Help needed for hash_area_size setting for Datawarehouse environment
We have an Oracle 10g Datawarehousing environment , running on 3 - node RAC
with 16 GB RAM & 4 CPUs each and roughly we have 200 users and night jobs running on this D/W .
We find that query performance of all ETL Processes & joins are quite slow .
How much should we increase the value of hash_area_size parameter for this Datawarehouse environment ? This is a Production database, with Oracle Database 10g Enterprise Edition Release 10.1.0.5.0.
We use OWB 10g Tool for this D/W and we need to change the hash_area_size to increase the performance of the ETL Processes.
This is the Oracle init parameter settings used, as shown below : -
Kindly suggest ,
Thanks & best regards ,
===========================================================
ORBIT
__db_cache_size 1073741824
__java_pool_size 67108864
__large_pool_size 318767104
__shared_pool_size 1744830464
optimizercost_based_transformation OFF
active_instance_count
aq_tm_processes 1
archive_lag_target 0
asm_diskgroups
asm_diskstring
asm_power_limit 1
audit_file_dest /dboracle/orabase/product/10.1.0/rdbms/audit
audit_sys_operations FALSE
audit_trail NONE
background_core_dump partial
background_dump_dest /dborafiles/orbit/ORBIT01/admin/bdump
backup_tape_io_slaves TRUE
bitmap_merge_area_size 1048576
blank_trimming FALSE
buffer_pool_keep
buffer_pool_recycle
circuits
cluster_database TRUE
cluster_database_instances 3
cluster_interconnects
commit_point_strength 1
compatible 10.1.0
control_file_record_keep_time 90
control_files #NAME?
core_dump_dest /dborafiles/orbit/ORBIT01/admin/cdump
cpu_count 4
create_bitmap_area_size 8388608
create_stored_outlines
cursor_sharing EXACT
cursor_space_for_time FALSE
db_16k_cache_size 0
db_2k_cache_size 0
db_32k_cache_size 0
db_4k_cache_size 0
db_8k_cache_size 0
db_block_buffers 0
db_block_checking FALSE
db_block_checksum TRUE
db_block_size 8192
db_cache_advice ON
db_cache_size 1073741824
db_create_file_dest #NAME?
db_create_online_log_dest_1 #NAME?
db_create_online_log_dest_2 #NAME?
db_create_online_log_dest_3
db_create_online_log_dest_4
db_create_online_log_dest_5
db_domain
db_file_multiblock_read_count 64
db_file_name_convert
db_files 999
db_flashback_retention_target 1440
db_keep_cache_size 0
db_name ORBIT
db_recovery_file_dest #NAME?
db_recovery_file_dest_size 2.62144E+11
db_recycle_cache_size 0
db_unique_name ORBIT
db_writer_processes 1
dbwr_io_slaves 0
ddl_wait_for_locks FALSE
dg_broker_config_file1 /dboracle/orabase/product/10.1.0/dbs/dr1ORBIT.dat
dg_broker_config_file2 /dboracle/orabase/product/10.1.0/dbs/dr2ORBIT.dat
dg_broker_start FALSE
disk_asynch_io TRUE
dispatchers
distributed_lock_timeout 60
dml_locks 9700
drs_start FALSE
enqueue_resources 10719
event
fal_client
fal_server
fast_start_io_target 0
fast_start_mttr_target 0
fast_start_parallel_rollback LOW
file_mapping FALSE
fileio_network_adapters
filesystemio_options asynch
fixed_date
gc_files_to_locks
gcs_server_processes 2
global_context_pool_size
global_names FALSE
hash_area_size 131072
hi_shared_memory_address 0
hpux_sched_noage 0
hs_autoregister TRUE
ifile
instance_groups
instance_name ORBIT01
instance_number 1
instance_type RDBMS
java_max_sessionspace_size 0
java_pool_size 67108864
java_soft_sessionspace_limit 0
job_queue_processes 10
large_pool_size 318767104
ldap_directory_access NONE
license_max_sessions 0
license_max_users 0
license_sessions_warning 0
local_listener
lock_name_space
lock_sga FALSE
log_archive_config
log_archive_dest
log_archive_dest_1 LOCATION=+ORBT_A06635_DATA1_ASM/ORBIT/ARCHIVELOG/
log_archive_dest_10
log_archive_dest_2
log_archive_dest_3
log_archive_dest_4
log_archive_dest_5
log_archive_dest_6
log_archive_dest_7
log_archive_dest_8
log_archive_dest_9
log_archive_dest_state_1 enable
log_archive_dest_state_10 enable
log_archive_dest_state_2 enable
log_archive_dest_state_3 enable
log_archive_dest_state_4 enable
log_archive_dest_state_5 enable
log_archive_dest_state_6 enable
log_archive_dest_state_7 enable
log_archive_dest_state_8 enable
log_archive_dest_state_9 enable
log_archive_duplex_dest
log_archive_format %t_%s_%r.arc
log_archive_local_first TRUE
log_archive_max_processes 2
log_archive_min_succeed_dest 1
log_archive_start FALSE
log_archive_trace 0
log_buffer 1167360
log_checkpoint_interval 0
log_checkpoint_timeout 1800
log_checkpoints_to_alert FALSE
log_file_name_convert
logmnr_max_persistent_sessions 1
max_commit_propagation_delay 700
max_dispatchers
max_dump_file_size UNLIMITED
max_enabled_roles 150
max_shared_servers
nls_calendar
nls_comp
nls_currency #
nls_date_format DD-MON-RRRR
nls_date_language ENGLISH
nls_dual_currency ?
nls_iso_currency UNITED KINGDOM
nls_language ENGLISH
nls_length_semantics BYTE
nls_nchar_conv_excp FALSE
nls_numeric_characters
nls_sort
nls_territory UNITED KINGDOM
nls_time_format HH24.MI.SSXFF
nls_time_tz_format HH24.MI.SSXFF TZR
nls_timestamp_format DD-MON-RR HH24.MI.SSXFF
nls_timestamp_tz_format DD-MON-RR HH24.MI.SSXFF TZR
O7_DICTIONARY_ACCESSIBILITY FALSE
object_cache_max_size_percent 10
object_cache_optimal_size 102400
olap_page_pool_size 0
open_cursors 1024
open_links 4
open_links_per_instance 4
optimizer_dynamic_sampling 2
optimizer_features_enable 10.1.0.5
optimizer_index_caching 0
optimizer_index_cost_adj 100
optimizer_mode ALL_ROWS
os_authent_prefix ops$
os_roles FALSE
parallel_adaptive_multi_user TRUE
parallel_automatic_tuning TRUE
parallel_execution_message_size 4096
parallel_instance_group
parallel_max_servers 80
parallel_min_percent 0
parallel_min_servers 0
parallel_server TRUE
parallel_server_instances 3
parallel_threads_per_cpu 2
pga_aggregate_target 8589934592
plsql_code_type INTERPRETED
plsql_compiler_flags INTERPRETED
plsql_debug FALSE
plsql_native_library_dir
plsql_native_library_subdir_count 0
plsql_optimize_level 2
plsql_v2_compatibility FALSE
plsql_warnings DISABLE:ALL
pre_page_sga FALSE
processes 600
query_rewrite_enabled TRUE
query_rewrite_integrity enforced
rdbms_server_dn
read_only_open_delayed FALSE
recovery_parallelism 0
remote_archive_enable TRUE
remote_dependencies_mode TIMESTAMP
remote_listener
remote_login_passwordfile EXCLUSIVE
remote_os_authent FALSE
remote_os_roles FALSE
replication_dependency_tracking TRUE
resource_limit FALSE
resource_manager_plan
resumable_timeout 0
rollback_segments
serial_reuse disable
service_names ORBIT
session_cached_cursors 0
session_max_open_files 10
sessions 2205
sga_max_size 3221225472
sga_target 3221225472
shadow_core_dump partial
shared_memory_address 0
shared_pool_reserved_size 102760448
shared_pool_size 318767104
shared_server_sessions
shared_servers 0
skip_unusable_indexes TRUE
smtp_out_server
sort_area_retained_size 0
sort_area_size 65536
sp_name ORBIT
spfile #NAME?
sql_trace FALSE
sql_version NATIVE
sql92_security FALSE
sqltune_category DEFAULT
standby_archive_dest ?/dbs/arch
standby_file_management MANUAL
star_transformation_enabled TRUE
statistics_level TYPICAL
streams_pool_size 0
tape_asynch_io TRUE
thread 1
timed_os_statistics 0
timed_statistics TRUE
trace_enabled TRUE
tracefile_identifier
transactions 2425
transactions_per_rollback_segment 5
undo_management AUTO
undo_retention 7200
undo_tablespace UNDOTBS1
use_indirect_data_buffers FALSE
user_dump_dest /dborafiles/orbit/ORBIT01/admin/udump
utl_file_dir /orbit_serial/oracle/utl_out
workarea_size_policy AUTO
The parameters are already unset in the environment, but do show up in v$parameter, much like shared_pool_size is visible in v$parameter despite only sga_target being set.
SQL> show parameter sort
NAME TYPE VALUE
sortelimination_cost_ratio integer 5
nls_sort string binary
sort_area_retained_size integer 0
sort_area_size integer 65536
SQL> show parameter hash
NAME TYPE VALUE
hash_area_size integer 131072
SQL> exit
Only set hash_area_size and sort_area_size should only be set when not using automatic undo, which is not supported in EBS databases.
Database Initialization Parameters for Oracle Applications 11i
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=216205.1
Similar Messages
-
Needs steps for Printer setting for User-customized Paper Size
Hii
I need steps for Printer setting for User-customized Paper Size
for my requirement i hav to design this for a paper which is 9cm length and width 23cm and printer is Laser printer
Thanks
RaviHi ,
Kindly send me materials regarding printer configuration , I need to confiure a printer .Kindly help me.
My ID is rakeshhaari at gmail dot com
Regards,
Hari -
Help need my mac pro for school..it has Grey screen..spinning wheel...
I think I have mountain lion OS X....I have done I think almost every suggestion I've seen in discussion boards.
Boot in recovery repaired disk...ok...repair disk permission...all repaired but one warning...I've tried to reinstall lion (without losing data) and it Got all the way to one minute to be done and then the time change back two hours and kept doing this all night long. I haven't done a back up due to no external for time machine.
I hope someone can please help me I've been going crazy for a week now trying to figure this out. I use my computer for school and I'm currently very behind from in my school work thank you
Also I've checked my available space 424.91 free of 750 gigs....disk is verifiedWelcome to the Apple Support Communities
Try holding the Shift key while your Mac is starting to start into safe mode. Then, after starting in safe mode, open Finder, select Go menu (on the menu bar) > Go to Folder, and type /Library/StartupItems. Then, empty this folder and restart the Mac.
If your Mac starts after doing this, it was a problem with a third-party app that starts automatically when you turn on the computer. It won't start automatically anymore after doing that -
Help Needed Configuring Post Set Up For Big Indie Feature:
We’ve got incredible performances from an amazing cast of well-known character actors from film, TV and stage, a unique and inspiring script, and some truly beautiful, cinematic footage. And now — it’s all about putting it together…
But I’m having trouble finding an accurate, effective and (most importantly) a DETAILED workflow accommodating the latest version of Premiere, to post a LENGHTY feature film shot on the RED Epic in 5k FF. I’ve reviewed videos here, but in conducting edit tests, I'm encountering all manner of glitches and problems, and need to ensure that I am properly configuring our post workflow and all of the associated hardware.
I’ll be dividing the film into project file “reels” to help keep things manageable. As editor and DP, it's also most important for me to edit on a 4k timeline (to take advantage of reframing and stabilization of the 5k). Footage is on three Pegasus II RAIDS.
There will be a LOT of FX work done outside of Premiere in AE (and other compositing and graphics programs). I’m planning to finish in Resolve, outputting at 4k.
I have the new Mac Pro with:
- 2.7GHz 12-core Intel Xeon E5 with 30MB of L3 cache
- 64GB (4x16GB) of 1866MHz DDR3 ECC - 4X16GB
- 1TB PCIe-based flash storage
- Dual AMD FirePro D700 GPUs with 6GB of GDDR5 VRAM each
A Sonnet Echo Express III Desktop 3-Slot (with Thunderbolt upgrade) housing the following:
- Red Rocket
- Connection card for HP LTO5 Ultrium 3000 Sas Ext Tape Drive
If needed, I’m open to acquiring other cards or hardware, too (possibly adding the Red Rocket-X to the mix). And if the referral of a PAID individual with firsthand knowledge of such a setup – to at least help with the initial set up and configuration – is what I need, I’m open to that, as well.
We truly have an amazingly powerful compilation of principal photography, and a great story to tell — I just need to overcome this major hurdle of setting up our post. As a somewhat newbie to Premiere, I greatly appreciate any advice, pointing-me-in-the-right-direction, or suggestions of individuals to help oversee this for compensation and screen credit that anyone can offer me here...
Many Thanks,
BillOooh...big involved questions and many of them.
If it helps..
A few things I know I would do before even starting on the actual film edit
..is give the new system a massive shakedown.
Thrash the hardware and software with test footage , graphics and audio etc.
Test the pipelines and workflows.
Set up a BACKUP routine. DO NOT RELY ON AUTOSAVES
Would NOT do O.S updates once started with a stable system.
Me...I would not use a Dynamic Link workflow for FX. (I would use D.Is)
Would create a flow chart plan for the edit and post prod to avoid generation losses, efficiencies and scheduling.
Work toward lock downs before FX , audio, CC and Grade. (Avoid the trap of being creatively impatient for the benefit of a smooth edit experience)
Sort this first...
I'm encountering all manner of glitches and problems, and need to ensure that I am properly configuring our post workflow and all of the associated hardware.
You might want to specify some of this stuff and see if you get answers here or elsewhere..
Suggestion - can you wait for next version of PPro ? - coming very soon evidently. Start with latest version so you don't need to update midstream. A feature takes a long time to post and some cool new features may help. eg Master Clip enhanced.
Have you considered Prelude in the workflow to log and set up your project. ( Never used it myself but I would consider/investigate it for long form)
Good luck and enjoy the edit process. -
Desperate help needed to configure WVC210 for remote access?
Hi, I'm new and desperately need some help on setting up my WVC210 for remote access.
I manage to setup and see images from my WVC210 using my home LAN via both wired and also wireless.
I have 2 questions:
(a) for wireless connection, i only manage to get connection to my WVC210 if i disable the wireless security from my router. But that means i'm opening my wireless LAN to everyone. How can i still get connection to the camera if i enable the wireless security from my router. (FYI: my router is 2Wire ADSL from Singnet Mio)
(b) how can i get connection to my WVC210 from outside or in my office? I type in the camera Fixed IP address (displayed on the front screen) on the web browser, by it shows a error page. Is there some setting that i might need to adjust ?
Pls kindly help me
Thank you.Bernard,
For Item (2) is there any difference between the camera built-in dyndns updater versus the software updater? I am under the impression that the software updater is easier to manage.
The biggest difference for you is that the camera always stays at the same location, and the laptop goes with you. Every time you access the internet from a different location with the laptop the software updater is sending the new IP address to dyndns.com. This causes you to lose access to your camera because the FQDN doesn't point to your home IP address anymore. Once the dyndns credentials are in the camera (or router) there is no management needed. The device will automatically update dyndns.com with your new IP address as it changes, and you do not need to do anything.
For Item (3), are you saying port forward 1025 is it for the 2nd camera only or for both? Or is it 2nd camera use 1025 and first camera use 8080?
Here's an example of what I mean:
Camera 1: 192.168.1.210 port 1024. In router, forward port 1024 to 192.168.1.210
Local Access: http://192.168.1.210:1024
Remote Access: http://bernards210.dyndns.org:1024 (Example)
Camera 2: 192.168.1.211 port 1025. In router, forward port 1025 to 192.168.1.211
Local Access: http://192.168.1.211:1025
Remote Access: http://bernards210.dyndns.org:1025 (Example)
Camera 3: 192.168.1.212 port 1026. In router, forward port 1026 to 192.168.1.212
Local Access: http://192.168.1.212:1026
Remote Access: http://bernards210.dyndns.org:1026 (Example)
to access the 2 camera outside, do i have to have another dyndns host name or can i use the current one for both camera?
As you can see in the above example, the dyndns name remains the same for remote access to all three cameras. The only change is the port number at the end. Your router will translate the port number to the IP address that the port is forwarded to, allowing you to select the camera that you wish to view by changing the port number in the address.
I was actually thinking that the camera web browser can show 2 camera at the same time. Is it possible?
No. Each browser window will display a single camera. You can however opens multiple instances of your browser to allow viewing of more than one camera simultaneously. A better solution is to install the Video Monitoring Software that is included with the camera which allows you to view multiple cameras in the same window. -
Help needed with printer settings for wired ethernet connection
I'm hoping someone can help me with a network printing issue. I have a large format color laser printer (Tektronix Phaser) and since moving to OS 10.6 I can't figure out how to configure the printer so that the system sees it. I have a simple wired ethernet network with a couple of Macs and a couple of printers. All devices are connected via a switch. When using earlier OSs I was able to connect to the Phaser using Ethertalk. Obviously this is no longer supported and I can't figure out how to set the printer so the OS can see it. I have lots of options which can be turned on or off and in some cases set up in other ways: Ethertalk, IPX, Netware, TCP/IP, DNS, LPR, HTTP and remote internet printing, I've tried messing with these but the result is always the same--system doesn't see the printer. Currently Ethertalk is on, IPX and Netware are off, TCP/IP is on, DNS and LPR are on, as are AppSocket, HTTP, FTP and remote internet printing. I can change the IP address but no matter what address I've tried I cannot ping the printer. (I'm using a Gutenprint driver for this printer.)
I don't really know enough about all this to get anywhere and I haven't been able to find help anywhere even from tech friends. Xerox won't help me and neither will Apple. Any help would be appreciated. I can supply more detail on specifics where necessary. Thanks, BobOld Phaser models may becoming more and more difficult to use, but you can give this a try.
1. Configure the printer via front panel to use TCP/IP and enable DHCP if it's supported. If not then you will need to configure an IP address for the printer together with your local network's mask, and gateway IP address. Except for the first the others will be provided by opening Network preferences to see what those settings are. The printer's IP address needs to be set somewhere within the range of IP addresses your router provides locally.
2. You need the PPD file required for your printer. If you have the Phaser driver installer you can use it to install the PPD or you can extract the specific PPD from the installer package. This part is tricky because I don't know where you may find the driver now if you don't have the installer. The older installers can be accessed through the Finder by selecting the package then CTRL- or RIGHT-click and select Show Package Contents from the contextual menu. You can then rummage through the package to search for the PPD for your printer. Then navigate to the /Library/Printers/PPD/Contents/Resources/ folder and drop the PPD file inside.
3. Open Print & Fax preferences and click on Add [+] to add a new printer. Click on the IP icon in the toolbar. Select Line Printer Daemon - LPD from the Protocol drop down menu. Input the IP address you assigned the printer in the Address field. You can file in the optional fields that follow. Then from the Print Using drop down menu locate the listing for your printer and select it. -
Help Needed: Enable local currency for Customer Invoicing
We are needing to enable local currency for customer invoicing on a project coming very soon. Does anyone have any information on the best way to get this done and/or documentation to look over? Any help would be greatly appreciated!!
Thank You in Advance!
Jay Esparza
SAP Functional ConsultantHi
Local currency automatically gets activated as you set your company code currency.
No need to enable separately for customer invoicing
Plz assign points if it is helpful.
Regards
Tapan -
Please help download complete content set for garageband
I just bought a new iMac (the one without a cd drive!) and I'm trying to download the complete content set for garageband but nothing is working. I can't do anything in the app store and there are no updates to be found. please help!
Flying Toad wrote:
After downloading the '09 version from Apple for free I ran into an error when attempting to install it on my computer. It says "This update does not need to be installed. A newer version of Garageband is already installed."
the problem is that you didn't D/L GBv5 ('09), you D/Led the update for version 5 to v5.1, not the entire v5 installation.
you'd need to either restore GBv5 from a backup, or buy a copy of GBv5 (or v6) from someplace like eBay or Amazon (it's not available for free from Apple) -
When does LIBPATH need to be set for an Oracle RDBMS running on AIX?
I am trying to determine the impacts of not having LIBPATH set in an AIX 5.3 environment running Oracle 10.2.0.4 64 bit databases. It would appear these databases may have been ported from Linux and the LD_LIBRARY_PATH variable was set in some of the scripts (i.e. Cold backup that shutsdown and starts the database).
My interpretation from research is LD_LIBRARY_PATH would be ignored by AIX, although some hits I have found show this envionment variable set and LIBPATH. If LIBPATH is not set for database scripts (i.e. shutdown/startup for backup, database maintenance, etc) is there any concern? LIPBPATH is not set in the .profile for the oracle account either.908340 wrote:
I am trying to determine the impacts of not having LIBPATH set in an AIX 5.3 environment running Oracle 10.2.0.4 64 bit databases. It would appear these databases may have been ported from Linux and the LD_LIBRARY_PATH variable was set in some of the scripts (i.e. Cold backup that shutsdown and starts the database).
My interpretation from research is LD_LIBRARY_PATH would be ignored by AIX, although some hits I have found show this envionment variable set and LIBPATH. If LIBPATH is not set for database scripts (i.e. shutdown/startup for backup, database maintenance, etc) is there any concern? I am not concerned. -
Help needed to spec kit for a DC
Hi Guys,
I'm hoping you can help me out. I'm trying to satisfy some DC requirements for a client for a new build they are planning. They have given me the following requirements:
Top Of Rack
1) Fixed configuration 1 Rack Unit (RU) Form factor
2) 48 IEEE 802.3x full duplex on 100BASE-TX, and 1000BASE-T ports
3) 32 1Gbps or 10Gbps/FCoE ports
4) Backplane capacity of a minimum of 40Gbps and a maximum of 80Gbps
5) Internal Redundant Power Supplies
6) Virtualisation of the data plane at layer 2
7) Vlans
8) IEEE 802.1Q VLAN encapsulation
9) IEEE 802.1s MSTP
10) IEEE 802.1w RSTP
11) IEEE 802.3ad Link Aggregation
End Of Rack
1) Fixed configuration Form factor
2) Support for 1Gbps and 10Gbps Ethernet access
3) Support for Fibre Channel and Fibre Channel over Ethernet access
4) High Availability support for top of rack switching
5) Internal Redundant Power Supplies
6) Virtualisation of the data plane at layer 2
7) Vlans
8) IEEE 802.1Q VLAN encapsulation
9) IEEE 802.1s MSTP
10) IEEE 802.1w RSTP
11) IEEE 802.3ad Link Aggregation
12) NTP
13) AAA
14) SYSLOG
15) TFTP/FTP
16) SNMPv2 and SNMPv3
17) SSH
18) IEEE 802.1s MSTP
19) IEEE 802.1w RSTP
20) IEEE 802.1p Classification
21) Congestion Management Features
22) Congestion Avoidance Features
23) Traffic Shaping Features
24) Traffic Policing Features
Is there a 1RU switch that fits the requirements for all the above ?. I was planning on going dwn the 4948 series route but I was not aware of one that gave 10gb ethernet access. Unless I go down the 4507R+E and use the new 12 port 10GB cards, but the requirements are asking for 32 1 or 10gb ethernet access. Also, I've never configured a switch for FCOE, as it was always only our SAN guys that did that. I know Nexxus will support 10gb, but they are not considered top of rack are they ?
Any help you can give is greatly appreciated guys.
MooeyHi Mooey,
If you are going to need FCoE, then Nexus 5000/5500 will be likely what you'd want to go with. When combining it with the various Nexus 2000 FEX modules I think this should satisfy most of the requirements. The 2224T and 2248T will allow 48 100/1000 ports. The 2232P provides 32 1/10gb ports using SFP/SFP+.
Take a look at the data sheet here to look at all the SKUs to see which would fit:
http://www.cisco.com/en/US/prod/collateral/switches/ps9441/ps10110/data_sheet_c78-507093.html
However you won't find 1 RU sku here that will provide 100/1000gb and 10gig connectivity to hosts. You'll have to choose here and design the rack with that in mind.
Also, we do have a 4948 that does have 10gig uplinks, WS-C4948-10GE. However it doesn't do FCoE:
http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps6021/ps6230/product_data_sheet0900aecd80246552.html
Take a look over it, hope it helps out
Chad -
Help Needed-Connection Url String for Oracle8i
DriverManager.getConnection(Url , username ,password);
In the above , I need the connection url for Oracle8i Database.
Thanks..This works for me:
jdbc:oracle:thin:@HOST:1521:INSTANCE
Where HOST and INSTANCE represent the machine running oracle and DB instance. 1521 is the default port but may be changed.
Mike -
Help needed in Joining tables for Help view
Hi All ,
My requirement is create a search help , using a view which will join four table ,
I was able to do using a databaser view and joining below tables
KNA1 MANDT = KNVV MANDT
KNA1 KUNNR = KNVV KUNNR
TVV5 MANDT = KNVV MANDT
TVV5 KVGR5 = KNVV KVGR5
TVV5 MANDT = TVV5T MANDT
TVV5 KVGR5 = TVV5T KVGR5
But thes is doing a inner join and help is not providing valuse where tghere are no entries for KNVV-KVGR5
for outer join i came to know we use hep view s instead of database viow ,
But i have problem joining these table s while creating Help View .
Any Help will be appricaited
Thanks
Vinay KollaHi Vinay,
Use the tabls in below given order to get the right view.
KNVV
KNA1
TVV5
TVV5T
KNA1-MANDT = KNVV-MANDT
KNA1-KUNNR = KNVV-KUNNR
TVV5-MANDT = KNVV-MANDT
TVV5-KVGR5 = KNVV-KNVV
TVV5-MANDT = TVV5T-MANDT
TVV5-KVGR5 = TVV5T-KVGR5
Regard
Anees -
997 getting Reject code for entire set for incoming 810
Hi everyone,
I have an inbound scenario from EDI 810 to invoice IDoc, in which I need to set up the 997 Acknowledgment. This is my receiver EDI Separator channel setting for 997.
I m getting a Reject code(R) in AK5 and AK9 segments of 997 document. Can you please help me with understanding more on why I m only getting R and not A(Accept) code on these.
This is the payload I m using in testing.810:
ISA*00* *00* *01*040986076 *ZZ*ADVPCS *140204*094
9*U*00401*000000001*0*P*>~GS*IN*040986076*ADVPCS*20140204*0949*1*X*004010~ST*810
*0001~BIG*20140203*2100442761*20140129*894054~N1*BT*xxxx~N3*yyyy~N4*SCOTTSDALE*AZ*85260*US~N1*ST*xyz*92*BC9420491~N3*25 BIRCH ST BLDG B - STE 100~N4*MILFORD*MA*01757~
N1*IT*xyz123*21*RI0105595~N3*ONE ASTELLAS WAY~N4*Northbrook*IL*6
00626111~REF*IT*RI0105595~ITD*01*3*0*20140315*45*20140315*45~IT1**3*BT*7889.55**
VC*12599~PID*F****XTANDI 40MG CAPSULES 120/BOTTLE 1360832PC~TDS*2366865~CTT*1~SE
*18*0001~GE*1*1~IEA*1*000000001~
This is the 997 I m getting:
997:
ISA*00* *00* *ZZ*ADVPCS *01*040986076 *140505*1611*U*00401*000000001*0*P*>~GS*FA*ADVPCS*040986076*20140505*1611*1*X*004010~ST*997*0001~AK1*IN*1~AK2*810*0001~AK5*R~AK9*R*1*1*0~SE*6*0001~GE*1*1~IEA*1*000000001~
Thanks a lot in advance!!
Regards,
Anjana.Hi Anjana,
I executed your input payload and it got successfully processed. I am attaching the 997 which I got in the below.
ISA*00* *00* *ZZ*ADVPCS *01*040986076 *140506*0311*U*00401*000000001*0*P*>~GS*FA*ADVPCS*040986076*20140506*0311*1*X*004010~ST*997*0001~AK1*IN*1~AK2*810*0001~AK5*A~AK9*A*1*1*1~SE*6*0001~GE*1*1~IEA*1*000000001~
There are of points. First in the screenshot which you have shown says Negative Acknowledgment not required. So you should not get the rejected values in 997 segment.
Secondly, could you check if the correct channels are picking up the file for processing.
Could you also let me know the SP and patch level you are currently using.
Best Regards,
Ruchir -
Problems for Infopackage setting for Hierarchy Load
Hello Masters,
I have a problem, in editing the setting for Hierarchy Infopackage, I was asked to reset the Processing mode of infopackage directly into Infoobject, instead of PSA and then into Subsequent Data targets.
But here, i am unable to edit the setting because, every thing is gryed out. Only option selected before is "Only PSA, and then Update in subsequent Data Targets"
I have a question, like is it mandatory setting for Hierarchy Infopackage, to Update in PSA and then into Data Targets.
As i was able to edit settings for Attribute, and Text Infopackages even though these are in Process chains.
Could any one please help, if it is possible to edit Hierarchy Infopackage, instead of creating a new one.
Thank you
Regards
RaghuHi,
I have checked, the transfer rules, The Transfer Method used is PSA. I have to reset this infopackage directly to Infoobject, because this process chain runs for every four hrs, and it increases PSA size in tons.
Hence, i was asked to reset the setting for infopackage. But it is gryed out.
Thank you,
Regards
Raghu
Edited by: raghuram alamuri on Jul 16, 2009 3:29 PM -
Help needed,
I am getting this message sandbox environment error no test user account, when downloading any application from iTunes, friend told me to sign out and sign in iTunes it might solve the problem , and i triyed it but still I cannot login I to my itune account. Same message keeping. Popping up, this problem started supricly today.Take a look at the instructions here.
http://www.technogal.net/2012/03/this-is-not-test-user-account-please.html
Maybe you are looking for
-
hello gurus, i am trying to post in special g/l accounts f-38: i cannot post error: account determination not defined for trans.SGA in charts of account (1111). I have maintained this but i guess i did it incorrectly, ow do I go about this pls? also
-
Logic for making ASN as an attachment to a email?
hi all, can anyone help me trying to write a logic for making the Advanced Shipment Notification as an email attachment after having converted it into pdf format? I need logic for: 1) Initially converting it into pdf 2) Making the pdf as an attachmen
-
Capture the Node clicked / selected in Toplevel navigation
HI How to capture the node that is clicked by user in the generated toplevel navigation from the taglib. I need to pass the TAB/MENU name selected by user to another JSP using session or request object. <nav:iterateInitialNavNodes> <li class=
-
Free sample from vendor (import) need to pay freight and duties
All SAP Gurus, Vendor outside India has send us free sample. But we need to pay duties and freight over it. How this can be mapped in SAP? Regards,
-
I haven't been able to phrase this for google, so I'm humbly asking for human assistance --maybe yours. I'd like to be able to shutdown/halt/poweroff my system by issuing a command while I still have applications running in an X server. If I call 'po