Dynamic link to Quicktime

Hello,
I've been having some trouble with the following code,
basically it doesn't like dynamic values I have supplied for value
of src. However when I output TestVar and place that value in
instead it works fine. An exampe of what TestVar might contain is
../../UploadedDocs/Sony/01_opt_003a_020_v001.mov
Any suggestions?
<object
classid="clsid:02BF25D5-8C17-4B23-BC80-D3488ABDDC6B"
width="800" height="500"
codebase="
http://www.apple.com/qtactivex/qtplugin.cab">
<param name="src" value="#TestVar#">
<param name="autoplay" value="true">
<param name="playeveryframe" value="true">
<param name="controller" value="true">
<embed src="#TestVar#" width="800" height="500"
autoplay="true"
controller="true" loop="false" playeveryframe="true"
pluginspage="
http://www.apple.com/quicktime/download/">
</embed>
</object>

Please excuse my stupidity, I failed to put
<cfoutput></cfoutput> tags around the variable.

Similar Messages

Dynamic Link and Quicktime error in Adobe After effects cs6.

Hi.
So i have installed this software for a long time and yesterday, when i opened it. it showed the error message:
But i already have Quicktime installed in my PC?!?!, so i click "ok" and then it showed this:
So i just skip ahead, and after that when it initialized the User Interface, it showed this:
after that it showed this:
And then it just crashed and exit.
PLEASE SOMEONE HELPP!!!
btw i'm running a Windows 8 PC with an intel core i3 and 4 Gigs of RAM, also with an intel HD graphics Family GPU.

fixing permissions problem that impedes start of Adobe applications

I installed an update of QuickTime. I re-started the computer. A shrill noise occurred, then a window popped up that said "The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. What in the world is

I received a message that an update of QuickTime was available. I decided to update. When I re-started my computer, a shrill noise (error noise) occurred and a message popped up in a box: The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll Does anyone know what this means and how to correct it? PLEASE!

Refer to this thread - https://discussions.apple.com/message/15685210#15685210
Quick answer "copy the file SQLite3.dll from the C:\Program Files (x86)\Common Files\Apple\Apple Application Support folder to the C:\Program Files (x86)\Common Files\Apple\Mobile Device Support folder"

Erratic performance / missing footage with Premiere Pro CC and After Effects CC 2014 dynamic links

Hi all,
I briefly touched on this amongst a host of other issues I has having while cutting my last project.
Unfortunately I never heard anything from anyone regarding my issues with the Dynamic Link system.
I had to bite the bullet and export (2-4K RAW) chunks of my last project, out of premiere using a Quicktime animation codec. This added an extra week to the post production process (which I did NOT get paid for).
I'm also a bit frustrated because it pushed the project past the deadline. Though the client was understanding, they were far from thrilled and it reflects poorly on me.
Anyhow. Project complete, on to the next-
This time, I'm using mostly footage shot from an FS700 in AVCHD. I figured maybe the RED footage was somehow too much for the program to handle with my specs, however I am having the same issue as last time.
I'll select a clip, or group of clips, go to replace with after effects composition, and sometimes they all make it, and often times they don't. The clips were shot within a couple minutes of one another and no settings were changed on the camera.
I've noticed sometime's the media will show up in the timeline, but not appear on the monitor (as pictured below). Other times the name of the clip will appear in the comp, but there will be nothing on the timeline OR in the monitor.
Never had this problem in CS6.
Adobe or anybody, please help! This is absolutely killing my workflow, and costing me time and money.
Here are my specs:
I'm running Adobe Premiere CC 2014 v8.1
Freshly installed Windows 7 Professional SP1 PC Desktop
Freshly installed Samsung 1TB SSD running my OS and Adobe CC
Intel Core i7-2600k CPU at 3.4GHz (8CPUs) - Watercooled
16GB Ram (3gb allocated for other programs)
Nvidia GeForce GTX 570 4GB GDDR5 - 3.40.62 Drivers installed
Pulling media from 2x 3TB Seagate Barracuda 7200RPM drives, striped at RAID 0
In this case pictured the second two clips in the sequence linked into AE, but the first wont show up in my monitor.

Thank You, Jim -
Unfortunately that specifically did not work.
Based on another comment sent to me, here is what did.
In PProCC
File > Adobe Dynamic Link > New After Effects Composition
In AECC
From that composition created from PPro, I imported the project (aep) initially created in AECC from another team member. Saved the file.
Back in PProCC
File > Adobe Dynamic Link > Import After Effects Composition
Magic.

After Effects CC won't connect to Dynamic link

Hello,
I am getting an error when starting After Effects CC saying that it can't connect to Dynamic Link. I have read over the threads for this error, but my firewall is off I have removed the third party codecs from Library/Quicktime. This worked once, but then went back to getting the error.
I updated to the most recent version of OS X and after that I get a dialogue box when launching a project saying it has conected to untitled.ppj with a cancel and OK button. the OK is grayed out, and if I hit cancel, After Effects hangs.
If I launch a Premier project with linked After Effects compositions those never load.
I am running OS X 10.8.5 and Adobe updater says everytihing is up to date.
there are two adobeQT32 processes running in activity monitor (and two crash daemons as well)
I was wondering if anyone had any other suggestions for trying to fix this. Thanks.
Patrick

thanks for replying , yeah i cant seem to find any solution maybe i will try and contatc adobe techinical support on monday , although they might just say to reinstall everthing as well . Thanks Anyway

The procedure entry point QTCF_CFHTTPMessageSetHeaderFieldValue could not be located in the dynamic link library QTCF.dll.

The procedure entry point QTCF_CFHTTPMessageSetHeaderFieldValue could not be located in the dynamic link library QTCF.dll.
I installed iTunes, then quicktime. After I installed quicktime, I began seeing this pop up everytime I opened iTunes.
iTunes works, this just appears everytime I open it.
I completely uninstalled every apple software on my laptop, then reinstalled everything.
Nothing happened, still the same.
Windows 7
64Bit

Hi,
I have exactly the same problem as the OP. To answer some questions:
I only have one copy of QTCF.dll.
It is in the correct place.
I have deleted it and repaired QT to replace it several times.
I have tried different versions of QT.
Win 7 Pro 64
I ran SysInternals MS Process Monitor to see what was going on. All programs which call this DLL were looking for it in their root directory, which suggested to me that the registry entry was either missing or corrupt, so...
I ran Regsvr32 on the dll and received the following Windows message:
"The module "qtcf.dll" was loaded but the entry-point DllUnregisterServer was not found. Make sure that the "qtcf.dll" is a valid dll or OCX file and then try again"
Now I'm out of ideas.
Cheers,
Tony

I am having trouble updating the operating system on both my ipad and iphone. I get a strange message when I open my PC desk top that says "the procedure entry point sqlit3_wal-checkpoint could not be located in teh dynamic link library SQLite3.dll"

I am having trouble updating my operatI am having trouble updating the operating system on both my ipad and iphone. I get a strange message when I open my PC desk top that says "the procedure entry point sqlit3_wal-checkpoint could not be located in the dynamic link library SQLite3.dll" Any ideas what my problem is?

Hi whatsthe77,
Welcome to Apple Support Communities.
You may want to follow the steps in this article to reinstall iTunes:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Have a great day,
Jeremy

Tried to upgrade and after uninstalling and reinstalling several times, keep getting "procedure entry point could not be located in dynamic link library" followed by "iTunes was not installed properly" Error 7.....Help, please??

Tried to upgrade as instructed and after uninstalling and reinstalling (even back to the former iTunes which I was happy with)several times, keep getting message "Procedure entry point could not be located in dynamic link library" followed by "iTunes was not installed properly" "Error 7". Help, please??

Entry point errors can usually be fixed by deleting the offending dll, then repairing the component it is part of from the programs and features control panel. Unfortunately you neglected to include the detail of which dll is mentioned.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

I need help. every time i turn on my laptop an error message pops up: the procedure entry point sqlite_wao -checkpoint could not be located in the dynamic link library SQLite3.dlll HOW DO I FIX THIS?

i need help. every time i turn on my laptop an error message pops up: the procedure entry point sqlite_wao -checkpoint could not be located in the dynamic link library SQLite3.dlll HOW DO I FIX THIS?

Hi whatsthe77,
Welcome to Apple Support Communities.
You may want to follow the steps in this article to reinstall iTunes:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Have a great day,
Jeremy

TS4123 Error message that read " The procedure entry point salite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll."

Dear All,
I've receive a error message that read " The procedure entry point salite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll."
Due to this had cause me unable to back up my iphone. Please advice how can i reslove this.
This happens after I install Sumsung application on my PC.

Hi whatsthe77,
Welcome to Apple Support Communities.
You may want to follow the steps in this article to reinstall iTunes:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Have a great day,
Jeremy

AppleSyncNotifier: The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library QLite3.dll.

I just downloaded and installed the latest iTunes and Safari update. It required a reboot, and after the PC restarted I was greeted with this error message:
AppleSyncNotifier: The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library QLite3.dll.
First time to ever see this one. I can only presume that it is a bug. But any help to correct the problem will be greatly appreciated.
TIA

I received a note to do the regular Apple Software Update for iTunes, Quicktime and Safari, then I faced a big problem from that exact same messages, I could not sleep, and I could not go to work and I cannot make any phone calls.
I did not imagine that one day I'll see this intransigence and irony Carried out by Apple with humans, this makes us lose confidence in their products. Because they are interested in selling their products only and do not provide any service to their clients. And to help us solve problems that result from the method of maximum protection of their software. But I think that there is no any point in calling them and asked for their help and support. Where they do not show any initiative to help resolve the problemsThis indicates that they intend to do that, Believe it or not this problem has caused great damage and loss to me, Since I had 4 iPhones, And all my friends advised me to get rid of them and sell and never buy this products again, even if selling them at a loss because the Apple company abandon its responsibility to serve and assist their customers by support

AppleSyncNotifier.ex-Entry Point Not Found message, "the procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQlite3.dll.

After an update, every time I start my computer (that uses 64-bit Windows 7), there is an AppleSyncNotifier.ex-Entry Point Not Found message, "the procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQlite3.dll. I have checked and tried suggestions to resolve this from this site and several other places with no success. Appreciate advice how fix and resolve this

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

Error message procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll

I keep getting error message: The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.

Hi whatsthe77,
Welcome to Apple Support Communities.
You may want to follow the steps in this article to reinstall iTunes:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Have a great day,
Jeremy

Dynamic Link Media Server Error On Video Export Photoshop CC 2014

Dynamic Link Media Server Error On Video Export Photoshop CC 2014

Hi,
Are you still having problems with CS6 Video Export?
What Export settings are you using? (A screencapture might be the fastest way to answer that.)
Does it work if you use the default settings?
If you have time to experiment, I have some suggestions:
Would you please try/verify the following:
1. Be sure virus/security/parental control software hasn't trapped parts of Photoshop, Bridge, Premiere, Lightroom, or any Adobe app using DynamicLinkMediaServer. (Make sure the Adobe apps are added as exceptions if needed.)
2. Ensure you have the latest version of QuickTime
3. Close all Adobe applications - wait more than 30 seconds, then launch Photoshop and try to open and export the file.
- If unsuccessful, view Task Manager/Processes to verify necessary processes started up when importing video (dynamiclinkmanager.exe, dynamiclinkmediaserver.exe and Adobe QT32 Server.exe)
- If unsuccessful, please capture the full error message text.
4. Close all Adobe apps, wait 30 seconds - launch Bridge and try to open/export the file.
Thanks,
Meredith

Import Error: Connecting to Dynamic Link Server Failed

Just tried to import file sinto a brand new LR Catalog when I got this message...here's the entire error message:
"An unknown error has occurred while reading the video file. Connecting to Dynamic Link server failed. (98)"
Connecting to Dynamic Link Server Failed
this was then followed by a list of files of these types:
.mov
.m4v
.3gp

I've read several threads about this problem (because I had it myself) and what worked was closing Lightroom, uninstalling Quicktime, restart Lightroom, ignore the "you have to have quicktime" message, and import the videos. Then I reinstalled Quicktime.
But, I think the problem isn't quicktime itself; I think it's something to do with iTunes. During Quicktime uninstallation, it said that iTunes was open. I disagreed, but Task Manager showed the process still running. I had to kill it manually to complete the uninstall.
So, just a thought, maybe check to be sure iTunes isn't running before trying the Lightroom import? One never knows....

Dynamic link to Quicktime

Similar Messages

Maybe you are looking for