%ACE-2-901001 kernel: Warning:-MTS queue is full messages on ACE 4710

I am getting the following messages repeated continually in my Admin context
Apr 18 2012 14:42:27 CHIACE01: %ACE-2-901001 kernel: Warning:- MTS queue is full for opcode 4062 sap 63994 pid 18847 clear idle debug plugin sessions or telnet/ssh connections to recover
How do i clear them?
How can I check whether i have idle debug sessions?
or telnet/ssh sessions ( as far as i am aware no open telnet sessions, as they alway time out after 5 minutes)!

Hi,
Could be related to CSCtn85846
Symptom:
A warning message is displayed as follows: "Warning:- MTS queue is full for opcode %d sap %d pid %d clear idle debug plugin sessions or telnet/ssh connections to recover"
Conditions:
MTS messages to command shell are not processed as it executes user commands. Because a user command may take a while to terminate, the command shell can receive many MTS messages which won't be processed and run out of buffer space for the MTS queue. When this happens, a warning message is displayed.
Workaround:
This warning can be ignored. User can close all debug plugin sessions and terminate command execution in all telnet/ssh connections to stop display of warnings.
Dan

Similar Messages

Odd messages in Console log: Event queue is full!

Hi Everyone,
I have been trying to use Dolly Drive for cloud Time Machine backups, and I'm pretty certain that Dolly Drive is not the culprit, but there is some underlying problem.
I am seeing tons of these messages:
/System/Library/CoreServices/coreservicesd[29] FMOD WATCH EVENTS DROPPED!
mds[41] (Error) FMW: WE ARE DROPPING FMW EVENTS!
And these:
kernel add_fsevent: event queue is full! dropping events (num dropped events: 148; num events outstanding: 2391).
kernel add_fsevent: kfse_list head 0x832b72c0 ; numpendingrename 1704
kernel add_fsevent: zalloc sez: 0
kernel add_fsevent: event_zone info: 4096 0x0
kernel add_fsevent: watcher 0xe57d004: num dropped 0 rd 36 wr 36 q_size 1024 flags 0x0
kernel add_fsevent: watcher 0x6d432004: num dropped 0 rd 818 wr 818 q_size 8192 flags 0xc
kernel add_fsevent: watcher 0x6d442004: num dropped 0 rd 2165 wr 2168 q_size 8192 flags 0x5
kernel add_fsevent: watcher 0x6d2ae004: num dropped 4775 rd 3739 wr 3738 q_size 4096 flags 0x1
What is going on? What is the event queue and why is it full. I'm on a fairly recent fresh install of OS X 10.6 with the latest 10.6.7 update applied. All disk permissions repaired, Disk verified, Spotlight index rebuilt.
Help please.

Yeah, I found that one. Didn't seem helpful, at least in my case.
Seems that there is some problems either with using Dropbox and having Spotlight index that directory. Whenever Dolly Drive/Time Machine starts up and calls mds for indexing, something goes screwy.
This is at least my me and a Dolly Drive tech guy figured.

System.log, kernel[0]: file: table is full

After updating to Mac OS X 10.4.6, apache no longer runs on my PowerBook G4. I run apache for local web work and it has been running fine for a long time.
When I run do sudo apachectl start:
sudo apachectl start
/usr/local/bin/apachectl start: httpd could not be started
it cannot be started and /var/log/system.log shows:
kernel[0]: file: table is full
All I could find after searching the Internet via Google, Google Groups, Apple Knowledge Base, etc. are these reasons:
* Not enough sufficient free contiguous disk space on the volume. Need to optimize hard drive.
* Bad node on the hard drive.
* Defective hard drive.
I ran Disk Utility - Repair Permission and Repair Disk and both found no errors or problem. There were a few file permissions corrected, but that is all.
I also booted in to Mac OS X Safe Mode (CMD+S) and ran /sbin/fsck -yf and no errors were found/reported.
Since Mac OS X lacks a disk optimizer, I wondered where I could get a disk optimizer and whether optimize the volume would even correct this error.
Any free utilities to optimize the HFS+ volume in Mac OS X 10.4.6?
Apple's Support Knowledge Base states to either optimize the volume or do an Archive and Install. I cannot do an Archive and Install method due to my setup (MySQL, Apache, etc.).
About disk optimization with Mac OS X
PowerBook G4 1.67 SD Mac OS X (10.4.6)
PowerBook G4 1.67 SD Mac OS X (10.4.4)
PowerBook G4 1.67 SD Mac OS X (10.4.4)
PowerBook G4 1.67 SD Mac OS X (10.4.6)
PowerBook G4 1.67 SD Mac OS X (10.4.6)

Hi, Mark.
I'm not an Apache guru, but you may have two different issues here, depending on when the
kernel[0]: file: table is full
message is time-stamped relative to when you issue the
sudo apachectl start command.
1. Looking at the results of this Google search and some others tends to indicate that common causes for httpd could not be started are errors in the /etc/httpd/httpd.conf file.
You might also want to take a look at some of these other Discussions threads and in these "Networking and the Web" Discussion threads.
2. One explanation I've found for kernel[0]: file: table is full is here.
Hope these ideas help.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X

Kernel Warning; WARNING: cpu module 'cpu.AuthenticAMD.15' has API version 0

I installed patch 127128-11 on my solaris 10 x86 server and now I see this warning when I booted.
WARNING: cpu module 'cpu.AuthenticAMD.15' has API version 0,
kernel requires API version 1
The notes in the README state you will only see it after the first reboot and not afterwards.
NOTE 11: On first reboot after applying this rev of Kernel Patch (127128-11),
the following message may appear:
WARNING: cpu module 'cpu.AuthenticAMD.15' has API version 0,
kernel requires API version 1
This message can be safely ignored and will not occur on subsequent
reboots. This error occurs due to the method in which Deferred
Activation patches are installed, and in particular, in the way
in which kernel modules that are being obsoleted by this patch are
deleted. The error is benign and is safe to ignore.
Why do I see this warning every time I reboot the server?
Thanks,
Chris

Try:
1) touch /reconfigure ; "init 6"
and
2) after (1), boot "init 6" and look for the boot_archive being regenerated. If you don't see this message, I would manually re-do the boot archive.
There is a new kernel version now; 138889-08
Use PCA at http://www.par.univie.ac.at/solaris/pca/ to analyze your system (pca -l or pca -L). Then, if you want to patch:
- install the patch utilities patch first
- download all patches into a given directory (read pca docs)
- drop to single user mode
- pca -n -i first to get all the userland and no reboot/reconfig patches in
then
- pca -i to finish it off.
I've been doing this for some time and its been working well. Always backup and be careful.
- Mick

Im running 10.3.9 but kernel warning when i install 10.4 HELP

I have tried everything apple said to but it still opens kernel warning when it restarts.
What am i doing wrong?

+any Mac (that has FireWire)+
Unfortunately, that is not true. Some of the earliest G3s with FireWire are not bootable via FireWire. The Blue&White towers are not; I don't know about the original poster's iMac.

Behaviour of tpforward when ipc queue is full

Hi,
Can anyone explain the action taken by a server when the ipc queue of the service/server
it is trying to tpforward to is full? What appears to happen is the typical blocking
behaviour of a tpacall without the TPNOBLOCK flag set. Is there anyway of controlling
this behaviour? What we would like to achieve is the equivalent of a TPNOBLOCK
flag being set, with the server giving a failure message back to the caller immediately
(rather than waiting for the blocking timeout) so that it is freed up to continue
processing. Any and all suggestions welcome!
Thanks & regards,
Malcolm.

Hi Todd,
Thank you for following this thread! I've attached to TMUSREVT with strace to monitor msg* calls and figured out that TMUSREVT communicates with BBL periodically. Then I have reproduced TMUSREVT server hang in my lab environment. I've set a small value of kernel.msgmnb(kernel.msgmnb = 10512), ran a test client with many subscriptions and simulated high load on the server. When a hang occured TMUSREVT's queue looked this:
------ Message Queues --------
key msqid owner perms used-bytes messages
0x00000000 532545581 pbtrunk 666 10352 12
(virtually full)
And then in the ULOG I found the following records:
184431.host!BBL.14147.3086141120.0: LIBTUX_CAT:1285: WARN: tpreturn message send blocked, will try file transfer
184431.host!TMSYSEVT.14189.3086939840.0: WARN: .SysMachineMsgq: simple1 message queue blocking
184501.host!BBL.14147.3086141120.0: LIBTUX_CAT:1286: ERROR: tpreturn could not send reply TPETIME - timeout occured
Does this make sense for you?

ACE 4710 Appliance: init: failed to initialize modlock_init(): No such file or directo

Hi,
I have ACE 4710 Appliance, but it is failed and giving following error while login at console.....
I am suspecting hardware issue..most probably with harddrive.... Please let me know if it can be recoverable of only replacement is the solution..
switch login: init: failed to initialize modlock_init(): No such file or directo                                                                             ry
eth2: ERROR while getting interface flags: No such device
perform_sysmgr_offline: unable to move MTS to MTS_STATE_OFFLINE: Invalid argumen                                                                             t (error-id 0x801E0016).
init: failed to initialize modlock_init(): No such file or directory
eth2: ERROR while getting interface flags: No such device
perform_sysmgr_offline: unable to move MTS to MTS_STATE_OFFLINE: Invalid argumen                                                                             t (error-id 0x801E0016).
init: failed to initialize modlock_init(): No such file or directory
eth2: ERROR while getting interface flags: No such device
perform_sysmgr_offline: unable to move MTS to MTS_STATE_OFFLINE: Invalid argumen                                                                             t (error-id 0x801E0016).
/isan/sbin/sysmgr: symbol lookup error: /isan/lib/libutils.so: undefined symbol:                                                                              tftp_callback_fn
Regards
Nadeem

Hi,
I RMAed the appliace, i think it was hardware failure which casue this issue.
If some one face this issue please let me know...Thanks!
Regards
Nad

ACE 4710: No image in GRUB loader

I have an ACE 4710 appliance that has only a Linux kernel in its GRUB loader, no ACE image. Is anyone aware of how I could copy the image to the ACE via TFTP, USB drive, etc.?

Hi Joe,
Take a look at this link. It will show you how to copy and image to the ACE using the ACE-APPLIANCE-RECOVERY-IMAGE.bin. If it can't find this, then you may need to RMA the device.
Reformatting the Flash Memory
http://www.cisco.com/en/US/docs/app_ntwk_services/data_center_app_services/ace_appliances/vA3_2_x/configuration/admin/guide/managesw.html#wp1069378
Hope this helps,
Sean

ACE 4710 not responding

Hi,
We have to ACE 4710 device in our network and we have facing device hung issue in our Primary ACE. We are not able to get management access or direct console access to the device when the issue is happened and also we are not able to reach the vlan interface IP or/VIP. Please find the below output we got through monitor that we are connected to the ACE.
Booting localboot(c4710ace-t1k9-mz.A5_1_2.bin)
kernel=(hd0,1)/c4710ace-t1k9-mz.A5_1_2.bin ro root=LABEL=/ auto console=ttyS0,9
600n8 quiet bigphysarea=32768
[Linux-bzImage,setup=0x1400,size=0xe75a16c]
Uncompressing linux Ok, booting the kernal.
Issue is resolved after we manually rebooted the ACE. We have collected the sh tech after the reboot.
Software version : A5 1.2
Kindly suggest what may cause this issue.
Thanks in Adavance.
Regards,
Ranjith

Hi,
We have collected the console logs while we done the reboot. Please find the below output.
------------------------------------------------ Boot log -----------------------------------------------------------------------------
ÐS ÀS AMIBIOS(C)2005 American Megatrends, Inc. BIOS Date: 08/25/09 09:37:25 Ver: 08.00.11 CPU : Intel(R) Pentium(R) 4 CPU 3.40GHz Speed : 3.40 GHz Broadcom NetXtreme Ethernet Boot Agent v8.1.53 Copyright (C) 2000-2005 Broadcom Corporation All rights reserved. Press Ctrl-S to Enter Configuration Menu ... Broadcom NetXtreme Ethernet Boot Agent v8.1.53 AMIBIOS(C)2005 American Megatrends, Inc. BIOS Date: 08/25/09 09:37:25 Ver: 08.00.11 CPU : Intel(R) Pentium(R) 4 CPU 3.40GHz Speed : 3.40 GHz Press F2 to run Setup Press F12 for BBS POPUP DDR2 Frequency:667 MHz, ECC Support in Dual-Channel Interleaved Mode Initializing USB Controllers .. Done. 6144MB OK USB Device(s): 1 Keyboard Auto-Detecting Pri Slave...IDE Hard Disk Pri Slave : 1GB CompactFlash Card CF B612J GRUB Loading stage2........ GNU GRUB version 0.95.1 (639K lower / 3144640K upper memory) *************************************************************************** * localboot(ACE_APPLIANCE_RECOVERY_IMAGE.bin) * * localboot(c4710ace-t1k9-mz.A5_1_2.bin) * * localboot(c4710ace-t1k9-mz.A4_2_0.bin) * * * * * * * * * * * * * * * * * * * *************************************************************************** Use the * and * keys to select which entry is highlighted. Press enter to boot the selected OS, 'e' to edit the commands before booting, or 'c' for a command-line. The highlighted entry will be booted automatically in 1 seconds. kernel=(hd0,1)/c4710ace-t1k9-mz.A5_1_2.bin ro root=LABEL=/ auto console=ttyS0,9 600n8 quiet bigphysarea=32768 [Linux-bzImage, setup=0x1400, size=0xe75a16c] INIT: version 2.85 booting
b4 lspci
1 Cavium device(s) found.
Bringing up NP 0
Downloading U-Boot to NP card 0
Downloading DP image to NP card 0
Starting DP image on NP card on all cores
DP image started on NP card
Setting up dynamic memory size
Initializing Shared Memory
INIT: Entering runlevel: 3
Testing PCI path for Octeon(0)....
This may take some time, Please wait ....
PCI test loop , count 0
PCI path is ready
Starting services...
Waiting for 3 seconds to enter setup mode...
Certificate & key are up to date
Installing MySQL
groupadd: group nobody exists
useradd: user nobody exists
MySQL Installed
Installing JRE
JRE Installed
Starting sysmgr processes.. Please wait...Done!!!
IDC4-INTR-ACE-01 login: admin
Password:
Cisco Application Control Software (ACSW)
TAC support: http://www.cisco.com/tac
Copyright (c) 1985-2012 by Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained herein are owned by
other third parties and are used and distributed under license.
Some parts of this software are covered under the GNU Public
License. A copy of the license is available at
http://www.gnu.org/licenses/gpl.html.
We have not found any error related to flash while booting ACE.
Regards,
Ranjith

Need help to Configure Cisco ACE 4710 Cluster Deployment

Dear Experts,
I'm newbie for Cisco ACE 4710, and still I'm in learning stage. Meanwhile I got chance at my work place to deploy a Cisco ACE 4710 cluster which should load balance the traffic between two Application Servers based on HTTP and HTTPS traffic. So I was looking for good deployment guide in Cisco SBA knowledge base then finall found this guide.
http://www.cisco.com/en/US/docs/solutions/SBA/February2013/Cisco_SBA_DC_AdvancedServer-LoadBalancingDeploymentGuide-Feb2013.pdf
This guide totally fine with my required deployment model. I have same deployment environment as this guide contains with ACE cluster that connects to two Cisco 3750X (Stack) switches. But I have some confusion places in this guide
This guide follow the "One-armed mode" as a deployment method. But when I go through it further I have noticed that they have configured server VLAN as a 10.4.49.0/24 (all servers reside in it) and Client side VIP also in same VLAN which is 10.4.49.100/24 (even NAT pool also).
My confusion is, as I have learned about Cisco ACE 4710 one-armed mode deployment method, it should has two VLAN segments, one for Client side which client request come and hit the VIP and then second one for Server side. which means besically two VLANs. So please be kind enough to go through above document then tell me where is wrong, what shoud I need to do for the best. Please this is an urgent, so need your help quickly.
Thanks....!
-Amal-

Dear Kanwal,
I need quick help for you. Following are the Application LB requirements which I received from my clinet side.
Following detail required for configuring Oracle EBS Apps tier on HA:
LBR IP and Name required to configure EBS APPS Tier (i.e, ap1ebs & ap2ebs nodes)
Suggested IP and Name for LBR:
IP : 172.25.45.x [should be on same 172.25.45 subnet of ap1ebs & ap2ebs nodes]
ebiz.xxxx.lk [on port 80 for http protocol accessibility]
This LBR IP & name must be resolve and respond on DNS network
Server Farm detail for LBR Setup
Following detail will be use for configuring the LBR:
LBR IP and Name :
IP : 172.25.45.x [should be on same 172.25.45 subnet of ap1ebs & ap2ebs nodes]
ebiz.xxxx.lk [on port 80 for http protocol accessibility]
This LBR IP & name must be resolve and respond on DNS network
Server Farm Detail for LBR setup:
Server 1 (EBS App1 Node, ap1ebs):
IP : 172.25.45.19
Server Name: ap1ebs.xxxx.lk [ap1ebs hostname is an example, actual hostname will be use]
Protocol: http
Port: 8000
Server 2 (EBS App2 Node, ap2ebs):
IP : 172.25.45.20
Server Name: ap2ebs.xxxx.lk [ap2ebs hostname is an example, actual hostname will be use]
Protocol: http
Port: 8000
Since my client needs to access URL ebiz.xxxx.lk which should be resolved by IP 172.25.45.21 (virtual IP) via http (80) before they deploy the app on the two servers I just ran web service on both servers (Linux) and was trying to access http://172.25.45.21 it was working fine and gave me index.html page. Now after my client has deployed the application then when he tries to access the page http://172.25.45.21 he cannot see his main login page. But still my testing web servers are there on both servers when I type http://172.25.45.21 it will get index.html page, but not my client web login page. What can I do for this ?
Following are my latest config :
probe http Get-Method
description Check to url access /OA_HTML/OAInfo.jsp
interval 10
faildetect 2
passdetect interval 30
request method get url /OA_HTML/OAInfo.jsp
expect status 200 200
probe udp http-8000-iRDMI
description IRDMI (HTTP - 8000)
port 8000
probe http http-probe
description HTTP Probes
interval 10
faildetect 2
passdetect interval 30
passdetect count 2
request method get url /index.html
expect status 200 200
probe https https-probe
description HTTPS traffic
interval 10
faildetect 2
passdetect interval 30
passdetect count 2
ssl version all
request method get url /index.html
probe icmp icmp-probe
description ICMP PROBE FOR TO CHECK ICMP SERVICE
rserver host ebsapp1
description ebsapp1.xxxx.lk
ip address 172.25.45.19
conn-limit max 4000000 min 4000000
probe icmp-probe
probe http-probe
inservice
rserver host ebsapp2
description ebsapp2.xxxx.lk
ip address 172.25.45.20
conn-limit max 4000000 min 4000000
probe icmp-probe
probe http-probe
inservice
serverfarm host ebsppsvrfarm
description ebsapp server farm
failaction purge
predictor response app-req-to-resp samples 4
probe http-probe
probe icmp-probe
inband-health check log 5 reset 500
retcode 404 404 check log 1 reset 3
rserver ebsapp1 80
    conn-limit max 4000000 min 4000000
    probe icmp-probe
    inservice
rserver ebsapp2 80
    conn-limit max 4000000 min 4000000
    probe icmp-probe
    inservice
sticky http-cookie jsessionid HTTP-COOKIE
cookie insert browser-expire
replicate sticky
serverfarm ebsppsvrfarm
class-map type http loadbalance match-any default-compression-exclusion-mime-type
description DM generated classmap for default LB compression exclusion mime types.
2 match http url .*gif
3 match http url .*css
4 match http url .*js
5 match http url .*class
6 match http url .*jar
7 match http url .*cab
8 match http url .*txt
9 match http url .*ps
10 match http url .*vbs
11 match http url .*xsl
12 match http url .*xml
13 match http url .*pdf
14 match http url .*swf
15 match http url .*jpg
16 match http url .*jpeg
17 match http url .*jpe
18 match http url .*png
class-map match-all ebsapp-vip
2 match virtual-address 172.25.45.21 tcp eq www
class-map type management match-any remote_access
2 match protocol xml-https any
3 match protocol icmp any
4 match protocol telnet any
5 match protocol ssh any
6 match protocol http any
7 match protocol https any
8 match protocol snmp any
policy-map type management first-match remote_mgmt_allow_policy
class remote_access
    permit
policy-map type loadbalance first-match ebsapp-vip-l7slb
class default-compression-exclusion-mime-type
    serverfarm ebsppsvrfarm
class class-default
    compress default-method deflate
    sticky-serverfarm HTTP-COOKIE
policy-map multi-match int455
class ebsapp-vip
    loadbalance vip inservice
    loadbalance policy ebsapp-vip-l7slb
    loadbalance vip icmp-reply active
    nat dynamic 1 vlan 455
interface vlan 455
ip address 172.25.45.36 255.255.255.0
peer ip address 172.25.45.35 255.255.255.0
access-group input ALL
nat-pool 1 172.25.45.22 172.25.45.22 netmask 255.255.255.0 pat
service-policy input remote_mgmt_allow_policy
service-policy input int455
no shutdown
ft interface vlan 999
ip address 10.1.1.1 255.255.255.0
peer ip address 10.1.1.2 255.255.255.0
no shutdown
ft peer 1
heartbeat interval 300
heartbeat count 10
ft-interface vlan 999
ft group 1
peer 1
no preempt
priority 110
associate-context Admin
inservice
ip route 0.0.0.0 0.0.0.0 172.25.45.1
Hope you will reply me soon
Thanks....!
-Amal-

Cannot Telnet to ACE 4710 after upgrade to A4(2.3)

I have a pair of ACE 4710s with 12 contexts sharing the load, running A4(2.1). Yesterday I upgraded one of them to A4(2.3)
now I cannot telnet to the Admin context.Pings ok. I can telnet to other contexts on the box and everything seems to be working ok
when i do a " sh telnet"
comes back with
No Session Information is available
sh telnet maxsessions
telnet maxsessions 16
Can anybody help?

further this post, it was not a resource problem as had allocated 5% for the Admin context.
I up graded IOS Saturday evening, could not Telnet in, tried again on Sunday same result,
though this morning (Monday) Can now telnet in ok very strange
I was connecting via the AUX line of a 2851 router to the console port.
whe I disconnected this morning I saw the following message
INIT: id "T0" respawning too fast : disabled for 5 minutes
not sure if this is a 2851 message or an ACE message, but after getting that message is when I was able to Telnet in
was it a coincidence
anybody any ideas

ACE 4710: Possible to allow a user to clear counters but nothing else?

Hello all,
Using an ACE 4710 we have a user setup with the Network-Monitor role which allows the user to view config, interface status, etc. We would also like to allow this user to clear the interface error counters as well, but nothing else. Is this possible?
Thanks!

Hello Brandon-
Network-Monitor only lets you browse outputs, it is a not a role that allows a user to make any changes including clearing stats. You can create custom roles and domains to get closer to what you want, but you cannot zero in on a single command like that.
i.e.
ACE# conif t
ACE(config)# role MyRole
ACE(config-role)# rule 1 permit modify feature ?
AAA             AAA related commands
access-list     ACL related commands
connection      TCP/UDP related commands
fault-tolerant Fault tolerance related commands
inspect         Appln inspection related commands
interface       Interface related commands
loadbalance     Loadbalancing policy and class commands
pki             PKI related commands
probe           Health probe related commands
rserver         Real server related commands
serverfarm      Serverfarm related commands
ssl             SSL related commands
sticky          Sticky related commands
vip             Virtual server related commands
You can create a permit or deny rule, within that, create/debug/modify/monitor each feature seperately.
Domains allow you to create containers for objects. You can place specific rservers, serverfarms, etc. into it - then apply it to a role so that the user assigned to it can only touch those objects.
Regards,
Chris Higgins

Help in resolving the error - Incident Queue is full

I've been given a 4.2.4 system to look into since the previous admin left some time ago.
I have found we are seeing the following
Error pn datax IncidentXmlNotificationServlet PN-1100: Java message: Error sending XML Notification. Incident Queue is full.
and we no longer get the previously configured XML emailed actions when a rule gets hit.
I have been looking trying to determine what and how needs to be cleared.
Any insight would be appreciated.

Thanks,
Actually that is what I did (reboot) and functionality has returned.
Thanks for suggesting something so obvious that I didn't think about that. I guess I wanted to make the issue and resolution more complex that it needed to be.

TCP Provider: An operation on a socket could not be performed because the system lacked sufficient buffer space or because a queue was full.

Hi All,
We have snapshot replication . Job is failing in between due to below error.
Error messages:
The process could not connect to Subscriber 'XX:SD'. (Source: MSSQL_REPL, Error number: MSSQL_REPL20084)
Get help: http://help/MSSQL_REPL20084
TCP Provider: An operation on a socket could not be performed because the system lacked sufficient buffer space or because a queue was full. (Source: MSSQLServer, Error number: 10055)
Get help: http://help/10055
A network-related or instance-specific error has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL Server is configured to allow remote connections. For more information
see SQL Server Books Online. (Source: MSSQLServer, Error number: 10055)
Get help: http://help/10055
Login timeout expired (Source: MSSQLServer, Error number: HYT00)
Get help: http://help/HYT00
Please suggest

Hi Khushi，
According to your description, your snapshot replication job fails and you come across the error related to TCP Provider. Based on my research, the issue could occur as the following two situations.
1. OS runs out of memory for TCP buffers. When people use the two switch: the /PAE switch in the c:\boot.ini file and the /3gb switch in the boot.ini file. If the applications require many OS resources, such as by opening many TCP connections, this can cause
the OS to run out of memory for resources like TCP buffers.
2.OS runs out of available TCP “ephemeral” ports. When the client machine is opening many TCP connections and is running Windows Server 2003, Windows XP, or any earlier version of Windows, it may run out of TCP “ephemeral” ports.
To work around the issue, please follow the two solutions as below.
1.Remove the /3gb switch from c:\boot.ini. The root problem in this case is memory pressure on the OS, so removing the /3gb switch will give more memory to the OS and will alleviate this problem.
2.Make more ephemeral ports available following the steps in the article:
http://support.microsoft.com/kb/196271
For more information about the process, please refer to the article:
http://blogs.msdn.com/b/sql_protocols/archive/2009/03/09/understanding-the-error-an-operation-on-a-socket-could-not-be-performed-because-the-system-lacked-sufficient-buffer-space-or-because-a-queue-was-full.aspx
Regards,
Michelle Li

ACE 4710 in bridge mode not working

I am trying to configure ACE 4710 bridge mode and I am stuck up in physical interface configuration. I have configured gig1/2 of ACE as trunk port and on layer 2 switch I have assigned that interface (gig1/2) to VLAN 11. I tried trunk port also but it got disabled due to BPDU error.
I am not able to ping servers as well as gateway. Below are the topology and context configuration:
Router   (vlan 13: IP 172.16.11.254)
     |
ACE     (int gig1/2)
     |
L2 Switch
     |
Servers (vlan 11: IP 172.16.11.1 and 11.2)
Admin Context
===========
resource-class rc1
limit-resource all minimum 0.00 maximum unlimited
limit-resource sticky minimum 0.20 maximum unlimited
boot system image:c4710ace-mz.A3_2_4.bin
interface gigabitEthernet 1/1
switchport access vlan 1000
no shutdown
interface gigabitEthernet 1/2
switchport trunk allowed vlan 11,13
no shutdown
interface gigabitEthernet 1/3
shutdown
interface gigabitEthernet 1/4
shutdown
access-list ALL line 8 extended permit ip any any
access-list everyone line 8 extended permit ip any any
access-list everyone line 16 extended permit icmp any any
class-map type management match-any remote_access
2 match protocol xml-https any
3 match protocol icmp any
4 match protocol telnet any
5 match protocol ssh any
6 match protocol http any
7 match protocol https any
8 match protocol snmp any
policy-map type management first-match remote_mgmt_allow_policy
class remote_access
    permit
interface vlan 1000
ip address 172.16.16.16 255.255.255.0
access-group input ALL
service-policy input remote_mgmt_allow_policy
no shutdown
ip route 0.0.0.0 0.0.0.0 172.16.16.254
context test
allocate-interface vlan 11
allocate-interface vlan 13
member rc1
test Context
=========
access-list bpdu-fixup ethertype permit bpdu
access-list ALL line 8 extended permit ip any any
access-list ALL line 16 extended permit icmp any any
rserver host srv1
ip address 172.16.11.1
inservice
rserver host srv2
ip address 172.16.11.2
inservice
serverfarm host srv
rserver srv1
    inservice
rserver srv2
    inservice
sticky ip-netmask 255.255.255.255 address both SG1
timeout 120
serverfarm srv
class-map type management match-any remote-mgmt
201 match protocol snmp any
202 match protocol ssh any
203 match protocol icmp any
204 match protocol http any
205 match protocol https any
206 match protocol xml-https any
class-map match-all slb-vip
2 match virtual-address 172.16.11.10 any
policy-map type management first-match remote-mgmt
class remote-mgmt
    permit
policy-map type loadbalance first-match slb
class class-default
    sticky-serverfarm SG1
policy-map multi-match client-vips
class slb-vip
    loadbalance vip inservice
    loadbalance policy slb
    loadbalance vip icmp-reply
interface vlan 11
bridge-group 1
access-group input bpdu-fixup
access-group input ALL
access-group output ALL
no shutdown
interface vlan 13
bridge-group 1
access-group input bpdu-fixup
access-group input ALL
access-group output ALL
service-policy input remote-mgmt
service-policy input client-vips
no shutdown
interface bvi 1
ip address 172.16.11.9 255.255.255.0
no shutdown
ip route 0.0.0.0 0.0.0.0 172.16.11.254
Could you pls. suggest where I am doing wrong?
Thanks,
Pawan

" I tried trunk port also but it got disabled"   <----- if your L2 config is not correct, nothing will work.
What is the setup on the switch ? Trunk or access vlan ?
What is the status of the interface ? up ? down ?
Do you see something in your arp table ?
Gilles.

%ACE-2-901001 kernel: Warning:-MTS queue is full messages on ACE 4710

Similar Messages

Maybe you are looking for