E72 or E7 with additional input languages and spel...
Hi.
I have a E72 with swedish keyboard and a language package with english, swedish and finnish.
i am occasionally writing messages in other languages as well (norwegian and polish).
norwegian input is not a problem, i just use the Symbol key. Polish symbols are not possible though.
And spellcheckers (prediction) is not possible for norwegian nor polish.
i have seen it is possible on android phones.
i really do not need a proper polish keypad as long as i can create the characters, but i would very much appreciate predictive input for norwegian and polish.
Is there a way to add polish as an input language and add the two spellchecker languages without changing the language package from swedish on the E72?
how about the E7?
Hi
These phones only have standard language packs, so you can't add what you want. There is a complete list of all the language packs somewhere, but I have no idea, which of them contain Polish. Mine has Danish, English, Icelandic and Norwegian...
I would love Brazilian Portuguese, which I write quite a lot, but then with Portuguese you _can_ get away with no accents at all, although it doesn't look very nice...
hughm_nyksj_dk
Similar Messages
-
Adding additional input languages
Hello,
I am trying to add an additional input language and have done the following so far but input is still English when I switch to Korean.
Control - Panel - Region Language - Change Keyboards or other input methods
Keyboards and Languages tab - Change keyboards - General tab - Add - Korean
When I toggle to Korean on the Language bar and type, it's still in English so I must be missing a step or two.
I am using Windows 7 Pro 64 bit.
Thanks in advance.Windows 7 language packs are available for computers that are running Windows 7 Ultimate or Windows 7 Enterprise.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ” -
How to get the fixed result in a DES/CBC mode with fixed input data and fix
How to get the fixed result in a DES/CBC mode with fixed input data and fixed key. Below is my program , I tried to get the checksum of the DESInputData with the DESKeyData, but each time the result is different.
below is my code:
byte[] DESKeyData = {(byte)0x01 ,(byte)0x01 ,(byte)0x01 ,(byte)0x01, (byte)0x01 ,(byte)0x01 ,(byte)0x01 ,(byte)0x01 };
byte[] DESInputData = {(byte)0x31 ,(byte)0x31 ,(byte)0x31 ,(byte)0x31,(byte)0x31 ,(byte)0x31 ,(byte)0x31 ,(byte)0x31 };
SecretKeySpec skey = new SecretKeySpec( DESKeyData, "DES" );
Cipher cipher = Cipher.getInstance("DES/CBC/NoPadding");
cipher.init( Cipher.ENCRYPT_MODE, skey );
byte[] result = cipher.doFinal( DESInputData );Use class javax.crypto.spec.IvParameterSpec to specify IV for CBC mode cipher:
// Create CBC-mode triple-DES cipher.
Cipher c = Cipher.getInstance("DESede/CBC/PKCS5Padding");
// Specify IV.
IvParameterSpec iv = new IvParameterSpec(new byte[] { (byte)0x01, (byte)0x23, (byte)0x45, (byte)0x67, (byte)0x89, (byte)0xAB, (byte)0xCD, (byte)0xEF });
// Initialize cipher with proper IV.
c.init(Cipher.ENCRYPT_MODE, yourKey, iv);
// Encrypt and decrypt should work ok now.
For more info about cryptography, search the Internet for IntroToCrypto.pdf from mr. Phil Zimmerman. This document is also part of PGP (http://www.pgp.com).
An excellent book is 'Applied Cryptography' from Bruce Schneier (http://www.counterpane.com/applied.html).
Regards,
Ronald Maas -
I was messing with my keyboard languages and i put it on a different language then i got distracted then my iphones autolock locked my phone and now when i try to unlock my phone it doesnt have the correct letters that i have in my password so now it wont unlock. If i restore it will unlock or will i just be screwed??
HELP ASAP!Yo can't. apps are locked to the account thatpurchased them and in-app purchases can only be mad with the account that originally purchased the app.
You will have to recover use of the first account
How do I change or recover a forgotten Apple ID Password?
If you've forgotten your Apple ID Password or want to change it, go to My Apple ID and follow the instructions. SeeChanging your Apple ID password if you'd like more information.
If necessary:
Forgotten Security Questions/Answers
You need to contact Apple by:
1 - Use the Express lane and start here:
https://expresslane.apple.com
then click More Products and Services>Apple ID>Other Apple ID Topics>Forgotten Apple ID security questions.
or
Apple - Support -form iTunes Store - Contact Us
2 - Call Apple in your country by getting the number from here:
http://support.apple.com/kb/HE57
or
Apple ID: Contacting Apple for help with Apple ID account security
3 - Use your rescue email address if you set one up
Rescue email address and how to reset Apple ID security questions
For general information see:
Apple ID: All about Apple ID security questions
If you have not uses any of the $10 you redeemed to the new account, you can likely get that refunded by contacting iTunes
Contact iTunes -
Invalid readings with additional inputs
I am using a PCI-MIO-16E-4 daq. I have three 0-100 mV input channels and three 0-10V inputs. If the 0-10V channels are read simultaneously with 0-100mV channels, the 0-100mV inputs are incorrect. Is this a common problem? How do I fix it?
It seems that the gain setting is not set right.
For the channels that are 0-100 mv, set the gain to min=0, max=100mV
and
for the 0 to 10 v, set it to min=0, max=10 volts
There could be issues (with settling time)at high scan rates when the gains are set differently, but for most part, it should work. -
Use different language and Spell check
Hello, just got an iPad to supplement my two Android phones, and like it so far...
Except for one thing that drives me nuts...
The spell check. I live in Scandinavia, but like to use English as my interface language. This causes major problems, when I write something in Danish.
Is there any way to have English as the interface language, but use another language for spell checking?
Also, is there a way to use two different languages in spellcheck? Its really annoying to have English words pop up as suggestions when I write something in a different language and vice versa...From a user perspective this is wrong UX and lacks total support for multi-national companies, especially when the (national) keyboard layout differs from the (foreign) keyboard layout that is being forced to use if one wants the spell check to be performed in the foreign languge.
Let's take the following example. My language settings are set to English because I want my interface in English. The used keyboard layout is Flemish (=Dutch) (AZERTY). When writing emails the spell check is performed in Dutch since iOS uses the keyboard related language. This is fine as long as I write emails to people in Belgium which do read and speak Dutch. However when I want to write English emails (and hence would like English spell check) I am forced to switch my keyboard to English (UK). This is not really OK as switching the keyboard messes up the layout I am used to work with (English -> QWERTY).
Essentially, the selected keyboard (and keyboard layout for that matter) shouldn't have any impact on the used language for the spelling check. To be honest I can't remember of any application/OS used so far that applies this logic.
I really do hope that this gets fixed in some way (e.g. by adding the option to select the spelling check language) in a future update of iOS. -
Automatic KM search with no input field and no "Search" button
Hello,
I would like to make an automatic KM Search ( a kind of iview that when it loads it doesn´t show the input query field, it just shows the results of a hardcoded query string, with no need of pressing the "Search" button).
I tried to do it passing parameteres to a com.sap.km.cm.basicsearch , for example:
"ConfigFileName=Navigation.xml&StartPage=SearchPage&Validate=false&QueryString=MARADONA&layoutSetMode=exclusive "
but :
1- you have to push the "Search" button to see the results
2- it shows the input field, so user will be able the change the string.
Any suggestions? Thanks in advance.Removing the input field is slightly more complex.
1) Duplicate the UISearch Options set (from System Admin,System Config,KM, CM, User Interface, Search, Search Options Set)
2) In your duplicated Options Set, Show Advanced Options. Deselect the option to "Enable Further Search After Quick Search". Additionally, you might want to disable some if not all these options.
3) In your search iView, set the Search Options Set parm to the name of the Option Set you created in step 1.
Hope this helps.
Regards,
Frank Nacy -
Help with delimiters, input files, and mapping scheme
A node has a name, processing power, neighbors, and cost to each neighbor
I'm reading this data from an input file:
node power neighbors cost to each neigbor
A: 1.1 B, C 4, 5
B: 2.3 A 4
C: 3.1 A 2
I use StringTokenizer to capture each group.
I place each group in an ArrayList.
The problem is mapping B,C to their cost from A, etc.
I have a Node class
I have a Link class
I just don't what method to retrieve the neighbors and cost to it's srcOk, I'm trying to create a graph
I'm using an arraylist for the name of nodes, an arraylist for the processing power, and an arraylist for the neighbors and cost. I just don't know how to map the neighbors and cost to name of the nodes.
Help me!!!!!!!!!
I created a Node class with a name and processing power, and neighbors
I create a Neighbor class with a name and cost!
The data is coming from an input file..............
I uses and array to allow the user to create as many nodes and neighbors, but I need to get the information on each node. HEEEEEEEEEEELP ME -
ObjectListItem with additional input controls like Switch
Hi there
I have a sap.m.List and use ObjectListItem to display the information for every single item. However, I have the requirement to add input controls like sap.m.Input and sap.m.Switch. As the layout of ObjectListItem works great for me, I don't want to switch to another ListItem type.
Is there a way to do this?
If not, how can this be solved? Is it needed to extend the ObjectListItem? If so, in which way do I have to extend it?
Any ideas would be great!
Best regards
TobiasHi Tobias,
As I understand, you want to create a list, which will have Label at Left and the desired UI Control(Input, or Button, etc) on Right side, like below ->
Inside a List view -->
Label1 Input
Label2 Button
Label3 Switch
corect?
This can be done. Please check following code.
new sap.m.List({
items : [
new sap.m.InputListItem({
label : “Quantity”,
content : new sap.m.Input( { value : “10” } )
new sap.m.InputListItem({
label : “Product Name”,
content : new sap.m.Input( { value : “Cake”, type : sap.m.InputType.Password } )
new sap.m.InputListItem
label : "Discount",
selected : true,
content :
this.CheckBoxRememberMEOption,
select : function()
Hope you are looking for something like this. Do let me know.
Regards,
Suraj Kumar -
I have three input languages and their dictionaries enabled in Firefox. However, when I start typing in Spanish, the whole text will be underlined as having spelling mistakes because if the dictionary is set to English. I am constantly writing in either English, Spanish, and/or French, and find it annoying to have to change the dictionary manually. Is there a way that Firefox can detect the input language being used and change the dictionary automatically?
Try the [https://addons.mozilla.org/en-US/firefox/addon/3414/ Dictionary Switcher] add-on.
-
Planning Folders with multiple input and output layouts
Hi,
I have a planning folder with one input layout and 4 output layouts. The input layout has a GPS assigned to it which will be executed before layout change. Will this function get executed when I open any of the output layouts(out of 4) not necessarily the immediate output layout (next to the input layout) and will the calculated data be displayed accordingly. Can some one please confirm me on how that works.
Scenario2: I have one input layout and 2 output layouts. The input layout has a GPS assigned which will be executed before layout change and the first output layout has another GPS assigned which is basically a push button. Then how does this work.
Points will be assigned . Help is greatly appreciated.
Thanks,
VamsiGPS will not be executed when you open any of the output layouts but will be executed only when you open the input layout. Yes, the calculated data gets stored in planning buffer so it will the displayed in input/output layouts accordingly.
Scenario2: The GPS assigned to input layout will be executed when you open the input layout. GPS which is assigned to output layout in the form of a button will be only executed when user will click on that button. Calculated results will be available in all the layouts as the result remains in planning buffer until user explicitly click the 'SAVE' icon in applpication toolbar. -
OS Language Vs. Input Language. How they can coexist?
Hello everybody.. I'm dealing with a Language conflict..
My Mac OS X 10.5.8 Leopard works in English, but my Input Language (almost everywhere: MS Word, Textedit, Browsers, ect.) is Italian.
Here I have a problem: when I write in italian, the OS automatically use the English Grammar Test and signs as wrong almost every words!
To avoid it, I must turn the OS Language to Italian.. but I'd like to keep the OS in English (even with Italian input language).
Is it possible in someway?
Thanks a lot if you can help me.
Alberto from Venice/RomeHi Alberto,
Not sure how many Apps this works for, but say in Text Edit...
In TextEdit, you have the option to run a spell check session in a different language. To do this, go to the Edit menu and choose "Show Spelling and Grammar" from the "Spelling and Grammar" submenu. With the checker open, choose the desired language you would like to use from the menu at the bottom of the window. -
Hi All, I want to be able to create bilingual messages (English& Russian)on my Torch (SMS, emails etc) but there is no Russian in the list of additional input languages. Amongst supported languages there are Catala, Greek, Czech etc so I don't see why no Russian... Does anyone know how to get Russian? Thanks a lot in advance
Hey Ksenia,
Language support is determined by your service provider, some service providers do not offer all Language support packs. Here is how to obtain language packs for BlackBerry: http://btsc.webapps.blackberry.com/btsc/KB13067
Cheers.
-HB
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)! -
Im using an iMic to record but now it all of a sudden won't pick up anything played through it, yet if i turn on garageband it works. logic pro does acknowledge that the imic is plugged in but still won't pick up any sound, even with audio input : imic and audio output : external speakers. is this just logic pro not working properly?
Same problem - happened after recent logic update.
-
Hello!
I just got myself a brand new E72 and am quite happy with it. The only problem so far - but a very serious one for me! - is that I cannot type in Bulgarian. Right now I have English, French, German, Dutch and Romanian input languages.
Is there a way to have Bulgarian added?
Thank you all for your help!bobi1024 wrote:
I've send an e-mail to my local Nokia Care Point Center and they've answered that is impossible to add Bulgarian input languag to my Nokia E72.
In the world of software nothing is impossible I believe so what do they know after all
Not absolutely everything is possible using software ! What they mean is they don't have a Bulgarian language that they can add to the phone and have no plans to either
E71-1(241.04) RM-346 300.21.012
Maybe you are looking for
-
PDFs created from Save As PDF when Printing?
I a m working in QuarkXPress 6.5, creating a business card using PMS colors and CMYK tifs. When I "Save As a PDF-" from the Print dialog box, I think everything is okay. Then I send it to a printing company and they double-check the image and say it
-
Select Partner Bank Type from F110
Dear Experts, I have 1 vendor which has 2 bank accounts Bank Type = 21 ; Bank key = MBB ; Bank Account = 12345678 Bank Type = 22 ; Bank key = BBC ; Bank Account = 98765433 I want to have options to select Bank type while perform automatic payment. Is
-
Doc Curr and Item Cond. Curr should be same for SO Creation
Hi Experts , I have an requirment as while creating SO the Document currency and Item Condition Currency should be same otherwise it should not allow to SAVE the SO. This type of senario becomes when in costomer master it is maintaned as some other c
-
Outlook Mail sync without wireless access
Several members have asked about this, I haven't seen a definitive answer. If there is one, please point me to it. Otherwise, the question is: How do I sync mail files from Outlook to my Centro without using Versamail and wireless? I don't have a w
-
why does an unknown error (-42110) appear when i try to play a rental movie that has downloaded already?