Dynamic Filename in Sel screen for Payment Medium Creation program SAPFPAYM

Hi,
We have a requirement to provide the dyanamic filename on the selection screen of payment medium program SAPFPAYM. The filename should contain the concatenation of date and time stamp.
For eg. it should be something like CLIENTNAME.ACH.PY<YYMMDDHHSS>.TXT.
Do we need to write the code in any of the custom event in the transaction OBPM3 to acheive this requirement OR Can anyone of you suggest me an alternate way to acheive this dyamic filename selection functionality.
Thanks!
Rupesh

Thanks Henri
I have used the same method to implement this. I have awarded you point for this as well.
Thanks,
Rupesh

Similar Messages

Standard form for payment order creation

Hi,
I got a requiremnt to create a form for payment order creation,
can one plzzz guide me, do v hav any standard form available in sap, n also let me know the program for it.
Regards
ashwini

Hi Aswini,
FPY1_CH_DTA_EZAG
FPY1_CH_DTA_LSV
FPY1_DE_DTA
FPY1_DE_DTA
FPY1_DE_DTAZV
FPY1_DE_DTA_ZZV
FPY1_DE_DTA_ZZV
FPY1_DE_EURO
FPY1_DE_EURO
FPY1_FR_BANQUE
FPY1_NL_DTA
FPY1_NL_DTA
FPY1_NZ_MTS
FPY1_NZ_MTS
check these forms
Regards,
Venkat

Custom screen for Payment card information in Sales Order

Hi All,
I want to know if its possible to develop a custom screen to accept multiple payment card information in Additional data tab and save it in normal payment card information at the time of saving sales order. This sounds little
Nilesh

Hi Nilesh,
Please, see SAP Note 914603 - FAQ/Collective note for payment cards (Consulting/modif). Here you have the relevant notes related with this topic, so, in point 4, the note says:
4. Payment cards in the order (with billing plan)
- 914811 FAQ: Authorisation Problems - Why?
- 915193 No authorization in the order
- 313416 Installment plan payment with payment cards
- 361790 No Authorization or only pre-authorization executed
- 701569 Incorrect value to be authorized in the order
I hope this helps you
Regards
Eduardo

Duplicate Payment Medium Creation

Hi All,
We are using Payment Medium workbench format ACH forone of the payment methods. When we do payment run F110 with this payment method, we are seeing a check box "Create Payment Medium" even during payment proposal run. If a user is checking this box during payment proposal it creates a payment medium file.
Note: this check box is there even when I am not entrying print-variant.
Hence, we run the risk of creating payment medium twice, once during payment proposal and second time during a payment run. Is there a way, we can suppress this check box "Create payment Medium" during payment proposal .
Thanks
Ron
Edited by: Ron on Jan 7, 2010 4:49 PM

Hi Smita,
This is helpful.
Just to be clear, Do we need to enter a different File Path for proposal in the Custom functional module (event 21) itself (which is separate from the path entered in FBPM selection variant for format ACH). Please let me know
Thanks
Ron

APP -f110 Payment medium creation

Hi Gurus,
We are having problem with payment medium in APP. It's being generated at proposal, payment run and Print out. Every time we run this individual step the system won't let us run it without selecting payment medium. As a result there are three DME files are created.
Now we are going to automating the email remittances and we don't want three email remittance going out each time to same supplier.
We just want the payment medium should be created once at payment update run.
Can anyone throw some light on this?
Your expert advise would be highly appreciated.
Thanks
Sam

To my understanding Payment medium gets generated only if "Payment medium" check box is selected in pop up which appears when we run click proposal run or payment run button. In that case, you should not flag this check box during proposal run.
Print programs are generally integrated to Payment run, hence you need not run print program again for DME files. This happens at the payment run automatically provided valid variant is attached in print parameters.

Payment Medium creation Out put ?

Hi Experts
When ever i run the payment proposal with the payment medium option also it is generating the DME file in the spool with out the immediate out put.
It used to create the DME file generation directly with out this issue before.
I went to User defaults in SU3 and tick marked the option Out put Immediately.
Then also the message is coming up.
Please let me know how to fix this part.
Thanks
Meenakshi.N

Hello
Sometimes even when you deactivate in open selection, the authorisation precede the output.
Please check with BASIS for deactivation to your profile.
Reg
suresh

BADI for payment medium program

Is there any badi / user exit for program RFFOF__V ?
Thank you .

Hi,
Try this procedure...
Procedure:
1. Go to transaction SE24 i.e. Class Builder.
2. Put the Object type as CL_EXITHANDLER and press Display.
3. Go to the tab of METHODS and double click on the method GET_INSTANCE.
4.When you double click it will lead you to the source code of the method.In the source
code at very start you will find code which method is called i.e.
get_class_name_by_interface. We need to just put a break-point on that.
5. There we will find a Changing parameter EXIT_NAME .This is the parameter which
will tell us that which BADI got Trigger at the point where we want to enhance the logic.
Find the transaction for this program RFFOF__V and excute the transaction. Then the the debugger will start and we will get the names of the BADI which Triggers.
Regards,
Sathish

Payment Medium Workbench Variants (SAPFPAYM)

Hello all,
We have been succesfully using the PMW for some months now, so I am familiar wih the customizing. However, due to new customer requirements, we need the user to be able to select the variant for SAPFPAYM in F110. I know that it is maintained centrally throgh customizing and that you can assign it to co.code, bank, banc account, etc. However, the name of our output file differs in accordance to different criteria and therefore we need to assign different variants for different utput file names. Does anybody know how to get SAPFPAYM to appear in F110 in order to select the variant?
I have seen in SAP help that in customizing you can assign several variants to the same combination of bank, co.code, etc. By activating this, would this allow the user to select either one of these variants in F110?
Many thanks for your help

Hello,
Maybe there is no need for different variants if you are building the filename dynamically. For this you may assign a function module to event 21 (FBZP, payment methods in country, choose method, press button "format settings", folder "Event Modules", add a row for event 21).
I'm using this solution in release 4.7.

How to process Customer format parameters with Payment Medium Workbench

Hi
I have one bank transfer scenario PC00_M99_FPAYM requiring supplying a payment using the French format FR_ETEBAC_CRT_DOM but the execution date of the bank transfer should be replaced by the banku2019s value date. I planned to enter this required date using the Customer format parameters when running PMW.
The issue I tried to solve is described here below.
How to extract the Customer format parameters assigned to the payment medium format FR_ETEBAC_VRT_DOM when processed by the Payment medium Workbench in order to fill the Customer specific user-defined fields (ZREF01 to ZREF10 in structure FPAYHX)?
I noticed the event type 06 authorizes function modules similar like FI_PAYMEDIUM_SAMPLE_06 but the customer format parameters are only available at low level in function module FI_PAYM_MEDIUM_OPEN (example gc_format_params_c)
Can someone help on this matter? That would be great.
Thanks in advance,
Henri.

Just sharing my findings and proposed solution.
This worked
The expected date is the value date/payee's bank.
This date is created by the bank transfer program prior to be processed by Payment Medium Creation Tool (SAPFPAYM)
According to functional investigation it sounds like the bank transfer program does not allow working with the value date/payee's bank.
The investigation has been done in the Payment Medium Creation Tool. It allows adding the required value date/payee's bank into a customer format parameter.
Required configuration and development:
- Clone the current sap format FR_ETEBAC_VRT-DOM into a new Customized format ZFR_ETEBAC_VRT-DOM
- Clone the corresponding DMEE object FR_ETEBAC_VRT-DOM into a new DMEE object tree type PAYM ZFR_ETEBAC_VRT-DOM
- Create a new data structure: ZFR_Bank_Transfer with field CRVAL Value Date at Payee's Bank (comp type PRQ_CRVAL)
- Assign customer structure ZFR_Bank_Transfer to payment format ZFR_ETEBAC_VRT-DOM and declare field CRVAL as required field
- Build function module ZFI_PAYMEDIUM_06_FR in charge to extract value date/payee's bank from the customer structure and move it to the customer specific user-defined field ES_FPAYHX_CREF-ZREF01
- in new DMEE object tree type PAYM ZFR_ETEBAC_VRT-DOM Replace Source field FPAYH-ZALDT by FPAYHX-ZREF01 in the header record

No Payment mediums created in FPY1

Hi Experts,
I have been trying to run FPY1 for gas.It runs fine for electricity.Payment mediums have been created and tested for electricity.
For gas i am facing some issues.
Log after i run FPY1 is as follows:
>Job started
>Step 001 started (program SAPFKPY3, variant &0000000000054, user ID RAOD)
>Format DTAUSN: No payment mediums created
>Step 002 started (program RFKPYL00_MASS, variant &0000000000043, user ID RAOD)
>No list generated
>Job finished
Long text for >Format DTAUSN: No payment mediums created
No payment media were created for payment group 101 for (Payment Medium)format DTAUSN.
I'm not sure where or how to correct this.It may be a very silly question, but would appreciate any help.
Thanks,
Dee

Dee:
Based on the message for the list, it sounds like no payments were generated, and thus no medium is generated. FICA does not much care for the distinction between gas and electric, especially in the payment scenario. Please verify that you are generating payments which should be sent out within this run.
regards,
bill.

Payment Medium - F110 - RFFOES_D - CBS19 FILE

Hi,
I have a problem concerning TR. F110 - domiciliary receipt ( recibo domiciliário ). The payment medium program is RFFOES_D. Everything is maintained and i can generate a file. The problem is that in TR F110 --> Environment --> payment medium --> DME administration i only can see " exported files " ( the icon appears in that collumn).
I had the same problem when creating with DMEE, i only could see the "second file" because in the Selection variants - TR OBPM4 - there was a check box to choose that.
Is there anything i could do in order to have the same beahaviour but for classic Payment Medium Programs?
for example if you put in google the following search criteria : " Programa automatico de pagos rffoes_d " the first one is a PDF file, in the last page there is the exact beahaviour that i want , concerning the CBS19 file.
Can u please help me, it's very urgent. Full points of course for any help !!
Thanks in advance,
Mário

Hi Naveen,
You need to maintain the variant for the Payment media. Please follow these twh steps to solve the probelm.
1. Check for the payment Methos 'E.' in country whether in OBVCU, a programme for Payment medium has been maintained, if not please maintain the same. For India it is RFFOIN_C.
2. Maintain the Variant for this programme under SE38 and select the same when setup the payment proposal under Printout/data medium.
Your problem will get solved and can see the payment media file generated.
Hope this resolves your issue.
Regards
Bharat

Payment medium workbench vs. payment media program.

Dear Friends,
Anybody have idea about the Pro's and Con's for "Payment medium workbench" vs. "payment media program".
Regards
Rupesh

Hi,
There is no disadvantage by using PMW.
I repeat it is a tool for which we can create the file format as per our requirements.
You will create the file format in t.code DMEE.
You can create different format files for each payment method with a variant defined.
The user can decide on the layout of the note to payee, and select differing notes to payee according to origin (vendors, customers, personnel, travel expenses, Treasury, online payments.
There is no technical knowledge required to use this tool.
Please refer below documentation for more.
http://help.sap.com/saphelp_dimp50/helpdata/en/f9/1962396d5e8573e10000000a114084/content.htm
Regards
SM
Edited by: shanumonu on Jan 2, 2012 8:00 AM

Payment Medium Format

Dear Friends,
After customized format tree created in T.code DMEE1, where and how can we attach this Payment Medium format to payment media program (RFFOM100).
After the f110 is completed, dmee is used and we have to download the Payment Medium file format according to the client specified format.
All the help will greatly apprecaiated.
Regards
Sridhar

hi,
before this you should configure a payment method ( T code OBVCU) , for payment data (DME) as per your client bank format. while creating payment method choose the payment medium program as RFFOM100. To generate the file, you have to run the APP this payment method.
After the payments have been successfully posted, you can go to DME administration and with the help of dme manager download files on your PC. SAP has determined that the standard print programs for automatic payments will no longer be supported, and they will be replaced by transfer structures created by a tool called the DME Engine.
This tool enables the business to create DME output files without ABAP development, and can be attached to a print program and form for the creation of Payment Advices.
Outside of the DME Engine (DMEE), the majority of the configuration takes place within the following
IMG Path: Financial Accounting -> Accounts Receivable and Accounts Payable -> Business Transactions -> Outgoing Payments -> Automatic Outgoing Payments -> Payment Media -> Make Settings for Payment Media Formats from Payment Medium Workbench Config
Assign Selection Variants
IMG -> Financial Accounting -> Accounts Receivable and Accounts Payable -> Business Transactions -> Outgoing Payments -> Automatic Outgoing Payments -> Payment Media -> Make Settings for Payment Medium Formats from Payment Medium Workbench -> Create / Assign Selection Variants or transaction
OBPM4..select your format that you are using
Check in FBZP config that all is linked!
Start with FBZP, create all there than go to DMEE either to create your own format or use the standard ones.. than go to the menu path above and work through from create to assign...
most of the work lies with payment method, and after running APP create the varient for the programms which are required.
regards,
rajendra

How to create new event in payment medium formats?

Hi Gurus please help,
How can I add new row into table tfpm042fb to add new event to payment meduim formats? I want to do an enhancement for ACH.
Best regards,
Pavan.

Hi,
It is in IMG config. Check SPRO transaction and follow Fin.Accoutning ->Accounts Recv. and Accounts payable->Buss. Trans.->Outgoing Payments -> Auto.Outgoing Payments->Payment Media->Make settings for Payment Medium Formats from Payment Medium Workbench->Adjust Payment Medium format
Also explore PMW(Payment Medium Workbench) for more details.
rgds,
PB

Exit for payment method(IDOC- PEXR2002)

Dear Experts,
I have add one Z Segment to the standard idoc PEXR2002 and msgtyp PAYEXT and now would like to pass the value to that Z segment field.
But i am not able to find out any Exit for payment method.
Program used to create the idoc is RFFOEDI1.
Kindly provide the solution.
Regards
Pankaj

if you will ook in the porgramit is sent via function module where there are lot of Call customer function which you can use for example EXIT_SAPLIEDP_902 i can see many.Just debuug it and check which suit your need.
Nabheet

Dynamic Filename in Sel screen for Payment Medium Creation program SAPFPAYM

Similar Messages

Maybe you are looking for