers
20th Century Fox
"Forte Consultants" <[email protected]> 01/22/99 08:35am >>>
Hi,
I'm doing application distribution for my application using a fscript
script and am forcing compilation on 2 of my partitions.
This I have been doing from quite sometime successfully. Recently I
developed a new service and plugged it into my application for
deployment.
I'm successfully able to distribute & deploy the interpreted code. But
I'm getting a long list of system errors when I try doing distribution
for compiled code. And I see only one of the .exe generated instead of
two because of which I'm unable to go ahead with installaion. I would
appreciate if anybody let me know why this's happening ?. The following
is the main chunk of this error list.
Thanks in advance.
--Anand Ramaswamy
SYSTEM ERROR: Cannot resolve the distributed reference for an object of
class
(qqlo_Object) named (<Unknown>) for the reasons below.
Class: qqsp_DistAccessException
Error #: [601, 144]
Detected at: qqdo_ProxyMgr::ResolveOutGoingProxy at 10
Error Time: Fri Jan 22 10:44:22
Exception occurred (locally) on partition "Fscript_cl9_Client",
(partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
"fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
SYSTEM ERROR: Can not initially communicate with the object named
(Unnamed),
which is supposed to be in partition
(32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x616:0x1).
Class: qqsp_DistAccessException
Error #: [601, 140]
Detected at: qqdo_ProxyMgr::CheckAccess at 1
Error Time: Fri Jan 22 10:44:22
Exception occurred (locally) on partition "Fscript_cl9_Client",
(partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
"fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
SYSTEM ERROR: Attempt to send to unknown destination partition
(32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x616:0x1).
Class: qqsp_DistAccessException
Error #: [601, 102]
Detected at: qqdo_PartitionMgr::SendMsg at 1
Error Time: Fri Jan 22 10:44:22
Distributed method called: qqdo_InternalMessage.<Message> (object
name
Unnamed) from partition "CodeGenerationSvc_cl0_Part1-router",
(partitionId
= 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615.2]) in application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV
Exception occurred (locally) on partition "Fscript_cl9_Client",
(partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
"fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
SYSTEM ERROR: Partition (32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x616:0x1)
no
longer exists. The process associated with the partition probably
terminated.
Class: qqsp_DistAccessException
Detected at: qqdo_PartitionMgr::CheckStarted at 1
Error Time: Fri Jan 22 10:44:22
Exception occurred (locally) on partition "Fscript_cl9_Client",
(partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
"fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
SYSTEM ERROR: This method invocation is being retried because the
failures
shown below and the fact that the dialog duration is MESSAGE. This is
try #2.
Class: qqsp_DistAccessException
Error #: [601, 54]
Detected at: qqdo_Message::Failed at 1
Error Time: Fri Jan 22 10:44:19
Exception occurred (locally) on partition "Fscript_cl9_Client",
(partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
"fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
SYSTEM ERROR: The load balanced router is disabled or has no members.
This
can happen if all of the members terminated or failed.
Class: qqsp_DistAccessException
Error #: [601, 161]
Detected at: qqdo_LbRouter::Route at 1
Error Time: Fri Jan 22 10:44:19
Distributed method called: GenerationMgrProxy.GeneratePartitionCode
(object name
site/codegenerationsvc_cl0/codegenerationsvc_cl0-codegensvc)
from partition "Fscript_cl9_Client", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614.2]) in application
"fscript",
pid 4b81 on node MOOSUP in environment IGTSDENV
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
SYSTEM ERROR: This method invocation is being retried because the
failures
shown below and the fact that the dialog duration is MESSAGE. This is
try #1.
Class: qqsp_DistAccessException
Error #: [601, 54]
Detected at: qqdo_Message::Failed at 1
Error Time: Fri Jan 22 10:44:15
Exception occurred (locally) on partition "Fscript_cl9_Client",
(partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
"fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
SYSTEM ERROR: Access to a load balanced router member (which is a
service
object) failed for the reasons below.
Class: qqsp_DistAccessException
Error #: [601, 162]
Detected at: qqdo_LbRouter::Route at 2
Error Time: Fri Jan 22 10:44:15
Distributed method called: GenerationMgrProxy.GeneratePartitionCode
(object name
site/codegenerationsvc_cl0/codegenerationsvc_cl0-codegensvc)
from partition "Fscript_cl9_Client", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614.3]) in application
"fscript",
pid 4b81 on node MOOSUP in environment IGTSDENV
Distributed method called: qqlo_Object.<Message> (object name
Unnamed)
from partition "Forte_Executor", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615.12]) in application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
SYSTEM ERROR: Cannot resolve the distributed reference for an object of
class
(qqlo_Object) named (<Unknown>) for the reasons below.
Class: qqsp_DistAccessException
Error #: [601, 144]
Detected at: qqdo_ProxyMgr::ResolveOutGoingProxy at 10
Error Time: Fri Jan 22 10:44:15
Distributed method called: qqlo_Object.<Message> (object name
Unnamed)
from partition "Forte_Executor", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615.12]) in application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
SYSTEM ERROR: This distributed reference was previously invalidated due
to the
reasons below.
Class: qqsp_DistAccessException
Error #: [601, 132]
Detected at: qqdo_ProxyMgr::ResolveOutGoingProxy at 3
Error Time: Fri Jan 22 10:44:15
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
INFORMATION: The connection to the partner was terminated by the
Communication
Manager for the reasons below.
Class: qqsp_DistAccessException
Detected at: qqdo_PartitionMgr::StopLocation at 1
Error Time: Fri Jan 22 10:44:15
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
INFORMATION: Network partner closed connection. This usually means the
process at the other end of the wire failed. Please go look there and
find
out why.
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 2
Error Time: Fri Jan 22 10:44:15
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
INFORMATION: Asynchronous Failure: Recieved a close from the network
partner:
Internet Location - Host: moosup.iroquois.com Port Number: 2504 Dot:
193.1.11.26 %LINKDISCON, network partner disconnected logical link
Event 4
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 1
Error Time: Fri Jan 22 10:44:15
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
SYSTEM ERROR: This method invocation is being retried because the
failures
shown below and the fact that the dialog duration is MESSAGE. This is
try #1.
Class: qqsp_DistAccessException
Error #: [601, 54]
Detected at: qqdo_Message::Failed at 1
Error Time: Fri Jan 22 10:44:15
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
INFORMATION: The connection to the partner was terminated by the
Communication
Manager for the reasons below.
Class: qqsp_DistAccessException
Detected at: qqdo_PartitionMgr::StopLocation at 1
Error Time: Fri Jan 22 10:44:15
Distributed method called: qqlo_Object.<Message> (object name
Unnamed)
from partition "Forte_Executor", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615.12]) in application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
INFORMATION: Network partner closed connection. This usually means the
process at the other end of the wire failed. Please go look there and
find
out why.
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 2
Error Time: Fri Jan 22 10:44:15
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
INFORMATION: Asynchronous Failure: Recieved a close from the network
partner:
Internet Location - Host: moosup.iroquois.com Port Number: 2504 Dot:
193.1.11.26 %LINKDISCON, network partner disconnected logical link
Event 4
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 1
Error Time: Fri Jan 22 10:44:15
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Hi,
If this INCLUDE is in a function group go the MAIN program and activate from there.
Can you list out the include name?
a®

ABAP to XML Transformation Dynamic Element Generation

Hi all,
I have created a deep structure and used simple transformation in XSLT Tool to create XML file. But I would like to generate some elements dynamically. Desired XML output is in the attachments.
There is a way to do that if had used XSLT Program instead of simple transformation (dynamic xml nodes using xslt - Stack Overflow) but XSLT Program does not create fields from structures automatically like simple transformation.
So, is there any way to do that using simple transformation ?
Thanks.

The error is related to your web browser software or release, because it can't support utf-16 xml file (for example, IE 6 doesn't support it).
Your output file contains <?xml version="1.0" encoding="utf-16"?> in your ECC 6 system because your SAP system is Unicode, and you used a variable of character type behind RESULT XML. When it's character, SAP converts the XML into SAP code page. If you use a byte type behind RESULT XML, SAP doesn't convert, and you'll get the XML data in the encoding of the transformation (defined here: <xsl:output encoding="ISO-8859-1" ...).
I guess you have choosen ISO-8859-1 because your 4.7 system issued a file with that encoding.
So, the only thing you have to do, in the call transformation statement, is to store the result into a table of X255 (instead of table of CHAR2048).
Edited by: Sandra Rossi on Jul 6, 2010 4:14 PM CET:
You must also download using filetype = 'BIN'

NI Motion Assistant LabVIEW Code Generation Error

Hello, the following is my current setup:
NI PCI-7334 motion control board
NI UMI 7774 splitter board
3 x NI P70530 Drives
3 x NI CTP12ELF10MAA00 Stepper Motors
3 x Power supply units for drives
LabVIEW 2010
NI Motion Assistant 2.6
Motion and Automation Explorer 4.7
I have built a three axis motion system that I am trying to configure with labview. After verifying that everything was set up correctly, I opened MAX, updated the firmware to my motion control board, and intitialized the controller. Since then, I have created many basic programs using the Motion Assistant Software to test the movement of my device. Everything works fine while using the Motion Assistant software (I have three axis movement, multidirectional control, and can perform various straight line and arc moves). My problems begin when I try to use the code generation feature.
When trying to use the code generation feature to output a labview diagram, I run into a problem where a dialog box pops up and says "Find the vi named ...."
Some examples of the names that come up are: Configure Vector Space.flx, Vector Space To Control.flx, Motion Error Handler.flx.
To be clear the program in Motion Assistant that I am trying to export to LabVIEW code is composed of two individual steps. One that tells X,Y, and Z motors to move forward 25 revolutions, and one step that tells them to move backwards 25 revolutions.
I have made many other programs in Motion Assistant that run fine, but I always receive similar errors when trying to use the code generation feature to export to LabVIEW. Is there something that I can do to solve my problem?
Thank you for your help.

Hi Joe,
I am using Ni-Motion Assistant 2.6, Ni-Motion 8.1, and Motion and Automated Explorer version 4.7.
The code I posted is supposed to tell Axis 1 to move 40 revolutions at 400 rpm. It works fine in Ni-Motion Assistant but when I try to generate a LabVIEW diagram I receive the following error, "Find the VI named 'Motion Error Handler.flx'". I have had it search my directory, as well as the disk that I installed both LabVIEW and Ni-Motion but no luck. Thanks for your help.
Attachments:
1111.vi ‏9 KB
1 axis movement.zip ‏8 KB

Code generation from use cases

I have to build a system that inputs use cases and outputs code. I am as yet unsure how to do this. I assume the easiest way would be to go via class diagrams because code generation seems not a huge leap from there, but how would you suggest I get from the text use cases to a class diagram? Any help and pointers would be very very welcome.
Cheers,
Nicholas

If you invent this, they will have to create a new Nobel prize for computing. And we as developers will all be out of business. Best of luck.
- Saish

Code Generation Bug in Forms 10g

We're hitting this goofy bug in Forms 10g (also occurs in 9i) code generation of the On-xxx triggers. I have an "obj" package that declares an index-by array type that's used by multiple packages, including a "qry" package and "dml" package (in good ol' Steven Feuerstein tradition). The On-xxx triggers pass this type into packaged procedures that perform the Insert, Update, Delete and Lock required by Forms. These DML routines are in the "dml" package.
When we look at the generated trigger code, we see that the index-by array type is incorrectly referenced as dml.obj.idx. That is, since the On-xxx trigger is calling DML routines in the "dml" package, it's improperly qualifying the reference with the dml package name. The On-xxx trigger code gets regenerated every time we do Compile Module. We tried doing Compile All, which doesn't regenerate the On-xxx triggers; but neither does it produce an fmx file.
Is this a known bug, and is there a workaround? I can't move the index-by array type declaration to the dml package because it's used by multiple packages. If I fix it in one place, I break it in another. I can't have multiple declarations of this type in multiple packages either, because I'm passing it around between the packages, and they're not type-compatible at that point.

It looks like the Forms Wizard is the real culprit. When we looked at the Property Palette for each On-xxx trigger, where the target procedure is specified, along with the parameters, is where the malformed dml.obj.ref code appears. Once we edited those entries, the On-xxx triggers generated correctly.

Automatic Code generation from UML for C++ in Visual Studio 2013 Ultimate

Hi all,
I am using Visual Studio 2013 Ultimate to design UML diagrams and want to use the class diagram to generate C++ code,
however I found that there seems only support C# generation.
Is there any way to do the code generation (even round-trip engineering with C++/UML model) from Visual Studio 2013 Ultimate?
There is a way to do C++ code generation by customize the text template file right? but it is time consuming and we don't have much time to do it.:(
Thanks a lot!

Hello Grib,
>>is there anyway to integrate an STE code generator to Visual Studio 2013. I know there is EF5.x STE Generator but only for VS 2012.
Yes, you can.
Since the STEs are T4 template and you can just take template and code any changes or improvements you require yourselves! As you mentions, there is a EF5.x STE generator, you could download it and edit it. You could check this article:
Upgrading to EF6, we could see that from EF5 to EF6, the team moves classes to a new namespace, so we need to modify the T4 template to generate the new namespace.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Windows Server Essentials 2012 error code: 2147942403 The system cannot find the path specified

Running Windows Server 2012 Essentials with an external usb 3 drive as a backup device. Using a Vantec hx enclosure with a WD Red drive. Last night the Dashboard saw the drive with about half the 4TB available for backup. A.M., I get "error code:
2147942403 The system cannot find the path specified".
Going to the server desktop, I see a message indicating that the usb device malfunctioned. unplugging it, and plugging it back in, I now have it available via the dashboard.
This has happened a couple times with two different drives in Vantec hx enclosures.
A couple possibilities come to mind:
the enclosures may both be bad...
there is some problem with the system software and external usb drive.
Thoughts?
Suggestions for external enclosures?
Thanks!

Hi,
According to your description, my understanding is that you cannot backup the Windows Server Essentials 2012 and got "error code: 2147942403 The system cannot find the path specified". You found the usb device malfunctioned.
Can you backup the server when you unplugged the usb device, and plugged it back in? If you can backup the server when you replug the usb device, you need to engage the vendor to resolve the hard drive issues.
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

ALE configuration, Assign Company Code to Cross-System Company

Hello all,
I set up and configured ALE so that we can keep our production, QA, development master data in sync. I activated the change pointers for the particular message type for which we want to create IDOCs when new master data is created, or existing master data is changed. IDOCs are then sent to the QA and development systems.
Are these three ALE configurations associated with anything outside of ALE? Is there any area that can or will be affected by these three configuration settings?
Transaction SALE
Cross-System Company Codes
 - all Company codes in our system
Assign Cross-System Company Code to Chart of Accounts
 - all Company codes are associated with the one chart of accounts
Assign Company Code to Cross-System Company
- global company code is the same as the company code
Thanks
Bruce

In T.Code: OX19 - Assign company code to controlling area
Please check that if for ur Controlling Area, the
Currency Type:
Currency:
Currency Type
10 Company code currency
20 Controlling area currency
30 Group currency
40 Hard currency
50 Index-based currency
60 Global company currency
Currency
required code of Currency
Should/Are properly maintained in OX19.
This type of error will be for this stage itself.
Provide points if satisfied
Regards
Dinakar
SAP will be throwing this type of messages when
Differing currencies: USD - CAD
Message no. KT276
Diagnosis
The system makes consistency checks during assignment of a company code to a controlling area as part of assignment control.
The same checks take place if assignments already exist and you change the basic data in the controlling area, or if you define the controlling area and company code as a 1:1 structure.
If the check finds an error, the system cannot execute the function ("Assign" or"Change basic data"). If you do not maintain the required data for the consistency check (such as currency, chart of accounts, or fiscal year variant in the company code), this also results in an error message.
You want to use currency type USD. The SAP System determined the company codes assigned to controlling area CAD and the relevant currencies. One discrepancy occurred in one of the currencies.
Note
A precondition for currency type "10" is that all company codes assigned to the controlling area must use the same currency.
A precondition for currency types "40" and "50" is that all company codes assigned to the controlling area must belong to the same country or use the same hard currency or index-based currency.
A precondition for currency type "60" is that all company codes must belong to the same company or all the companies must use the same currency.
Procedure
Change the currency type or the currency settings.

'Unallowed tags or dynamic code' error on a page without these...

Hi,
I've been using InContext Editing for a few sites now and my clients have been very happy with it, but I have a new site that's having problems on just one page.
http://www.windhampilates.com/index.php
I've enabled ICE on the text areas below the main photo and nav bar, as I have on other pages. There are a few scripts running on this page, but the only difference on this page from the rest of the site is the rotating image at the top of the page.
Ironically, I've used this same script on previous sites where I've used ICE and they've worked without any problems. Am I missing something?
Really and truly appreciate your help!
- MaryAnn

I can login, and try to edit, but the system won't save my changes and gives me the 'unallowed tags or dynamic code' error as the reason why it can't save the changes.
I tried removing the jquery in the header, but that didn't seem to work:
http://www.windhampilates.com/index-testjqueryerror.php
I still can't get the edits to save and it's still giving me the same message.
The only other non-static elements on the page are the newsletter subscription script and the Facebook link, but I have these on other pages and we can edit those pages without issue.
Any other ideas?
Thanks for your help!

NI Veristand 2014 doesn't appear in MATLAB R2014a Code generation

Hi
I installed NI Veristand 2014 after installing MATLAB R2014a. I restarted my PC and tried to apply the sinewave example. I looked at code generation in Simulink model configuration parameters but couldn't find the NIVeristand option as illustrated in video. Here is a screenshot of system target file:
Did I miss installing something? That was my installation (since I need Veristand to compile MATLAB model):
Thanks for your assistance in advance
Waleed El-Badry MSc.,MCPD, ISTQB Certified Tester
Assistant Lecturer
Mechatronics Department
Faculty of Engineering
Misr University for Science & Technology
Solved!
Go to Solution.

Hi Waleed,
Unfortunately the behavior your are experiencing is a fault in our installer's auto-detection of MATLAB R2014a. The NI VeriStand 2014 node you see in the installer setup window is actually hiding several other unique options. The default selections should auto-select MATLAB support if MATLAB was successfully detected by our installer, unfortunately this procedure has failed.
To workaround this:
1. Relaunch the installer setup window
2. In the Features setup window (your second picture), left click on the image next to the NI VeriStand 2014 label
3. You should now be presented with the option, Install with customization - select this option.
4. Proceed with the installation, eventually you be presented with custom options for the VeriStand product.
5. In the VeriStand feature list, select the NI VeriStand 2014 Model Framework option
6. Proceed with the installation.
After this, restart MATLAB and then relaunch. If the installation was successful, on relaunch of the MATLAB COmmand Window will print the string Initializing NI VeriStnad 2014. Please note that we've documented this issue and are making an effort to address it.
Nestor

Dynamic code generation by system in place of Z program when listcube

Similar Messages

Maybe you are looking for