E1000: Intermittent failure when uploading

This week, I activated AT&T's U-verse Internet service (which works well and faster than my previous DSL service). My problem deals primarily with uploading, as follows.
I'm a web developer. I routinely upload files to my server using FTP with Dreamweaver (CS3) on a Mac (OS 10.5). Since my switch from DSL to U-verse (which provided the Linksys E1000 router), half the time I attempt to upload a file or files to the server, the transfer goes quickly. Unfortunately, half the attempts I make get hung up; the progress bar moves verrrrry slowly, then stops and tells me that transfer failed becuse it timed out.
I've reloaded the Linksys E1000 software, hoping to fix this new problem. Sadly, that didn't correct it..
What might cause the E1000's intermittent uploading?  What's a recommended fix?
Thanks, in advance.

Yea, I can't think of anything either. It's clearly not your router since you said that it didn't work when connected directly to your modem. Usually people don't have problems when they connect directly to their modem, but you said that it didn't work at all when you tried that. The other twist was that you said it worked a few times with the router connected. 
If I were in this situation, I would reconfigure my ftp settings from scratch. If that didn't work, then I would contact the ftp server's host and tell them about my problems to see if they had any suggestions. And if that didn't work then I would contact ATT. I'm pretty sure the host would have a lot more information and solutions to fix this issue. 
I don't work for Cisco. I'm just here to help.

Similar Messages

  • Plug-In Failure when uploading images to Trademe

    I'm having the same problem in Safari on Mac OSX 10.7.5. I have Adobe Flash Player 15.0.0.189 installed which seems to be the updated version. In System Preferences > Flash Player > it says that NPAPI Plug-in is installed and that PPAPI Plug-in is not installed. When I try to upload photos to trademe, the online trading site, I get the Plug-in failure message. Would appreciate some advice about how to solve this as soon as possible as it is holding up my work.

    I've branched your issue to a new thread, as the issue is distinct from the one about pressing volume keys on the microphone.
    As a temporary workaround, have you tried Google Chrome?

  • Plug in failure when uploading photos to snapfish

    I want to upload photos to Snapfish to make my Christmas card and I get a simple message "Plug in failure".  I downloaded Adobe flash player and checked certain boxes suggested elsewhere that seem to be logical but nothing is working.  I also restarted my computer hoping that would help but not.  I need a very elementary solution for I am not a computer expert by any means.    Thanks!

    I've branched your issue to a new thread, as the issue is distinct from the one about pressing volume keys on the microphone.
    As a temporary workaround, have you tried Google Chrome?

  • Keyboard - intermittent failures when typing Pavilion d4496t

    Pavilion d4496t
    Intel Dual Core
    While typing, every fifth character or so would fail to type.  Purchased a third party keyboard assuming that the error was with the HP keyboard.
    Error is still apparent.  (I've had to retype several times even in this short description.)
    Any help would be appreciated.  (I'm having a great HP week - tx1000 Laptop dying and now this keyboard issue.)

    Hi Bill,
    I think that your palm area might be touching the touchpad when you are typing faster and that might be making the cursor to jump from one place to the other. Can you please try disabling the touchpad and try typing faster and see whether the issue happens or not? This is not a solution but just to understand what is causing this issue. It definitely does not look like a software or a hardware issue to me with the information you have given. 
    You can disable the touchpad by double tapping the top left corner of it. 
    I am waiting to hear back from you.
    !------------------- Please click the KUDOS star on the left to say 'Thanks'. Please mark 'Accept as Solution' if it answers/solves your problem. Thank you-----------------------------------------------------------------!
    I am an HP Employee. 

  • Why am I getting "Plug-In Failure" when I try to upload content?

    Hey friends...
    As my title says I'm getting "Plug-In Failure" when I try to upload to sites I need to use for work.
    This happened after I used Clean My Mac to free up some space. Evidently I removed an important Flash Player component. Since then I have removed and replaced Flash Player twice.
    I'm still getting the "Plug-In Failure" on sites like Amazon.com, Ribbet.com, and Gotprint.com. It seems to only happen when I try to upload my content.
    I'm running Lion/10.7.5.
    Any suggestions for me?
    Thanks!

    Have you reset your phone? Hold down the home button along with the sleep/wake button until you see the apple, then let go. (No data loss)
    (Most folks here won't know why this is happening)

  • Video degraded when uploaded to Facebook

    Since upgrading to Mavericks, which I did almost immediately after getting my new MacBook Pro 15" Retina Display, video is badly degraded when uploaded to Facebook from iMovie or iphoto. It  looks fine when view in iphoto or imovie, but after sharing right from either of those apps, to facebook, it loses an incredible amount of quality. Is it something in my settings? Or bandwidth from my ISP? My old little 13 macbook created great videos that looked just as good when uploaded to FB. Thanks

    Ther version of Premiere Elements 13 is the version on a MacBook Pro 2.8 GHz Intel Core i7; 16GB 1600 MHz DDR3, NVIDA GeForce GT 750M 2048 MB.  OS X Yosemite version 10.10.2
    When loading to Facebook the processing finishes - the progress meter gets to the end. The Error Message pops up at the end.
    Vimeo and YouTube built in Premiere Elements feature work?
    - I only tried YouTube but that did not work either.
    What specific error messages are you getting with the Facebook failures?
    - The error pop up message is above
    BUT....  What did work was mentioned in this chain.
    I exported the image to an MP4 video then saved it onto my HD. The imported the image to Facebook

  • MPR testing is passed, but failed when upload Result Package to verify.

    Hi,
    I am attempting to certify our application using MPR-Test-Tool v4.6 for Windows Server 2012 R2.
    The MPR tool shows the testing Pass, and generated a .zip Result Package.
    But it's failed when uploads the .zip Result Package to verify in MPR web-site "Test My Apps" page, both Silver and Gold level are failed.
    In the "Test My Apps" page, I couldn't find the reason, error message or some hint for the failure.
    I am appreciate any help,
    Regards.
    Regards,

    Hello,
    Please check if you import the certificate into the Exchange server "Trusted Root Certificates".
    If there is a CA server in your domain, you also need to import your certificate into the trusted root certificates on the CA server.
    Cara Chen
    TechNet Community Support

  • Error when uploading file :( Return code = 6 )

    Hello All,
    Getting the bleow mentioned error in LSMW.
    Error when uploading file Return code = 6 )
    Is it related to access. please suggest.

    Hi,
    If the Sy-Subrc is 0 then Success,
             Sy-SUBRC is 4 then failure,
             Sy-SUBRC = 6 then the user might be not access to read the file.
    This is due to authorization issue.

  • Code doesn't update when uploading new files to website.

    code doesn't update when uploading new files to website.   I was using an old DW version for a long time then forced to upgrade when I bought my MacBook Pro. Now when I make changes to my pages and link to new files etc on my harddrive, when i upload the pages it won't image because the code still points to harddrive (this did not used to be a problem)... I manually changed the code on the web host site to point to the site and it loaded fine. But now my files on my harddrive also point to the web host files and now don't image on my computer. I never had to worry about this so far and wonder if the new version has a setting I'm supposed to be aware of so that I can design on my hardrive and upload and it knows that the files are being uploaded with it?  Ugh hpe this makes sense - I'm NOT a webs designer and the new DW is way more than I use in it's technology.

    Hi
    This sounds like you have not defined your site in the site definition.
    Follow the steps in these 2 tutorials to set-up your site locally and for the remote server -
    http://www.adobe.com/devnet/dreamweaver/articles/first_website_pt1.html
    http://www.adobe.com/devnet/dreamweaver/articles/first_website_pt6.html
    PZ

  • I am getting a error IO when trying to upload multiple images within wordpress using the flash uploader. I do not get the error when uploading using explorer. The error only appears if I try uploading using firefox....any ideas?

    I am getting a error IO when trying to upload multiple images within wordpress using the flash uploader. I do not get the error when uploading using explorer. The error only appears if I try uploading using firefox....any ideas?

    Logged the call with SAP who directed me to 'Define settings for attachments' in IMG and setting the 'Deactivate Java Applet' & 'Deactivate Attachment versioning' checkboxes - problem solved.

  • Cfmail  - works locally but not when uploaded

    Hi,
    I'm using cfmail with form variables for the email addreses.
    It's so users can send email to political candidates. Here's the
    code:
    <cfoutput>#Form.semails#</cfoutput>,<cfoutput>#Form.hemails#</cfoutput></p>
    <cfmail to="#Form.semails#,#Form.hemails#"
    replyto="#Form.useremail#" failto="[email protected]"
    from="#Form.useremail#" subject="Keep Maine Toxin-Free!"
    server="mail.nosuch.com" port="26" timeout="40"
    username="[email protected]" password="nosuch">
    #Form.usermessage#
    </cfmail>
    The form submit page collects those variables and passes them
    as form variables - GET. The "to" field in cfmail is populated by
    hidden fields that contain session variables... they're forwarded
    on as those .semails and .hemails form variables. Actual values
    have been replaced with "none" or "nosuch" for security, but you
    can see the structure anyway.
    This works when run locally, sends the emails as it should.
    When uploaded exactly as is to godaddy's server, it doesn't send
    emails. Doesn't throw any errors, the form results page displays as
    it should... but the emails just never get sent.
    I'd really appreciate any ideas...
    Joe

    Adam Cameron wrote:
    > I don't know how these shared hosting outfits work, and
    what access you
    > have to what, but here's some questions:
    >
    > - have you inspected the mail logs to see if they cast
    any light on the
    > scene
    > - have you configured CF to tell it where the SMTP
    server is?
    > - do you need to authenticate to it, and that sort of
    thing?
    > - are the email messages failing @ the CF end (in which
    case they'll be in
    > the mail/undeliverable dir (not entirely sure that's the
    name of it, but
    > have a shufti around in the cfusion dir...), or are they
    getting to the
    > SMTP server and failing there (check the SMTP server's
    logs).
    >
    Unfortunately all that can't be done by us users of these
    shared hosting
    outfits. You'll need to contact GoDaddy support and ask them
    to take
    these steps. I'm sorry about your probably experience with
    this.
    While I use GoDaddy for my personal hosting where I care more
    about not
    spending a great deal of money over high performance. I do
    not wish my
    support experiences on anybody. If you know ColdFusion well
    and can
    tell support what needs to be done, they should be able to do
    it. Or,
    more likely, you would be able to figure out the self help
    tools to do
    it yourself. But, unless this has changed since my last
    experience,
    their support staff is not ColdFusion literate and are unable
    to guide
    other, inexperienced ColdFusion users.
    Saying all that. Email works just fine on my GoDaddy website
    and I do
    not believe I had to do anything special to use it.

  • "file does not exist on remote server" when uploading image

    As the title says, when uploading an image im getting the
    message "file does not exist on remote server"......yet dreamwever
    has uploaded the file, its there. All other pages on my website
    work fine when uploading images. Any ideas?

    What image type is it? Is it in an images folder or the root
    directory? It would be helpful to post a link.

  • When uploading my formatted resume to my Apple Jobs profile, I am always presented with a c:\fakepath message and the resume does not upload. How can I rectify this?

    When uploading my formatted resume to my Apple Jobs profile, I am always presented with a c:\fakepath message and the resume does not upload. How can I rectify this?

    Add this one to the list of thinks that don't work on the Apple Job Board. It looks like Apple is using ADP's VE (Virtual Edge) technology to run this system, and I've been stupified by the number of features that are just broken, or so poorly thought out by ADP as to be unusable, (certainly for webkit and mozilla browsers at least: I didn't bother checking IE.)
    Here are a few highlights:
    "My Job List", list of jobs applied for, seems to max out at three. You can apply for more than that, but you can only see the first three.
    "Search Using Your Resume" feature yields few or no results, even when the pasted text contains only common, exactly matched words like 'Design' or 'Engineer'.
    The missing resume upload, described in this thread.
    "My Job Agent" seems to never flag anything, at least it hasn't ever for me despite pretty loose criteria.
    Agent's created using "My Job Agent" eventually just disappear, which is fine because they don't seem to work.
    When updating a profile, acknowledging the 'Terms' happens twice in a row. 
    Job seekers can only supply one cover letter despite being able apply for several jobs.
    Pagination for search results only appears at the top of the page, so it's necessary to scroll down through each page, then up to the top again to proceed to the next page.
    Well, I'm sure there are others, but you get the idea. I hope the Apple folks can fix this, (or twist ADP's arm to fix it,) so it better represents the quality of experience that Apple is so respected for consistently delivering.

  • How do I change the default folder that opens when uploading a file to the internet from my mac? (at the moment it automatically defaults to 'Downloads' folder)

    How do I change the default folder that opens when uploading a file to the internet from my mac? (at the moment it automatically defaults to 'Downloads' folder)
    For example...
    I am on a webiste and wish to upload a photo.
    I click on select file on the website
    Finder opens and defaults to 'Downloads' folder (it happens with all wesbites)
    How do I change this?

    I am on a webiste and wish to upload a photo.
    I click on select file on the website
    You are attempting to download the picture to your computer not uploading photo to the website if I am understanding you correctly.
    To change the download direction, you must do so through your browser's Preferences.  If you are using Safari, hopefully, someone who uses Safari will help you and/or post over in their forums.  I do not use Safari.
    If using Firefox>Preferences>General>Save Files to:

  • Error when uploading a document to SharePoint

    When uploading a file into a document library using the copy service CopyIntoItems method, I get a "There is an error in XML document (6, 3763)" (numbers variable) when the file has illegal characters in the comments of the file properties.
    e.g., "ø;". Removing the comments from the file properties fixes the problem.
    I don't need the comments to get uploaded, so how do I copy the file and ignore the comments?

    Hello,
    I think you can't ignore file properties but you can clean them. Use FileInfo class to extract file properties then remove special char. You also need to make sure that there is no special char in file name as well.
    Refer this link:
    http://charlesemes.blogspot.sg/2011/08/moving-crm-attachments-to-sharepoint.html
    http://sharepoint.stackexchange.com/questions/34953/uploading-files-to-sharepoint-containing-the-ampersand-character
    Hope it could help
    Hemendra:Yesterday is just a memory,Tomorrow we may never see
    Please remember to mark the replies as answers if they help and unmark them if they provide no help

Maybe you are looking for