EA6350 Device List Doesn't Work Correctly

Device list doesn't show all devices on the network. Some are shown OFFLINE when in fact they are ONLINE.
Other devices that are connected don't even show up at all.
For instance, I have 15 devices on the network, some wired and some wireless, but only 10 devices show in the device
list. The other devices have connectivity but never show in the device list.
Called support and was told to update firmware and reset the router. Tried all of that but to no avail.
The device list is still incorrect.
When will Linksys engineers fix the firmware?

Make sure that your devices are set to obtain an automatic IP address. Check some of the devices which appeared on the list. It could be that some devices have multiple addresses listed below them, and if such is the case of your network, I suggest you inform Linksys Support about it.

Similar Messages

  • Dynamic Entry List doesn't work correctly on Visual composer  7.3

    Hi,
    Well I create two Dynamic Drop dow list box in the model of Visual Composer 7.3 and I Linked the two Dinamic drop down boxes ( i.e. drop down box "country" is linked with drop down box "state"), where the 2nd drop down is populated by the entries of the 1st drop down by the help of a web service.
    When i run the model and chose one item form the 1st drop down list, the 2nd drop down list work's fine but when i select again the 1st drop down list and change the item for another, the 2nd drop down list try to refresh the data and erase the descripcion of the item but don't erase the value of that item and when you select the 2nd again the value appears like another item to select..
    Has any one experienced this problem and can help on this?  
    Thanks in advance AllenXP.

    Hello,
    Could you please send me a simple model that demonstrates the case you are talking about?
    For your convinience I've create SAPMATS container. So you can upload the model example using this link:
    https://sapmats-de.sap-ag.de/upload/index.cgi?id=XTGM95R7EH199IIGMCWJ6QK43592SXT1Z9CVCQ57D7QI8XRS8F
    Thanks,
    Talia

  • X-fi Extreme Gamers not in IRQ list, doesn't work at all.

    9X-fi Extreme Gamers not in IRQ list, doesn't work at all.O Lo mates,
    my specs:
    Intel C2D E8500
    Gigabyte GA-EP45-DS3R
    Club3D ATi 4870 52MB
    2GB OCZ
    2 WD Raptors connected to onboard raid controller
    X-Fi in PCI slot
    my problem:
    The X-fi isn't working as it should. It's not getting detected in bios / POST so it can ofcourse not be working in any OS (currently running Win7 7068
    I used to own a AMD 2500 / Asus A7N8X-E deluxe, and it used to work, but when I upgraded to a C2D E6600 / DFI Infinity it only showed up 3 times in my IRQ list / OS. This ofcourse is to blame to Creative, because they dont care about the PCI standard and didn't implement IRQ resource sharing in the Extreme Gamer card. After upgrading to my current setup (listed above) it's still not working at all, even though I tried disabling all onboard devices I dont use, and manually mapped IRQ channels to the PCI ports so they wouldnt share.
    The X-fi is fine, I recently put it in another pc with another brand motherboard, and it was detected instantly. Guess the guy who owns that pc had some luck with his motherboard don't feeling the need to share IRQ's at that particulair moment... its like Russian roulette.
    Is there anything i can do to get the soundcard to work even though it doesn't implement the PCI standards and therefore in my opinion failed as a soundcard and as a brand as a whole?
    Greats,
    eXistenZ
    Message Edited by existenZNL on 06-24-2009 02:34 PMMessage Edited by existenZNL on 06-24-2009 02:35 [email protected]

    = Hey mate:
    Havent seen your exact bios, but if you have a setting in it, called? reset [color="#000080" size="3">Extended System Configuration Data.
    Then that might shuffle your bios, per se and then let that card be redetected. I used to use that on my systems when swapping one single part in order to get all the IRQs to shuffle around again, and give one to my card. Do you remember when the magic number to give to your Creative card was IRQ 5, DMA Low of , DMA High of 5, address of 220 and port of 330? Well that is how I used to get my system to shuffle my printer ports and modems in order to bump that sound card to get the correct addresses. Also check to see if the edges of your sound card are blackened. Wipe them with your fingers and see if there is an ashy burned residue. This will tell you if that card has been electrically damaged, or oily/dirty. Also the backlplates on some sound cards are slightly bent and your sound card will fit into its slot, but not all the way. A hair off and that card will be picked by your system every couple of boots.
    Try this and let me know how it goes for you.

  • Game Center doesn't work correctly

    Game Center on iPod Touch 2nd Gen doesn't work correctly under iOS 4.2.1
    It shows wrong language (Englist but not my native language. My region setting is right and the system language right too.)
    Besides, the "Games" page only has a button "Find Game Center Games", while it should show my Game Center Games.
    The Friends page shows all my friends. But when I press a friend the sub page doesn't show the game my friend and I have in common.
    I've restored my device several times, but it didn't help.
    How to solve it?

    I've had exactly the same problem on my 2nd gen since early May when it just stopped working out of the blue.
    There are a few threads here on the subject. I believe that every 2nd gen is affected as I've yet to hear a 2nd gen owner say that theirs works.
    Other than waiting for Apple to fix it I don't think there is a solution.

  • How do I get Mac OSX 10.6.4 to print to a Canon iRC2380 colour printer? Using the driver in the Mac's list doesn't work., How do I get Mac OSX 10.6.4 to print to A Canon iRC2380 colour printer? Using the driver in the Mac's list doesn't work.

    How do I get Mac OSX 10.6.4 to print to a Canon iRC2380 colour printer? Using the driver in the Mac's list doesn't work., How do I get Mac OSX 10.6.4 to print to A Canon iRC2380 colour printer? Using the driver in the Mac's list doesn't work.

    Not sure which driver you mean when you say "the driver in the Mac's list". Apple does not provide a driver for this device, so if you mean one of the default printers that are included with 10.6, like the Generic Postscript or Generic PCL, then these will only work if the optional PS or PCL print kits were installed in the machine. Given your inability to print then it would seem that you have neither kit installed. So this would require you to install the Canon UFR2 driver, which you can obtain via this link.
    With the UFR2 driver installed, you add the printer using IP > LPD. Enter the IP address of the iRC2380, leave the Queue name blank and change the Name to iRC2380. Leave the Location field blank and in the Print Using menu, browse to the "Canon iR C2380/2550 UFR II (UK)". Click OK and then Add to complete the queue creation. You should now be able to print. Please reply if it does not work.

  • AddChild doesn't work correctly in 11.9

    comparing the two releases listed below, somehow my Flash program doesn't work correctly on the latest version anymore, nothing was changed in my program but after upgrading to the latest Flash Player, it doesn't work properly anymore, specifically, the items I add through the addChild method doesn't appear properly, was there any changes in between these versions that could have affected the addChild behavior? I'm testing with Windows  7 IE debug version and I see no script errors
    Released 10/8/2013) Flash Player 11.9.900.117 (156.2 MB)
    (Released 9/24/2013) Flash Player 11.8.800.175 (Win IE only) (50 MB)

    Could you please open a new bug report on this over at bugbase.adobe.com?  When adding the bug, please include sample code, test url or a test swf so we can quickly test this out internally.  If you'd like to keep this private, feel free to email the attachment to me directly ([email protected]). 
    Once added, please post back with the bug URL and I'll investigate internally.
     

  • How can I avoid duplicates on contacts and how do I get contacts created on iPhone/ipad synchronized on my mac? so far it doesn't work correctly, just sometimes. same for icalendar

    how can I avoid duplicates on contacts and how do I get contacts created on iPhone/ipad synchronized on my mac? so far it doesn't work correctly, just sometimes. same for icalendar

    On your Mac, for duplicates, switching Contacts off then back on in System Preferences > iCloud may prevent duplicates.
    On the iPhone / iPad tap Settings > iCloud. Make sure Contacts and Calendars are swtiched on.
    Try restarting your Mac and your iOS devices when items won't sync as they should.
    To restart an iOS device:  Hold the On/Off Sleep/Wake button down until the red slider appears. Slide your finger across the slider to turn off iPhone. To turn iPhone back on, press and hold the On/Off Sleep/Wake button until the Apple logo appears.

  • Automatic User Device Affinity doesn't work

    Hi, the automatic User Device Affinity doesn't work in my environment and I don't know why! The audit policies are enabled by GPO and User Device Affinity is correctly configured in SCCM. Below are some screenshots including de log of User Device Affinity.
    Anybody could help-me please?

    An old post but,
    This can happened when activating
    advanced audit policy in one of the GPO. once it was activated, it gets override the regular audit policy with different event id's that SCCM don't recognize. in addition, the machine tattooed with those settings so removing the GPO wont revert the settings.
    Check out this thread for more information and help:
    http://social.technet.microsoft.com/Forums/en-US/f3a4b675-e955-4cd2-bba6-d51ea06dd362/user-affinity-not-working-properly?forum=configmanagergeneral
    Please take a moment to Vote as Helpful and/or Mark as Answer where applicable. Thanks.

  • I am creating webpages with frontpage and trying to make collapsible lists. The lists collapse and work correctly in "preview" mode, but do not work when accessed through firefox or explorer 8. Does anyone know what I am doing wrong?

    I am creating webpages with frontpage and trying to make collapsible lists. The lists collapse and work correctly in "preview" mode, but do not work when accessed through firefox or explorer 8. Does anyone know what I am doing wrong?

    Welcome to the 'wonderful' world of HTML5 e-learning.
    In my view, from the issues I am seeing everywhere, HTML5 output from rapid e-learning tools such as Captivate is not ready for the kind of mobile device e-learning you want to develop.
    Sorry to be pessimistic, but you may need to consider going back to the drawing board and coding it from the ground up.

  • Link on my website doesn't work correctly on my iMac. It works correctly on Safari, and both browsers on my laptop.

    Link on my website doesn't work correctly on my iMac. It works okay when using Safari. It also works correctly on my laptop using either browser.

    We worked out my problem. My solution turned out to be: Firefox Preferences/Applications. Scroll down until you find "Portable Document Format (application)", click on it and use the dropdown menu to the right and changed "Save file" to "Use Adobe Acrobat Pro (default). I had trouble at first finding if the listing was under Adobe, Acrobat, or what so I used the search feature and found it immediately.
    Hope this helps.

  • IPhoto doesn`t work correctly with german "umlaut" (ä,ö,ü) in keywords

    iPhoto doesn`t work correctly with german "umlaut" (ä,ö,ü) in keywords. They get to ä̈,ö̈, ü̈ when I write the keyword a second time. Can anybody tell me why. Thank you. Heinz

    It apparently does not like non-standard English characters - use A-Z and 0-9 adn you should be OK
    report to Apple - iPhoto menu ==> provide iPhoto feedback
    LN

  • After upgrade my iphone 4 to IOS6, sound doesn't work correctly

    After upgrade my iphone 4 to IOS6, sound doesn't work correctly.
    During a phone call, there is no sound. But if I turn on the speaker, there is sound. itune works fine since it's on the speaker.

    Dear All
    i have done the same activity ( buy a new iphone 4 -> upgrade to ios5 - > configure email) with success-
    than when i start to move the contacts from old mobile to iphone (using the microsim) i receive the same crash
    in disgnosis e use i saw 2 dump with this title 'latestCrash-Preferences.plist and LatestCrash.plist. in each file the date is the same and i read:
    Exception Tyle: EXC_CRASH (SIGABRT)
    Exception code: 0x00000000, 0x00000000
    Chrashed Thread: 6
    in thread 6: name: Dispatch queue:
    com.apple.addressBookUI.ContactsSettingPlugin
    and thaan a lot of data.
    Have you any idea?
    thank in advance
    Fabio

  • Translation from CS5 to Cloud doesn't  work correct, navi and linked images are broken.

    Translation from CS5 to Cloud doesn't  work correct, <navi> and linked images are broken.
    The data of CS5 was created at another PC. I installed Cloud version into two different PC. One has had the site data since dreamweaver CS5 and it works correct in Cloud version. Another PC got the site data from remote server and it doesn't work correct. <navi> and linked image are broken.

    Another PC got the site data from remote server and it doesn't work correct. <navi> and linked image are broken.
    This implies your site is not properly defined in DW.  Go to Site > Manage Sites.
    Or simply go to your other installation of DW and export the site definition file from Manage Sites.
    Save it to a flash stick or other removable drive.  Then import the STE file into your 2nd installation of  DW.
    Nancy O.

  • ITunes 10.4 full screen with Win7-64bit doesn't work correctly.

    iTunes 10.4 full screen with Win7-64 doesn't work correctly. I have the Windows taskbar on the left side of my screen. Maximized iTunes is panned to the left.

    Same issue here. When the Windows taskbar is position on the top of the screen and then the iTunes windows is maximised, it's position is as if the Windows taskbar is at the bottom of the screen so the top of the iTunes window sits under the taskbar.
    For those wanting a workaround, hold shift and right click the iTunes icon in the taskbar/quick launch bar and click restore, at least then you can adjust it to be full screen manually.
    System:
    Windows 7 Ultimate x64
    iTunes 10.4
    ATI 5750 video card

  • [svn] 4028: Bug: Draining of buffered messages doesn' t work correctly with long-polling.

    Revision: 4028
    Author: [email protected]
    Date: 2008-11-06 09:04:26 -0800 (Thu, 06 Nov 2008)
    Log Message:
    Bug: Draining of buffered messages doesn't work correctly with long-polling.
    QA: Yes - please make sure both nio and regular long-polling channels work with throttling.
    Doc: No
    Checkintests: Pass.
    Details: Made sure that buffered messages are drained properly with all polling channels (polling, long-polling, and nio-long-polling).
    Modified Paths:
    blazeds/trunk/modules/core/src/flex/messaging/client/FlexClient.java

    Sounds like you've probably already looked but the CUPS article in the wiki led me through setting up a printer without any problems.  http://wiki.archlinux.org/index.php/CUPS
    The first section describes how to troubleshoot CUPS and printing problems.
    I've also found a few other posts and links that may help.
    http://hplipopensource.com/hplip-web/mo … eries.html
    http://ubuntuforums.org/showthread.php?t=419163
    Hope this helps!

Maybe you are looking for