Logon screen during transport of a change request

Hi Gurus,
When I have do a transport of a change request from our development system to our quality system some users get a logon screen and some users not.
I think it's because of some authorization.
Can anybody tell me which role I need ??
GJ

Hi
some users have permission to import transports (Auth object S_CTS_ADMI) in the target client.
If another user has no authorization, charm tries to import via client 000 -> logon screen appears if current user has no permission to logon via trusted rfc to client 000
Another possibility is to give user TMSADM the authorization to import in client 000. So all users can import.
regards andy

Similar Messages

Default transport under Local change request

Dear Friends,
I am trying to transport objects from dev to QAS. i catch hold of the object, create transport request. By Default they are getting assigned to Local Change Requests instead of being assigned to Modifiable requests under target system. (in SE09)
how can i change the default from local change request to Quality.
Regards
Paddy

Thanks Edwin,
this is what i am doing now. But, by default i want it to be set in Quality--> Modifiable.
Everytime going to settings and changing it does not seem to be a permanent solution.
Request your earliest response.
Rgds.

Attaching a screen to SDHF & SDCR. ( change request )

I have created a screen using EEWB .Now,can anyone suggest me how to attach that screen with SDHF as well as SDCR transaction??
Points will be rewarded.

hi satish thanks for reverting back
but sorry yaar given enhancement is not triggering...
but my requirement is:
- after executing the transaction MM02 & CS02.
- user inputs the data for Material Number and then he enters the Change Number.
- if the given Change Number is not maintained with the Material (i dont no
where/how this two fields are maintained internally), then it has to raise a
warning and it should list the existing Change Numbers for that perticular
Material.

Long DDIC Activation for Master Data Change During Transport

Good Morning Folks,
During transport of a change to a custom master data object to production, the data dictionary activation is taking a very long time and using a very large amount of space.
The change to the master data object was adding three additional navigational attributes. This master data is not time-dependant. The master data contains about 1.2 million records and has 49 active navigational attributes u2013 including the three new ones. The Data Dictionary activation is executing report SAPLRSDU for more than 8 hours and is using upwards of 52GB of temp filespace (of 92GB allocated) during this time. To the best of our knowledge, it looks as if it is trying to recreate or repopulate the /BIC/Pxxxx table of the master data. It looks like it's reading billions of records (probably the same 1.2 m records over and over.)
There are no errors in any logs that we can see.
Previous changes to this master data object have been successful, and reasonably fast. And the transport of this change from Dev to our QA environment was very fast.
We still need to get this change in, as well as additional changes that are dependant. Why would this take so long, and is there anything we can do to get this to run faster?
BTW: We are on 3.5 (but looking forward to NW7.)
Thanks, Brian

Brian,
Usually adding nav attributes would mean that the X and y tables get regenerated...
Also do you notice reads only on the P-Table or other tables which have this object as well..?
If it is only the P Table - try refreshing the stats for the same...

Transports and Change Request

Hi Gurus-
Can some one tell me a simple scenario including following terms. I needed this as I am unable to picture everything together when I read documentation about these.
1. Transports
2. Change Request
3. Task
4. Package (Transportable)
5. Creating a Change Request (who will do this normally, as a developer how do I get this)
6. Releasing Change Request
7. Collecting Objects
Plese take a simple scenario like adding KF to a infoCube or changing a report.
Thanks in advace, points will be awarded.
Message was edited by:
PUNZU

Please see my comments below.
1. Transports
Generally used to transport changes from development to QA to Production. Direct changes in Production is not advisable. Hence we make use of this tool.
2. Change Request
A change request/transport request stores all the objects you are changing and assigning them to this request. Any further changes to these objects will automatically be captured in this request.
3. Task
Generally, when a second user changes the same object which is captured in a request, a task is created under that request. However, when you release request, the final change gets transported. You need to release task before releasing a request.
4. Package (Transportable)
You define a group of objects as package just for identification purpose. For example, for workbench objects like cubes, I/O, ODS, you define workbench package. Whenever you are using transport connection from rsa1, and capture the objects in a request, you must assign each and every object to a particular package. There is no hard and fast rule of define packages. It is just for identification purpose.
5. Creating a Change Request (who will do this normally, as a developer how do I get this)
Generally, you as a developer should do this. Whenever you are making some change to an object and activating it, it will ask for a transport request. Otherwise, you can also drag and drop individual objects and select them and transport using transport connection tab in RSA1.
You can see the transport requests that you have created in transaction se09 or se10.
6. Releasing Change Request
Right click the request in se10 and click release.
7. Collecting Objects
You need to collect in target server. Generally, in most of the places, this process is automized with a workflow. you don't need to take care of this.
Hope this helps(something different from the things available in documentation).
Regards,
anup

How to display a specific SAP logon screen per system?

Hello,
I woud like to display a logon screen which contains system-specific information, e.g. for the QAS system it would be something like "This system was created by a system copy from PRD on MM/DD/YYYY"...
I have gone through the SAP Note 205487 and my understanding is that I have to create the ZLOGIN_SCREEN_INFO in the development (changeable) system and transport it.
Note 205487 : "Creating/changing this text requires a changeable system. Therefore, for production systems, SAP recommends maintaining the text in the upstream system and then transporting it."
Can anyone please provide me with some hints on how to create a different logon screen for each system and apply them via transport requests?
I prefer not to "open" the QAS system in order to create the logon screen because I would then have to "open" the productive system to create a different logon screen...
Any help is appreciated.
Thanks and Regards,
Michel M.

Hi Michel,
Please refer to below documents for modifying SAP Logon screen and transporting to other system.
[How to customize the login screen|http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=22219]
[Customizing SAP Login Screen|http://www.abap-tutorials.com/2009/12/30/customizing-sap-login-screen/]
[SAP logon screen, SE61, ZLOGIN_SCREEN_INFO|SAP logon screen, SE61, ZLOGIN_SCREEN_INFO;
Hope it helps
Regards
Arun

Domain based windows 7 default picture on logon screen

haven't found an answer to this question although its been asked often in past; in our domain environment, would like to have a non-blank default user picture image on Windows 7 logon screen; we do not retain our previous logon user information when workstation
restarted; have found way to change background wallpaper for that logon screen but no way to change that blank framed image,
thx

Hi,
Do you mean to set the default User Logon Picture?
If yes, please take a look of the steps mentioned in the below article:
How to set a default user logon picture for all users in Vista, Windows 7 and Windows 8
Please Note:
Since the web site is not hosted by Microsoft, the link may change
without notice. Microsoft does not guarantee the accuracy of this information.
If any questions, please feel free to let me know.
Best regards
Michael Shao
TechNet Community Support

Portal Run time error after changing the logon screen

Hi all,
I am running an EP7 SP08 and I try to change the logon screen as described on:
http://help.sap.com/saphelp_nw2004s/helpdata/en/23/c0e240beb0702ae10000000a155106/frameset.htm
I copied the 'com.sap.portal.runtime.logon.par.bak' file, renamed it to 'my.new.logon.par'. after that I extracted the file with winzip. I opened the directory 'PORTAL-INF\lib\' and there I extracted the file 'umelogonbase.jar' with winrar. I opened the file 'logonLabels_en.properties' and changed the entry 'xtit_WELCOME=Welcome' to 'xtit_WELCOME=blablabla'.
I repacked the umelogonbase.jar with winrar again and after that I repacked the 'my.new.logon.par' with winzip again.
Then I placed the par file back at '<J2EE_Engine_Instance>\j2ee\cluster\server<X>\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\deployment\pcd' and changed the authscheme.xml with the new par file and changed the 'login.authschemes.definition.file' all described on the help.sap.com url mentioned above.
However, when I restart the portal and open the logon screen I see the error message:
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
The exception was logged. Inform your system administrator..
See the details for the exception ID in the log file
The default trace shows the following message:
An error occured during authscheme computation.
[EXCEPTION]
com.sapportals.portal.prt.component.PortalComponentException: Error in init method
Component : my.new.logon.certlogon
Is there anyone who knows what goes wrong? The description on help.sap.com is very straightforward but still it doesn't work for me...
Any help would be appreciated.
Kind Regards,
Nico van der Linden...

Hi,
Check if you did the following steps pertaining to the authschemes.xml file:
--> Download the authschemes.xml to local drive. Rename the file to,say, authschemes_new.xml
--> In authschemes_new.xml, did you change <b>all</b> entries of com.sap.portal.runtime.logon with the name of modified logon par file?
-->Upload the authschemes_new.xml file using configtool; and, change the property login.authschemes.definition.file to authschemes_new.xml in configtool.
-->Finally,restart your portal. Hope it helps.
Regards,
M.Subathra

Changing Logon Screen WebAS ABAP: image for header

Hallo,
we would like to change the default logon screen of a WebAS ABAP 7.0 service (CLPBID - APO Collaborative Transportation Planning). The problem is the image for the header (SICF, service, tab error pages, tab logon erros, configuration, adjust links an images).
When we enter - for testing purposes - the URL "/SAP/PUBLIC/BC/Webicons/w_approv.gif", the GIF is displayed correctly. When we choose the URL "/SAP/PUBLIC/BC/Icons/s_aanode.GIF", the GIF is missing. We also created a new folder (SE80, MIME repository), e.g. "/SAP/PUBLIC/TEST" with a file test.gif. But this file is also not displayed on the logon page.
What is the difference between those folders. Are there any prerequsites for using other folders in the URL field? Security concerns? For claritys sake, we would like to create new folders with our own ressources...
Thank you very much
Sven Westenberg

We have not found a satisfactory solution up to know. We chose the WebIcons folder....
CU
Sven

Dependency Information for Transport Requests in Change Request Management

If two CTS projects are not assigned to SOLMAN projects, it is possible to define a dependency successor/predecessor relation between two transport requests for the import order. For example I can state that I have to import TR 1 only after the TR 2.
When the CTS projects are assigned to SOLMAN projects, even though you have defined the dependency relation, this is not respected and from the Change Documents you can perform the import in the order you want.
How can I activate this check also in Change Request Management?
Thanks
Antonello

Some things you could take a look on:
1) start report /TMWFLOW/CONFIG_SERVICES --> here you can define system, client and project specific locks.
2) Transaction /TMWFLOW/CMSCONF --> also some options for locks and definition of critical objects
3) Transaction /TMWFLOW/LOCKMON --> monitor screen for locked objects and requests.
This is actually not the same functionality as have it in CTS projects directly especially as the locks are removed once a request is removed. The most important thing is still missing here (or at least I haven't found a way to activate): sequence control when importing requests out of parallel projects into production (to prevent downgrading).
Best Regards,
Andy

Transporting a change request created in SNOTE

Hello all,
I'm fairly new to all this so hopefully there's an easy solution to my problem. I've implemented an OSS note correction in our BW development system via transaction SNOTE. This worked fine and during this process I was prompted to create a new local change request and did so. My problem comes when I'm trying to transport this request to our BW QA system. I released the request in development but when adding it to the transport queue in QA I get an error:
"Transport control program tp ended with error code 0247"
Our transport system is currently working normally so I think the problem is with the request. Does this change need to be in a Customizing request or a Workbench request? Please advise.
Thank you.

Hi Ganesh,
Can I ask something about inactive object here?
I applied notes with SNOTE. But all objects are inactive.
When I activete them, The system requires accesskey.
How could this happen? And any solution for this?
I can't deapply the notes any more. coz it's bug fix for SNOTE.
If I do this, the system will be inconsistent, this happened beffore
Thanks
kaz,

Change Request Management - Transport Request reimport

Hello,
I have read in a forum on SDN about the following behaviour of Change Request Management in case of a Maintenance Project: after completing import to production environment through Normal correction, when the same maintenance cycle
is used again, ChaRM reimports all the TP's imported in the previous run.
In case of an Implementation Project with Normal correction I guess that this can not happen for an import to Production environment, because it's not possible to use again the same cycle, is it right?
But if we consider the import to Test environment: for example, during a Project cycle, transport request TR1 is imported to Test environment, then cycle status is set again
to "In development" and a new transport request TR2 is created. Is TR1 re-imported, when TR2 is imported to Test?
Thansk a lot,
Stefano

Hi,
Whenyou import a normal correction as per the recommedations from SAP they are asking to de select keep for further imports options,so that when we import other request it will not import the older request.
Please revert for any clarifiaction,
Thanks and Regards,
Avinash.

My mac logon screen after sleep has changed?

So i just got a new macbook pro. This is the June 2012 model the last one before the retina model. When i close my compuer it sleeps, and when I open it there used to be a logon screen that looked like this: http://techblog.willshouse.com/wp-content/uploads/2012/11/os-x-mountain-lion-han gs-during-logon.jpg
Now, however, the logon screen looks like this: https://lh4.googleusercontent.com/-w-NQJwVoIi8/UPcRIZjnk2I/AAAAAAAAAFw/UluRW_3YS Lg/s640/photo.JPG why is this and how can i change it back? Thanks for your time.

Sounds like a setting has been changed in System Preferences > Security and Privacy
Do you have "Show a message when the screen is locked" checked? If so, uncheck it and see if you get that strange log in box again.

Change request save pop up screen not getting

Hi,
After upgrading BW 7.3 sp09, we are trying to save one query to another query name in query designer but we are not getting change request pop up screen to save perticular request and package.
Please provide your input ASAP.
Thanks,
Manjunatha.

Use tcode scc4 and check the following settings ................
Also have a look at this
http://scn.sap.com/community/business-explorer/blog/2013/11/14/how-to-create-bex-transport-request

Changing the look and feel of the logon screen and portal themes.

Dear all,
we got some requirements in the portal where i have implement the following things..
1) when we give the portal url in the browser along with logon screen i have to display the some content related to the organaisation ,,, there i want to do logon screen customization also.
2)once login to the portal i need display the some company related information along with different ESS services .i want to remove the masthead area and in the role area want to display different services.
please guide me to achive this.
the client is not at all happy with present look and feel,
so what we can do t achieve ths?
Thank you in advance.
Swapna

Hi Swapna,
Portalapp.xml is the configuration file of portal application holding comonents and services. Where as authschemes.xml file is used to determin and tell portal which of the user authentication schemes is to be used. It also tells portal about which logon PAR file should be used. It is defined inside following tags.
<frontendtarget>Logon PAR File Name</frontendtarget>.
Take a scenario for example. You have created a custom logon PAR file and made some changes. You cannot see the changes before deploying it. You have to deploy it first. Now, you want that whenever somone logon to portal, your logon PAR should be referred and executed. Authschemes.xml does this work. It maintains a reference to the PAR file that should be used for logon.
Now, still have to create a custom authschemes.xml file and upload it. (Follow this link for the authschemes file location http://help.sap.com/saphelp_nw04/helpdata/en/1a/3afd4e641b8f42ac07bb77fe30375b/content.htm)
Refer this link for details on authschemes.xml file: http://help.sap.com/saphelp_nw04/helpdata/en/d3/1dd4516c518645a59e5cff2628a5c1/content.htm
Let us see in brief what are the steps executed:
1) You request a portal login
2) Portal, after receiving a request, looks for a reference to which Authschemes file to be used. It finds it in Visual Admin
3) Once portal have the name of authschemes file, it parse this file and determin what are the authentication schemes to be used and which logon PAR should be executed.
4) Only after these steps, it renders logon page to you
Once you do all these steps, you can see the result on logon page itself. You do not have to look for deployed PAR file.

Logon screen during transport of a change request

Similar Messages

Maybe you are looking for