Dynamic Inner Join in 4.6c

Requirement is dynamic specification of Table name in inner join. The table names to be used in join would be derived in a variable using select statement. These names to be supplied to join dynamically. The other join conditions and where conditions will remain same.
For example :
On the basis of 1st select statement tables names are fetched in 2 variables tab1 & tab2.
Now want to use these two variables in inner join statement.
Searched and as per few example tried to do in following manner but its not working
data: tab1(10) type c value 'MARA',
        tab2(10) type c value 'MAKT'.
data: dbtab1(10) type c,
         dbtab2(10) type c .
dbtab1 = tab1.
dbtab2 = tab2.
DATA: BEGIN OF itab occurs 0,
           matnr TYPE mara-matnr,
           maktx type makt-maktx,
END OF itab.
DATA: column_syntax TYPE string,
            dbtab_syntax TYPE string.
PARAMETERS: p_matnr TYPE mara-matnr.
dbtab_syntax = '( (dbtab1) AS t1 '
&' INNER JOIN (dbtab2) AS t4 ON t1~MATNR = t4~MATNR )'.
SELECT matnr maktx
FROM (dbtab_syntax)
INTO TABLE itab WHERE t4~matnr   = p_matnr.
Got the following error:
"A table name, specified in an SQL command, is unknown"
It seems not able to identify table name dynamiccaly in dbtab_syntax.
thanks
anya
Edited by: Thomas Zloch on Nov 29, 2010 10:18 AM - please use code tags

Hi Anya,
Following code will be work
CONCATENATE dbtab1 ' as t1 INNER JOIN ' dbtab2 ' as t4 ON t1MATNR = t4MATNR ' INTO dbtab_syntax RESPECTING BLANKS.
TRANSLATE dbtab_syntax TO UPPER CASE.
SELECT t1~matnr maktx
FROM (dbtab_syntax)
INTO TABLE itab WHERE t4~matnr = p_matnr.
Note the following point
1) Don't used un-necessary bracket inside the SQL.
2) Specify alias name or table name when fields exit in both table while projection.
i.e. SELECT matnr maktx will be now SELECT t1~matnr maktx

Similar Messages

Dynamic inner joins

hi ,
      would any body suggest anything over the following code--- where there is wrong .
DATA itab LIKE SORTED TABLE OF wa
               WITH UNIQUE KEY fldate carrname connid.
data : var(80) value 'scarr AS c INNER JOIN spfli AS p ON pcarrid = ccarrid',
       var1(80) value 'AND pcityfrom = p_cityfr AND pcityto   = p_cityto'.
SELECT ccarrname pconnid
       INTO CORRESPONDING FIELDS OF TABLE itab
       FROM ( (var)
               (var1) ).
thanks
Jags

hi Jagdeesh,
there is a small confusion in using 'ON' and 'WHERE'.
Plz go ahead and changes accordingly.
DATA itab LIKE SORTED TABLE OF wa
WITH UNIQUE KEY fldate carrname connid.
data : var(80) value 'scarr AS c INNER JOIN spfli AS p ON pcarrid = ccarrid',
var1(80) value '<b>WHERE</b> pcityfrom = p_cityfr AND pcityto = p_cityto'.
SELECT ccarrname pconnid
INTO CORRESPONDING FIELDS OF TABLE itab
FROM ( (var)
(var1) ).
<b>Plz award points if this solved ur problem.</b>
Regards,
Kiran
thanks
Jags

Dynamic table name in an inner join - select statement

Hi,
Please can you let me know if is possible to use a Dynamic table name in an inner join?
Something like the statement below? (It works in a simple select statement but not in an inner join)
SELECT *
     INTO CORRESPONDING FIELDS OF <t_itab>
      FROM <Dynamic table name> INNER JOIN pa0050 ON
      ( <Dynamic table name>pernr = pa0050pernr )
       WHERE <Dynamic table name>~pernr = it_pernr-l_pernr
       AND pa0050~bdegr = f_bdegr.
Any help would be apprecited very much.
Thanks & Regards.

Hi,
Check this link.
[http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb39c4358411d1829f0000e829fbfe/frameset.htm]
[Re: accessing dynamic internal table's fields??;
hope it'll help u.
Regards,
Sneha.
Edited by: sneha kumari on Jun 18, 2009 1:57 PM

Dynamic Table name in Inner Join in 4.6c

data: tab1(10) type c value 'MARA',
        tab2(10) type c value 'MAKT'.
data: dbtab1(10) type c,
         dbtab2(10) type c .
dbtab1 = tab1.
dbtab2 = tab2.
DATA: BEGIN OF itab occurs 0,
           matnr TYPE mara-matnr,
           maktx type makt-maktx,
END OF itab.
DATA: column_syntax TYPE string,
            dbtab_syntax TYPE string.
PARAMETERS: p_matnr TYPE mara-matnr.
dbtab_syntax = '( (dbtab1) AS t1 '
&' INNER JOIN (dbtab2) AS t4 ON t1MATNR = t4MATNR )'.
SELECT matnr maktx
FROM (dbtab_syntax)
INTO TABLE itab WHERE t4~matnr   = p_matnr.
Got the following error:
"A table name, specified in an SQL command, is unknown"
It seems not able to read dynamic table name in dbtab_syntax.
thanks
anya
Moderation Message: Duplicate Post.
Edited by: kishan P on Nov 29, 2010 11:17 AM

Hi,
Check this link.
[http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb39c4358411d1829f0000e829fbfe/frameset.htm]
[Re: accessing dynamic internal table's fields??;
hope it'll help u.
Regards,
Sneha.
Edited by: sneha kumari on Jun 18, 2009 1:57 PM

INNER join with dynamic table name ?

Hi,
I have a problem with this statement.
DATA: g_dso_bic_dofr TYPE tabname.
SELECT t1~/bic/ziparomr
       t2~/bic/zifremom
INTO (wa_rater_paromr-/bic/ziparomr,
       wa_rater_paromr-/bic/zifremom)
*   FROM /bic/azd0bfr5100 AS t1     "equivalent to the dynamic statement below
" this is the problem
    FROM (g_dso_bic_dofr )AS t1
    INNER JOIN /bic/pzifremom AS t2
      ON t1~/bic/ziparomr = t2~/bic/ziparomr
" --- to here
    WHERE t1~/bic/zikom     = v_kommune
The compile check doesnt work when i use the variable table name.
I get
"Wrong expression "INNER" in FROM clause. WHERE condition."
Can anyone help me.
Br Rasmus.

" this is the problem
*    FROM (g_dso_bic_dofr )AS t1   "<<--- check spaces in here
    FROM (g_dso_bic_dofr) AS t1    "<<--- and here
    INNER JOIN /bic/pzifremom AS t2
      ON t1~/bic/ziparomr = t2~/bic/ziparomr
" --- to here
I think there's the problem, the space behind the parenthesis.
Regards

Inner Join for Dynamic Select statement

Hi All,
Can some one please help me in rewriting the below select statement where i have to remove the existing table1 by putting a dynamic table name which has the same table structure.
select a~zfield1
           a~zfield2
      from ztab1 as a
       inner join ztab2 as b
           on b~ztab1-zfield3 = a~ztab2-zfield3
     where a~zfield4 = 'A'.
I am looking something as below. But encountering an error when using the below statement
select a~zfield1
           a~zfield2
      from (v_ztab1) as a
       inner join ztab2 as b
           on b~ztab1-zfield3 = a~ztab2-zfield3
     where a~zfield4 = 'A'.
No Separate selects please. Please help me in rewriting the same select statement itself.
Regards,
PSK

hi,
What error you are getting ?
Also INTO is missing from the statement.
SELECT pcarrid pconnid ffldate bbookid
INTO TABLE itab
FROM ( spfli AS p
            INNER JOIN sflight AS f ON pcarrid = fcarrid AND
                                       pconnid = fconnid    )
WHERE p~cityfrom = 'FRANKFURT' AND
        p~cityto   = 'NEW YORK' .
thanks

Dynamic BD table name with inner join.

Hi experts,
I'm trying to do something like this:
if syst-datum(4)   > s_budat-high(4) or
   syst-datum4(2) > s_budat-high4(2).
tabname = 'MBEWH'.
else.
tabname = 'MBEW'.
endif.
select m1matnr m1mtart m3~bwkey
from ( mara as m1
      inner join marc as m2
        on m1matnr = m2matnr
      inner join (tabname) as m3
        on m1matnr = m3matnr and
           m2werks = m3bwkey )
where m1~matnr in s_matnr and
        m1~lvorm in s_lvorm and
        m1~mstae in s_mstae and
        m2~werks in s_werks.
endselect.
I get the following error: Incorrect expression "1000 %_#T953" in WHERE condition.
Should I forget the inner join with one dynamic table or is it possible to do?
Thanks in advance, best regards,
André Costa

Hi experts,
I'm trying to do something like this:
if syst-datum(4)   > s_budat-high(4) or
   syst-datum4(2) > s_budat-high4(2).
tabname = 'MBEWH'.
else.
tabname = 'MBEW'.
endif.
select m1matnr m1mtart m3~bwkey
from ( mara as m1
      inner join marc as m2
        on m1matnr = m2matnr
      inner join (tabname) as m3
        on m1matnr = m3matnr and
           m2werks = m3bwkey )
where m1~matnr in s_matnr and
        m1~lvorm in s_lvorm and
        m1~mstae in s_mstae and
        m2~werks in s_werks.
endselect.
I get the following error: Incorrect expression "1000 %_#T953" in WHERE condition.
Should I forget the inner join with one dynamic table or is it possible to do?
Thanks in advance, best regards,
André Costa

Dynamic SQL - Inner Join

I just starting to Learn and use Dynamic SQL.
I am trying use a inner join query in dynamic SQL
for Example say 'Select A.id as Itemid , A.name as Itemname from TableA A inner join TableB B On A.ID = B.ID where B.ID typeid = 1 '
for some reason this is not working . i for sure know the query works as when i run the query it works fine. when i try to run it dynamically it give me blank values.
Please let me know if you need more information.
Appreicate Your help!!
Thanks,
Chaitanya

Here is an example for dynamic SQL from BOL:
DECLARE @IntVariable int;
DECLARE @SQLString nvarchar(500);
DECLARE @ParmDefinition nvarchar(500);
/* Build the SQL string one time.*/
SET @SQLString =
N'SELECT BusinessEntityID, NationalIDNumber, JobTitle, LoginID
FROM AdventureWorks2012.HumanResources.Employee
WHERE BusinessEntityID = @BusinessEntityID';
SET @ParmDefinition = N'@BusinessEntityID tinyint';
/* Execute the string with the first parameter value. */
SET @IntVariable = 197;
EXECUTE sp_executesql @SQLString, @ParmDefinition,
@BusinessEntityID = @IntVariable;
/* Execute the same string with the second parameter value. */
SET @IntVariable = 109;
EXECUTE sp_executesql @SQLString, @ParmDefinition,
@BusinessEntityID = @IntVariable;
Basically any query can be run as dynamic SQL. However, static SQL is the first choice. Use dynamic SQL if needed.
Dynamic SQL examples:
http://www.sqlusa.com/bestpractices/dynamicsql/
Kalman Toth Database & OLAP Architect
SQL Server 2014 Design & Programming
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

Select Query with Inner Join

Dear Experts,
I have writen a inner join code with MKPF and MSEG which taking too much time, while I have used index.
Indexes are:
MSEG
MATNR
WERKS
LGORT
BWART
SOBKZ
MKPF
BUDAT
MBLNR
My Select Query is :
SELECT B~MATNR
               B~MAT_KDAUF
               B~MAT_KDPOS
               B~BWART
               B~MENGE
               B~MEINS
               B~AUFNR
    INTO TABLE IT_MSEG
    FROM MKPF AS A
      INNER JOIN MSEG AS B
         ON AMBLNR EQ BMBLNR
        AND AMJAHR EQ BMJAHR
    WHERE A~BUDAT IN BUDAT
      AND B~MATNR IN MATNR
      AND B~WERKS IN WERKS
      AND B~LGORT IN LGORT
      AND B~BWART IN BWART.

hi,
you can use for all entries it will work faster then joins
About it:*
FOR ALL ENTRIES WHERE
Syntax
... FOR ALL ENTRIES IN itab WHERE ... col operator itab-comp ...
Effect
If the addition FOR ALL ENTRIES is specified before the language element WHERE, then the components comp of the internal table itab can be used as operands when comparing with relational operators.
The internal table itab must have a structured line type and the component comp must be compatible with the column col.
The logical expression sql_cond of the WHERE condition can comprise various logical expressions by using AND and OR. However, if FOR ALL ENTRIES is specified, there must be at least one Comparison with a column of the internal table itab, which can be specified either statistically or dynamically (Release 6.40 and higher). In a statement with a SELECTstatement with FOR ALL ENTRIES, the addition ORDER BY can only be used with the addition PRIMARY KEY.
The whole logical expression sql_cond is evaluated for each individual line of the internal table itab. The resulting set of the SELECT statement is the union of the resulting sets from the individual evaluations. Duplicate lines are automatically removed from the resulting set. If the internal table itab is empty, the whole WHERE statement is ignored and all lines in the database are put in the resulting set.
Notes
In Release 6.10 and higher, the same internal table can be specified after FOR ALL ENTRIES and after INTO.
The addition FOR ALL ENTRIES is only possible before WHERE conditions of the SELECT statement.
Example
Exporting all flight data for a specified departure city. The relevant airlines and flight numbers are first put in an internal table entry_tab, which is evaluated in the WHERE condition of the subsquent SELECT statement.
PARAMETERS p_city TYPE spfli-cityfrom.
TYPES: BEGIN OF entry_tab_type,
         carrid TYPE spfli-carrid,
         connid TYPE spfli-connid,
       END OF entry_tab_type.
DATA: entry_tab   TYPE TABLE OF entry_tab_type,
      sflight_tab TYPE SORTED TABLE OF sflight
                       WITH UNIQUE KEY carrid connid fldate.
SELECT carrid connid
       FROM spfli
       INTO CORRESPONDING FIELDS OF TABLE entry_tab
       WHERE cityfrom = p_city.
SELECT carrid connid fldate
       FROM sflight
       INTO CORRESPONDING FIELDS OF TABLE sflight_tab
       FOR ALL ENTRIES IN entry_tab
       WHERE carrid = entry_tab-carrid AND
             connid = entry_tab-connid.
hope it will help you
Rahul sharma
Edited by: RAHUL SHARMA on Sep 11, 2008 8:10 AM

Inner join command

Hi Forum,
How to use Inner join command?
Please explain with an example.
Thanks,
Mahathi

Inner Join and Outer Join
The data that can be selected with a view depends primarily on whether the view implements an inner join or an outer join. With an inner join, you only get the records of the cross-product for which there is an entry in all tables used in the view. With an outer join, records are also selected for which there is no entry in some of the tables used in the view.
The set of hits determined by an inner join can therefore be a subset of the hits determined with an outer join.
Database views implement an inner join. The database therefore only provides those records for which there is an entry in all the tables used in the view. Help views and maintenance views, however, implement an outer join.
Specifying Database Tables
The FROM clause determines the database tables from which the data specified in the SELECT clause is read. You can specify either a single table or more than one table, linked using inner or outer joins. The names of database tables may be specified statically or dynamically, and you can use alias names. You can also use the FROM clause to bypass the SAP buffer and restrict the number of lines to be read from the database.
"Database table" can equally mean an ABAP Dictionary view. A view links two or more database tables in the ABAP Dictionary, providing a static join that is available systemwide. You can specify the name of a view wherever the name of a database table may occur in the FROM clause.
The FROM clause has two parts - one for specifying database tables, and one for other additions:
SELECT... FROM <tables> <options>...
In <tables>, you specify the names of database tables and define joins. <options> allows you to specify further additions that control the database access.
Specifying Database Tables Statically
To specify the name of a database table statically, use the following:
SELECT... FROM <dbtab> [AS <alias>] <options> . ..
The database table <dbtab> must exist in the ABAP Dictionary. The AS addition allows you to specify an alternative name <alias> that you can then use in the SELECT; FROM, WHERE, and GROUP BY clauses. This can eliminate ambiguity when you use more than one database table, especially when you use a single database table more than once in a join. Once you have defined an alias, you may no longer use the real name of the database table
Specifying Database Tables Dynamically
To specify the name of a database table dynamically, use the following:
SELECT... FROM (<name>) <options> . ..
The field <name> must contain the name of a database table in the ABAP Dictionary. The table name must be written in uppercase. When you specify the name of a database table dynamically, you cannot use an empty INTO clause to read all of the columns into the work area <dbtab>. It is also not possible to use alternative table names.
Specifying Two or More Database Tables as an Inner Join
In a relational database, you normally need to read data simultaneously from more than one database table into an application program. You can read from more than one table in a single SELECT statement, such that the data in the tables all has to meet the same conditions, using the following join expression:
SELECT...
FROM <tab> [INNER] JOIN <dbtab> [AS <alias>] ON <cond> <options>
where <dbtab> is a single database table and <tab> is either a table or another join expression. The database tables can be specified statically or dynamically as described above. You may also use aliases. You can enclose each join expression in parentheses. The INNER addition is optional.
A join expression links each line of <tab> with the lines in <dbtab> that meet the condition <cond>. This means that there is always one or more lines from the right-hand table that is linked to each line from the left-hand table by the join. If <dbtab> does not contain any lines that meet the condition <cond>, the line from <tab> is not included in the selection.
The syntax of the <cond> condition is like that of the WHERE clause, although individual comparisons can only be linked using AND. Furthermore, each comparison must contain a column from the right-hand table <dbtab>. It does not matter on which side of the comparison it occurs. For the column names in the comparison, you can use the same names that occur in the SELECT clause, to differentiate columns from different database tables that have the same names.
The comparisons in the condition <cond> can appear in the WHERE clause instead of the ON clause, since both clauses are applied equally to the temporary table containing all of the lines resulting from the join. However, each join must contain at least one comparison in the condition <cond>.
Specifying Two or More Database Tables as a Left Outer Join
In an inner join, a line from the left-hand database table or join is only included in the selection if there is one or more lines in the right-hand database table that meet the ON condition <cond>. The left outer join, on the other hand, reads lines from the left-hand database table or join even if there is no corresponding line in the right-hand table.
SELECT...
FROM <tab> LEFT [OUTER] JOIN <dbtab> [AS <alias>] ON <cond>
       <options>
<tab> and <dbtab> are subject to the same rules and conditions as in an inner join. The OUTER addition is optional. The tables are linked in the same way as the inner join with the one exception that all lines selected from <tab> are included in the final selection. If <dbtab> does not contain any lines that meet the condition <cond>, the system includes a single line in the selection whose columns from <dbtab> are filled with null values.
In the left outer join, more restrictions apply to the condition <cond> than in the inner join. In addition to the above restrictions:
EQ or = is the only permitted relational operator.
There must be at least one comparison between columns from <tab> and <dbtab>.
The WHERE clause may not contain any comparisons with columns from <dbtab>. All comparisons using columns from <dbtab> must appear in the condition <cond>.
Client Handling
As already mentioned, you can switch off the automatic client handling in Open SQL statements using a special addition. In the SELECT statement, the addition comes after the options in the FROM clause:
SELECT... FROM <tables> CLIENT SPECIFIED. ..
If you use this addition, you can then address the client fields in the individual clauses of the SELECT statement.
Disabling Data Buffering
If buffering is allowed for a table in the ABAP Dictionary, the SELECT statement always reads the data from the buffer in the database interface of the current application server. To read data directly from the database table instead of from the buffer, use the following:
SELECT... FROM <tables> BYPASSING BUFFER. ..
This addition guarantees that the data you read is the most up to date. However, as a rule, only data that does not change frequently should be buffered, and using the buffer where appropriate improves performance. You should therefore only use this option where really necessary.
Restricting the Number of Lines
To restrict the absolute number of lines included in the selection, use the following:
SELECT... FROM <tables> UP TO <n> ROWS. ..
If <n> is a positive integer, the system reads a maximum of <n> lines. If <n> is zero, the system reads all lines that meet the selection criteria. If you use the ORDER BY clause as well, the system reads all lines belonging to the selection, sorts them, and then places the first <n> lines in the selection set.
Examples
Specifying a database table statically:
REPORT demo_select_static_database.
DATA wa TYPE scarr.
SELECT *
INTO wa
FROM scarr UP TO 4 ROWS.
WRITE: / wa-carrid, wa-carrname.
ENDSELECT.
The output is:
The system reads four lines from the database table SCARR.
Specifying a database table dynamically:
REPORT demo_select_dynamic_database.
DATA wa TYPE scarr.
DATA name(10) TYPE c VALUE 'SCARR'.
SELECT *
INTO wa
FROM (name) CLIENT SPECIFIED
WHERE mandt = '000'.
WRITE: / wa-carrid, wa-carrname.
ENDSELECT.
A condition for the MANDT field is allowed, since the example uses the CLIENT SPECIFIED option. If NAME had contained the value scarr instead of SCARR, a runtime error would have occurred.
Inner join:
REPORT demo_select_inner_join.
DATA: BEGIN OF wa,
        carrid TYPE spfli-carrid,
        connid TYPE spfli-connid,
        fldate TYPE sflight-fldate,
        bookid TYPE sbook-bookid,
      END OF wa,
      itab LIKE SORTED TABLE OF wa
                WITH UNIQUE KEY carrid connid fldate bookid.
SELECT pcarrid pconnid ffldate bbookid
INTO CORRESPONDING FIELDS OF TABLE itab
FROM ( ( spfli AS p
            INNER JOIN sflight AS f ON pcarrid = fcarrid AND
                                       pconnid = fconnid    )
            INNER JOIN sbook   AS b ON bcarrid = fcarrid AND
                                       bconnid = fconnid AND
                                       bfldate = ffldate     )
WHERE p~cityfrom = 'FRANKFURT' AND
        p~cityto   = 'NEW YORK' AND
        fseatsmax > fseatsocc.
LOOP AT itab INTO wa.
AT NEW fldate.
    WRITE: / wa-carrid, wa-connid, wa-fldate.
ENDAT.
WRITE / wa-bookid.
ENDLOOP.
This example links the columns CARRID, CONNID, FLDATE, and BOOKID of the table SPFLI, SFLIGHT, and SBOOK, and creates a list of booking numbers for all flights from Frankfurt to New York that are not fully booked. An alias name is assigned to each table.
Left outer join:
REPORT demo_select_left_outer_join.
DATA: BEGIN OF wa,
        carrid   TYPE scarr-carrid,
        carrname TYPE scarr-carrname,
        connid   TYPE spfli-connid,
      END OF wa,
      itab LIKE SORTED TABLE OF wa
                WITH NON-UNIQUE KEY carrid.
SELECT scarrid scarrname p~connid
INTO CORRESPONDING FIELDS OF TABLE itab
FROM scarr AS s
       LEFT OUTER JOIN spfli AS p ON scarrid   = pcarrid AND
                                     p~cityfrom = 'FRANKFURT'.
LOOP AT itab INTO wa.
WRITE: / wa-carrid, wa-carrname, wa-connid.
ENDLOOP.
The output might look like this:
The example links the columns CARRID, CARRNAME, and CONNID of the tables SCARR and SPFLI using the condition in the left outer join that the airline must fly from Frankfurt. All other airlines have a null value in the CONNID column in the selection.
If the left outer join is replaced with an inner join, the list looks like this:
Only lines that fulfill the ON condition are included in the selection.

Problem in Accession inner join with [Microsoft][SQLServer 2000 Driver

Hi
Can you tell me what can be cause my sql statement is correct gives result but
if i used below statement in my JSP ,cause error
1)
ps1=connection.prepareStatement("select RQM_IN_RQSTN_ID_PK,RQD_IN_ITM_ID_FKPK,RQD_VC_ITM_DSCRPTN,RQD_IN_STTS_ID_FK,C.SMT_VC_STTS_NM,a.RQM_DT_PRPSD_DLVRY_DT"+
"from PAS_RQM_RQSTN_MSTR a "+
"inner join PAS_RQD_RQSTN_DTLS b on a.RQM_IN_RQSTN_ID_PK = b.RQD_IN_RQSTN_ID_FKPK and RQD_IN_STTS_ID_FK = 4"+
"INNER JOIN PAS_SMT_STTS_MSTR C ON C.SMT_IN_STTS_ID_PK=B.RQD_IN_STTS_ID_FK" +
"where a.RQM_VC_DTRTMNT_INVLV='Technology' ");
2) Error Generate
java.sql.SQLException
[Microsoft][SQLServer 2000 Driver for JDBC][SQLServer]Line 1: Incorrect syntax near 'a'.
What can be the cause
Thanks

ps1=connection.prepareStatement("select
RQM_IN_RQSTN_ID_PK,RQD_IN_ITM_ID_FKPK,RQD_VC_ITM_DSCRP
TN,RQD_IN_STTS_ID_FK,C.SMT_VC_STTS_NM,a.RQM_DT_PRPSD_D
LVRY_DT"+
"from PAS_RQM_RQSTN_MSTR a "+
"inner join PAS_RQD_RQSTN_DTLS b on
a.RQM_IN_RQSTN_ID_PK = b.RQD_IN_RQSTN_ID_FKPK and
RQD_IN_STTS_ID_FK = 4"+
"INNER JOIN PAS_SMT_STTS_MSTR C ON
C.SMT_IN_STTS_ID_PK=B.RQD_IN_STTS_ID_FK" +
"where a.RQM_VC_DTRTMNT_INVLV='Technology' ");This is a problem due to not providing spaces where they are needed. See the places where I have highlighted.
A better way is to generate the String first [use StringBuffer as a good practice for appending instead of String "+"] and print it out to check if it is correct.
***Annie***

Data is not fetching in inner join

Hi Experts,
I developed a select query using inner joins, all the fields data is gettting appended, but one field DISPO data is not getting appeneded. please check the innerjoin and suggest me ur soluitons.
MODULE GET_DATA OUTPUT.
select   arbpl
         sptag
         aufnr
         plnum
         posnr
         plnfl
         werks from s022
                    into table it_s022
                     where arbpl in s_arbpl
                      and werks in s_werks
                      and sptag in s_sptag
                      and matnr in s_matnr.
if sy-subrc eq 0.
select a~aufnr
       a~posnr
       a~kdauf
       a~pgmng
       a~plnum
       a~strmp
       b~plnty
       b~gamng
       b~igmng
       b~iasmg
       b~rmnga
       b~gstrp
       b~rsnum
       b~plnbez
       b~dispo
       c~maktx
       b~plnnr
       b~plnty
       b~zaehl
       d~vornr
       d~ltxa1
       b~aufpl
       b~aplzt
       e~astnr
       into corresponding fields of table it_afpo from afko as b
                inner join afpo as a
                 on a~aufnr = b~aufnr
                inner join makt as c
                 on b~plnbez = c~matnr
                inner join plpo as d
                 on b~plnnr = d~plnnr
                  and b~plnty = d~plnty
                  and b~zaehl = d~zaehl
                 inner join aufk as e
                  on b~aufnr = e~aufnr
                inner join marc as f
                 on bplnty = fmatnr
                for all entries in it_s022
                 where b~aufnr = it_s022-aufnr.
                     and e~erdat = it_s022-sptag
                 and a~posnr = it_s022-posnr
                and a~plnum = it_s022-plnum . .
if sy-subrc eq 0.
    it_afpo1[] = it_afpo[].
    sort it_afpo1 by aufpl." aplzt."""
    delete ADJACENT DUPLICATES FROM it_afpo1 COMPARING aufpl." aplzt ."""
    select aufpl
           aplzl
           fsavd
           fsavz
           ssedd
           ssedz
           mgvrg
            FROM afvv INTO TABLE It_afvv
                           FOR ALL ENTRIES IN IT_afpo1
                           WHERE aufpl = IT_afpo1-aufpl.
                            and aplzl = it_afpo1-aplzt.
   endif.
loop at it_afpo into wa_afpo.
DATA : G_SLNO(8) TYPE C.
G_SLNO = G_SLNO + 1.
wa_afpo-slno = g_slno.
    move-corresponding wa_afpo to wa_final.
   move-corresponding wa_afko to wa_final.
read table it_afvv into wa_afvv with key
            aufpl = wa_afpo-aufpl binary search."aplzl = wa_afpo-aplzt binary search."""
*read table it_afko into wa_afko with key aufnr = wa_final-aufnr.
IF SY-SUBRC EQ 0.
    move-corresponding wa_afvv to wa_final.
bal_qty = wa_final-gamng - wa_final-igmng.
    move : wa_afpo-slno to wa_final-slno,
           wa_afpo-aufnr to wa_final-aufnr,
           wa_afpo-posnr to wa_final-posnr,
           wa_afpo-kdauf to wa_final-kdauf, " Sales order Number
           wa_afpo-pgmng to wa_final-pgmng, " Order item qty
           wa_afpo-plnum to wa_final-plnum, " Planned Order Qty
           wa_afpo-strmp to wa_final-strmp, " Planned Order Date
           wa_afpo-gstrp to wa_final-gstrp, " Basic Finish date
           wa_afpo-rsnum to wa_final-rsnum, " Number of Reservation
           wa_afpo-plnbez to wa_final-plnbez, " Material Number
           wa_afpo-maktx to wa_final-maktx,
           wa_afpo-plnnr to wa_final-plnnr,
           wa_afpo-plnty to wa_final-plnty,
           wa_afpo-zaehl to wa_final-zaehl,
           wa_afpo-vornr to wa_final-vornr,
           wa_afpo-ltxa1 to wa_final-ltxa1,
           wa_afpo-aufpl to wa_final-aufpl,
           wa_afvv-fsavd to wa_final-fsavd,
           wa_afvv-fsavz to wa_final-fsavz,
           wa_afvv-ssedd to wa_final-ssedd,
           wa_afvv-ssedz to wa_final-ssedz,
           wa_afvv-mgvrg to wa_final-mgvrg,
           wa_afko-igmng to wa_final-igmng,
           wa_afko-iasmg to wa_final-iasmg,
           wa_afko-rmnga to wa_final-rmnga,
           wa_afko-dispo to wa_final-dispo,
          wa_afko-bal_qty to wa_final-bal_qty,
           wa_aufk-astnr to wa_final-astnr,
           wa_afpo-text to wa_final-text.
*bal_qty = wa_final-gamng - wa_final-igmng.
*bal_qty = wa_afko-bal_qty.
endif.
append wa_final to it_final.
clear:wa_final ,wa_afpo,wa_afvv,wa_aufk,wa_afko.
endloop.
endif.
ENDMODULE.                 " GET_DATA OUTPUT
*&      Module DISPLAY_DATA OUTPUT
      text
MODULE DISPLAY_DATA OUTPUT.
IF REF_CONTAINER IS INITIAL.
     PERFORM FIELD_CAT.
CREATE OBJECT REF_CONTAINER
EXPORTING
       PARENT                      =
    CONTAINER_NAME              = 'CUSTOM_CONTROL'
       STYLE                       =
       LIFETIME                    = lifetime_default
       REPID                       =
       DYNNR                       =
       NO_AUTODEF_PROGID_DYNNR     =
      EXCEPTIONS
        CNTL_ERROR                  = 1
        CNTL_SYSTEM_ERROR           = 2
        CREATE_ERROR                = 3
        LIFETIME_ERROR              = 4
        LIFETIME_DYNPRO_DYNPRO_LINK = 5
        others                      = 6
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
               WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
L_LAYO-ZEBRA = 'X'.
L_LAYO-GRID_TITLE = 'JOB CARD'.
data: variant type disvariant.
CREATE OBJECT REF_ALV_GRID
    EXPORTING
       I_SHELLSTYLE      = 0
       I_LIFETIME        =
      I_PARENT          = REF_CONTAINER
       I_APPL_EVENTS     = space
       I_PARENTDBG       =
       I_APPLOGPARENT    =
       I_GRAPHICSPARENT =
       I_NAME            =
       I_FCAT_COMPLETE   = SPACE
      EXCEPTIONS
        ERROR_CNTL_CREATE = 1
        ERROR_CNTL_INIT   = 2
        ERROR_CNTL_LINK   = 3
        ERROR_DP_CREATE   = 4
        others            = 5
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
               WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
l_variant-report = sy-cprog.
*data: l_prnt type lvc_s_prnt.
*l_prnt-print = 'X'.
SORT T_FCAT.
call method ref_alv_grid->set_ready_for_input
   exporting
    i_ready_for_input = 1.
create object event_receiver.
   set handler event_receiver->handle_top_of_page for ref_alv_grid.
CALL METHOD REF_ALV_GRID->SET_TABLE_FOR_FIRST_DISPLAY
       EXPORTING
       I_BUFFER_ACTIVE               =
       I_BYPASSING_BUFFER            =
       I_CONSISTENCY_CHECK           =
       I_STRUCTURE_NAME              =
        is_variant                     = variant   "l_variant
        i_save                        = 'X'
       I_DEFAULT                     = 'X'
         IS_LAYOUT                     = L_LAYO
       IS_PRINT                      =
       IT_SPECIAL_GROUPS             =
       IT_TOOLBAR_EXCLUDING          =
       IT_HYPERLINK                  =
       IT_ALV_GRAPHICS               =
       IT_EXCEPT_QINFO               =
       IR_SALV_ADAPTER               =
    CHANGING
      IT_OUTTAB                     = IT_final[]
      IT_FIELDCATALOG               = T_FCAT
       IT_SORT                       =
       IT_FILTER                     =
      EXCEPTIONS
        INVALID_PARAMETER_COMBINATION = 1
        PROGRAM_ERROR                 = 2
        TOO_MANY_LINES                = 3
        others                        = 4
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
               WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
   create object g_event_receiver.
   set handler g_event_receiver->handle_user_command for ref_alv_grid.
   set handler g_event_receiver->handle_toolbar for ref_alv_grid.
§ 4.Call method 'set_toolbar_interactive' to raise event TOOLBAR.
   call method ref_alv_grid->set_toolbar_interactive.
   call method cl_gui_control=>set_focus exporting control = ref_alv_grid.
ENDIF.
ENDMODULE.                 " DISPLAY_DATA OUTPUT
*&      Module STATUS_0100 OUTPUT
      text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'MAIN001'.
SET TITLEBAR 'xxx'.
Regards,
Bharath Kumar

I agree with Shiva Kumar - most likely there is no such field in it_afpo. A few more suggestions though:
1) Do not post large pieces of code here - if you have a question about a particular SELECT statement, post only that statement and relevant data definitions. No one is going to read your whole program anyway - we have work to do too.
2) Your JOIN is way too big and would be difficult to analyze if anything goes wrong. You might want to start with smaller SELECTs and, when you're sure everything is working correctly, then combine them into one. Also huge JOINT is not necessarily more efficient.
3) You don't have to use aliases "AS a... AS b", etc. Instead, just use the table name, e.g. AFKO... AFPO... .It is much easier to read this way. The aliases are needed only if you're joining the same table more than once. Also they're not limited to one letter either.

Link for BUT000 table and ADRC in CRM and inner join is not working in PCUI

Hi Gurus,
   Please tell me the link btween BUT000 and ADRC table. and i wrote one inner join between BUT000 and BUT0id table but it not working. I m in CRM 4.0 version working with PCUI.
select but000partner but000name_org1 but000name_org2 but000bus_sort1 but0id~parnter1
      but0ididnumber from but000 inner join but0id on but0idpartner = but000~parnter
into corresponding fields of table it_result where partner in s_partner.
It is giving error as partner unknown from but000 table. I delcared everything and tried with alias names also.
please clarify me.
regards,
Ramakrishna.

Hi Frederic,
   thanks a lot. But is inner join between BUT000 and BUT0ID will work. for me it is not working. plesae see this code.
tables : but000,
         but0id,
         crmm_but_custno,
         adrc.
types : begin of typ_but000,
        partner type bu_partner,
        name_org1 type BU_NAMEOR1,
        name_org2 type BU_NAMEOR2,
        bu_sort1 type BU_SORT1,
        idnumber type BU_ID_NUMBER,
        partner1 type bu_partner,
        end of typ_but000.
data: lt_but000 type table of typ_but000,
      ls_but000 like line of lt_but000.
*select-options : s_partnr for but000-partner.
start-of-selection.
      select but000partner but000name_org1 but000name_org2 but000bu_sort1 but0id~parnter1
                but0id~idnumber into corresponding fields of table lt_but000 from but000
                inner join but0id on but0idpartner = but000parnter. " where partner in s_partner.
it is giving error as but000-partner is not know or but0id-partner not known.
So, i think if it not works then i should write two select stmts.
please clarify me.
i gave u rating.
thanks
ramakrishna.

Relationship between tables while using inner joins.

Hi,
I had a few clarifications on "inner joins", and as i was going through the forum, i came across two points,
1. In one of the threads it said " inner joins is applicable for tables that have a parent child relationship.
2. In another thread it said " inner join is established from master table (the table on the left) to the transcation table (the table on the right)".
I have two clarifications based on the above points.
1. Is it necessary that the tables on which im performing an inner join should have a parent-child/children relationship or is it enough that the tables just have a common field.
2. Also is it necessary that the master table should come first, (or can i use any child table from where i can fetch the records when there is a mater table in my report) as shown below.
Eg: select * <fields> from <master table> inner join <table> on <field> into <itab>.
Edited by: Narayananchandran on Dec 27, 2010 12:31 PM

have two clarifications based on the above points.
1. Is it necessary that the tables on which im performing an inner join should have a parent-child/children relationship or is it enough that the tables just have a common field.
2. Also is it necessary that the master table should come first, (or can i use any child table from where i can fetch the records when there is a mater table in my report) as shown below.
Eg: select * <fields> from <master table> inner join <table> on <field> into <itab>
1) NO
2) NO

Convert SSRS dropdown MDX query to INNER JOIN w/ NONEMPTY? Having hard time with this.

I'm having an incredibly hard time with this, mostly because I'm very new with MDX.
I created a simple report (with AdventureWorksDW) whose datasource is an SSAS cube. I select a datekey from the dropdown menu, and the report displays [Measures].[Order Quantity] for that day.
The problem is that the dropdown displays every single value from the dimdate dimension. DimDate goes from 20050101 to 20201231, so the dropdown is very long.
How can I alter the SSRS-generated MDX so that it does an INNER JOIN with Fact table and only the dates shown in the dropdown are the ones where there's data in the Fact table?
Currently, the fact table only has 2 days of data (20141015, 20141016), which means that the dropdown should only display those two dates. I'm including the generated code MDX that populates the dropdown menu:
WITH MEMBER [Measures].[ParameterCaption] AS
[Dim Date].[Date Key].CURRENTMEMBER.MEMBER_CAPTION
MEMBER [Measures].[ParameterValue] AS
[Dim Date].[Date Key].CURRENTMEMBER.UNIQUENAME
MEMBER [Measures].[ParameterLevel] AS
[Dim Date].[Date Key].CURRENTMEMBER.LEVEL.ORDINAL
SELECT {[Measures].[ParameterCaption],
[Measures].[ParameterValue], [Measures].[ParameterLevel]}
ON COLUMNS , [Dim Date].[Date Key].ALLMEMBERS ON ROWS
FROM [Adventure Works cube]
Any help is appreciated.
VM

Hi vmhatup,
you can get rid of blank data using nonempty function and get rid of negative values using filter function nonempty should be inside of filter so it applies first, otherwise it is too slow.
Your statement could look like this
WITH MEMBER [Measures].[ParameterCaption] AS
[Dim Date].[Date Key].CURRENTMEMBER.MEMBER_CAPTION
MEMBER [Measures].[ParameterValue] AS
[Dim Date].[Date Key].CURRENTMEMBER.UNIQUENAME
MEMBER [Measures].[ParameterLevel] AS
[Dim Date].[Date Key].CURRENTMEMBER.LEVEL.ORDINAL
SELECT {[Measures].[ParameterCaption],
[Measures].[ParameterValue], [Measures].[ParameterLevel]}
ON COLUMNS
, filter(
nonempty([Dim Date].[Date Key].[Date Key],measures.measureName)
,measure.measurename >0
ON ROWS
FROM [Adventure Works cube]
Jiri Neoral

Dynamic Inner Join in 4.6c

Similar Messages

Maybe you are looking for