Each time(whether in

I'm typed in "obtaining a copy of a marriage lincense in NC and it took me where it was supposed to.
Then I click on either of the two Vital Records site for North Carolina and it always tells me "Unable to Connect" . This isn't the first time this has happened to me, it has happened numerous times at different sites. It's just that this is the first time I've reported it. Can you help me Please??
Thanks, Jerry
[email protected]

It could be a problem with the site you want to connect to,
the link you were given is wrong, A server is out at the time.....
Go back to the page that gave you the link you want.
Right click and select <'''Copy Link Location'''>. Then right
click again and select <'''Open In New Tab'''>. If you still get
the bad page, '''STOP'''. Move the mouse to the address
bar, left click the address '''ONCE ONLY'''. Hit <'''CnTr'''> A,
The whole address should now be highlighted. Right click the
highlighted address and select '''Paste'''. Look at the new
address. Does it look, for want of a better name, Normal?
If you can't get any farther, post the links and pages in your
next message.

Similar Messages

JDev10G - Preventing OC4J Server opening a new browser window each time?

Hi,
Does anyone know how to prevent the embedded OC4J server in JDev 10g from opening a new web browser window each time I run my project i.e. I'd like the server to re-use the same IE window.
JDev 9i opened the launch page in the same IE window.
There's nothing obvious in the OC4J settings.
Could this be a client browser setting?
Not a big deal just thought I'd see if anyone has worked this out.
Thanks
David

David,
There is a browser setting for both IE and Firefox to indicate whether launching re-uses the same window/tab or opens a new one. Absolutely nothing to do with OC4J.
John

Ipod dumps entire content and must be restored and synced each time.

Second Generation iPod Nano. iTunes on Dell XPS410, Windows Vista.
Battery depleted. Plugged Nano into computer. Got a "may be corrupted screen; try restoring"♦Computer recognizes Nano; I restore and screen confirms successful restoration and tells me to sync. Sync takes place and completes successfully however my Library for the Nano device shows in "graytone" and cannot be accessed. I eject the Nano; unplug it from the computer and it works fine. Once I again plug it into the computer, everything dumps out of the Nano and I have to start the Restore/Sync process all over again. Each time the Nano is unplugged and replugged to the computer iTunes it dumps its entire content!
Would most appreciate any suggestions!

I have tried connecting the ipod via the front and back USb 2.0 jacks on my desktop. I have only one external drive connected to the computer. Doesn't matter whether I remove it or not, the same problem occurs. I do not have a network. My drive letter for the ipod is letter z so it is not disk recognition which is a problem. 1/3 of my music comes from I-tunes, the rest I rip from my Cd's (like Linkin Park, Slipknot, Dir en grey). I only used about 650 MB worth of the ipods 30 gig drive capacity. Doesn't matter which version of the itunes software I use, it gives me the same problem. The recovery loop occured after just after 2 weeks of purchasing it from the apple storeand I took it back with only 12 songs in it. The restored it and 10 days later, the same problem occured. Recently, the ipod has been entering the recovery mode much more frequently prompting me to believe the hard drive is malfunctioning.
I have scanned my computer and the Ipod with everything from Norton, AVG, McCafee, and trendmicro and found no viruses, bugs, worms, etc.
Any suggestions to help me resolve this issue would be greatly appreciated.
Thanks,
Ice

HT1807 got an unlocked iphone 4s bt it asks for activation required via a wifi or mobile network each time i put a new sim. wat if i put in a sim which doesnt have 3g and i dnt have any wifi around me? how do i activate it then?

I am living in uk at the moment and i have an unlocked iphone 4s. Each time i put a new sim in it a message appears saying ''Activation Required''. When i slide the unlock bar it asks to choose a wifi network or a mobile data network. So far this hasnt been a problem coz i always found a wifi network around me or the mobile data network worked fine. Now the problem is I am moving back to my country Bangladesh in couple of days. And back there wifi isnt a very available thingie. And mobile data network is very hard to connect. So if i put on a Bangladeshi mobile service sim in my phone how do i activate it without the wifi or mobile data network? Please some help asap would be much appreciated.

Hi Allan,
Sorry for the rant up there.. Thanks for your quick response. I couldn't get to an Apple store and can't order anything from the States that contains Lithium ION batteries -- no U.S. Postal Services will deliver these to us anymore. Target sold this to me as an unactivated Sprint phone. I never activated it through Sprint in the States and just took it to Germany with me. I updated to vs.6.0 via ITunes and without the Sprint SIM Card installed. The IPhone is now accessible (Apps, Settings, etc., to be able to check firmware, et al., settings. However, I can't tell if it's unlocked (since I upgraded the version without the Sprint SIM Card installed) until I go to the local cell phone shop and stuff in a BASE (provider) SIM card and test it out. Is there a way to tell whether or not the phone is unlocked without a SIM card in it? I don't think there is....

HOW TO STOP THE PROMPTING MESSAGE OF MASTER PASSWORD EACH TIME I OPEN MOZILLA FIREFOX?

HOW TO STOP THE PROMPTING MESSAGE OF MASTER PASSWORD EACH TIME I OPEN MOZILLA FIREFOX?

Firefox will ask for the Master Password on startup if it is needed on a page.<br />
This can be Sync or a web page that is (re)opened automatically and you have saved a name & password for this website.
You didn't confirm whether you are using Sync or not, so I don't know which of the two would apply.

LR5 crashes each time I open a folder with video

The title sums it up.
I have a Fujifilm HS20EXR folder which contains video.
Each time I select the folder, LR5 (Mac ML) crashes.
Neil

FYI It is not only the Mac version of LR5 that is having issues with videos.
On Windows, there is an issue with 100% CPU and long delay of showing videos in Library mode.
Whether the problems are related is unknown to me.
PT

Each time I have a message ''please wait while windows configures iTunes''.

when i start my itunes each time i have a message ''please wait while windows configures iTunes''. i recently Upgrad to 9.0.2. i already uninstall and install.
pls help me.
thank you in advance .

when i start my itunes each time i have a message ''please wait while windows configures iTunes''.
The iTunes desktop shortcut is an "advertised shortcut". When you click it, the first thing it does is check the iTunes.msi and determines (against the installation database in there) whether or not there's any files and registry entries and whatnot for iTunes missing on your PC. If it finds something missing, it'll do a repair install of iTunes, which is the "configures" message you're seeing.
As to why it's always doing it in your case, and fixing it ... we'd better first work out if there's real damage to the iTunes stuff on the PC or if the shortcut/itunes.msi/registry machinery is just a bit confused.
Apart from the "configures" message you're getting every time you launch iTunes, is it working okay? Are you able to sync, play music, use the Store and so forth without any trouble? Or are you getting other problems as well?

MacBook Air crashes/powers down each time it's turned on.

I replaced OS 10.6.8 on my MacBook Air with Lion 10.7 when Lion became available last week.
Last night I noticed some odd behavior -- extremely slow "genii" minimization of screens, duplications of key strokes, and other anomalies.
Then today, each time I tried to boot up, as soon as the wheel stopped spinning and the desktop became visible:
Several windows automatically displayed -- windows I was working on when I shutdown earlier.
The dialogue box appeared with buttons for | Restart | Sleep | Cancel | Shutdown |
Almost immediately, the power cut off and the screen went dark.
"Reopen windows when logging back in" was checked, so I unchecked it. As a result, the Air now powers down without displaying windows or the dialogue box. It goes black almost as soon as the Apple logo and login wheel disappear. (I'm connected to the Power Adapter, so there's no problem about power.)
I tried several remedies that have worked in the past with OS 10.6+, but they're not working now --
Opening in Safe Mode: the system powered down while I was logging in.
Using Command-R to invoke Disk Utility: The system crashed before I could start Disk Utility.
Resetting my Power Management using the Shift-Control-Option + Power. The air powered down as soon as I turned it on.
Finally, I tried reinstalling Snow Leopard using the Install stick that came with the Air, but the system died before I could initiate a new install. What's going on?
First clue: I tried the fix-errors command, fsck, in single-user mode. It logged into command line fine, bu tbefore I could invoke /sbin/ fsck -fy as usual, a line appeared
: / root# AppleMCP89TMSpowerGatingdown(0)done
and the system died. Did something actually "power-gate down"? What's that mean? (MCP89 is an Nvidia video chip.)
Second clue: When I disconnected the Air's Power Adapter because of a lightning storm outside, the Air rebooted and then died, rebooted and died, etc. (I'm typing these comments on my Pro, of course.) It only stopped when I shut the lid.
Thanks very much for your knowledge, expertise, and suggestions for how to restore my Air or if it's a hardware problem, how bad it might be.

I experienced the same. Then I reinstalled OSX Tiger, put in my Snow Leopard Disc and restored my system from Time Machine. But OS X Lion constantly makes my system crash, so after the last crash (twice a week it did) I reinstalled Snow Leopard and restored what I needed to use from my Time Machine backup manually. (including finding hidden files for my mails, adress book, calendar etc).
I look forward to Apple telling us whether OS X Lion can run on EVERY Mac with an Intel processor from 1.83 Core 2 Duo. I have 2 Gb RAM and everything worked really nice and fine until Lion crashed. And the problem seemed that it has also corrupted my backups in Time Machine when Lion tossed round my files.

Query on view - IS the querry executed each time view is referred?

I want to know whether query inside a view is executed each time when the view is being referred?
Also which on of below will be faster?
select
     a1.x,
     a1.y,
     b1.z
from
     TableA a1,
     TableB b1
where
     a1.keyName = 'F' || b1.someKey
OR
cretae view myView as
select
     'F' || someKey as anotherKey
from
     TableB
select
     a1.x,
     a1.y,
     b1.z
from
     TableA a1,
     myView b1
where
     a1.keyName = b1.anotherKey

A view is just a stored query, so it has to be executed each time it is referenced in a query.
The two queries should have identical performance. It might be vanishingly faster to parse the first query than the second, but I doubt you would be able to detect the difference.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

Hello, each time I register my appleID I get diverted to the German iTunes/iCoud...I bouth my iPhone in Germany but would like to get all the information in English...thanks!

Hello, each time I register my appleID I get diverted to the German iTunes/iCoud...I bouth my iPhone in Germany but would like to get all the information in English...thanks!

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Need render process to run each time form is opened.

I need my SQL queries to run each time the form is opened. This is whether the form is opened by the original user, an approver in workspace, or when someone opens a form (possibly rejected) via an attachment in e-mail. It appears that the processes for "Render" seem only to run when the form is originally opened by the end user. Can anyone help in explaining how to get the form to run the render processes (and other processes) each time the form is opened, no matter how it is opened?
Thanks in advance.
Joseph Doggie.

For those who get here from a Google search, I think one has to make a WSDL for the process. This is a complicated topic, however.
Does anyone have any other ideas?

Installed ScanSnap and now receive a request to change my harddrive each time I open a pdf.

I recently installed a ScanSnap and it changed my Adobe Acrobat 8 Professional to the point where each time I open this program or even a pdf file, I receive a User Account Control warning message asking whether the "Adobe Acrobat application program can make changes to the hard drive on this computer."
Any way to fix this so I can open up both program and pdfs without this warning?

If you updated your existing account then try logging out of it on the iPad by tapping on the id in Settings > iTunes & App Stores and then log back in and see if that 'refreshes' the account on the iPad.

Each time i try to download an email attachment, message says adobe pdf is unsupported ?

help..............each time i ty to download an email attachment, it tells me cannot do , adobe pdf is unsupported ..........how do i fix that................thank you

We know nothing about your system, your e-mail retrieval method, whether or not you actualyl even have Adobe Reader/ Acrobat installed and whatnot. This is not going anywhere without some more info...
Mylenium

How do I trigger an email marketing campaign each time a customer orders?

I want to trigger an email campaign to be sent X days after a customer places an order, each time he/she places an order. Specifically this would be a request for the customer to review the product(s) he/she purchased. I can't seem to find a way to trigger this based on the order date. Please help! Thanks!

Hi Liam,
Thanks for the response. I should clarify my initial question. There are two groups of purchasers that I would like to target with different email marketing campaigns: First time purchasers and, (ii) Repeat purchasers. Ideally the system would be able to distinguish between these two groups during the checkout process so that the correct email campaign could be triggered. I thought about basing it on whether the purchaser was logged in or not (where 'logged in = repeat purchaser'), but our site asks visitors to register very early in the process, so conceivably, a logged in user may very likely be a first time purchaser.
The more I think about it, the more it looks like I will need to manual email marketing list segmentation and management.
I sincerely appreciate any ideas you might have.
Thanks again!
Tim Rayl

Why does PDF file size increase each time I "save" tagging tasks?

Why does PDF file size increase each time I "save" tagging tasks?
Given:
1) I'm running Acrobat Pro 11.0.07 (this is most current version)
2) My file size starts at 750mb and ends up 15mb when finished tagging.
3) Only certain documents experience this increase, i.e., no visible pattern of document characteristics
4) PDF's are not full of images...in fact, mostly <H1> <H2> <H3> <P> <Figure> alt text, ect.
5) Occurs with text PDF's and/or fillable forms (again, does not happen to all documents...only some)
6) File increase occurs incrementally as tagging tasks are performed; i.e., each new save increases file size a few megabytes.
7) Occurs whether I "save" or "save as"
8) Difficult to optimize these files without corruption
9) I'm running Mac OS 10.9.4 (this is most current version)

Thank you so much for responding! I've been experimenting with the SAVE AS vs. SAVE for the past few days...and you are correct. It's funny because I've been tagging files for 2 years and never noticed this. Probably b/c I use both methods depending on the tagging tasks...some are more complicated than others and should not be overwritten. In those cases I SAVE AS new file.
I love this forum...thank you again!

Each time(whether in

Similar Messages

Maybe you are looking for