Dynamic selection screen for custom ABAP report

Hi,
His it possible to create a custom ABAP report with a dynamic selection screen. The report doesnot use a logical database. If possible sample code will be appreciated.
Regards,
Chandra Kumar

hi
use this link
Dynamic selection screen
Cheers
Snehi

Similar Messages

Want to have own selection screen in HR-ABAP report using LDB

Hi experts,
        I am working on HR-ABAP report using LDB pnp and infotypes..But, here we get the built in selection criterion..but I want my own selection screen to be displayed..whats the solution for this??? Is it possible to create my own selection screen instead of default one..and how???
Please help me..its very urgent..

Hi,
chk this out:
Create Report Categories
In this step, you define the report categories and determine the layout
   of the standard selection screen for these report categories. You can
   create report categories for programs or queries that are based on the
   PNP or PNPCE logical databases.
The definition of report categories is divided into two sections:
o   In the Change Report Category view, you define general attributes
       such as sort order, input fields for date, and so on.
o   In the Change Selection Criteria view, you define which selection
       fields of the logical database should be avaliable on the selection
       screen.
Example
You want to set up your system so that your employees can only start
   evaluation reports for Payroll if they use a payroll area. Within a
   payroll area, you should be able to select according to personnel
   number. Additional selection criteria should not be possible and you
   should not be allowed to enter a sort sequence.
Standard settings
The standard system already contains report categories. You can find the
attributes of the report categories in the table.
Note the following five report categories in particular:
o   Report category ' ' is the SAP default report category for
    programs that are based on the PNP logical database.
o   Report category PNPCE is the SAP default category for programs that
    are based on the PNPCE logical database.
o   Report category '00000000' is the customer-specific default category
    for programs that are based on the PNP logical database.
o   Report category '0PNPCE' is the customer-specific default category
    for programs that are based on the PNPCE logical database.
o   Report category __X2001 is the default category for Queries that
    are based on an InfoSet of the PNP LDB.
o   Report category QUEPNPCE is the default category for queries that
    are based on an InfoSet of the PNPCE LDB.
The default report categories are used when a report is called if
    the report has not been assigned a report category.
Parameters and Options for Report Categories of the LDB PNP and PNPCE
Parameters and Options in Screen Area General Data
   If you activate this parameter, you can only enter data on the data
   selection period if you use reports that have been assigned. The
   same date entries are then used for the person selection as for the
   date selection.
o   Matchcode allowed
   If you activate this parameter, you have use of a Matchcode
   pushbutton (search help) if you use reports that have been assigned.
   This pushbutton enables you to perform the person selection.
o   Sort allowed
   If you activate this parameter, you have use of a Sort pushbutton if
   you use report that have been assigned. This pushbutton enables you
   to define a sort order before you execute the report.
o   Organizational structure allowed
   If you activate this parameter, you have use of an Org.Structure
   pushbutton if you use reports that have been assigned. This
   pushbutton enables you to perform the person selection.
   Note:
   For more information about these options, see the online
   documentation under this path:
   SAP Library -> Human Resources -> Reporting in Human Resources
   Management -> Standard HR Reports -> Report Selection Screen in
   Human Resources Management.
Parameters and Options in Screen Areas Data Selection Period/Person
Selection Period/Payroll Area/Period/Year
o   Options for data selection period and person selection period (key
    date and so on)
    Here you define which options for date and person selection are
    available for reports that have been assigned.
o   Options for payroll area/period/year
    Here you define which options for selection using payroll
    area/period/year are available for reports that have been assigned.
Parameters and Options in Screen Area Selection View
o   Type/Name
    This parameter enables you to use selection views to define report
    categories. You use the selection view selected here to determine
    which fields are available in the Dynamic Selectionsy.
Note:
    You create selection views for the PNP and PNPCE logical databases
    in the Object Navigator (SE80):
    1. Start the Object Navigator (SE80)
    2. Choose Workbench -> Edit Object.
    3. Choose the More... tab page and the Selection view on this tab
    page.
    4. Choose Create.
    5. In the Create Selection View dialog box, choose the For any
    tables option.
    6. In the Name of view field, enter a name for your selection view.
    7. In the Tables dialog box, enter the name of the table from which
    you want to use fields.
    Note:
    When you enter the table name, observe the naming convention in
    Personnel Administration:
    Infotype number: nnnn -> table name: PAnnnn
    8. Choose Continue.
    9. In the Functional groups area, define functional groups by
    assigning a name and a number.
    10. Assign fields from the selected tables to the functional groups
    by entering the number of the desired functional group in front of
    each field.
    11. Save your entries.
For more information about adjusting the dynamic selections using
your own selection views, see the online documentation under the
following menu path:
SAP Library -> Human Resources -> Reporting in Human Resources
Management -> HR Standard Reports -> Report Selection Screen in
Human Resources Management -> Enhancing the Selection Screen -
Dynamic Selections.
If you do not want to offer dynamic selections, make the following
settings:
-   LDB PNP: In the Selection view field, enter PNP_NO_FREE_SEL.
-   LDB PNPCE: Leave the Selection view field empty.
Parameters and Options in Screen Area Data Selection Period/Person
Selection Period/Payroll Area/Period/Year
o   Available input parameters, date or period entry (today, key date,
   all, and so on), and standard value.
   Using the Standard value option, you define which of the selected
   options is shown.
Parameters and Options in Screen Area CE Selection Fields
o   CE selection fields (external person ID, grouping reason, grouping
   value)
   Using the options in this area, you define whether the external
   person Id, grouping reason, or grouping value are available on the
   selection screen.
   Note:
   These parameters are only relevant for you if you implement
   Concurrent Employment (see also note 517071).
Parameters and Options in Screen Area Selection view
o   Dynamic selections as dialog box
    If this switch is set, you can call the dynamic selections as a
    dialog box.
o   Dynamic selections active
    If this switch is set, the dynamic selections of the logical
    database are active at the start of the report.
Note that the following combinations are possible for the last two
    options mentioned:
Dyn.Sel. as dialog box/Dyn.Sel. active: inactive/inactive
    Dyn.Sel. as dialog box/Dyn.Sel. active: inactive/active
    Dyn.Sel. as dialog box/Dyn.Sel. active: active/inactive
Activities
1. Choose Edit -> New entries.
2. Enter an abbreviation and a long text for the report category.
    The customer name range for report categories is 0-9.
3. Select the For the PNPCE logical database checkbox, if you want to
    create a report category for a program or for queries of the PNPCE
    logical database.
4. In the General Data screen area, choose the desired options.
    If you want to use selection IDs, you must have first created and
    grouped selection Ids. The IMG path to do this is given in the
    parameter description section.
5. In the Data selection period/person selection period or Selection
    period screen area, choose the desired options.
6. In the Selection view screen area, choose the desired options.
7. In the CE selection fields screen area, choose the desired (only
    possible for report categories of the LDB PNPCE).
8. Save your entries.
9. Choose the subactivity Permitted selection criteria.
10. Choose Edit -> New entries.
11. In the Select option field, use the input help to select each field
    that should be available on the selection screen.
12. Select the checkbox in the 1.page column, if you want this selection
    field to be available directly when you call the selection screen.
Further notes
13. If you want to copy entries, you still have to enter the selection
    parameters again in the subsequent screen.
o   If you create the report category '000000000', a selection screen is
    generated according to report category '00000000'for all reports for
    which a report category has not explicitly been assigned.
Assign Report Categories
In this step, you assign a report category to your reports.
Example
You have created your own report, for example ZPCTEST1, and would like
    it to have the selection screen that corresponds to that of the
    evaluation report for Payroll, which is assigned to report category
    '__M00001'.
    Assign report category '__M00001' to the report.
Requirements
You must have defined the Report Categories.
Standard settings
SAP Standard Reports:
In the standard system, reports are assigned a report category. If you
    want to override these assignments, perform the activities described
    here. If you want to assign report categories to standard reports using
    SE38, this represents a modification.
Customer-Specific Reports:
For reports you have developed yourself, you can either assign report
    categories by performing the activities described here or directly in SE38.
Recommendation
Only assign a report category if you have created your own reports or if
the selection screens in the standard system do not meet your
requirements.
Activities
1. Choose Edit -> New entries.
2. Perform the required assignment using the Program name and Report
   category fields.
3. Save your entries.
reward if helpful
regards,
madhumitha

Dynamic selection screen for FDK43

HI All,
I need to add a field (accounting clerk - BUSAB)in the dynamic selection-screen of transaction FDK43.
I used se36 to view the current selection-screen view and it does show me the field accouting clerk under functional group - 04 (Company Code) .The field is ticked for preselect.
However I am not able to see this field (BUSAB) in the dynamic selection when I run transaction FDK43.
Any idea on how to make the function group 04 available for selection ? or maybe even the field in it available for selection ?
Regards,
Shital

hi
use this link
Dynamic selection screen
Cheers
Snehi

Selection screen for custom table

We have developed a custom table and user want to have a selection selection screen similar to SE16. There are 9 fields in the table and user can enter data to the selection screen with any combination. My question is how do I filter based on the user input ? DO I need to write multiple SQL for different combination of selection screen parameter within IF ELSEIF statement ? If so then there will be huge number of SQL within IF & ELSEIF statment for 9 selection parameter. Please suggest if you have any better ideas.

Even after using select-option along with IN statement in where clause , it did not work.
I used following selection screen defination :
SELECTION-SCREEN: BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-002.
SELECT-OPTIONS: P_PCBUS FOR MARA-ZZPC_BUSINESS NO-EXTENSION NO INTERVALS,
                P_PCBUS1 FOR MARA-ZZPC_BUS_SUB1 NO-EXTENSION NO INTERVALS,
                P_PLNFMT FOR MARA-ZZPLNG_FORMAT NO-EXTENSION NO INTERVALS,
                P_PRDB FOR MARA-ZZPROD_BRAND NO-EXTENSION NO INTERVALS,
                P_SEASCD FOR MARA-ZZSEASON_CODE NO-EXTENSION NO INTERVALS,
                P_SNP FOR MARA-ZZSUP_NET_PATH NO-EXTENSION NO INTERVALS,
                P_MAT_DC FOR MARA-MATNR NO-EXTENSION NO INTERVALS,
                P_MAT_MG FOR MARA-MATNR NO-EXTENSION NO INTERVALS.
SELECTION-SCREEN: END OF BLOCK B2.
and SQL statement :
SELECT ZZPC_BUSINESS
      FROM ZTB_RTL_TO_WHS
      INTO TABLE TA_ZZPCBUS
      WHERE ZZPC_BUSINESS = P_PCBUS
      AND ZZPC_BUS_SUB1 IN P_PCBUS1
      AND   ZZPROD_BRAND   IN P_PRDB
      AND ZZPLNG_FORMAT   IN P_PLNFMT
      AND ZZSEASON_CODE   IN P_SEASCD
      AND ZZSUP_NET_PATH IN P_SNP
      AND ZZD_MATNR       IN P_MAT_DC
      AND ZZM_MATNR       IN P_MAT_MG.
While executing program, I only enterd value for the field P_PCBUS. Though record present for that value, I rcvd SY-SUBRC = 4.
ANy Idea?
Edited by: J. Bakshi on Jul 14, 2009 10:17 AM

Variants on tabbed selection screen for ALV reports

Scenario: We use a tabbed selection screen for an ALV report. We create a variant, make a selection field on the second tab mandatory & save it without a value. When we run the report with the saved variant it does not check that the required field on the second tab is populated before it executes.
Question: How can I code such a check?
Edited by: Alridge Tom on Jul 4, 2008 3:43 PM

Hi,
try inserting this code apropietly in you program. (1 parameter + Initialization + At-selection-screen + 2 forms)
START HERE
PARAMETERS: pa_vari TYPE disvariant-variant.
INITIALIZATION.
g_repid = sy-repid.
CLEAR e_variant.
e_variant-report   = sy-cprog.
e_variant-username = sy-uname.
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
    EXPORTING
      i_save     = 'A'
    CHANGING
      cs_variant = e_variant
    EXCEPTIONS
      not_found = 2.
IF sy-subrc = 0.
    pa_vari = e_variant-variant.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR pa_vari.
PERFORM alv_variant_f4 CHANGING pa_vari.
*&      Form ALV_VARIANT_F4
FORM alv_variant_f4 CHANGING pa_vari.
DATA: l_exit(1) TYPE c.
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
    EXPORTING
      is_variant       = e_variant
      i_tabname_header = 'ANYTHING'
      i_save           = 'A'
    IMPORTING
      e_exit           = l_exit
      es_variant       = e_variant
    EXCEPTIONS
      not_found        = 2.
IF sy-subrc = 2.
    MESSAGE ID sy-msgid TYPE 'S' NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
    IF l_exit = space.
      pa_vari = e_variant-variant.
    ENDIF.
ENDIF.
ENDFORM.                               " ALV_VARIANT_F4
END
Hope iy helps!
Alfonso

How to add a new Field in the Dynamic Selection screen section.

HI,
There is a requirement in which I need to add a field in existing program of dynamic selections.
I need to add a field KNKK-DBRTG (Customer Rating) in dynamic selections screen of some existing report
which has a dynamic selection screen with other fields like customer account, company code etc. Along with this i need to add Customer rating field also in the selection screen.
I have used GET KNKK statement to select this in the Dynamic selection screen. But I need to make it appear
on the screen.
LDB used is the Customer Database.
I have added GET KNKK statement after GET KNA1 statement.
Can any one help me how we can make this rating field appear in the selection screen.
With the GET statement Credit control area Fields can be selected in the selection screen but I have to permanantly add the field in the selection screen.
Regards
Prashant Prabhu

Hi,
So you need that this new field have data in old records?
1.- If you are in BI 7.0 and the logic or data for that New field are in the same Dimension, you can use a Remodeling to fill it. I mean if you want if you want to load from a Master Data from other InfoObject in the same Dim.
2.- If condition "1" is not yours.
First add the new field, then create a Backup Cube (both cubes with the new field) and make a full update with all information in the original Cube. The new field willl be empty in both cubes.
Create an UR from BackUp_Cube to Original_Cube with all direct mapping and create a logic in the Start Routine of the UR (modiying the data_package) you can look for the data in the DSO that you often use to load.
To do that both cubes have to be Datasources ( right click on Cube-> aditional function-> and I think is "Extract Datasource")
Hope it helps. Regards, Federico

Need to disable one of the select-options in dynamic selection screen

Hi,
we have copied the Standard program: RFDOPR00 into Z, my requirement is to disable one of the select-options in dynamic selection screen for ex: Reason code(User shouldnot able to enter anything in it).
Can anyone please tell me the procedure to do it... I had tried using at selection-screen but it doesnt work as it in 'LOOP AT SCREEN', i am not able to capture the Parameter name(screen-name).
Thanks,
Ravi

Hi,
Get inside your selection screen, by executing your program.
Now type /h in the field where you enter transaction code and press enter.
Now again press enter, this will take you debugger starting from your Selection screen.
You might be knowing this, still if you are not aware of this, this might be a valuable tip.
From here , you can trace your Parameter name.

Query on editing standard report ,adding dynamic selection screen

Hi All to Abap Guru's,
I am facing this requirement for the first time ..
My requirement is to add dynamic selections on the selection screen of a predefined report and make some changes in the output..
I want to change the standard prog for the t-code "FBL5N"
this t-code contains LDB so plz help me out..this is an urgency......
based on this I have more 5 requiremnts if u could help
me out in the first object then other four I can manage my self..
so plz give me the idea how to approach this requirement ..
awaiting for u r reply...
and whoever it may be plz give u r contact number(requesting)...so that i can be in touch with u...
regards,
Ravi V Ganji

Hi Ravi,
From the transaction itself you can find out the corresponding program name.
Make an Zcopy of this program and do the changes as per the requirement, means you can add Select-options or Parameters and change the program logic accordingly.
Find out where the WRITE statements are happened , add/ remove the fields according to the user requirement.
If find successful create a transaction code for it(SE93).
I think it will solve your problem.
Regards,
Antony Thomas

Problem in displaying selection screen of a abap-hr report

Hi,
I have developed a abap-hr report in ver..6.2.I have used logical data base PNP for it.It was working fine.
But when i migrate it into ver.4.6, I can see no selection screen for the report.
How to get the selection-screen?
Please help me through.
Thanks in advance,
Raj.
Edited by: raj b on Feb 20, 2008 8:00 AM

Hi Raj,
Please check whether you have assigned any report category for the PNP selection screen in the version 6.2.
The report category might not exist in the 4.6 version and that might be the reason the selection screen is not appearing.
Cheers,
Aditya

Passing values to a dynamic selection screen via a report

Hi,
I have the following problem and need to seek your expertise urgently.
In my program, I need to call another report by passing in parameters to the selection screen of other report. However, I could not pass values into a dynamic selection screen. I tried to use submit (report) with free selection but do not know how it works.
Currently, I tried calling the function RS_REFRESH_FROM_DYNAMICAL_SEL and FREE_SELECTIONS_RANGE_2_EX. Using the object the first function has returned to me, I tried to append values such as fieldname etc to it. However, I realised the field names of a dynamic selection screen keeps changing. So I would not know how to pass a particular value to a selection field.
Appreciate any help given.
Thanks,
CK

Hello CK,
Are you using logical database in your selection screen program attributes? If it is, look at include file DBxxxSEL for parameter named xxxDYNSE where xxx = logical database. Debug the program that has that dynamic selection, and look at field xxxDYNSE. This should give you a hint on how to populate the parameter when you submit the program.

Bypassing selection screen in custom reports added to MSS reporting

I have created a custom report (using PNP) in R/3 and added it to the MSS reporting (not Launchpad). Even though the manager is selecting his subordinate employee and clicks report result, he still sees a selection screen which i have defined in the custom report.
When the manager runs a sap standard report RPTABS50, he sees data of the employee only he selects.
How do i bypass the selection screen in the custom ABAP report i have added to the MSS?
Thanks.

Has to take an alternate approach. Picked a standard report by SAP and modified to our requirements.

How to call dynamic selection screen from another report

hi,
i have transaction ZFAGLL03.
it has got standard selection screen.. and dynamic selection screen...
i am calling this transaction from another report, now how do i display this dynamic selection screen.....

Try following code and see if it helps:
TYPE-POOLS : rsds.
TABLES:tgsb.
DATA: trange TYPE rsds_trange,
       trange_line
         LIKE LINE OF trange,
       trange_frange_t_line
         LIKE LINE OF trange_line-frange_t,
       trange_frange_t_selopt_t_line
         LIKE LINE OF trange_frange_t_line-selopt_t,
          trange_line1
         LIKE LINE OF trange,
       trange_frange_t_line1
         LIKE LINE OF trange_line-frange_t,
       trange_frange_t_selopt_t_line1
         LIKE LINE OF trange_frange_t_line-selopt_t,
       texpr TYPE rsds_texpr.
DATA: seltab TYPE TABLE OF rsparams WITH HEADER LINE,seltex TYPE rsds_texpr.
SELECT-OPTIONS:so_gsber FOR tgsb-gsber.
LOOP AT so_gsber.
   trange_line-tablename = 'FAGLFLEXA_FS'.
   trange_frange_t_line-fieldname = 'RBUSA'.
   MOVE-CORRESPONDING so_gsber TO trange_frange_t_selopt_t_line.
   APPEND trange_frange_t_selopt_t_line
   TO trange_frange_t_line-selopt_t.
ENDLOOP.
APPEND trange_frange_t_line TO trange_line-frange_t.
APPEND trange_line TO trange.
CALL FUNCTION 'FREE_SELECTIONS_RANGE_2_EX'
   EXPORTING
     field_ranges = trange
   IMPORTING
     expressions = texpr.
submit FAGL_ACCOUNT_ITEMS_GL with FREE SELECTIONS texpr   AND RETURN .

Dynamic selection screen with ABAP web dynpro

Hi all.
    How can I create dynamic selection screen with ABAP web dynpro? Thank you in advance.

hi yinglak.....
         this is possible........ all the ui elelments has the property called visible and enabled.... just assign an attribute of type wdui_visibility to the visible property....
in the wddomodify method..... check for the radio button value and pass the value true or false to this attribute and it gets changed automatically.
---regards,
   alex b justin

How to define our own selection screen for logical database in abap-hr?

Hi Friends,
Can u please help me
How to define your own selection screens for logical database.
we use to do like(goto->attributes-HRReportcatagerious ).but How to desin using customer table like t599c, t599f and how to add to my logical database?
Thanks in advance
charan

check out this online help
http://help.sap.com/saphelp_erp2004/helpdata/en/9f/dba65c35c111d1829f0000e829fbfe/frameset.htm
Regards
Raja

Issue with MB25 BDC for Dynamic Selection Screen

Hi Experts,
I recorded one BDC for MB25 Tcode regarding to determine Open Reservation(s) in E Mode (Display Mode). I am passing 3 parameters.
1. Plant,
2. Requirement Date
3. Multiple Reservation Numbers i.e. RSNUM from Dynamic Selection i.e. 2nd Button -> Header Data for Reservation -> Reservation -> Multiple Selection Icon.
But while executing that BDC, I need to manually click every time on 'Header Data for Reservation' Tree and then Multiple Selection for Reservation Icon.
I want below steps automatically while executing:
- Open 'Header Data for Reservation' Tree
- Click Reservation
- Open Popup for 'Multiple Selection'.
So no need to click every time on Dynamic Selection Screen i.e. Header Data for Reservation -> Reservation -> Multiple Selection Icon.
Please find attached screen shot for your reference.
Please guide.
Thanks and Regards,
Emon Master

Hello Jainam,
submit (sy-repid) with selection-table v_sp
with free selections EXPRESSIONS
via selection-screen.
Without going through the details, dont you think this will cause an inifinite loop as the calling & the called programs are the same.
Please enlighten me !!
BR,
Suhas

Dynamic selection screen for custom ABAP report

Similar Messages

Maybe you are looking for