Easiest way to open CS 5.5 files in CS 5?

Does anyone happen to know if CS 5.5 users can save files back to CS 5? If so, how is that accomplished? Have their been any known issues?

Please post in the forum for the product you're asking about. Every application is different.
Bob

Similar Messages

  • What is the easiest way to open an application from Labview?

    I need to open an application from labview and depending on a user's selection, load one out of a group of files for the application that is opened. I need to know what is the best or easiest way to open an application and load a file that is used by the application based on a selection.

    Here is the response that I got from Cognex when I asked them about how to do this. Do you understand what they are talking about?
    In order to do something like this you will probably want to look into the Display Control/SDK for In-Sight. The Display Control gets installed along with In-Sight Explorer and includes a control that can be used in an environment like Labview to communicate with In-Sight sensors while the SDK is an enhanced version of the Display Control that gives you more control and functionality. I am not very familiar with the Labview environment so I will give some code snippets in VB.Net and hopefully you can adjust them as necessary. Specifically I see 3 possible avenues to do this:
     1) Using the Display Control you have access to many of the dialog boxes that are used in In-Sight Explorer including the Load Job dialog box. You can spawn this dialog box through a line of code similar to cvsInSightDisplay1.Edit.OpenJob.Execute(). I am not certain if the Labview environment will be able to spawn and display this dialog though. 2) With the addition of the SDK (additional purchase) you can directly access sensor properties including the job. There is a method called LoadJobFile to load jobs from on the sensor and LoadJobFileLocally to load jobs from the host machine. A typical line of code might be cvsInSightDisplay1.InSight.File.LoadJobFile("myjob1.job").3) If Labview cannot handle the dialogs and the SDK is not an option for you then you may still be able to do this using Native Mode commands. Native Mode commands are sent through a socket on the telnet port (typically port 23). Keep in mind that you will need to handle the username/password prompt and response when you first open the socket before issuing any Native Mode commands. The command to load a job file from the sensor would be the Load File command which would be a string similar to "LF myjob1.job". The Native Mode commands are documented in the In-Sight Explorer help file. 

  • I have a mid year 2007 24 inch iMac and will be purchasing a new 27 inch Retina iMac, what is the easiest way to transfer the data and files from my old machine to the new one?

    I have a mid year 2007 24 inch iMac and will be purchasing a new 27 inch Retina iMac, what is the easiest way to transfer the data and files from my old machine to the new one?

    Following up on this thread,
    I have a new iMac on the way and my current is from 2008, never had a problem but I am sure there are internal issues that I would prefer not to transfer.
    I have no issues other then the slowness in certain programs and that is the main reason to buy a new one.
    Programs like numbers and pages seem to take a longer time to open after I update to Yosemite.
    I only use 272GB of 500 GB, my memory is 4GB and I am upgrading to 8Gb and bought the 4.0 processor.
    Question:
    Is there a way to manually transfer items or would that be a waste of time in that if there are issues they could be anywhere and would transfer anyway?

  • Okay so I'm trying to download Adobe Flash Pro. I've gone to creative cloud and downloaded "Flash Professional CC and Mobile Device Packaging (2014)" and I have no idea what to do afterwords... There's no way to open or run the file. And to be honest, I'm

    Okay so I'm trying to download Adobe Flash Pro. I've gone to creative cloud and downloaded "Flash Professional CC and Mobile Device Packaging (2014)" and I have no idea what to do afterwards... There's no way to open or run the file. And to be honest, I'm not even sure if it's the right download... Help!

    I'm using PC with Windows 8.1. I got onto the Creative Cloud and downloaded "Flash Professional CC and Mobile Device Packaging (2014)". <--- That would be the file. I can't open or run it from CC and I couldn't find a file in my computer either.
    I've also found direct downloads for the trial version and hit the set-up button, it loads up, and then nothing happens.

  • Easiest way to mount a bin/cue file

    Hi,
    What's the easiest way to mount a bin/cue file in OS X?
    (without buying Toast Titanium from Roxio).
    And: Yes, I've tried using the Disk Utility.

    Ended up buying Toast Titanium 10.

  • Is there a way to open an existing opar file to just explore the same

    Is there a way to open a OPAR file and explore the metadata xml files in them. Does any utility in the EMPDK allow us to do the same?

    You can use unzip to extract files from an opar file.
    Ex:
    unzip <opar file>
    Regards,
    - Loc

  • Best Short and easiest way to open ps ( PostScript) In Linux ?

    Can anybody write me stepwise the best way to open postscript files in Linux.What should we install at Linux to open postscript files easily? Which files we are in need to install to open the ps files in Linux Operating System ?
    I am new to Linux ! Please also tell me same for pdf files!
    Thanks in advance

    And as for working with .ps files, the best way I've found to play with them are to use `ps2pdf` to convert them into a PDF and then open them with xpdf or GhostView.
    To see if you have these installed, try a `man ps2pdf` from the console, and look for KGhostView under the "Graphics" section of the RedHat (or similar "Start"-like) menu.

  • What is the easiest way to read fixed width ascii files?

    There does not seem to be an easy way to read fixed with ascii files in labview.  CSV files and other delimited files are easy, but I cannot think of a simple way to read data from a fixed width ascii file.

    jgkempen wrote:
    There does not seem to be an easy way to read fixed with ascii files in labview. 
    Reading a file does not depend on its contents. Unless the file is gigantic, you can just read it as one big string and parse it later, especiall if you want the entire contents of the file.
     If you only need a subset, you can calculate the offsets and sizes as multiples of your record size. That's the beauty of fixed size records.
    It is typically not efficient to read a file in a loop, small portions at a time, so I would not recommend that except in some very specific situations.
    Could you be a bit more specific on what exactly you need to do? Is your problem with reading or with parsing the fixed sized records? Could you attach a sample file and some description on what you need to read from it.
    Message Edited by altenbach on 09-05-2007 07:50 PM
    LabVIEW Champion . Do more with less code and in less time .

  • Is there any way to open an iMovie HD file with iMovie 4?

    Subject said it all. My daughter did her iMovie homework on our home computer. When she took the iMovie HD file to school it wouldn't open with their older version of iMovie.
    Any suggestions?
    Thanks,
    lw

    Hi Lanny
    install iM04 on your home computer :-/ (you can run both apps on one machine, but I recommend to install a second account for your daughter…)
    because iM05 has a totally different system to handle the clips ("non-distructive editing") plus a different file-system (.pkg instead of files+folders) there's no way from 5>>4
    (except, you export the project as a .dv and import that into the other app… but you loose the whole projects info as clips, transitions etc,)
    no, 5+5, 4+4, or 4+5… you can import iM4 projects into iM5… once, single shot only
    besides: great, your kids do such projects!! over here in Germany, we still use chalk and blackboards…

  • Is there a way to open old Excel 2004 files in Excel 2011?

    I recently bought a new MacBook Pro running Mountain Lion, and installed the latest version of Office 2011 for Mac. THEN I discovered that some of my older Excel workbooks, created on my ancient PowerBook G4 back in 2007, WON'T OPEN. I get a message saying that there is an error, and then Excel crashes. I really need to get access to this workbook on my new computer! It opens just fine in older versions of Excel, no corruption issues at all. It's just when I try to open it with my new laptop and Excel 2011. Does anybody out there have a workaround for me? I have loads of data in this spreadsheet and now no way to access it! Help!

    Make sure Office 2011 is fully updated. It shouldn't have a problem opening those documents.
    When I open a 97 - 2004 workbook, it states that it needs to be converted. That may be what is crashing on your copy of Office.
    Have you tried creating a new account and see if you can open them there.

  • Easiest way to write XMP data or files into a PDF file

    Hi,
    I wrote a little Adobe Air application, which is intended to generate XMP files for being imported into PDF files. Now I'm searching for the most efficient solution to import these XMP files. I'd be happy if I could select a PDF file from my Adobe Air application and write the metadata into the file, but I didn't find any library to this. Another option is something like a hotfolder. I try to avoid to import these files one by one. Could someone please give me a hint?
    I'd be very glad!
    Thank you beforehand!
    Stefan

    Hi,
    Thanks for your suggestion.
    My experience is more in Postgresql, sql server and ms access. So I can handle sql command better than java.
    According to your suggestion, I come out following design.
    Design:
    1. Use SQL Developer to developer a copy stored procedure.
    - The store procedure will copy ONE row of main data and data in related data table.
    - use database link to access remote database.
    - handle transaction and return error message if got error.
    - update data if the data already copied into destination database.
    2. A java program perform following tasks:
    a. Use jdbc install the stored procedure in #1 into database by "CREATE OR REPLACE FUNCTION ..."
    b. load copy data list from a file.
    c. a loop to call installed stored procedure. Pass one main row per time into stored procedure.
    d. print each main row copy result to stdout in the loop and stop if error happened.
    So, I just need to pass the java program to operator.
    Please tell me if you have any better idea or easier way to implement. Maybe, another possible solution is use shell script to execute sql command in sqlplus. :)
    Thanks,
    Regards,
    Hing Cheow Yong

  • Easiest way to find and remove duplicate files?

    My wife is a photographer and she's terrible at file management. Consequently she has duplicate versions of images stashed all over her almost full hard drive. What is the easiest waty to find duplicates of files so that I can get rid of them? Any freeware out there that does something like that? This would be for her Intel-based macbook pro running Tiger.

    Having spent several hours a few days ago organizing files, I was intrigued by your question.
    I found Singular which is appears to be freeware, for at least the time being. There's a link on the registration page that will register the application for you — I assume Singular has to be running for that to work, but that's just a guess.
    http://www.emeraldion.it/software/macosx/singular.html
    After you run Singular and drop files/folders on it, you can double click a duplicate entry and both versions are displayed.
    Good luck!

  • Any way to open an FCP5 project file in FCP4.5?????????

    Hi, I took the classes and have the lessons from the dvd in the certified training books but they are all in FCP5 and my work still has 4.5. Any way to get them to open in 4.5 without upgrading so I can practice? here's my email if you rather talk to me there: [email protected] Thanks!

    done it often. very easy to do.
    pictorial guide by the talented Nick Meyers courtesy Ken Stone's excellent website here:
    http://www.kenstone.net/fcphomepage/xml_export_FCP_5_to4.html

  • Any way to open and edit .MOD files on iMac?

    I am brand new to iMac, after wasting too many years on Windows. I have a Hard Disk camcorder that I uploaded from to my old PC. The movies are in the .MOD extension. I cannot seem to find a program to open and edit them on my new Mac. I used PowerDirector on my old PC, but that program doesn't seem to have a Mac version. Will iMovie be able to handle these files? I have quite a few home movies in this format, and I don't want to lose them! Thanks for your help!

    You can use a program called MPEG Streamclip to convert your MOD files to MP4s, which can be imported by iMovie. Also, you can change the mod file extensions to mpg which allows you to view the files with Quicktime (although, at least in my experience, they still need to be converted with MPEG Streamclip to be recognized by iMovie 08).

  • Easiest way to open a text alert on the home sceen...

    As im fairly new to my E71 this might be a silly question but when i get a text alert on my home screen is there a button (or a way) i can open it without having to scroll to it first?
    I know if i hold the left softkey down it will read it but i would rather open it.
    Thanks.
    Dave.

    Hi dave_bass5
    Other than pressing centre of "NaviKey" which is flashing? 
    Happy to have helped forum in a small way with a Support Ratio = 37.0
    Attachments:
    NaviKey.jpg ‏36 KB

Maybe you are looking for