Dynamic Payslips for multiple employees?

Post Author: bhappy
CA Forum: Formula
Hi All,I need to generate pay slips for multiple employees using Crystal Reports.I can able to generate pay slip for one employee.But I can't generate pay slips for multiple employees.Can any one tell me any idea plz..............Thanks.

Post Author: bhappy
CA Forum: Formula
   Hi,Thanks for ur replay,Here i am not passing any
table to crystal report.All values i am passing to formula fields bcuz
all fields are dynamic i am not using any database field directly in my
crystal report.All calculations i am doing in code behind (earnings and
deductions calculations) so in code behind i will get one dataset with
all data to generate payslips(all dynamic data for all employees) but
formula field can hold only one value ???Any idea plz...........Thanks.

Similar Messages

  • Need to create a mass upload program for appraisal document creation for multiple employee

    Hi Expertise,
    I need to create a mass upload program for appraisal document creation for manager and his multiple employee
    at a time using tcode appcreate.
    Please help me out.
    Best regards,
    Priyaranjan

    Hi Priyaranjan,
    I think you can take the abap'ers help in creating the program. But u need to provide them the exact functionality and the required specifications in creating the appraisal document.
    Even tcode also u can get it prepared by Abap'ers.
    Thanks and Regards
    Balaji

  • Need to create a mass upload program for appraisal document creation for multiple employee in abap hr

    Hi Expertise,
    I need to create a mass upload program for appraisal document creation for manager and his multiple employee
    at a time using tcode appcreate.
    Please help me out.
    Best regards,
    Priyaranjan

    Hi,
    I have done appraisal document creation for bulk using txt file.
    this fm used for single for creation in standard tcode (phap_prepare):  'WZ_HRHAP_0DOC_WZ01_START'.
    So create ztcode  usinh this fm for single form then record BDC for this tcode and called this tcode in that bdc for bulk creation .
    While recording for single I have used manual option instead of automatic .

  • Travel request is created for multiple employee or multiple trip request

    Hi Experts,
    In our current application for creating Travel Request in offline scenario we are using function module  'FITP_CREATE_TRIP_FROM_REQUEST' to create the travel header data and 'FITP_UPDATE_REQUEST' to generate the line data.
    We are calling these two function modules from a report which is executed in background.
    The function modules are working fine single employee Id with single Trip request , but in case of single employee id having multiple Trip request or Multiple employee id ,each having  single trip request  , only the first trip is created properly and for all the successive trip we are getting an exception
    ' No trip data could be found for selected criteria'.
    What is the way to overcome the issue?
    please help.
    Thanks and Regards,
    Anirban B

    Hello,
    I am getting similar kind of issue please help me how you have solved this issue
    I will be really helpful if you respond
    Thanks and Regards
    Sarthak Arora

  • Dynamic select for multiple tables

    Hi Thanks for your reply.Can you please help me in this issue.
    I have a requirement like how to select data from multiple tables using dynamic select. How do we maintain dynamic where condition.
    Manohar.

    [How to write dynamic where clause|How to write a Dynamic Where clause]

  • Dynamic configuration for multiple files

    Hi All,
    I am new to PI. I have a proxy to file scenario, wherein 3 files are to be generated depending upon the value in a field (site ID) on the same receiver. Site ID can only have 3 different vales. All these 3 files are to have a dynamically defined name.
    How can I configure this scenario? Is there any way in which all 3 files can have dynamically defined names? Please help.
    Regards
    Vipul

    if you have only one recored (one site id) in proxy at a time, thn u can write a UDF for dynamic file name..
    // UDF: public String SetFileNameDyn(String siteID, Container container) throws StreamTransformationException{
    DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
    DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
    String myFileName = "";
    if(siteID.equals("firstValue")){
         myFileName  = "FirstFile1";
    }else if(siteID.equals("secondValue")){
         myFileName  = "SecondFile2";
    }else if(siteID.equals("thirdValue")){
         myFileName  = "ThirdFile3";
    conf.put(key, myFileName);
    return myFileName;

  • Displaying dynamic form for multiple players

    I am trying to dynamically display a form based on the number
    the user chooses. For instance, the user is register his/her child
    for soccer. I have a form that asks all the parent/guardian
    information and the player info. If the parent/guardian chooses to
    register 2 or more, I need to duplicate the player form. I can use
    a span tag and innerhtml, but that seems very tedious in
    javascript. Is there a better way to dynamically create the form
    for player 2, player 3, ...? I would like to do it all on the same
    page without the user gong to the next page. Your help is
    appreciated.
    Thanks,
    Scott

    In regards to tedious client side JavaScript, there are
    bunches of canned scripts available that you can modify.
    Here's one example;
    http://javascript.internet.com/forms/dynamic-input.html
    One of my favorites is deepgrid
    http://www.geocities.com/deepgrid/.
    I wrote a custom tag wrapper for the deepgrid code awhile
    back
    http://www.intersuite.com/client/index.cfm/2005/8/30/ColdFusion-custom-tags-for-Javascript -based-DeepGrid-UI
    http://www.intersuite.com/client/index.cfm/2005/9/28/cfdeepGrid-Custom-tag-for-deepGridjs
    Another solution would be to go the AJAX route where the user
    stays on the same page, they click submit, AJAX goes out and
    submits the info and refreshes the registered list below the form.
    One of the easiest API's is JSMX (
    http://www.lalabird.com/ )

  • Absences not deducted from Absence Quota for One Employee

    Dear Friends,
    I am facing an issue for one employee, when I recorded an Annual Leave absence to him, it is not updated in his Absence quotas infotype. But this is working fine for all other employees in the same employee group/subgroup grouping.
    But for Sick Leave absence type, it is updating in his absence quota records...
    I have checked the counting rules, deduction rules, base entitlement rules and other configuration settings.......It is fine and for other employees belonging to the same grouping, it is working fine, except this employee...
    I couldn't understand what will be the reason? Can anyone shed light on this issue?
    Thanks in advance,
    Sai Narayana,
    SAP Functional Consultant.

    Hi JS,
    I am checking the absence is deducted or not from his entitlement in the infotype 2006 after running the payroll for that month......
    The employee has taken leave on last month and the payroll is also run for that month.......This Absence is not deducted from his quota......
    I have checked for another employee in this department, no error/issue with that employee.......Only with this employee I am facing problem.....
    I found -
    1. The Absence Quota balance which is present in Infotype 2006 is not the same which is displayed in Remuneration Statement ( leave balance is displayed in payslip for every employee)
    2. Annual leave is not deducted from the employee's entitlement where as sick leave is deducted. I have checked the deduction rule too for this grouping, it is right.No issues in that.
    3. Absence Quota generation also produced different results when run time evaluation thru PT60.....which is not according to the entitlement to this employee grouping that too for this employee only.
    Or Friend, can you tell me some other option, to overcome this issue.....instead of repairing this all the time.......
    Thanks,
    Sai

  • Dynamic where clause for MULTIPLE values

    In the following of dynamic where clause?
    i have some somewhat different problem.
    Is a dynamic where clause for multiple values possible?
    If the inputvariable varCode1,varCode2,varCode3,varCode4 are 0 then show all id's otherwise filter the resultset on var1 and/or var2,and/or var3,and/or var4.
    Example table:
    create table t
    (d int,var int);
    insert into t values (1 ,1 );
    insert into t values (2 ,1 );
    insert into t values (3 ,2 );
    insert into t values (4 ,3 );
    insert into t values (5 ,4 );
    insert into t values (6 ,4 );
    insert into t values (7 ,4 );
    insert into t values (8 ,4 );
    insert into t values (9 ,5 );
    insert into t values (10, 6);
    insert into t values (11, 6);
    So what i want to change the where clause upon the value of the varCodes. If var1 and var are not 0 a "AND" should be used otherwise an "OR"
    select id
    from tst
    where var = DECODE( :varCode1, 0, var, :varCode1)
    or/and(?) DECODE( :varCode2, 0, var, :varCode2)
    or DECODE( :varCode3, 0, var, :varCode3)
    or DECODE( :varCode4, 0, var, :varCode4)

    Please turn off your Caps Lock
    and try this link
    Dynamic WHERE clause

  • Multiple entries for single employee in salary posting document

    Hi All,
    Require your help badly in sorting out an issue.
    For a particular provision, for ex - Prov for LTA, it is observed that multiple entries appear in salary posting document for a single employee. It is the case for other provisions too like LTA, Gratuity for numerous employees.
    Account Number with Text                  Wage Type   Pers.No.       Credit Amount      Crcy
    14520      PROV FOR LTA-CY            9LTA LTA      700002         11,902.00             INR
    14520      PROV FOR LTA-CY            9LTA LTA      700002         12,984.00             INR
    14520      PROV FOR LTA-CY            9LTA LTA      700002           3,636.00             INR
    Could you pl help me identify the reason and sort out the same.
    Thanks
    Amitava

    Hi,<br>
    How have you configured the 9LTA's provision? Is it any standard functionality for PY-IN or custom?
    Good luck<br><br>
    Thanks,
    Amosha
    <br><br>"Known is a drop & unknown is an OCEAN!"

  • How to make RECORD for saving multiple rows for each employee..

    Hi,
    How can I create a record for saving multiple rows for each employee... (parent child relationship)
    I have created all required fields, then created a record, and then created a page. in that page i dragged-n-dropped a scroll area on that page and dropped all required fields from record into that scroll-area.
    whats is happening that its saving ONE (the first) record fine, but for the second record its not storing EMPLID for that row..
    Will I have to make some change at RECORD level ?
    OR Will i have to make some configuration in parent component ?

    Hi, the problem is solved. The record will be created in same way. just create more then one keys (allowing to make composite key in DB table)

  • Headcount report when multiple position for an employee at particular time

    Hi
    I have to develop a headcount report which will show the employee count by each personal area. Now i can simply bring in headcount data from the R/3 by standard source system. My problem is that one employee can have multiple position at a time. In standard routine every record is assigned headcount by 1. Now problem is that there are multiple records for an employee as multiple position are assigned at the same time which will lead to wrong headcount.
    Thanks
    Kamal

    Hi Kamal,
    Can you write your report off of 0EMPLOYEE or did you change the key to include position?  Just include employee group and employment status to determine who your active employees are. 
    Brian

  • Creation of Multiple Activities for same Employee,same day and same time

    Hi Experts,
    In CRM 2007 I am creating an Activity(e.g Customer Visit) for a particular day for a particular employee. I am selecting the Option "Whole Day".
    When again I am creating another Activity same day and for same employee the ideally system should not allow me to create further activities as I have already scheduled for the whole day but its is allowing me to create as many activities i want irrespective of Time frame.
    I want to block overlappped activities created for  same emloyee same time.
    Can you please suggest me with your ideas inorder to achieve same???
    Regards
    Arup

    Hello,
    If there is no standard solution you can implement the BADI : CRM_ORDERADM_H_BADI
    Here you can see when a new activity is created, and then maybe you can cancel the creation or even replace the new activity by the existing one.
    Regards,
    Benoî

  • Multiple Holiday Calendars for an employee

    Hi
    We have a requirement, where an employee works for various clients in a month/year. Whenever he moves to a new client, that client holiday calendar should replace the existing for that period only.
    Eg: Client XYZ has holiday calendar1, calendar 2, calendar 3 in location 1, location 2 location 3 respectively...
    If employee is in location 4 with calendar 4, Supports the client XYZ location 1 his calender 4 should be replaced by calendar 1 for that employee.
    Regards,
    SB

    In this case employee is not physically moving to a different location, from the same location1 he can support client 2 or client.  and moreover Clients and client locations cannot be a part of Enterprise structure.
    In my opinion, this is not a simple scenerio, it certainly needs some development

  • Dynamic logo doesn't appear for multiple outbound payments in IBY

    Product: BI Publisher 10.1.2.3
    Oracle Payments (IBY) 12.1.3
    Logo for each organization on check printing appears correctly for single outbound payment but for multiple outbound payments, it doesn't appear. Any help would be greatly appearciated.
    Thanks,
    Amjad

    Product: BI Publisher 10.1.2.3
    Oracle Payments (IBY) 12.1.3
    Logo for each organization on check printing appears correctly for single outbound payment but for multiple outbound payments, it doesn't appear. Any help would be greatly appearciated.
    Thanks,
    Amjad

Maybe you are looking for