E90 firmware upgrade problems

Recently, I upgraded my E90's firmware from the version 7.xx to 300.34.84. I backed up all the data on the phone prior to the firmware upgrade - as required for the retention of software certificates and data. 
Some of the trouble I'm having now is with the Download! folder, specifically the Applications subfolder - it does not update it's content - actually, it's totally unaccessible. Also, the Windows Live Application no longer works - and I'm unable to download a fresh copy as a result of the problems with the Download! folder. Prior to the firmware upgrade, I had using the Windows Live Messenger application and the Windows Live email/messaging synchronising facility in the Messaging folder hitch-free for about three months.
Any ideas?  Thanks  
By the way, I don't think the upgrade in this case has much merit. Other than the A-GPS, there's no real substance in 300.34.84.
Symbian connected me to the world, to my dreams.. Thank-you Nokia

I just saw a post for the exact same problem on an E71. Search 'E71 Download! folder: Service Not Available' by hazz on this site. See my problem is I'm not too interested in the third-party software available from ea.mobile.nokia.com/ea/apps/. I'm interested in the ones that become available in the Download! folder, under Applications. When I click on Applications, the chevron appears, followed by the progress bar, which fills almost completely, then shows the this message: 'Catalog update failed!' I believe my internet connection is working fine - I watch youtube on the device often.
This week, a new link appeared - U2 - Get On Your Boots - which great, 'cause U2 rocks. But, Applications remains dead - even if I remove it from the list and click - Options/Select/Refresh List.
I got around the Windows Live problem by using the awesome Nokia Messaging (email) [http://email.nokia.com], and the instant messaging application mxit. Besides those minor issues, I think the E90 is a pretty awesome device.
Thanks
Symbian connected me to the world, to my dreams.. Thank-you Nokia

Similar Messages

  • **SPA2102 FIRMWARE UPGRADE PROBLEM WITH 5.2.12

    I'm having problems loading firmware 5.2.12 onto my SP2102-R ATA.  I have my laptop PC running Windows 7 directly with an ethernet cable from my laptop to the ethernet connection on the back of the SPA2102.  I run the .bin file and In order to get the software to the upgrade stage I have to enter ****, 73738 1# to move to the next stage.  I have now been waiting for 1/2 hour waiting for firmware download request from SPA.  IT DOESN'T GET PASS THIS STAGE.......CAN SOMEONE PLEASE TELL WHAT I'M DOING WRONG OR WHAT I NEED TO DO DIFFERENT?
    Thanks......

    Based on my experience with the SPA2102-NA, it is not necessary to do a factory reset (*73738) in order to perform a firmware upgrade/downgrade.
    However, now that you have done so, any and all previous user settings will have been reset to the original factory settings (including user set passwords - assuming your ATA is an un-locked SPA2102-NA).
    If you think the firmware 5.2.12 is faulty, then repeat the upgrade/downgrade process by downgrading back to an earlier version:
    http://www.cisco.com/cisco/software/release.html?mdfid=282414111&softwareid=282463187&release=5.2.12&relind=AVAILABLE&rellifecycle=&reltype=latest
    If you are still having problems, see if this tutorial will reveal any procedural issues:
    http://blog.cqvoip.net/2009/12/linksys-cisco-spa2102-updating-firmware.html
    Regards,
    Jeff - cqvoip.net

  • E90 Firmware upgrade

    I have downloaded and installed the Software Updater. However, while running it, it wanted to download a 73mb firmware upgrade. My problem is that because I have a slow connection, 73mb can take up to 3 days to download so I had to cancel it.
    Is it therefore possible to download that upgrade piecemeal (using GetRight) and run locally instead of being connected 24/7 to the Internet?
    Regards.

    Your options are:
    - go to a friend, relative, colleague, university, etc., where a higher speed network connection is available, and update there
    - go or send the phone to your nearest Nokia authorized repair/service center and ask them to do the updating for you
    - get a faster internet connection at home
    - live without updating the firmware until one of the above options become viable for you

  • Nokia E90 firmware download problem

    Hi - I'm trying to update my Nokia E90 firmware from 210.34.75 to 300.34.84 and the 81.9MB file downloads perfectly (in under 3 minutes) until it gets to 60.3MB and then stops. Any ideas? I've un-installed the entire PC Suite and its add-ons, an no luck. Any ideas? Thanks, Ian.
    Attachments:
    Nokia-E90-NSU-Fail.jpg ‏47 KB

    I also had trouble downloading the software upgrade (from version 7.xx to version 300.34.84) for my E90. I tried three times before it actually begun to download - upon which, the download and upgrade went by successfully. I agree that the upgrade - even from my very old/early firmware - was almost completely pointless. Some of the trouble I'm having now is with the Download! folder, specifically the Applications subfolder - it does not update it's context - actually, it's totally unaccessible. Also, the Windows Live Application no longer works - and I'm unable to download a fresh copy.
    I backed up all the data on the phone prior to the firmware upgrade - as required for the retention of software certificates and data.
    Symbian connected me to the world, to my dreams.. Thank-you Nokia

  • X4600m2 bios/ilom firmware upgrade problem

    In the X4600m2 downloads, under Software 2.3, in the firmware category, I downloaded ILOM-3_0_3_31_r42822-Sun_Fire_X4600M2.ima (md5 checks out). I can't install the new firmware however (using the ILOM cli):
    -> load -source tftp://172.22.95.215/ILOM-3_0_3_31_r42822-Sun_Fire_X4600M2.ima
    NOTE: A firmware upgrade will cause the server and ILOM to
          be reset. It is recommended that a clean shutdown of
          the server be done prior to the upgrade procedure.
          An upgrade takes about 6 minutes to complete. ILOM
          will enter a special mode to load new firmware. No
          other tasks can be performed in ILOM until the
          firmware upgrade is complete and ILOM is reset.
    Are you sure you want to load the specified file (y/n)? y
    Do you want to preserve the configuration (y/n)? n
    Image is not for this platform.
    Firmware image update failed.
    ->With all previous releases this worked fine.
    Update: the upgrade on the ILOM web interface also fails.
    I'm running this version currently:
    -> version
    SP firmware 2.0.2.10
    SP firmware build number: 38791
    SP firmware date: Tue Nov 4 18:36:42 PST 2008
    SP filesystem version: 0.1.14
    Any idea why this is failing? I've tried both preserving and not preserving the configuration.
    Edited by: kaufmann on Jul 22, 2009 9:27 AM

    Quote from: renewest on 14-July-12, 19:43:52
    Are you saying that it worked before because of an error? I've worked with boards before tha supported 2 monitors, 1 on the mainboard and 1 on a graphics card.
    Quote from: renewest on 14-July-12, 19:43:52
    Are you saying that it worked before because of an error?
    Yes.. normally onboard become automatically disabled, when dedicated card is installed.

  • Nokia n80 firmware upgrade problems

    Hi all i just tried to do a firmware upgrade using the nokia sites stuff and my pc crashed and now my fone wont turn on could some1 please tell me
    1 if this is terminal
    2 if i can sort this out myself
    3 point me in the right direction for the info i need to sort out my 3 week fone
    4 how much i should expect to pay if i HAVE to go to a shop to get it sorted
    thanks in advance for any help given

    Right first thing I would try is to connect your mobile to your pc and try running NSU again. If it connects to your N80 great you should be able to just start over.
    (Tips: Run only the NSU on PC close all other programmes down. and ensure your N80 is charged fully or at least plug your charger into the N80 whilst doing the update.)
    If your N80 Isn't recognised by the NSU then its dead and the only way go revive the poor little things is to:
    1: Take is to a Nokia Service Centre. Carphone warehouse is usually your closest NSC, If your lucky they will have an 'on site' techinician and he will fix your N80 within an hour or same day, if not then you will have to leave it with them for a week or so.
    2: Call your Service provider, tell them your N80 just went bye bye and they should swap it for you or at least give you a refurbished N80.
    You won't be charged by the Nokia Service Centre for any work done as your within your warrenty and if you choose to go back to your service provider you should also be covered. This has happened to me and I sent my N80 back to O2 they had a refurbished model sent back to me within a couple of days with no charges.

  • E71 firmware upgrade problems

    Hi,
    when I want start my firmware upgrade (today 100.07.76 - Vodafone branded) to the actual one via NSU, it stops always ~60 MB. Tried many things already, everything is up-to-date from Nokia and PC with XP.
    Any ideas ?
    cheers
    cafri
    Message Edited by michaels on 18-Mar-2009 12:33 PM

    It should not be anything to do with branding if the update starts downloading, if the branding was an issue you wouldn't even get acces to the update.
    There are conflicting stories about Nokia service points and debranding. It can only be done if the phone has had any SIM lock officially removed by the network, and the service point may in some cases ask for a letter from the operator stating their approval for the action to be taken. Service points are not required to offer this service and so may not do, and if they do it will be at your cost.

  • After firmware upgrade problem CP1025NW

    I am trying to upgrade the firmware on my CP1025NW printer.  I downloaded and ran the firmware updater and it runs for a bit and then reports that it "Could not find appropriate firmware file". I have tried running the updater both through a USB connection to the printer and a wireless connection. Both result in the same error.
    After that on the printer is blinking caution sign and I cant print anymore (, I think soft erase old firmware and did not record new one.
    Exist some kind of special software for an force firmware update ? or how can I restore it ?

    hi there,
    could you provide the community with a little more information to help narrow troubleshooting? What operating system are we running the update from?
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • E90 Firmware upgrade available?

    Hi
    We've currently got a prototype E90 for testing on a development project. The firmware version on it is:
    V 07.11.1.0
    19-3-2007
    RA-6
    Does anyone if it possible to upgrade this? We've been led to believe by Forum Nokia Pro that there is a firmware update available but as yet cant find it. The Nokia software updater page doesnt list the E90.
    Anyone have any ideas?
    Thanks

    YES your firmare is OLD!
    You should have the latest firmware V 07.24.0.3
    You can update your firmare by installing Nokia Software Uptader NSU...
    Regards,
    Lami
    Lami
    Current Phone: Nokia E90, E61i, E50

  • Airport Extreme 7.1 Firmware Upgrade - problems with Airdisk

    I recently upgraded the Airport Extreme firmware from 7.0 to 7.1 but have experienced several problems.
    After the initial upgrade, I encountered a double NAT warning, which was fixed by switching into Bridge mode, followed by an invalid IP address warning. I rebooted the AE and the warning disappeared.
    Connecting to the wireless network is ok, except that it can never remember my connection (which is a closed WPA2 Personal network) and I have to manually re-connect every time I switch on the nac - with my previous Airport Express this would remember the network and re-connected automatically.
    Worst of all however is that I can no longer see my AirDisk - a LaCie 500 GB USB HD connected to the AE.
    The disk name is simply upper case ASCII and so I cannot understand why this is occurring. It worked perfectly using version 7.0. Has anyone else had these problems or aware of a workaround?
    MacBook Pro (Core 2 Duo)   Mac OS X (10.4.9)  

    The 7.1 update has caused problems for many many people.
    What I did to solve problems was to revert back to 7.0. here's a link to a post I made over at jmacrumors.com explaining how to do it:
    http://forums.macrumors.com/showthread.php?p=3690572&posted=1#post3690572

  • Nokia E90 firmware battery problem

    Hi! I updated last week my E90 to the latest firmware. Until then, my battery lasted for more than 3 days. Now, my battery lasts for only 18-20 hours when I do not make any phone call. I do not have any bluetooth or WI-FI scanner activated. I do not know what is happened. I think it is a firmware problem. Are you going to fix it?

    Hi David,
    I had the same problem too: after installing the new firmware my battery lasted for max 24 hours, even when in standby and no calls made.
    I reinstalled the firmware 48 hours ago after a full charge and the battery still is full now!!
    What you need to do, in order to be able to reinstall the firmware, is downloading the latest Nokia Software Updater software. This enables you, after the message from the updater that you already have the latest firmware, to reinstall it. As I noticed already, it worked for me.
    regards, kuzibri

  • Creative Zen Xtra Firmware Upgrade Problems v1

    While trying to upgrade the firmware on my Creative Nomad Jukebox Zen Xtra, there was a problem with the upgrade. I'm now stuck in rescue mode v.3. When I plug the MP3 player into the computer, Windows will recognize it and asks me what to do. I exit that window and try to run the firmware update again. The firmware program tells me "Your player is not connected, please connect your player."? there are 2 options "Upgrade" and "close". Upgrade is greyed out, but close is clickable. I've tried
    1. clean up,
    2. format all,
    3. reload OS and
    4. Reboot.
    None of those options seems to do me any good. I've uninstalled all the Creative software from my computer, but still no luck. Please help me. I'm doing my best to avoid having to go buy an iPod, but if I can't get my Creative Mp3 player to work, I guess I will have to. I have spent a lot of money between cables, the docking station and the leather case. I'd hate for all this to be wasted, so please help me.
    I've tried to "reload the OS" and then clicked on the language the moment the Player told me to start the update. Someone please shed some light on this for me. I've tried email Customer Support. I've searched Google. I've put my best skills on it and of course I've scoured this website to no prevail. Someone help me out.

    READ ALL BEFORE PROCEEDING You do need to install the driver. http://support.creative.com/Products...e=MP3+Players# When you get to the page for your player bottom left the manual selection choose Xp & clik submit the driver should be the first one version 2.0.00 .After the driver is installed when you plug in the player check in device manager to see that it shows up there Start>Control Panel> System>Hardware>Device Manager look under Portable Devices or for the name of the player. Use a rear USB Port to assure a good connection. Then run the firmware file on the computer ,choose reload firmware or Os on the player,choose language when player asks for update(the pop-up from windows indicating that it "sees" the device DO NOT CLOSE IT.)

  • WRT54G v8.2 failed firmware upgrade problem

    Today I tried to upgrade my WRT54G v8.2 router to the latest firmware from Linksys. But the upgrade kept repeating itself every time when the progress bar reached about 75%. This lasted more than 30 minutes and I had to stopped the upgrade. Then the router stopped working. I've reset and hard reset the router. I also tried the tftp method to upgrade the firmware again. But the problem is still there. When I ping 192.168.1.1, I constantly get the "Destination host unreachable" message. Anyone could help me fix this problem? The power light and the ethernet port light are always on. Is there any way to fix the problem? Any information is appreciated. Thanks a lot.
    Solved!
    Go to Solution.

    Do not use the wireless computer to upgrade the firmware.Hard-reset the router for 1 minute and try this link and check if that works...

  • RV082 firmware/upgrade problems

    We have an older (version 1) RV082 running firmware 1.3.6. After upgrading to firmware 2.0.2.01-tm the web management would not work (page not available). Even though the web management was not working the configured VPNs were working.   After resetting the router to factory defaults web management returned, but it stopped working as soon as I restored the router configuration.
    I ended up reverting to the older firmware and restoring the router settings.
    1) Is there a router setting I should change before upgrading in order to enable web management?
    2) In the event I need to replace the router is there a utility that will convert the saved configuration file?  I have found mention of a conversion utility but it seems to have disappeared from the Cisco web sites. 

    Update - I have now seen this behavior with over a dozen RV042/RV082 devices. Solutions are:
    Downgrading the RV082 to the 1.3.9.8 firmware
    Downgrading the RV042 to the 1.3.12.6 firmware
    Replacing the unit with the version 3 hardware (RV042v3, RV082v3). I have done this in three cases.
    In all cases, these actions fix the WAN access issues for LAN computers.
    Some additional details:
    Nearly all of my LAN clients in these situations are Mac OS X computers.
    Not all RV042 routers with 1.3.13+ firmware, or RV082 routers with the 2.0+ firmware have this issue, but more than 75% seem to develop the problem, and the problem happens soon after the upgrade to the firmware, or if the device shipped with the newer firmware.
    All devices that have the problem have one or more VPN Gateway-Gateway tunnels defined and active, but have a variety of other settings.
    The symptom of the problem is that LAN computers have no problems with LAN IP communications, including access to the router administration web pages, but have intermittent or no connectivity to the WAN. The symptom is first observed as DNS timeouts, then can progress to total loss of WAN connectivity, but this more severe situation is not as common. Sometimes renewing the DHCP lease reactivates connectivity, sometimes restarting the router is required.
    I have tried reloading firmware, factory defaulting devices, and not setting any settings except WAN IP information. The symptom was still present unless one of the above three solution actions was taken.
    The v3 hardware and software is vastly improved, and I recommend this solution for anyone experiencing this problem, and possibly as a general recommendation. Performance of faster WAN connections is improved with the new hardware. Users that require the improvements in the firmware versions that exhibit this symptom should upgrade to the v3 hardware.

  • PX6 300d firmware upgrade problem

    Hello all. We are trying to upgrade the firmware of our Storcenter, but the problem is that when we attempt to upload the ".tgz" file, the browser shows a message that said: "The software could not be updated", we tried with IE8, IE11, Chrome, Firefox and different O.S. like MacOS and Windows 7, 8 or 2008. We follow the steps detailed on this link https://lenovo-na-en.custhelp.com/app/answers/detail/a_id/27366. Firmware of our Storcenter: 3.2.3.14250  Any idea?Thanks in advance.

    Hello PabloRusso
    Please be sure that your are trying to use the correct update files in order.
     px4px6-NOBRAND-3.2.3.15290.tgz would be first
    px4px6-4.0.2.9960.tgz would be second
    and then you can go to px4px6-4.1.106.31982.tgz
    Your px6-300d should be running version 4.0.2.9960 or above before updating to version 4.1.106.31982. If your px6-300d is running version 3.2.3.9273 through 3.2.3.15290, you can update using px4px6-4.0.2.9960.tgz and then update to 4.1.106.31982. If your px6-300d is running a version lower than 3.2.3.9273, you need to upgrade using px4px6-NOBRAND-3.2.3.15290.tgz, and then update to 4.0.2.9960 before updating to 4.1.106.31982.

Maybe you are looking for