E-recruitment Print all functionality
Hi,
We have a requirement regarding print all attachments of all the candidates of a particular
requisition in e-recuitment.
Is there any provision to print all the attachments based on the Doc id stored in SKPR07.
We are in EHP4 level 5
Thanks and Regards.
Vijaya
Hi,
the e-mail address in e-recruiting is taken from the business partner. This e-mail address was inserted either by ALE or via rcf_create_user.
It seems that the e-mail address was not stored in BP.
So please check in transaction BP, if the user has the e-mail address assigned. If yes, you seem to have an authorization issue. If the e-mail address is not assigned, try to rerun HRALXSYNC.
Please set a break-point in that class at the beginning of that method and check, if the e-mail could be retrieved.
For testing puposes you can create a test user via rcf_create_user. There you have to assign the e-mail address. With that user it should work.
Best regards
Sebastian
Similar Messages
-
Acrobat 9 bug? - Print Pages function does not print all bookmarked pages
We use the Bookmark Print Pages function to allow for easy printing of sections of large PDFs. All of the pages that should be printed are bookmarked. The bookmarked pages print correctly in Adobe 8, but not in Adobe 9.
I have put together a javascript workaround, but would prefer a solution that does not require distributing a file to all users.
I would appreciate any suggestions on other possible workarounds.
Here is the bug report I submitted to Adobe:
Concise problem statement: The "Print Pages" function for bookmarks does not print all bookmarked pages in Adobe Reader 9.0 and 9.1. The same bookmarks print properly in Adobe Reader, Standard, and Pro 8.
Steps to reproduce bug:
1. Open the Adobe Acrobat SDK JavaScript for Acrobat API Reference PDF (Version 8.1, April 2007) in Adobe Reader 9.0 or 9.1.
2. View the bookmarks. Right-click on New Features and Changes and choose "Print Pages."
3. Open the same PDF in Adobe Reader, Standard, or Pro 8. (I used Adobe Professional 8.1.3.)
4. View the bookmarks. Right-click on New Features and Changes and choose "Print Pages."
Results and Expected results: Printing from v8 results in 12 pages. Printing from v9 results in 9 pages. Pages 741, 754, and 769 did not print from v9.I'm having the same issues. Using the latest version 9.3.3. Is this a bug? I tired calling adobe but their CR sounds like 3rd country only. Anyone can shed a light on this issue?
-
I used to print all my BioBench data by first exporting them to Excel and then print from there. Recently I need to print some of the screen shots and some data directly from array analysis, but when I click on the "print" buttons, the "Error, the printer is not set up correctly" message occurs. The only thing I can print from BB without this error is the report printing function. I have a postcript printer and I have set the postscript option to be "true"... Thanks !
This problem is a result of a limitation in Windows 9x regarding the size of an image that you can send to the printer. The problem does not occur on Windows 2000/NT. This problem appeared with the increased color options of LabVIEW 6.0 on which the BB1.2 is based.Although it is not immediately obvious, your video driver and settings play a role in printing.
1. Try adjusting the color palette your driver uses (i.e., 256 color, high olor, true color). The error may occur only in one of these modes. Also, change the resolution (number of pixels) to represent the Screen Area; e.g., change from a 1024 x 768 display to an 800 x 600 pixel display.
2.Certain video drivers also support "acceleration" modes. Using a non-accelerated mode often eliminates the error. For
Windows 95/98, right-click on your My Computer icon and select "Properties" from the pop-up
menu. On the Performance tab, click the Graphics button and change the Hardware Acceleration (e.g., if it is set to "Full", lower the setting a notch or two); for Windows 2000/NT, right-click on your Desktop and select "Properties" from the pop-up menu. On the Settings tab, click the Advanced button and go to
Troubleshooting.
3.In Windows, the standard VGA driver provided by the operating system is very stable. Try using this driver in place of the specific one written for your video hardware. If the error is eliminated, there is likely a problem with your vendor-provided video driver.
4.These errors are most often fixed with the latest
video/printer driver. Be sure to contact your hardware manufacturer and install the latest driver. An easy way to determine if your error is "driver-related" is to move your code to another machine (and hopefully a different set of drivers) and see if th
e error persists. If the problem is printer related, try another printer.
5.Make sure there are at least 100M avalible space in your C: drive. If not, set the virtual memory to the other drive which has larger available space. -
Acrobat 10 - Where's the print all open docs function?
In Acrobat 9 I was able to go to Advance->Batch Sequences->Print All
Then all of the documents that were opened would be printed, and if you wanted to it could Print All without saving. This was a very useful feature that I no longer have access to. I have to confirm every document I wanted printed and I don't see an option to print all opened documents.
Am I missing something?
-PixelMuseBatch processing has been removed from Acrobat X - instead there are Actions.
While it's possible to replicate the "print all open files" sequence to some extent, the interactivity of Actions is different, so it can't work seamlessly. For that reason it isn't in the default set of actions shipped with Acrobat X. -
How to print all values in record datatype?
Hello friends ,
I wrote one function which returned the departments record type.
when ever I called the function that returned departments record type and stored in department record type variable..I have to print all the values in record...
What can I do???
My code is like this...
set serveroutput on
declare
type depcur is ref cursor return departments%rowtype;
dep depcur;
rec departments%rowtype;
function ref_cur_demo(ref1 in depcur) return departments%rowtype
is
v_dep departments%rowtype;
begin
loop
fetch ref1 into v_dep;
exit when ref1%notfound;
end loop;
return v_dep;
end;
begin
open dep for select *from departments;
rec:=ref_cur_demo(dep);
--Here I have to print all the record variables;
end;Hi Gopi,
You have to write the program in different way. In your case the function always returns only one value. You can see only one department detail as output.
To display a record type variable you need to use record type variable name .(dot) field name.
SQL> set serveroutput on
SQL> declare
2 type depcur is ref cursor return departments%rowtype;
3 dep depcur;
4 rec departments%rowtype;
5 function ref_cur_demo(ref1 in depcur) return departments%rowtype
6 is
7 v_dep departments%rowtype;
8 begin
9 loop
10 fetch ref1 into v_dep;
11 exit when ref1%notfound;
12 end loop;
13 return v_dep;
14 end;
15 begin
16 open dep for select *from departments;
17 rec:=ref_cur_demo(dep);
18 --Here I have to print all the record variables;
19 dbms_output.put_line(rec.department_id||' '|| rec.department_name||' '|| rec.manager_id||' '||rec.location_id);
20 end;
21 /
270 Payroll 1700
PL/SQL procedure successfully completed.
Here is the sample code which will demonstrates using ref cursors.
SQL> create or replace function get_dept_detail
2 return sys_refcursor
3 is
4
5 x_res sys_refcursor;
6
7 begin
8
9 open x_res for select * from departments;
10 return x_res;
11
12 end get_dept_detail;
13 /
Function created.
SQL>
SQL>
SQL> -- Execution
SQL>
SQL> declare
2
3 res sys_refcursor;
4 l_rec departments%rowtype;
5
6 begin
7
8 res := get_dept_detail;
9
10 loop
11 fetch res into l_rec;
12 exit when res%notfound;
13 dbms_output.put_line( l_rec.department_id||' '||l_rec.department_name);
14 end loop;
15
16 end;
17 /
10 Administration
20 Marketing
30 Purchasing
40 Human Resources
50 Shipping
60 IT
70 Public Relations
80 Sales
90 Executive
100 Finance
110 Accounting
120 Treasury
130 Corporate Tax
140 Control And Credit
150 Shareholder Services
160 Benefits
170 Manufacturing
180 Construction
190 Contracting
200 Operations
210 IT Support
220 NOC
230 IT Helpdesk
240 Government Sales
250 Retail Sales
260 Recruiting
270 Payroll
PL/SQL procedure successfully completed.
SQL>
SQL> -- In SQL*PLUS
SQL>
SQL> var res refcursor
SQL> execute :res := get_dept_detail;
PL/SQL procedure successfully completed.
SQL>
SQL> print res;
DEPARTMENT_ID DEPARTMENT_NAME MANAGER_ID LOCATION_ID
10 Administration 200 1700
20 Marketing 201 1800
30 Purchasing 114 1700
40 Human Resources 203 2400
50 Shipping 121 1500
60 IT 103 1400
70 Public Relations 204 2700
80 Sales 145 2500
90 Executive 100 1700
100 Finance 108 1700
110 Accounting 205 1700
DEPARTMENT_ID DEPARTMENT_NAME MANAGER_ID LOCATION_ID
120 Treasury 1700
130 Corporate Tax 1700
140 Control And Credit 1700
150 Shareholder Services 1700
160 Benefits 1700
170 Manufacturing 1700
180 Construction 1700
190 Contracting 1700
200 Operations 1700
210 IT Support 1700
220 NOC 1700
DEPARTMENT_ID DEPARTMENT_NAME MANAGER_ID LOCATION_ID
230 IT Helpdesk 1700
240 Government Sales 1700
250 Retail Sales 1700
260 Recruiting 1700
270 Payroll 1700
27 rows selected.
SQL>
Cheers,
Suri ;-) -
Hi,
I have set in SPRO for dunning:
dunning level print all items
1
2 X
3 X
4 X
When I run transaction F150, I have 1 item in level1 and 3 items in level2, no exist another open items.
I use form created in smartforms (copy from F150_DUNN_SF)
When I print form for level2, I have in form only 3 items. But they would have to be 4 items, I think when I check "Print all items".
I tried it also F150_DUNN_SF - and some result.
Kindly let me know why don't print 4 items?
Regards, JaroslavHi ramanuje
I don't understand your answer.
I have form Z_F150_DUNN_SF (copy form F150_DUNN_SF). Have I check write in its?
Where? In initialization? In initialization I have CALL FUNCTION 'GET_SF_DUNN_DATA' that return 3 items. After that follows:
IF sy-subrc <> 0.
SY-MSGID = 'FM'.
SY-MSGTY = 'E'.
SY-MSGNO = 461.
raise others.
ENDIF.
h_t040a-text1 = space.
show_interest = space.
loop at th_mhnd into mhnd where xzins = ' '.
show_interest = 'X'.
exit.
endloop.
with regards, Jaroslav -
How to print all data in a table?
Hello!
I am doing report with VC. Now I want to print data ,The system action "print" can not print all data,only a page in the table can be printed. Are there any ways to finishe the print function,Can you help me?
Thank you very much!See this how to guide I put together:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/47fe4fef-0d01-0010-6f87-ed8ecb479123 -
How can I print all 3D views in one go?
I have several views of a part in a 3D-pdf, and I would like to print out the document so it prints all the views in one go. Best solution so far is to print out the first view, change view, then print again... rinse and repeat.
Any solutions to this?A simple Javascript function could loop through the 3D views and invoke the print operation.
-
How do I force the print dialog to default to Print All?
Hi all,
I've searched the forums for this and found several similar requests but no answers so I am posting this as a fresh post.
I have a requirement to have the print dialog appear when printing from javascript and have it always default to Print All. From my research, it appears that there are only two API methods to do this:
1) Print()
2) PrintWithDialog()
Neither take paramters. Both have the same description in the documentation (which seems odd in of itself).
From our research, PrintWithDialog() appears immediately when called (even if the PDF is not yet fully loaded) but always defaults to, "Print 1 of x" unless the PDF is only 1 page. In that case, it defaults to Print All.
The Print() method defaults to Print All. However, if you call it before the PDF is fully loaded, it does not show. I have searched these forums and found many other people running into this issue. One thread suggested to put in a timer to make sure the PDF is loaded and then call print. This works for small PDFs but our customers could be printing thousands of pages so there is no way to know how long to make the delay.
I tried paying for Support to answer this question and was told there were NO PAID OPTIONS for getting support on the Acrobat SDK and to come post the question here. The Support Engineer I spoke with assured me developers read and respond to these forums.
This is a critical issue for an important customer so any feedback is much appreciated.
An Adobe employee (Irosenth) mentioned something about a bug being reopened in this thread (http://forums.adobe.com/message/2601148#2601148) but no bug number was ever given. If it truly is a bug, please provide the number, description and ETA for fix.
If there is no solution, can I get a response from Adobe that supports my research as posted above? In other words, confirm that both the API are working as expected?
Finally, given that it seems many people want this functionality, how do I submit an enhancement request?
Best Regards,
BrianI downloaded Reader X and the problem is still occurrring, as was reported by the originator of this thread back in November.
Are there any parameters that need to be set for this to work? My customer is getting very impatient with this.
Also, since downloading Reader X the toolbar does not appear by default. It pops up when you hover over the top of the window. How do I get the toolbar to appear by default? (this is not nearly as important as defaulting the print dialog to Print All on mulitple page docs when using printwithdialog). -
How to use Print Screen function (part deux)?
The previous thread for the Print Screen function has been marked as read only, and won't allow any replies. I tried all of the suggestions (PrtScr, CTRL + C + PrtScr, etc.) and then CTRL V into MS Paint, but Print Screen still doesn't work on my machine.
I'm running Win 7 on a HP Pavilion laptop cv7-6b32us. I suspect there's a switch somewhere in Win 7 or HP that allows the key to be turned off. I know of this because my previous employer did not want anyone doing print screens due to HIPAA violations. Thus, the functionality was turned off. Those of us in I.T. were provided a third-party software that aloowed us to do the same function, but it was not released to the physicians or nursing staff. If I have to, I'll go out and buy the software. I really need this functionality for a class I'm taking.
Thanks!
This question was solved.
View Solution.Kurt, welcome to the forum.
Here is a video to show you how to use the Snipping Tool:
Please click the "Thumbs Up+ button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee. -
Print all filters defined in a report
I would like to print all filters that are defined in a report using DeskI or WebI (both version XI R2 and 3.1)...
In DeskI there are 2 functions in the "Insert" > "Special Field" menu: "Global Filters" and "Query Prompt"; however, I also want to list all other filters that are set on tables in the report...
It seems that it's not possible in WebI / WebI Rich Client at all...
Thanks!change your query with like
SELECT * FROM TABLE1 WHERE ACCEPTED like :P_ACCEPTED.
and send % as backed value against ALL -
Report header section does not print all pages
Hi,
I have a custom report that consists of all 3 parts. it has a header section, main section, and a trailer section.
I have a problem in a header section that it does not print all pages. It only gives the output of the first page and the last page for the header section.
I open the .rdf file with oracle reports 6i .
what do i need to check please?Please refer the following thread:
http://oracle.ittoolbox.com/groups/technical-functional/oracle-dev-l/report-header-section-does-not-print-all-pages-4166062 -
How to use Print Screen function?
I've seen various descriptions of how to use the print screen function.
It would be nice to actually be told one that works. None have worked for me.
[Fn] and Prt SCr does not work.
Ctrl and Prt SCr does not work.
Ctrl, Alt, and Prt SCr does not work.
[Fn], Ctrl, and Prt SCr does not work.
If anyone knows the correct method of activating the print screen function that would be good.
From the looks of things HP has a big problem with this function.
This question was solved.
View Solution.On my notebook, the Insert key and the prt sc key are the same key, but the prt sc has a ring, around it, if you know what I mean.
On the bottom left of my keyboard is a key that has fn with a ring around it, or I guess you could say it is in a little box. By the way, there are a number of keys that have two functions on them, and to activate the second function, you must press the fn key at the same time as the desired function on the key. In this case press the fn key and the prt scr key, and that puts an image of the screen on the clip board and then it can be pasted into Word or where ever.
Here is somethine else you might like, if you can get it to work as I described above.
To print only the active window, and not the entire desktop or the entire screen, you can do that by pressing the alt and prt sc at the same time. Then it only captures to the clip board the window, and not the entire desktop. Oh, and in the scenario with the fn key, it has to be pressed also, so actually it's pressing the fn and alt and print screen all at once.
I just performed each of the instructions above, and they worked well on my EliteBook 8440.
Hopefully you have the same experience,
GeorgeFN
GeorgeFN
I work on behalf of HP. -
PO Ammendment after release prints only changed materials,need to print all
Dear Sir/Madam,
i'm creating a PO and releasing it using ME9F
Now, when i change the PO, only the changed materials are displyed in the Output.
Now, i got to know that this is the standard process. but my requirement is that all the materials are to be displayed in the output after the change. PLease give your suggestions.This is the standard process. Check the calls to the function module ME_READ_PO_FOR_PRINTING in your print program. The combination of NAST-AENDE & DRUVO (print operation flag) influence the PO items for printing.
When a the purchase order was printed during create PO, NAST-AENDE is blank and paramter DRUVO is set to 1 (New PO) in the print program and this will collect all the PO line items.
When a PO was changed, NAST-AENDE is X, the print program sets DRUVO to 2 and this will collect the PO line items that were changed.
In order to print all the PO line items after the change to the PO, make a change to the print program to set DRUVO to 1 when NAST-AENDE is X.
This will fix your issue.
Manoj -
Add Print Preview function in FB03
Hi Gurus,
I have a requirement to add the print preview function to view payment voucher in FB03.
The scenario is such that whenever user enter the document number in FB03 or access vendor line item (FBL1N) and double click on the line item, system will direct them to FB03 screen. Therefore whenever user does that, they will be able to see the print preview function to view payment voucher and thus print it as and when required.
Currently they have only the spool to view and print and spool could not keep the items for a long time. Therefore this requirement exists.
Thus are there any ways that I could attach a print preview function to the standard SAP FB03? or how do I provide them the view function as and when they need it in the system. The users do not want to have a customise program to have them enter the document number, company code in order to view. They want the function to exist concurrent to the document number anytime whenever they want it.
Need advice.
rgds
eddie limHi
Many thanks for your assistance.
First of all when user run F110, there will be a payment voucher generated together and this will be stored in the spool but spool can only store the information for a certain period of time. This payment voucher has the document number attached to it. Hence the users requirement is that they would want to view the payment voucher as and when required either from vendor line item (FBL1N) or FB03. Currently, there are no such button in FBL1N or FB03 which allow to view payment voucher.
Therefore how can I attach the payment voucher to those accounting document for the users whenever they run vendor line item or FB03 on an ad hoc basis?
They do not want a customise program to key in the document number and view the payment voucher from there. It is double work for them and as such to attach a print preview function to either FBL1N or FB03.
rgds
eddie lim
Maybe you are looking for
-
Iphone 5 battery draining fast
My 22 month old iPhone 5 has suddenly started draining its battery really fast. It loses 70% in 3-4 hours. Nothing has changed in my usage and I haven't upgraded to IOS 7 or 8. My serial number doesn't seem to qualify for the replacement scheme for
-
Laserjet pro 400 dw horizontal printing alignment problem
I have only printed just over 7,000 pages. When it prints it is crooked horizontally across the page. It is on a small home network with a router running wireless. Here is what I've tried: using the on board services option to clean the page. chang
-
Subsequent delivery and subsequent debit
Dear All, material type: NLAG account assignemnt (PO): cost center, non valuated GR Scenario: 1. GR (MIGO) - material_document1, qty 100 2. IR (MIRO) - invoice1 for material_document1, qty 100 > vendor makes correction because qty is more or less tha
-
hi I have a created contract PO but I can not see any committed line items on the cost center (KSB2) or on the project level (CJI5). can anyone help me? thanks
-
Do all updates have to take place in Adobe Application Manager?
Upon opening some Adobe apps, lets pick Acrobat as an example, I get prompted to update to the latest version by a pop-up window with a click-to-download link. Do I do this or should I wait until the AAM tells me there is an update? Will it cause iss