E71 Not staying connected to email for sync/new em...

Hi all. Im new to the E71. One thing i have noticed is that i need to hit the home button to keep myself connected to my email. Ok i can remember that. But sometimes it just disconnects and im not sure why. Completely random as i can see. But i need it to stay connected or to reconnect on its own when i lose service for a min or something. Any ideas for me? Thanks in advance

Firefox Sync stores your Sync credentials in Password Manager, so they're available across restarts.
If you have Firefox set to clear your passwords on exit, then your Sync account credentials have been lost, and you'll have to set up Sync every time you start Firefox. (I hope you saved your Sync Key somewhere!)
In order to have Sync persist across restarts, you need to disable clearing of passwords. I'm also uncertain what the behavior of Sync will be if you clear your history; it should work fine, but I've never tested it myself.

Similar Messages

TS1369 I just bought a new laptop and my ipod nano will not stay connected to my computer. When I first connect the ipod it starts to sync on my ipod but not in itunes. At this point my ipod is connected to my computer but when it finishes syncing it's no

I just bought a new laptop and my ipod nano will not stay connected to my computer. When I first connect the ipod it starts to sync on my ipod but not on itunes. The ipod is initially connected to my computer, I can see it when I look on devices in my computer. However, when it finishes syncing it is no longer detected to my computer. I cannot transfer any of my songs to my new laptop because of this. I have tried to reinstall itunes, reset my ipod and use a different port. None of these things worked. Any ideas?

rubicon53 wrote:
I just bought a new laptop and my ipod nano will not stay connected to my computer.
I cannot transfer any of my songs to my new laptop
How to use your iPod to move your music to a new computer

Ipod will not stay connected for more then a few seconds

I was going to update my nano this morning after downloading the newest version of software, and first off it said the firmware was corrupt. so then I restored it, and it would not restore to the new version so i used the older version. the ipod seems to work in my hand but when i connect it to my computer it will not stay connected for more then a few seconds, then it ejects its self, but itunes still shows it as being there even though the rest of the computer does not
I have not had any issues with it since i bought it which was last june.
any ideas?
John

Hi John,
I would suggest, with your iPod disconnected, that you force your iPod into disk mode (following the instructions in this article)
Connect your iPod to your computer.
Then, try restoring it in iTunes while it is connected in disk mode.
Can you successfully restore your iPod?
If so, when the restoring and resyncing process is all complete, now update your iPod to the latest firmware.
Any success with trying that?
-Kylene

After iPhone connects to iTunes, can not find the photos tab for sync

After iPhone connects to iTunes, can not find the photos tab for sync. Thus, I can not copy some phototes from my Macbook to iPhone, But my iTouch can do this. I don't know why.

If you are using a mac, you use iphoto.
If you are on windows, you use whatever camera software windows uses.
Itunes does not import photos.

When I connect my ipod to 2 different Mac computers, it will charge but is not showing up in itunes for sync. What happened?

When I connect my ipod to 2 different Mac computers, it will charge but is not showing up in itunes for sync. What happened?

What have you tried so far in terms of troubleshooting this issue? Are you plugging the iPod into a high powered USB 2.0 port on the back of your Mac? Have you tried a different USB cable?
What happens if you try to reset the device with it still connected to the Mac?
How to reset iPod
Has this iPod ever worked on this Mac or is this the first time you have time you have tried connecting it?
Have you carefully worked through each and every single suggestion in this Apple support document?
iPod not recognized in iTunes and Mac desktop
B-rock

I have had my iphone 4 for less than 3 months and i always have it in a protective case, recently my bluetooth that i use daily will not stay connected, my alarm clock will not ring, any suggestions on whats going on??

i have had my iphone 4s for less than 3 months and i always have it in a protective case, recently my bluetooth that i use daily will not stay connected, my alarm clock will not ring, any suggestions on whats going on??

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

Is anyone having a problem with the new iPad (Gen. 3) not staying connected to the charger? It seems to ALWAYS get jiggled loose and no longer be charging. My iPad 1 has no issue but I can't browse Internet w/o new iPad unplugging. Horrible!

I notice that my new IPad (3rd generation) will not stay connected to the power cord at all, I'm not exagerating, if I plug it in and browse the Internet without fail it will become unplugged and I will have to push the plug back in (Ba-beep). Ive actually grown to despise that sound when you plug your iPhone or iPad in because it reminds me of how much money I spent on something that PHYSICALLY will not charge while I'm using it.
I know the problem with it holding a charge while in use, I get it, the screen is amazing and it takes a lot to run the display, however, it is unacceptable to me that I can't even keep the thing plugged in while I'm using it. I can not even leave it on my Cal King bed overnight because I will wake up in the morning to find that the plug has been jiggled loose in a corner, so it's still attached but not making a connection thus not being charged.
I love the 4GLTE from Verizon and I love the iPad, but I'm actually using my 1st generation IPad while I am at home so I can leave my new $900 iPad on a table to charge free of incident so I can use the 4G while I'm away from wifi during the day. I have been getting more upset about this because I can not even use the Griffin extended cord to charge the iPad and be far from the plug because only the original apple sync/charge cord will have a better shot at staying in. Absolutely none of my non apple cables will stay in the iPad 3 while having it in my hands.
The plug is at an angle, unlike the first iPad, not sure about the iPad 2. Please let me know if they have same issue.
If anyone else is having this problem with the Gen 3 iPad please let me know because I'm tempted to do something about it with apple and I'm hoping that I just for some reason have a bad cable receiver or something and maybe I can get a replacement and enjoy the iPad as I had expected to. There is no reason why I should be even using my first iPad and I have friends that want to buy it but I am not selling it because I'm unable to sell it because I can't handle the new iPad while it's plugged in, that is ridiculous if it's a common issue so please let me know!

Thanks for the swift reply, I have been looking online and a loose plug seems to be somewhat of an issue with many, I hope mine is actually a problem and not what others are experiencing. It's taken me this long to even reach out for the simple fact I HATE being a complainer but this is just horrible.
Do you have an iPad 3 as well? And is yours not experiencing any issues close to mine?
Thanks again!

IPhone 4 does not stay connected to internet over 3G+

I have an iPhone 4 on the telus network running the latest version of the os 4.3.3. My phone will not stay connected to the Internet most of the time. It looses connection and won't reconnect until I turn on airplane mode and then turn it back off. It also looses connection if I have wifi on and it detects a network but choose not to connect to it. I have restored my phone and it fixed the problem for half a day before it started again. I only have a couple months warranty left, is this covered do you think?

I don't have another phone to try. I took out the sim to check for deffects but it looked fine. Cleaned the sim card with alcohol and cleaned the aim compartment. Phone didn't loose Internet connection all day yesterday, but this morning went to check emails and wouldn't update until I turned airplane mode on then off again.

Iphone 4 does not stay connected to my network

Since upgrading to 6.1, my iPhone 4 does not stay connected to my network. I have to input my password each time I leave my house. My other devices stay connected, so the issue is with the upgrade. Has anyone found a way to keep their IPhone connected to their network? Thanks.

I don't have another phone to try. I took out the sim to check for deffects but it looked fine. Cleaned the sim card with alcohol and cleaned the aim compartment. Phone didn't loose Internet connection all day yesterday, but this morning went to check emails and wouldn't update until I turned airplane mode on then off again.

HP Officejet 6500A Plus not staying connected to wireless network

Just picked up a HP Officejet 6500A Plus e-All-in-One Printer - E710n the other week and set it all up and it was working wonderfully. But I noticed after it goes into sleep mode it disconnects from the wireless network and doesn't reconnect.
I will get a overview of how I have it all set up.
I have a DSL modem with a TRENDnet TEW-639GR router connected to it. I have set my router to reserve IP addresses for the computer and printer. That way I can leave the computer and printer wireless IP settings as automatic and they will always get the same IP address. I do this for the wireless network at my parents place as well and it works perfectly with their HP Photosmart C7280.
I also set up the HP ePrintCenter feature on the printer so that I can print by sending the printer an email. When I first set it all up this was working great. I tested it all and it was awesome. When I would log onto the ePrint website it would show as connected and it was all good.
So then what happened was it was all fine then the next day when we want to print something the computer says the printer is offline. I go on the HP ePrintCenter website and it says not connected. I print out a wireless network report page and it says not connected. After I printed that test page, I guess it woke up the printer enough or something as it then connected to the router and printed fine as well as showed up as connected on the ePrintCenter website. So all was good. Then the next day the printer goes to sleep and again it shows as disconnected.
Should it not be staying connected in sleep mode? How will the printer know something is being sent to it and that it should wake up if it is not staying connected?
Any suggestions of what I should change with the settings? I suppose I could try setting the IP settings as static on the printer itself but I shouldn't need to as I set it to static on the router. When it finally does reconnect it does always keep the same IP. If that is what is required I guess I could do that but then what is the point in having an automatic setting if it doesn't work? I would rather have this issue fixed that have to do a work around for it.
Thanks in advance!

Hi,
The printer should stay connected to your wireless network after the printer enters the sleep mode.
This is not an expected behavior.
I believe such an issue may be caused due to a signal quality or any conflict as too many broadcust on the same channel.
Please try the following steps in order to better understand the issue:
Follow the Wireless Setup Wizard if your printer currently disconnected
Enter the Setup menu.
Enter the Network menu.
Click Wireless.
Click Wireless Test Report.
What is the signal quality provided by the report and what channel used to broadcast by your router?
If you may scan and attach the report, it may help to better understand any possible cause.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

SOLVED! HP Officejet 6500A E710 will not stay connected to the network. scanner not connected

After 5 hours of live remote HP tech support, and 10 more hours of web searching, I am happy to say I have solved the wireless network connection issue with scanning and printing using the HP Officejet 6500A E710n-z. I notice that there are a lot of people with similar issues with no common, successful fix. Here is what worked for me.
Background Info:
Upgraded internet service from 9Mbps to 27Mbps...Provider brought out new Arris DG860 modem/router. Configured network and connected all clients (smart phones, PCs, Tablets, etc) successfully accept the printer. With this new router/modem the printer/scanner/fax would not connect to my PC at all (Windows 7 64-bit). The Officejet was always connected to the network, however, anytime I tried to print I would get an error "Unable to connect to the printer...", and when I made an attempt to scan.."Scanner not connected, make sure it is connected to the network..." blah blah blah.
Process:
After searching the web for solutions with no success, I finally made my first call to HP tech support. Tech tried numerous fixes: many network changes (channel, static IP, etc.), made changes to Windows system settings and registry, installed new software and drivers, ran the scan doctor, partial, semi, and full reset on the printer. He changed my wifi channel to 6 (or 11) from AUTO and whola. That seemed to fix the problem. After hanging up the phone 10 minutes later "No connection" errors again. Made a second call to HP Tech Support, and this new tech basically tried all the same fixes as the first tech. Worked again for 10-15 minutes then disconnected. Made third call to tech and this individual tried the same fixes as the previous two, but to no avail. He said he would have to direct me to a more Advanced Technician and would call back tomorrow. They called back the next day, and this new tech fixed the issue within 20 minutes.
Problem/Solution:
The fourth "more advanced" tech made one change in my network configuration settings. He changed my network mode from B/G/N to B/G and now the printer/scanner/fax stays connected and works like brand new. The only problem is that all my devices (including the Officejet) are 802.11N capable. Setting my network to the old B/G mixed mode slows my speed down just a bit. Using B/G/N mode or N, my download speed is 27 Mbps. On B/G mixed my speed is 25Mbps. Not too big of a deal, though. All the HP Support Techs were very nice and helpfull. They refunded my $25 Tech fee [fee charged when product is out of warranty] because the problem is not "technically" solved, even though it does work. Conclusio: This seems to be an issue with my the modem/router provided by my ISP. Could also be that it is an older Officejet and need to upgrade. To Fix Follow the Steps Below:
Step 1: Find your default gateway IP...usuall 192.168.0.1 or 192.168.1.1 or similar. Type this IP into your web address bar and hit enter.
Step 2: Enter the username and password. This is normally set at factory default --> username: admin ....passowrd: password .... or .... admin
Step 3: Go to the "Wireless Setup" tab and under the "Advanced Options" and "Wireless Network Settings" change the "Wireless Mode" to "B/G mixed".
Step 4: Click "Apply" then close the browser.
You may, or may not, lose your wifi connection for a short period while the new settings are applied and you may, or may not, have to power cycle your modem/router. That's it. Worked for me and I hope it works for you too. If you have any questions or comments please feel free to post.

OK, that all sounds right. Here are a few more router config ideas:
1. Make sure that 802.11g mode is available, along with others is OK, but 'g' must be present.
2. Change the channel to 11.
3. Use WPA or WPA/WPA2 encryption, not WPA2 only.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

My Macbook will not stay connected to the internet, while my Dell computer works fine. Why? What can I do?

My sister and I both have Macbook Pros that will not stay connected to our internet (wifi). Our dell computers and HP computers in the household work great- but both of the Macs do not stay connected, and often say "you are not connected to the internet". I have saved our wifi name to the computer so it is registered as our home network- but it still will not work fast or stay connected for long periods of time. Is there a setting I need to change, or anything I can do? Very disappointed with how the Mac works with our wifi.

Mac's will have trouble connecting to WEP Encrpyted and/or "hidden" / "invisible " networks.
OpenWEP (insecure) or WPA2(AES) is the only secure standard.
..WiFi, Internet problems, possible solutions
WiFi security issues, at home and WiFi hotspots
Also make sure the date and time are current and updating to Apple's servers for your location in System Preferneces > Date and Time. Then reboot and reconnect.
If your still having trouble after this, take both machines back to the store for a free evaluation.

IPad 3 and iPhone 5 will not stay connected to wifi although I am close to router and have strong signal

iPad 3 and iPhone 5 will not stay connected to wifi although I am close to router and have strong signal. I have to keep joining the network or restarting devices or forgetting network and rejoining it. As a side note my 1st gen iPhone which I upgraded to iPhone 5 yesterday always stayed connected!

The steps to try would be to:
1. Restore the iPhone to Factory.
2. If that does not solve the problem replace the iPhone.
If Verizon is offering to replace the iPhone for free under warranty I would go with that option.

Mail 4.4 and Exchange 2010: not staying connected

I am using Mail 4.4 connected to an Exchange 2010 account, and with an SMTP server instead of the actual Exchange connection to send outgoing mail due to the "no from: field" issue.
I have noticed that Mail is not staying connected to the server. IIRC, Exchange is intended to be a live connection, and messages that arrived quite some time ago are nowhere to be seen until I click "Get Mail." Up to now, I've relied on IMAP with IDLE for mail, as I'd rather receive everything in real time instead of relying on a scheduled polling interval.
Why is this? Is it just an issue of being Exchange 2010 instead of Exchange 2007, or is there something I can do to fix it?
My iPhone running iOS 4.2 works perfectly with the same Exchange account.

IMAP with IDLE for mail, as I'd rather receive everything in real time
Certainly in the current version of Mail, you'll get more of a push effect if you use IMAP IDLE instead of EWS for communication with an Exchange server. Exchange Web Services feel less responsive.
The Get Mail routine is much quicker with IMAP IDLE than with EWS. With EWS: the more mailboxes you have, the longer it takes.
However: if you use IMAP instead of EWS, some features of Exchange will appear less graceful. Noticeable with e.g. messages relating to calendaring.
(Note to self: I should review this after our organisation has completed its transition from Exchange Server 2003 to Exchange Server 2010.)
messages that arrived quite some time ago are nowhere to be seen until I click "Get Mail."
Using EWS: in the absence of a real-time/push effect, three approaches come to mind:
a) pull manually (click Get Mail)
b) prefer a schedule
c) simply move or delete any message to trigger an update of that mailbox.
For my Inbox, I prefer (c). An update of the Inbox alone is much faster than the (Get Mail) update of all mailboxes.
Eventually, I guess that Apple will improve Mail to make it respond immediately to changes on the EWS side.
Then, I'll go back to using e.g. GrowlMail to weed most messages immediately, as each one appears (much more pleasing than ploughing through a massive Inbox).

WRT54G v.5 will not stay connected to new laptop/Windows 7 Premium

WRT54G v.5 will not stay connected to new laptop/Windows 7 Premium. It continuously runs through a cycle of detecting, connecting, losing connection; detecting, connecting, losing connection, etc. A the router runs through this cycle, basically acting as if I have disconnected then reconnected to power to reset it, it disrupts my Internet connection to both my wired iMac and other, wireless desktop upstairs. Paid for Linksys support today and through remote access he set up a new network on my desktop (iMac). After he finished, the problem still existed. When I told him the problem hadn't been fixed, he told me just wait for an hour or so and it should work itself out. It, of course, did not work itself out. Any ideas out there?
Solved!
Go to Solution.

Never mind-I seem to have fixed the problem with a simple firmware upgrade. Funny how the Linksys support technician didn't think to ask what version of the router I have or suggest that I should try upgrading the firmware first. He was, however, quite good at trying to upsell me to a new router instead of trying to help me fix the problem I was having. Makes me want to go buy Netgear next time, thank you very much!

E71 Not staying connected to email for sync/new em...

Similar Messages

Maybe you are looking for