E-print repeating pages

every time I e-print wireless pages from my tablet to my HP D5560 printr,it finishes the requested job and then says out ofpaper. I put paper in and it starts printing the pages again.
This question was solved.
View Solution.

Thanks abacuslearner. If you are using the ePrint app, can you verify the number of copies are set to 1 before printing? Has this happened with multiple file types or just PDFs? Are you in the ePrint app, or using a different program and sharing it to the app to initiate the print? If so what app are you starting in? Can you try to recreate it with double the required paper loaded?
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Similar Messages

Current page printing problem - while repeating pages : Adobe forms

Hi Experts,
I have a problem in printing current page number of an adobe form.
My requirement is that , my form got 2 pages. On first page i am not printing page numbers and excluded from numbering.
Numbering starts from second page. The second page needs to be repeated twice.
In this case my page printing should look like :
First page - no page number
second page - 1 of 1
Third page - 1of 1 (as it is a copy)
IF second page extends to multiple pages (eg.. 2)
First page - No Page no
First instance of second page - 1of 2 , 2 of 2
Second instance of second page - 1 of 2 , 2 of 2 . Presently it is printing like : 3 of 2 , 4 of 2. I need to initialize current page count. I could able to set the total page count 2 via variable from print program. But while printing the second instance, I am not able to initialize the current page count.
I have seen the following thread which exactly talks about my problem but with out any solution.
Re: Adobe Forms - Page Count
Can any one help me in this regard.
Thank You,
Regards,
Naresh.

Hi,
I am not sure how your page design looks like.
Assumption:
During runtime, ONLY 1 page for Page1, multiple pages for Page2 and Page3, same number of pages for Page2 and Page3.
This is what i did:-
I have 3 pages:
Page1: With NO page number: ONLY 1 page
Page2: With page number: Multiple page
Drag the "Insert -> Custom -> Page n of m"
- TextField: "CurrentPage",
-- replace the original script: "this.rawValue = xfa.layout.page(this)" with "this.rawValue = xfa.layout.page(this) - 1"
- TextField: "PageCount",
-- replace the original script: "this.rawValue = xfa.layout.pageCount()" with "this.rawValue = ( xfa.layout.pageCount() - 1 ) / 2"
Page3: With page number: Multiple page
Drag the "Insert -> Custom -> Page n of m"
- TextField: "CurrentPage",
-- replace the original script: "this.rawValue = xfa.layout.page(this)" with "this.rawValue = xfa.layout.page(this) - 1 - ( xfa.layout.pageCount() - 1 ) / 2"
- TextField: "PageCount",
-- replace the original script: "this.rawValue = xfa.layout.pageCount()" with "this.rawValue = ( xfa.layout.pageCount() - 1 ) / 2"
Good luck.

SSRS 2008 R2 report does not print the page header for a html content displaying on multiple pages

Hi
I need to display the html content from the database. The html content are quite long and can have content of 3-5 pages. Issue I am facing is f the record has html content of 3-5 pages, then it does not print the page header (which is a separate tablix) on
second page onwards.
Nikesh Shah
Nikesh Shah

Hi Nikesh,
According to your description, I’m not sure the meaning of Page header in your scenario. In Reporting Services, a page header that run along the top of each page, respectively. Headers can contain static text, images, lines, rectangles, borders, background
color, background images, and expressions. But we couldn’t add tablix in the page header.
If you are saying report header, a report header consists of the report items that are placed at the top of the report body on the report design surface. They appear only once as the first content in the report. So it cannot repeat in other pages.
If you are saying tablix header, freezing column headers are different in table and matrix. For more details, please refer to the following thread:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/c8ddc1af-1bdf-4e72-8aab-0353c7cc848a/ssrs-report-freezing-row-and-column-while-scrolling-issue?forum=sqlreportingservices
If there are any misunderstanding, please elaborate the issue for further investigation.
Regards,
Katherine Xiong
Katherine Xiong
TechNet Community Support

How to print last page in smartforms

Hi,
In my smartform i have 3 pages (FIRST, NEXT & LAST). FIRST contains some header detail and items. NEXT contains rest of items and this page would be repeatable if more item comes. now after NEXT i want to print LAST page. How to achieve this. PLease let me know. I looked into forum but haven't get exact answer so far.
Rgds

Hello,
According to your scenario you are having 4 orders and each order has to print seperately with the last page .right?
The best soln would be,
1) create another internal table same as the one you have and delete adjacent duplicates using order, so you will have 2 internal table one with 4 orders (it-1)and other with all the items(it-2).
2) In the driver program ,
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
    control-no_open = 'X'.
    control-no_close = 'X'.
    output-tdnewid = 'X'.
   PERFORM ssf_open.
CALL FUNCTION 'SSF_OPEN'
EXPORTING
ARCHIVE_PARAMETERS       =
user_settings            = ' '
MAIL_SENDER              =
MAIL_RECIPIENT           =
MAIL_APPL_OBJ            =
output_options           = output
control_parameters       = control
IMPORTING
JOB_OUTPUT_OPTIONS       =
EXCEPTIONS
   formatting_error         = 1
   internal_error           = 2
   send_error               = 3
   user_canceled            = 4
   OTHERS                   = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT it-1.
    CALL FUNCTION l_fm_name
endloop.
CALL FUNCTION 'SSF_CLOSE'.
2) In the smartform
     FIRST ->   next page -> NEXT
               Beneath the main window -> Table, put Command - Goto new page as LAST.
     NEXT ->   next page -> NEXT
     LAST ->   Next page -> Blank
I hope this will work as I have done a similiar dev.
Regards,
Radhakrishnan

ICal, PDAs and print planner pages

I'm somewhat confused after reading a number of posts in search of answers to these questions. So, I'm just going to ask here.
I'm using OS 10.4.1. I have a Palm Tungsten that I currently sync to the Palm Desktop. But I'm considering the switch iCal.
What's the best way to sync to iCal? And are there disadvantages to using iCal over the Palm Desktop?
How can I easily print monthly pages for my paper planner? I use my Franklin Planner in conjunction with my Palm because it's much easier for my family to view a month at a glance.
iMac Mac OS X (10.2.x)

Having recently made the switch, I can share from my experience.
The Missing Sync seems to be the best way to fly. Seem intuitive and robust.
Couple of differences I've found you should be aware of -
1) Multi-day events are handled differently with Missing Sync (and possibly any other iCal link up, but I'm not sure). Say you have a three day trip you want to plan. Instead of a bar across all three days, like Palm, you need to set iCal to show three repeating days (three little bars - one for each day). Otherwise it's not handled correctly. Not a big thing, but for me who does a lot of multi-day planning, it was almost a deal breaker.
2) I presume you'll use the Address Book? If so, e-mails are listed as a Work function, not under the title "E-mail". Again, not a problem unless you link to multiple computers. Sycing with my Mac, but using my Palm to overwrite data on another computer using Outlook really messed with my Outlook data - it didn't know how to handle the e-mail stuff.
Printing is pretty straightforward, but works best if you use a color printer (if you have multiple calendars, or categories as Palm would use the term).
All in all, a pretty painless jump. Hope this helped.
Gary

HP Officejet Pro 8000 -- keeps printing alignment page

I was having troubles with the black ink not printing correctly so after doing many cleanings I decieded to manually clean the print head. I took the printhead out of the printer then wipped the part where the ink comes out with a most paper towle. After I put the printhead back in the printer printed a print alignment page. OK. Now when ever I print anything the printer will after the print job is done print another alignment page. Is there a way to make it stop? Thanks for you help.
This question was solved.
View Solution.

@MacNeilBlue- I am sorry that you are having an issue with the alignment page printing repeatedly. I would remove, and reseat the cartridges. Then I would repeat the alignment process as shown below.
Open the HP product software:
Windows XP: Click Start ( ), click All Programs , click HP , click the folder for your HP product, and then click the icon for your HP product ( ).
Windows Vista or Windows 7: Click the Windows icon ( ), click All Programs , click HP , click the folder for your HP product, and then click the icon for your HP product ( ).
Windows 8:
Right-click or tap and hold the lower left corner of the screen, and then click or tap Search from the menu.
Click or tap Apps ( ) if it is not already selected.
Type HP in the search box.
Click or tap your printer ( ).
NOTE:You can also open the HP product software from your computer desktop: double-click the icon for your HP product ( ).
The product software opens in a new window.
In the product software, double-click Printer Actions ( ).
Double-click Maintenance Tasks ( ). The HP Toolbox opens.
Click the Device Services tab.
Click Align Ink Cartridges , and then follow the on-screen instructions to print the alignment page.
Lift the scanner lid.
Place the alignment page with the printed-side down on the right front corner of the scanner glass. See the engraved guide next to the scanner glass for help loading the alignment page.
Figure 6: Place the alignment page on the scanner glass
Close the scanner lid.
Press the button next to OK on the control panel display ( ) The product scans the alignment page.
When the Alignment successful message displays on the control panel screen, press the button next to OK on the control panel display ( ) to complete the alignment.
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?

Printing Continuous Pages

Hellow
I'm trying to Print continuous pages report, of a Purchase Order (PO). An PO can contain more than one item, say 25 items, in which it will go to second and maybe third page.
At the Time of printing and when it comes to the next Page: The printing dose not start from where it should do, rather it starts from the middle of the page.
What Should be set & dose to resolve such a prob??
Note:
PO header Repeating frame is set to Fixed (Vertical Elasticity)
PO Detil Repeating frame is set to Expand (Vertical Elasticity) with max. no of records displayed to 10
System config is:
Oracle developer 6i Rel. 2
Windows 9x SE (Arabic Enabled).
Oracle 8i (V. 8.1.5)
Please Do Help.
Thanx,
Tariq

Try placing a variable sized frame (M_1) around:
PO header Repeating frame is set to Fixed (Vertical Elasticity) This will cause your second frame:
PO Detil Repeating frame is set to Expand (Vertical Elasticity) with max. no of records displayed to 10 to move up the page when it moves onto the second page since it moves to take up the space free'd by M_1.

Officejet 150 wont print full pages in Word

Officejet 150 Mobile misses printing parts of a page of text in Word 2007. I created several lines of text and it simply won't print them all. I then filled an entire page with Ariel, size 11 font. It skipped printing every third line. I repeated this with a larger font and it cut the text, horizontally, along the same width lines. Did the same thing in Corel WordPerfect X4 with the same result. Ditto in Avery Design & Print. It won't print entire 3/4" sections across the page. I've uninstalled drivers/printer, rebooted, etc., several times to no avail. Print Doctor keeps saying device is busy but it's not. No print jobs in que, printer was cycled on and off (several times).

Hey @dmartin05,
Welcome to the HP Support Forum.
I understand your HP Officejet 150 Mobile All-in-One Printer won't print full pages from specific word processing programs. I would like to help.
I recommend you try the following steps so we can determine whether this is most likely a hardware versus software issue:
From the front panel of your printer, make a black copy of an ordinary full-page text document. Does the partial page/print quality issue persist?
Next, touch Setup / Reports/ and Print Quality Diagnostic. How does the Print Quality Diagnostic from your printer compare to the report highlighted in the following link?:
HP Officejet 150 Mobile All-in-One Printer Series (L511) - Troubleshooting Print Quality Issues
If you were able to make a decent copy of a text document, and your Print Quality Diagnostic Report printed without any discernible issues then we can safely assume the issue is software related. If that's the case, please respond to this post and I'll be happy to provide further troubleshooting suggestions.
If you find it's the opposite and there are print quality issues from the front panel, treat this as a hardware issue and follow the troubleshooting steps provided in the above-linked article.
Best of luck - have a great weekend!
E-roq
I work on behalf of HP.
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

How does one print selected pages of a PDF document

I deal a lot with lengthy PDF documents and always need to print just a few pages from it. In Windows after I selected Print I could choose certain pages (e.g. 2-5,18,23, 44-46). On Leopard every time I select Print I don't get a choice and the whole document prints, wasting a lot of time, ink and paper in the process. I followed instructions from the Help file but I never get to the expanded menu that would give me that choice.
Also, when printing from the web I am used to highlight what I wanted printed and click Print, then Selection. The only way I get it to print just what I want is by using the Grab program, capturing the selection and printing from it. Is there an easier way?
Any and all help is greatly appreciated as I make my transition from Windows XP to Leopard a smoother transition. Thank you.

Open the document. On the left of the document there should be a scrolling list of the pages of the document. Select the first page. Hold down the 'Command' key. While the 'Command' key is pressed down, select another page from that list. Repeat until you have selected all the pages you want to print. Select 'Print' from the 'File' menu. The Print dialog box which shows up should say that you want to print 'x' pages, where 'x' is the number of pages you have selected. Click on 'Print'. The pages you have selected will print.

Pdf prints last page mirrored and upsidedown

Last year, my old tower Mac (OSX10.7.X) suddenly began printing out the last page (only) of any PDF with an odd number of pages inverted in both vertical and horizontal axes (i.e. upside down mirror-writing), when doing double-sided printing on our HP Color Laserjet CP4005dn. Single sided printing from the same Mac and PDF worked fine. The same last page also prints correctly if I simply chose to print that page alone. I do not have the 'flip horizontal' checkbox ticked. I could find no solution.
I bought an iMac 27" late 2013 with OSX 10.9.4, all upgrades installed. I still have the same problem. I repeat, this only happens in double-sided printing (selected 'long edge binding' under Layout) of the last page of a PDF with odd-numbered pages. Word docx and other documents print just fine from the same computer and printer with same settings in the Print dialogue.
Any suggestions?

Well, it's time to ask Adobe for help... Probably some preference file corrupted or similar...
On the other hand, personally, I would be trying some generic maintenance right now -
Reset Printing System:
OS X Mavericks: Reset the printing system
Startup from Recovery partition (or any other bootable drive) and repair the disk drive using Disk Utility:
(read just the 1st paragraph About Recovery from this)
OS X: About OS X Recovery
consider downloading and re-updating using the COMBO updater (this isn't from Software Update/App Store):
OS X Mavericks 10.9.4 Update (Combo)
(or similar for Lion)
OS X Lion Update 10.7.5 (Client Combo)

Printing multiple page copies per sheet

I am trying to print 4 pages per sheet in Adobe Acrobat Pro 9. I understand how to choose "multiple pages per sheet" in the print dialogue box, but instead of printing pages "1,2,3,4" on sheet #1, I'd like to print 4 copies of page 1 on sheet #1 (i.e. 1,1,1,1), 4 copies of page 2 on sheet #2, etc. I've found this possible by typing pages "1,1,1,1,2,2,2,2..." in the print range box. However, I have a 233 page document and the dialogue box cannot handle that many characters. Is there another way I can do it? Thanks!

You can try Quite Imposing Plus 2.9.
Just use your Step and Repeat feature. It doesn't matter how many pages you have.
Just go to our site ww.quite.com and download the Demo (Mac or Windows).
Here is a temporary number to test it with.
Quite Imposing Plus V1/V2
Expires end 5/2009 Serial 8773-0292-1788-1358 Code 6178
Also, once loaded: Check out Getting Started tech sheet. Go to our Imposition Control Panel and click on the
? button.....then click the Getting Started button. Lots of good information on Step and Repeat, signature setups, Step-by-step
Instructions and New features.
You can also look at www.quite.com/imposing/techsheet .
To see how to put on colorbars, setup cutstacks, etc.
cheers,Charles
Charles James
Technical/Marketing Director
Quite Software
1527 Law Street
San Diego, CA 92109
USA
858.581.9143
[email protected]
www.quite.com

After printing one page, cartridge does not move

i reinstalled HP Officejet j4680 all in one printer, was not connecting to wireless internet connection. Now after printing one page, ink cartridge does not move, giving paper jam error but actually there is no paper jam. Any solution to this problem. please help !!

Hello @kalsi_k,
Welcome to the HP Support Forums!
I would like to assist you today with resolving the carriage issue that you're experiencing on your HP Officejet J4680 All-in-One Printer. Thank you for including in your post that you have already checked for paper jams. At this point I am going to run your through some troubleshooting steps to specifically check the carriage path area within the printer. There is always a chance that a piece of debris or paper may have been missed when you checked for paper jams as even the tiniest piece of paper can cause these types of issues. Can I please have you follow the steps below.
To start, can I please have you click here. Once the support document opens can I please have you run through Solution two, Solution three, Solution four, Solution five, and Solution six. This includes any sub-steps under the listed Solutions. Please pay close attention to the carriage path area. Also, if you have already checked all the area in the printer for jams or debris you do not have to repeat those steps.
Please respond to this post with the result of your troubleshooting. Best of luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

HP Color LaserJet CP3525n keeps printing blank pages without stopping

Hi, I'm having trouble with this printer, it keeps printing blank pages one after anotther as soon as it is turned on. Some pages are completely blank others have smiley faces and other characters on it. And it keeps doing this even after it has been restarted. Any idea how to fix this problem?

1. take out all of the ink cartriges and look at the big black roller on the door for streaking, if streaking, clean with a lint free cloth dampened with windex (window cleaner) then close the door.
2. let it run to initializing.
3. open the door and look and the black roller on the door to see if you have streaking. If no streaking put one cartridge in and close the door and repeat the steps until you find what cartridge is causing the problem.
I did this and found that my cyan was creating the lines on my paper. I cleaned the cyan roller with a Qtip and some rubbing alcohol and it works fine now, no more lines on the paper.
Cheers

MF8580 prints two pages, then gives paper size and settings mismatch error. Help!

Hello, I have been dealing with this problem for weeks now. When i called support, they told me it was my computer, that it was "running slow" and that i need to pay for their service - that fixing errors in my registry would fix the problem. However, i have my own registry cleaner and that isnt the problem. Every time i print something, the printer will print the first two pages, and then beep, giving me the error "paper size and settings mismatch Drawer 1" - I have everything set to letter - in the driver, on the printer, etc. I do nto understand why it prints two pages and then tells me there is a mismatch. If i open and close the drawer, it will print the second page again and then the third page, and give me the same error again. rinse and repeat. This also happens when multiple documents are spooled. I send three - one page documents, it will print the first and second, give me the error, i open and close the paper drawer 1, then it prints document two and three - then gives me the same error - i open and reclose and it prints the thrid document... I am just baffeled.

Hi!
To ensure the most accurate information is provided, we will need to know the version of Windows or Mac in use. Also, we wanted to mention that it sounds like the number you reached was not an official Canon support number, as we do not charge for support. If this is a time-sensitive matter, our US-based technical support team is standing by, ready to help 24/7 via Email at http://bit.ly/EmailCanon or by phone at 1-800-OK-CANON (1-800-652-2666) weekdays between 10 AM and 10 PM ET (7 AM to 7 PM PT).
Thanks and have a great day!

I downloaded the latest Adobe Reader when prompted. Since then I cannot use Safari File Print to print web pages - the printer dialogue window opens but the page is blank. Also, when I try to use the safari Help button,the dialogue box is blank.

I downloaded the latest Adobe Reader update when prompted. Since then I cannot use Safari>File>Print to print web pages - the printer dialogue window opens, but the page remains blank. Also when I try to use the Safari Help button, the dialogue box opens but remains infuriatingly blank. Can anyone help me to solve this problem?

Back up all data.
Quit Safari. In the Finder, select Go ▹ Go to Folder from the menu bar, or press the key combination shift-command-G. Copy the line of text below into the box that opens, and press return:
/Library/Internet Plug-ins
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then launch Safari and test.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

E-print repeating pages

Similar Messages

Maybe you are looking for