E71 - help needed for basic set up questions
I have just purchased an E71 - a big jump from the last mobile (pre camera era)
But Im lost on this. I ordered the phone online, so Im not sure where to go to get help and instruction about the phone and how to set it up properly and use it. Mannuals aren't my best option. Im in Australia,.
Is there a Nokia store where I can go to help with setting it up?
Does my phone come with a internet security or do I have to purchase it?
Thanks
Elven
Solved!
Go to Solution.
Awesome vansharma and kingpin007 - thankyou for your help.
The PUK was with the mobile operator, so I rang them and after a security check procedure I was able to enter the PUK code and get the phone unlocked. Phew!
I checked the Security Warning Web Setting (as you said kingpin007), and the web alert was marked to ON already - so no problems there.
I also registered at Mosh, (the planets must be badly aspected - that took me 12 attempts LOL) and they have one security download NetQin Moble Anti-virus.
http://mosh.nokia.com/content/61D5A2C3BF97604AE040050A44301BA2
I guess I am questioning weather or not the phone comes installed with any antivirus or security safeguards factory installed ... is my phone secure on the web/emailing/downloading etc. if I dont install the NetQin or something similar?
In the mannual it says this:
"Important: Your device can only support one antivirus application. Having more than one application with antivirus functioning could affect performance and operation and cause the devise to stop functioning"
And presently I trialled the free 7 day 'F7' security application that was a standard downloaded to the phone - but it is too costly for me to subscribe to - it has another day before it runs out, so I am thinking I should wait until it expires before considering dowloading any other security application. Does that sound like the right thing to do?
Well at least Im back to square One with this all ...
Im sure I'll have more questions as I try to work this all out.
Thanks for your help so far ..
Cheers
Elven
Message Edited by elven on 25-Mar-2009 11:26 AM
Message Edited by elven on 25-Mar-2009 11:30 AM
Similar Messages
-
Help needed for hash_area_size setting for Datawarehouse environment
We have an Oracle 10g Datawarehousing environment , running on 3 - node RAC
with 16 GB RAM & 4 CPUs each and roughly we have 200 users and night jobs running on this D/W .
We find that query performance of all ETL Processes & joins are quite slow .
How much should we increase the value of hash_area_size parameter for this Datawarehouse environment ? This is a Production database, with Oracle Database 10g Enterprise Edition Release 10.1.0.5.0.
We use OWB 10g Tool for this D/W and we need to change the hash_area_size to increase the performance of the ETL Processes.
This is the Oracle init parameter settings used, as shown below : -
Kindly suggest ,
Thanks & best regards ,
===========================================================
ORBIT
__db_cache_size 1073741824
__java_pool_size 67108864
__large_pool_size 318767104
__shared_pool_size 1744830464
optimizercost_based_transformation OFF
active_instance_count
aq_tm_processes 1
archive_lag_target 0
asm_diskgroups
asm_diskstring
asm_power_limit 1
audit_file_dest /dboracle/orabase/product/10.1.0/rdbms/audit
audit_sys_operations FALSE
audit_trail NONE
background_core_dump partial
background_dump_dest /dborafiles/orbit/ORBIT01/admin/bdump
backup_tape_io_slaves TRUE
bitmap_merge_area_size 1048576
blank_trimming FALSE
buffer_pool_keep
buffer_pool_recycle
circuits
cluster_database TRUE
cluster_database_instances 3
cluster_interconnects
commit_point_strength 1
compatible 10.1.0
control_file_record_keep_time 90
control_files #NAME?
core_dump_dest /dborafiles/orbit/ORBIT01/admin/cdump
cpu_count 4
create_bitmap_area_size 8388608
create_stored_outlines
cursor_sharing EXACT
cursor_space_for_time FALSE
db_16k_cache_size 0
db_2k_cache_size 0
db_32k_cache_size 0
db_4k_cache_size 0
db_8k_cache_size 0
db_block_buffers 0
db_block_checking FALSE
db_block_checksum TRUE
db_block_size 8192
db_cache_advice ON
db_cache_size 1073741824
db_create_file_dest #NAME?
db_create_online_log_dest_1 #NAME?
db_create_online_log_dest_2 #NAME?
db_create_online_log_dest_3
db_create_online_log_dest_4
db_create_online_log_dest_5
db_domain
db_file_multiblock_read_count 64
db_file_name_convert
db_files 999
db_flashback_retention_target 1440
db_keep_cache_size 0
db_name ORBIT
db_recovery_file_dest #NAME?
db_recovery_file_dest_size 2.62144E+11
db_recycle_cache_size 0
db_unique_name ORBIT
db_writer_processes 1
dbwr_io_slaves 0
ddl_wait_for_locks FALSE
dg_broker_config_file1 /dboracle/orabase/product/10.1.0/dbs/dr1ORBIT.dat
dg_broker_config_file2 /dboracle/orabase/product/10.1.0/dbs/dr2ORBIT.dat
dg_broker_start FALSE
disk_asynch_io TRUE
dispatchers
distributed_lock_timeout 60
dml_locks 9700
drs_start FALSE
enqueue_resources 10719
event
fal_client
fal_server
fast_start_io_target 0
fast_start_mttr_target 0
fast_start_parallel_rollback LOW
file_mapping FALSE
fileio_network_adapters
filesystemio_options asynch
fixed_date
gc_files_to_locks
gcs_server_processes 2
global_context_pool_size
global_names FALSE
hash_area_size 131072
hi_shared_memory_address 0
hpux_sched_noage 0
hs_autoregister TRUE
ifile
instance_groups
instance_name ORBIT01
instance_number 1
instance_type RDBMS
java_max_sessionspace_size 0
java_pool_size 67108864
java_soft_sessionspace_limit 0
job_queue_processes 10
large_pool_size 318767104
ldap_directory_access NONE
license_max_sessions 0
license_max_users 0
license_sessions_warning 0
local_listener
lock_name_space
lock_sga FALSE
log_archive_config
log_archive_dest
log_archive_dest_1 LOCATION=+ORBT_A06635_DATA1_ASM/ORBIT/ARCHIVELOG/
log_archive_dest_10
log_archive_dest_2
log_archive_dest_3
log_archive_dest_4
log_archive_dest_5
log_archive_dest_6
log_archive_dest_7
log_archive_dest_8
log_archive_dest_9
log_archive_dest_state_1 enable
log_archive_dest_state_10 enable
log_archive_dest_state_2 enable
log_archive_dest_state_3 enable
log_archive_dest_state_4 enable
log_archive_dest_state_5 enable
log_archive_dest_state_6 enable
log_archive_dest_state_7 enable
log_archive_dest_state_8 enable
log_archive_dest_state_9 enable
log_archive_duplex_dest
log_archive_format %t_%s_%r.arc
log_archive_local_first TRUE
log_archive_max_processes 2
log_archive_min_succeed_dest 1
log_archive_start FALSE
log_archive_trace 0
log_buffer 1167360
log_checkpoint_interval 0
log_checkpoint_timeout 1800
log_checkpoints_to_alert FALSE
log_file_name_convert
logmnr_max_persistent_sessions 1
max_commit_propagation_delay 700
max_dispatchers
max_dump_file_size UNLIMITED
max_enabled_roles 150
max_shared_servers
nls_calendar
nls_comp
nls_currency #
nls_date_format DD-MON-RRRR
nls_date_language ENGLISH
nls_dual_currency ?
nls_iso_currency UNITED KINGDOM
nls_language ENGLISH
nls_length_semantics BYTE
nls_nchar_conv_excp FALSE
nls_numeric_characters
nls_sort
nls_territory UNITED KINGDOM
nls_time_format HH24.MI.SSXFF
nls_time_tz_format HH24.MI.SSXFF TZR
nls_timestamp_format DD-MON-RR HH24.MI.SSXFF
nls_timestamp_tz_format DD-MON-RR HH24.MI.SSXFF TZR
O7_DICTIONARY_ACCESSIBILITY FALSE
object_cache_max_size_percent 10
object_cache_optimal_size 102400
olap_page_pool_size 0
open_cursors 1024
open_links 4
open_links_per_instance 4
optimizer_dynamic_sampling 2
optimizer_features_enable 10.1.0.5
optimizer_index_caching 0
optimizer_index_cost_adj 100
optimizer_mode ALL_ROWS
os_authent_prefix ops$
os_roles FALSE
parallel_adaptive_multi_user TRUE
parallel_automatic_tuning TRUE
parallel_execution_message_size 4096
parallel_instance_group
parallel_max_servers 80
parallel_min_percent 0
parallel_min_servers 0
parallel_server TRUE
parallel_server_instances 3
parallel_threads_per_cpu 2
pga_aggregate_target 8589934592
plsql_code_type INTERPRETED
plsql_compiler_flags INTERPRETED
plsql_debug FALSE
plsql_native_library_dir
plsql_native_library_subdir_count 0
plsql_optimize_level 2
plsql_v2_compatibility FALSE
plsql_warnings DISABLE:ALL
pre_page_sga FALSE
processes 600
query_rewrite_enabled TRUE
query_rewrite_integrity enforced
rdbms_server_dn
read_only_open_delayed FALSE
recovery_parallelism 0
remote_archive_enable TRUE
remote_dependencies_mode TIMESTAMP
remote_listener
remote_login_passwordfile EXCLUSIVE
remote_os_authent FALSE
remote_os_roles FALSE
replication_dependency_tracking TRUE
resource_limit FALSE
resource_manager_plan
resumable_timeout 0
rollback_segments
serial_reuse disable
service_names ORBIT
session_cached_cursors 0
session_max_open_files 10
sessions 2205
sga_max_size 3221225472
sga_target 3221225472
shadow_core_dump partial
shared_memory_address 0
shared_pool_reserved_size 102760448
shared_pool_size 318767104
shared_server_sessions
shared_servers 0
skip_unusable_indexes TRUE
smtp_out_server
sort_area_retained_size 0
sort_area_size 65536
sp_name ORBIT
spfile #NAME?
sql_trace FALSE
sql_version NATIVE
sql92_security FALSE
sqltune_category DEFAULT
standby_archive_dest ?/dbs/arch
standby_file_management MANUAL
star_transformation_enabled TRUE
statistics_level TYPICAL
streams_pool_size 0
tape_asynch_io TRUE
thread 1
timed_os_statistics 0
timed_statistics TRUE
trace_enabled TRUE
tracefile_identifier
transactions 2425
transactions_per_rollback_segment 5
undo_management AUTO
undo_retention 7200
undo_tablespace UNDOTBS1
use_indirect_data_buffers FALSE
user_dump_dest /dborafiles/orbit/ORBIT01/admin/udump
utl_file_dir /orbit_serial/oracle/utl_out
workarea_size_policy AUTOThe parameters are already unset in the environment, but do show up in v$parameter, much like shared_pool_size is visible in v$parameter despite only sga_target being set.
SQL> show parameter sort
NAME TYPE VALUE
sortelimination_cost_ratio integer 5
nls_sort string binary
sort_area_retained_size integer 0
sort_area_size integer 65536
SQL> show parameter hash
NAME TYPE VALUE
hash_area_size integer 131072
SQL> exit
Only set hash_area_size and sort_area_size should only be set when not using automatic undo, which is not supported in EBS databases.
Database Initialization Parameters for Oracle Applications 11i
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=216205.1 -
Hello,
I set up the netweaver sneak version with EP6.0 SP9 and WAS6.40. Then I installed the ESS (BPESS46C504_0-20000613) and configured a system to connect to the backend. This system configuration was tested and it was successful. But when I invoke the "Record Working Time" iview, I got the following error. Which configuration did I miss?
By the way, could you tell me where I can find the document for this ESS business package.
Thanks in advance,
Jinsong
Here is the error message:
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
Application URL ':///catw/!' is not valid! Please check the protocol and host entries for system 'SAPPROJ'..
See the details for the exception ID in the log file
com.sap.portal.appintegrator.sap.IAC::IAC/HTTPRenderLayer
Parameter Dump
$StopAt
AlertSessionManagementMismatch true
ApplicationParameter
Authentication ******
ClassName com.sapportals.portal.appintegrator.layer.HTTPRenderLayer
CodeLink com.sap.portal.appintegrator.sap.bwc.IAC
CustomerExit.ParameterProvider false
DebugMode false
DebugMode.default false
DebugMode.type boolean
DynamicParameter
ExportParameters
ForcedRequestLanguage en
IAC catw
LAF iac
LogonMethod UIDPW
LogonUserID jlu
MandatoryParameters URL, RequestTarget, RequestMethod, ShowLoadingMessage
MappedPassword ******
MappedUser jlu
NavPathUpdate false
NextLayer NoLayer
ObscureRequest true
ObscureRequest.default false
ObscureRequest.type boolean
OptionalParameters RequiresIsolation, ScriptIncludes
Request
RequestMethod POST
RequestMethod.default GET
RequestMethod.type select[GET, POST]
RequestTarget Redirect
RequestTarget.default Redirect
RequestTarget.type select[Redirect, Iframe]
ScriptIncludes swf2epcf.js?6020.0.6
ShowLoadingMessage false
ShowLoadingMessage.default false
ShowLoadingMessage.type boolean
System SAPPROJ
TopLayer IAC/SSOLayer
URL :///catw/!?sap-client=010&client=010&sap-language=en&language=en&sap-accessibility=&accessibility=0&DesignBaseUrl=http%3A%2F%2Fdotnet-sjc%3A50000%2Firj%2Fportalapps%2Fcom.sap.portal.themes.lafservice%2Fthemes%2Fits&design=sap_tradeshow&sap-user=jlu&sap-password=aa&login=jlu&password=aa&mysapcomusesso2cookie=0
Use_CustomerExit_ParameterProvider false
User
UserMappingTemplate sap-user=<MappedUser>&sap-password=<MappedPassword>&login=<MappedUser>&password=<MappedPassword>&~mysapcomusesso2cookie=0
Wizard.MandatoryParameters System, IAC
Wizard.OptionalParameters ApplicationParameter
buildTree false
com.sap.portal.reserved.iview.IsolationMode URL
com.sap.portal.reserved.iview.ParamList *,NavigationTarget,standAlone,NavTargetAsRoot,tree
com.sap.portal.reserved.iview.WizardURL pcd:portal_content/com.sap.pct/admin.templates/iviews/editors/com.sap.portal.defaultIViewWizard
windowId WID1107456920161
com.sap.portal.appintegrator.sap.IAC::IAC/HTTPRenderLayer
MandatoryParameters
URL
RequestTarget Redirect Iframe
RequestMethod GET POST
ShowLoadingMessage No Yes
OptionalParameters
RequiresIsolation
ScriptIncludes
Message was edited by: Jinsong LuHi,
I fixed this problem by changing the permissions on System to include Everyone. Now I am getting different error.
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
com/sapportals/portal/pb/utils/RedirectData.
Exception id: 04:32_26/01/06_0071_2755950
See the details for the exception ID in the log file
In log file the error is ...
#1.5#0002553A11CD005200000033000AC19400040B498CE8F806#1138310431437#com.sap.portal.portal#sap.com/irj#com.sap.portal.portal#SANTOSH.#1041##nadcp949_LPD_2755950#Guest#5d4c2d808eb111dace880002553a11cd#SAPEngine_Application_Thread[impl:3]_23##0#0#Error#1#/System/Server#Java###Exception ID:04:20_26/01/06_0070_2755950
[EXCEPTION]
#1#com.sapportals.portal.prt.runtime.PortalRuntimeException: PortalRuntimeException
at com.sapportals.portal.prt.core.PortalRequestManager.handleRequestException(PortalRequestManager.java(Compiled Code))
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java(Compiled Code))
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java(Compiled Code))
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java(Compiled Code))
at java.security.AccessController.doPrivileged1(Native Method)
at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code))
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java(Compiled Code))
at javax.servlet.http.HttpServlet.service(HttpServlet.java(Compiled Code))
at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java(Compiled Code))
at javax.servlet.http.HttpServlet.service(HttpServlet.java(Compiled Code))
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java(Compiled Code))
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java(Compiled Code))
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java(Inlined Compiled Code))
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java(Compiled Code))
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java(Compiled Code))
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java(Compiled Code))
at com.sap.engine.services.httpserver.server.Client.handle(Client.java(Inlined Compiled Code))
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java(Compiled Code))
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java(Compiled Code))
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java(Compiled Code))
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java(Compiled Code))
at java.security.AccessController.doPrivileged1(Native Method)
at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code))
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code))
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code))
Caused by: java.lang.NoClassDefFoundError: com/sapportals/portal/pb/utils/RedirectData
at com.sapportals.portal.appintegrator.layer.HTTPRenderLayer.getPageRedirectObject(HTTPRenderLayer.java:282)
at com.sapportals.portal.appintegrator.layer.HTTPRenderLayer.processLayer(HTTPRenderLayer.java:101)
at com.sapportals.portal.appintegrator.LayerProcessor.processActionPass(LayerProcessor.java(Compiled Code))
at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doOnPOMReady(AbstractIntegratorComponent.java:71)
at com.sapportals.portal.prt.component.AbstractPortalComponent.handleEvent(AbstractPortalComponent.java(Compiled Code))
at com.sapportals.portal.prt.pom.ComponentNode.handleEvent(ComponentNode.java(Compiled Code))
at com.sapportals.portal.prt.pom.PortalNode.fireEventOnNode(PortalNode.java(Compiled Code))
at com.sapportals.portal.prt.pom.PortalNode.processEventQueue(PortalNode.java(Compiled Code))
... 24 more
can anyone please help me with this?? -
Color management help needed for adobe CS5 and Epson printer 1400-Prints coming out too dark with re
Color management help needed for adobe CS5 and Epson printer 1400-Prints coming out too dark with reddish cast and loss of detail
System: Windows 7
Adobe CS5
Printer: Epson Stylus Photo 1400
Paper: Inkjet matte presentation paper with slight luster
Installed latest patch for Adobe CS5
Epson driver up to date
After reading solutions online and trying them for my settings for 2 days I am still unable to print what I am seeing on my screen in Adobe CS5. I calibrated my monitor, but am not sure once calibration is saved if I somehow use this setting in Photoshop’s color management.
The files I am printing are photographs of dogs with lots of detail I digitally painted with my Wacom tablet in Photoshop CS5 and then printed with Epson Stylus 1400 on inkjet paper 20lb with slight luster.
My Printed images lose a lot of the detail & come out way to dark with a reddish cast and loss of detail when I used these settings in the printing window:
Color Handling: Photoshop manages color, Color management -ICM, OFF no color adjustment.
When I change to these settings in printer window: Color Handling: Printer manages color. Color management- Color Controls, 1.8 Gamma and choose Epson Standard it prints lighter, but with reddish cast and very little detail and this is the best setting I have used so far.
Based on what I have read on line, I think the issue is mainly to do with what controls are set in the Photoshop Color Settings window and the Epson Printer preferences. I have screen images attached of these windows and would appreciate knowing what you recommend I enter for each choice.
Also I am confused as to what ICM color management system to use with this printer and CS5:
What is the best ICM to use with PS CS5 & the Epson 1400 printer? Should I use the same ICM for both?
Do I embed the ICM I choose into the new files I create?
Do I view all files in the CS5 workspace in this default ICM?
Do I set my monitor setting to the same ICM?
If new file opens in CS5 workspace and it has a different embedded profile than my workspace, do I convert it?
Do I set my printer, Monitor and PS CS5 color settings to the same ICM?
Is using the same ICM for all devices what is called a consistent workflow?
I appreciate any and all advice that can be sent my way on this complicated issue. Thank you in advance for your time and kind help.It may be possible to figure out by watching a Dr.Brown video on the subject of color printing. Adobe tv
I hope this may help............... -
Help need for force to signout All session ! how...
hi
help need for force to signout All session ! how ??
Solved!
Go to Solution.Hi and welcome to the Skype Community,
To force a signout of all instances your Skype is signed into please change your password: https://support.skype.com/en/faq/FA95/how-do-i-change-my-password
Follow the latest Skype Community News
↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓ -
help needed for writing query
i have the following tables(with data) as mentioned below
FK*-foregin key (SUBJECTS)
FK**-foregin key (COMBINATION)
1)SUBJECTS(table name)
SUB_ID(NUMBER) SUB_CODE(VARCHAR2) SUB_NAME (VARCHAR2)
2 02 Computer Science
3 03 Physics
4 04 Chemistry
5 05 Mathematics
7 07 Commerce
8 08 Computer Applications
9 09 Biology
2)COMBINATION
COMB_ID(NUMBER) COMB_NAME(VARCHAR2) SUB_ID1(NUMBER(FK*)) SUB_ID2(NUMBER(FK*)) SUB_ID3(NUMBER(FK*)) SUBJ_ID4(NUMBER(FK*))
383 S1 9 4 2 3
384 S2 4 2 5 3
---------I actually designed the ABOVE table also like this
3) a)COMBINATION
COMB_ID(NUMBER) COMB_NAME(VARCHAR2)
383 S1
384 S2
b)COMBINATION_DET
COMBDET_ID(NUMBER) COMB_ID(FK**) SUB_ID(FK*)
1 383 9
2 383 4
3 383 2
4 383 3
5 384 4
6 384 2
7 384 5
8 384 3
Business rule: a combination consists of a maximum of 4 subjects (must contain)
and the user is less relevant to a COMB_NAME(name of combinations) but user need
the subjects contained in combinations
i need the following output
COMB_ID COMB_NAME SUBJECT1 SUBJECT2 SUBJECT3 SUBJECT4
383 S1 Biology Chemistry Computer Science Physics
384 S2 Chemistry Computer Science Mathematics Physics
or even this is enough(what i actually needed)
COMB_ID subjects
383 Biology,Chemistry,Computer Science,Physics
384 Chemistry,Computer Science,Mathematics,Physics
you can use any of the COMBINATION table(either (2) or (3))
and i want to know
1)which design is good in this case
(i think SUB_ID1,SUB_ID2,SUB_ID3,SUB_ID4 is not a
good method to link with same table but if 4 subjects only(and must) comes
detail table is not neccessary )
now i am achieving the result by program-coding in C# after getting the rows from oracle
i am using oracle 9i (also ODP.NET)
i want to know how can i get the result in the stored procedure itsef.
2)how it could be designed in any other way.
any help/suggestion is welcome
thanks for your time --PradeeshWell I forgot the table-alias, here now with:
SELECT C.COMB_ID
, C.COMB_NAME
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID1) AS SUBJECT_NAME1
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID2) AS SUBJECT_NAME2
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID3) AS SUBJECT_NAME3
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID4) AS SUBJECT_NAME4
FROM COMBINATION C;
As you need exactly 4 subjects, the columns-solution is just fine I would say. -
File missing (file\BCD error code 0Xc0000034 help need for work!
file missing (file\BCD error code 0Xc0000034 help need for work! what can i do?
have an p 2000 notebook pcHi bobkunkle, welcome to the HP Forums. I understand you cannot boot passed the error you are receiving.
What is the model or product number of your notebook? What version of Windows is installed?
Guide to finding your product number
Which Windows operating system am I running?
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping! -
Help needed for using BASIC authentication through JDBCRealm
Help needed.
Hello,
I am doing a degree project, so far it works fine in my local machine, I need to try it on my virtual hosting (as it is a live server).
My project requires JDBCRealm, that is BASIC authentication loading access data from mysql database. Normally this setup can be done in Server.xml file, because my Tomcat hosting is a virtual one, I only have permission to access the web.xml file.
My question is: is it possible to get it done in an alternative way? In web.xml? Some properties file maybe?
Thank you very much.You can set this up for your context using META-INF/context.xml instead of working with server.xml.
Make a directory called META-INF under your webapp ( it'll be at the same level as WEB-INF ). Under this, add a context.xml with all your context specific configuration including the realm. A sample is below
<?xml version="1.0" encoding="UTF-8"?>
<Context path="/myApp" reloadable="true">
<Realm
className="org.apache.catalina.realm.JDBCRealm"
driverName="com.microsoft.jdbc.sqlserver.SQLServerDriver"
connectionURL="jdbc:microsoft:sqlserver://127.0.0.1:1433;DatabaseName=myDB;SelectMethod=Cursor;"
connectionName="username" connectionPassword="password"
digest="MD5" userTable="users" userNameCol="userid" userCredCol="userpassword"
userRoleTable="user_roles" roleNameCol="rolename"
/>
</Context>Hope this helps.
People on the forum help others voluntarily, it's not their job.
Help them help you.
Learn how to ask questions first: http://faq.javaranch.com/java/HowToAskQuestionsOnJavaRanch
---------------------------------------------------------------- -
Help Needed Configuring Post Set Up For Big Indie Feature:
We’ve got incredible performances from an amazing cast of well-known character actors from film, TV and stage, a unique and inspiring script, and some truly beautiful, cinematic footage. And now — it’s all about putting it together…
But I’m having trouble finding an accurate, effective and (most importantly) a DETAILED workflow accommodating the latest version of Premiere, to post a LENGHTY feature film shot on the RED Epic in 5k FF. I’ve reviewed videos here, but in conducting edit tests, I'm encountering all manner of glitches and problems, and need to ensure that I am properly configuring our post workflow and all of the associated hardware.
I’ll be dividing the film into project file “reels” to help keep things manageable. As editor and DP, it's also most important for me to edit on a 4k timeline (to take advantage of reframing and stabilization of the 5k). Footage is on three Pegasus II RAIDS.
There will be a LOT of FX work done outside of Premiere in AE (and other compositing and graphics programs). I’m planning to finish in Resolve, outputting at 4k.
I have the new Mac Pro with:
- 2.7GHz 12-core Intel Xeon E5 with 30MB of L3 cache
- 64GB (4x16GB) of 1866MHz DDR3 ECC - 4X16GB
- 1TB PCIe-based flash storage
- Dual AMD FirePro D700 GPUs with 6GB of GDDR5 VRAM each
A Sonnet Echo Express III Desktop 3-Slot (with Thunderbolt upgrade) housing the following:
- Red Rocket
- Connection card for HP LTO5 Ultrium 3000 Sas Ext Tape Drive
If needed, I’m open to acquiring other cards or hardware, too (possibly adding the Red Rocket-X to the mix). And if the referral of a PAID individual with firsthand knowledge of such a setup – to at least help with the initial set up and configuration – is what I need, I’m open to that, as well.
We truly have an amazingly powerful compilation of principal photography, and a great story to tell — I just need to overcome this major hurdle of setting up our post. As a somewhat newbie to Premiere, I greatly appreciate any advice, pointing-me-in-the-right-direction, or suggestions of individuals to help oversee this for compensation and screen credit that anyone can offer me here...
Many Thanks,
BillOooh...big involved questions and many of them.
If it helps..
A few things I know I would do before even starting on the actual film edit
..is give the new system a massive shakedown.
Thrash the hardware and software with test footage , graphics and audio etc.
Test the pipelines and workflows.
Set up a BACKUP routine. DO NOT RELY ON AUTOSAVES
Would NOT do O.S updates once started with a stable system.
Me...I would not use a Dynamic Link workflow for FX. (I would use D.Is)
Would create a flow chart plan for the edit and post prod to avoid generation losses, efficiencies and scheduling.
Work toward lock downs before FX , audio, CC and Grade. (Avoid the trap of being creatively impatient for the benefit of a smooth edit experience)
Sort this first...
I'm encountering all manner of glitches and problems, and need to ensure that I am properly configuring our post workflow and all of the associated hardware.
You might want to specify some of this stuff and see if you get answers here or elsewhere..
Suggestion - can you wait for next version of PPro ? - coming very soon evidently. Start with latest version so you don't need to update midstream. A feature takes a long time to post and some cool new features may help. eg Master Clip enhanced.
Have you considered Prelude in the workflow to log and set up your project. ( Never used it myself but I would consider/investigate it for long form)
Good luck and enjoy the edit process. -
Technical help needed for button click
Hi All,
Im new to abap, just now started working in my first project. I need some help and start from you.
In my webdynpro component FPM_OIF_COMPONENT : CNR_VIEW, Participate button is there,
so by default u201CCreate Responseu201C button is grayed out. By clicking the participate button, I need to enable the create response button. For this requirement, I need to create a custom class with two static methods : setvalue and getvalue methods. In that methods I need to set the variable = X, if participate button is pressed. And when loading WDDOMODIFY VIEW method, I need to check the value of the variable, if the value is X, then create response button will be enabled.
For this logic, Can you please frame some sample code.
Or please guide me throug some materials.
Please help me in this regard.
Regards,
Rani.
Moderator message: moved from ABAP forums.
Edited by: Thomas Zloch on Jun 29, 2011 11:14 PMHi Rani,
I understand you are new to ABAP basically the webdynpro questions are posted in webdynpro-ABAP, Forums going forward you should adapt the same practice to get a better response.
As you said u201CCreate Responseu201C button is already grayed out it must be already linked to attribute of type wdy_boolean
check the "enable property" of the button.
Coming to your question :
In the "OnAction" event of Participate button write a method for example get value
"Make the attribute" linked to create response button as abap_true hence whenever participate button is pressed it
will make your create response button enabled.
Regards
Bhanu Malik -
Query help needed for querybuilder to use with lcm cli
Hi,
I had set up several queries to run with the lcm cli in order to back up personal folders, inboxes, etc. to lcmbiar files to use as backups. I have seen a few posts that are similar, but I have a specific question/concern.
I just recently had to reference one of these back ups only to find it was incomplete. Does the query used by the lcm cli also only pull the first 1000 rows? Is there a way to change this limit somwhere?
Also, since when importing this lcmbiar file for something 'generic' like 'all personal folders', pulls in WAY too much stuff, is there a better way to limit this? I am open to suggestions, but it would almost be better if I could create individual lcmbiar output files on a per user basis. This way, when/if I need to restore someone's personal folder contents, for example, I could find them by username and import just that lcmbiar file, as opposed to all 3000 of our users. I am not quite sure how to accomplish this...
Currently, with my limited windows scripting knowledge, I have set up a bat script to run each morning, that creates a 'runtime' properties file from a template, such that the lcmbiar file gets named uniquely for that day and its content. Then I call the lcm_cli using the proper command. The query within the properties file is currently very straightforward - select * from CI_INFOOBJECTS WHERE SI_ANCESTOR = 18.
To do what I want to do...
1) I'd first need a current list of usernames in a text file, that could be read (?) in and parsed to single out each user (remember we are talking about 3000) - not sure the best way to get this.
2) Then instead of just updating the the lcmbiar file name with a unique name as I do currently, I would also update the query (which would be different altogether): SELECT * from CI_INFOOBJECTS where SI_OWNER = '<username>' AND SI_ANCESTOR = 18.
In theory, that would grab everything owned by that user in their personal folder - right? and write it to its own lcmbiar file to a location I specify.
I just think chunking something like this is more effective and BO has no built in back up capability that already does this. We are on BO 4.0 SP7 right now, move to 4.1 SP4 over the summer.
Any thoughts on this would be much appreciated.
thanks,
MissyJust wanted to pass along that SAP Support pointed me to KBA 1969259 which had some good example queries in it (they were helping me with a concern I had over the lcmbiar file output, not with query design). I was able to tweak one of the sample queries in this KBA to give me more of what I was after...
SELECT TOP 10000 static, relationships, SI_PARENT_FOLDER_CUID, SI_OWNER, SI_PATH FROM CI_INFOOBJECTS,CI_APPOBJECTS,CI_SYSTEMOBJECTS WHERE (DESCENDENTS ("si_name='Folder Hierarchy'","si_name='<username>'"))
This exports inboxes, personal folders, categories, and roles, which is more than I was after, but still necessary to back up.. so in a way, it is actually better because I have one lcmbiar file per user - contains all their 'personal' objects.
So between narrowing down my set of users to only those who actually have saved things to their personal folder and now having a query that actually returns what I expect it to return, along with the help below for a job to clean up these excessive amounts of promotion jobs I am now creating... I am all set!
Hopefully this can help someone else too!
Thanks,
missy -
Help Needed for T42 Start-up Problem
Urgent help need!!!
I have a ThinkPad T42 with Windows XP installed. It works perfectly for a while without ever have any problem or error message. Then suddenly it won’t work anymore. The symptom is following:
After power on the laptop the Microsoft window would show up and it prompt me for window logon password. After I type in the password it then shows “window is loading your personal setting”. After a long while nothing would show up on the screen other than the background of the normal screen. There is no window bar at the bottom or any icon on the screen. If I start in safe mode then everything would show up. I don’t know what is going on.
This happened two months ago and I ended up restoring a backup image to get it work again. It happens again today with the same symptom. I am really tired of having to restore image backup every 2 months.
I would really appreciate it if any of your experts can offer me some insight into this problem. I am desperate in need of help.
Thanks very much!wangy26, welcome to the forum,
Have a look at this thread to see if my post there helps. The problem seems to mostly occur at the start of a month, why I don't know. Unfortunately the member didin't report back whether or not this was a viable solution for them.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog -
Need for basic training on UCM.
Am new to Content management, and need of basic understanding on UCM.
- Creating and deploying the web site.
- Setting up various workflows and Templates.
Kindly let me know any Free lancer can help me here.Hi Sivakumar,
Welcome to the wonderful world of Oracle UCM. It really is one of the best ECM products around.
There are a number of organizations who provide training and Oracle is one of the best though they can be pricey.
There are some self-study books that are must-have's if you're getting into this realm:
1) The Definitive Guide to Stellent Content Server Development by Brian Huff is a bit dated but a solid development reference text.
http://www.amazon.com/Definitive-Stellent-Content-Development-ebook/dp/B001D0JOTE/ref=sr_1_2?ie=UTF8&s=digital-text&qid=1269298304&sr=8-2
2) Transforming Infoglut by Brian Huff and Andy MacMillan is a good strategy and architecture primer for you that is more up to date but not as much a developer reference.
http://www.amazon.com/Transforming-Infoglut-Pragmatic-Enterprise-Management/dp/0071602364/ref=sr_1_1?ie=UTF8&s=books&qid=1269298304&sr=8-1
Of course we're happy to help with any project or software work that you might have as well.
Best of luck
Warmly,
Billy Cripe
Fishbowl Solutions -
Download help needed for AIA 11g O2C PIP for Communications
I am installed the AIA FP 11g latest version, after that i want to download the Order to cash PIP for communications. I followed the following steps:
Navigated to Oracle Software Delivery Cloud. [https://edelivery.oracle.com/]
Select the Product Pack: Oracle Application Integration Architecture.
Selected the Linux.
Click Go.
Click the Oracle Application Integration Architecture Pre-built Integrations Release 11.1.1.4 Media Pack link
here, there are so many packs are available, can anyone please help me which pack i need to download for Order 2 cash PIP 11g for communications pip.>
I can't seem to get my application to work with the 10.2 client. I've heard that OO4O is not supported past 10.2 x86. First question is can someone clarify this - should I be able to use OO4O from Oracle version 10.2 on a Windows 7 x64 box? If so I need to know the specifics. My development machine is Windows XP and 10.2 works there but it's an x86 box.
>
First you should consider marking this question ANSWERED and reposting it in the Oracle forum for OO4O and Wizards.
OO4O and Wizards [ARCHIVE]
If you know anything at all about Oracle your knowledge should include the fact that if it isn't on the Official release notes it isn't supported.
The last release of OO4O (10.1.0.5.2) was March 2005 and these are the release notes
http://www.oracle.com/technetwork/database/windows/downloads/relnotes-435165.html
>
Oracle Objects for OLE (OO4O) Release Notes
Release 10.1.0.5.2
March 2005
System Requirements
Operating System: Windows NT 4.0 SP6a, Windows 2000 SP1, Windows XP, Windows 2003.
32-bit application capable of OLE scripting (e.g. Visual Basic, Excel, etc.) or supported C++ compiler (Microsoft Visual C++).
Access to an Oracle8i, Oracle9i or Oracle10g database through a local connection or a network using the Net client. Oracle Net will need to be installed when accessing the Oracle database through a network.
Oracle 10.1.0.2.0 client.
>
So there are two things working against you: no mention of Windows 7 (it didn't exist) and the client mentioned is 10.1.0.2.0 not 10.2.xxx
So even if you think it is working chances are it isn't working properly.
>
Second question - what are my workarounds? I assume there is another Oracle Object I can use for basic database communications. What is that object, and what types of changes am I going to have to make to my code in order to use it?
>
Who knows? Without knowing what functionality you are using and relying on there isn't any way to know what workarounds might be available or what changes you will need to make. -
Hi everyone ☺
I’m finally planning to start recording what I play, and after some hours of wandering on the web I found some interesting possibilities. Now what I need is to decide which one is more suitable for my needs, and here comes the moment for apple discussions
Basically, I will record my own music one track/instrument at a time (I’m still not able to play more than one…and I dont’ want to spend 2.000$ to buy a 24-ins device just to record drum tracks), I’d like to have a software with built-in effects for guitar/bass/voice, integrated soundtrack possibilities (to play with video recordings), mixing options for both stereo and surround mixing, and I don’t want any card to be placed into my mac. Well, and obviously the sound quality must be pro-like…as anyone probably wants.
So, here’s what I came up with:
a) getting logic pro studio 8 and apogee duet
b) getting pro tools m-powered and mbox 2
c) getting one of the two softwares and a Monster iStudioLink Instrument cable and plug instruments directly into the mac
Now, the questions are:
if I can plug an instrument directly into my mac and control all parameters via one of the two softwares, what do tools like duet and mbox2 serve for?
In the case this tools are useful [ ☺ ], why ☺ … and which is the couple software/hardware that can best suit my needs?
I assume that every software has a proprietary file extension in which audio tracks are saved, so that it should be impossible to record an audio track with one software and edit it with another that has different functions/plugins (ex. from logic to pro tools, from pro tools to cakewalk sonar which I have on a pc etc.). Am I right, or is there any “standard”, non compressed high quality file type in which track can be saved and exported to be edited with different softwares?
I know that from this post it may easily seem that I’m a hopeless digital idiot, but I swear the situation is not really that bad so no need for the kind of explanations with drawings like the ones you find in the “for dummies” guides lol so every experts’ advice will be greatly appreciated
NeptuneThank you Bee Jay and Pancenter for the lighting-fast and useful answers
now I am aware that an interface IS NEEDED lol (that means they are not produced without a reasons, are they?). I know Pro Tools is the industry standard but I don't like anyone/anything to tie me to their choices/interests (so that's why I was asking about Pro Tools, knowing that there's some sort of "hardware threat"). What I look for is just quality and if I understood what you both mean, as far as this aspect is concerned, Logic and Pro Tools are substantially comparable...isn't it? On the interfaces side, I already checked the Saffire ones (they seem quite good, and cross-platform use is definitely a plus), I will check the others mentioned and will let you know In fact, I didn't consider the "platform problem" but, as I wrote, I also own a PC with an Audigy 2 soundcard (midi/analog/optical/digital inputs/outputs and firewire port...not Madonna's private studio, but not as sad as Mac's little hole) and Sonar 6 Producer Edition, so that has been a really good point to ponder. And now, in the middle of this software/hardware battle...any personal suggestions based on tests/personal experience?
Maybe you are looking for
-
HT204407 It won't let me sign in. It just keeps saying I'm not connected to the Internet when I am.
Why is my find my friends app not working at all?! It just says that I'm not connected to the Internet but I am.
-
I tried to create a broschure with 16 sites. Open format of one site is 210x210 Closed format is 210x99. I tried a lot but I beleave Indesign accept only to organise the printarea from left to right. But I need a top-down site oranisation. I hope any
-
Outbound process red flag - how to restart?!
Hi, well i tried in a previous post to get help but i guess it was a little misunderstanding. I have a well processed message but it's not being send to target system, so i get a red flag on column outbound status in SXI_MONI. It's like a system is n
-
I can't get FCE to install. Even though my hardware exceeds the requirements, the Final Cut application is greyed out in the install window. Here's what I have: G4 that had dual processors, upgraded to PowerLogix PowerForce47 Dual G4/1.7 GHz processo
-
From Adobe home page -> Support -> Document -> Flash I found a "Flash Video Encoder User Guide" talk about this Flash Video Encoder. But throughout the Adobe web site, I can not find this product. Is it part of other product or it has another name? A