ECC6 CUUC and Oracle 11 migration

Hi experts!
I would like to know if you experienced already a SAP ECC6 / EHP4 Upgrade combined with Unicode Conversion (so CUUC) coupled with an Oracle database migration from 10.2 to 11.2 while doing the Unicode db import (so a heterogeneous os/db migration at this stage i.e. Oracle 10.2 db export parallelized with Oracle 11.2 db import).
Is the CUUC coupled with Oracle 11 migration certified by SAP?
For information, the source system is 4.6c.
Thanks for your feedback.
Chris

Hi, thanks for your answer.
Yes, SAP ERP6 works fine with Oracle 10.2.
Our customer target is Oracle 11 in our case.
I understood from your message than upgrading to Oracle 11 can be done while doing the Unicode Conversion.
Do you know if this procedure is certified (or agreed) by SAP when done during the CUUC procedure?
I guess it makes sense but wanted to get the confirmation as I did not find any notes or guides relating the CUUC process AND the opportunity to do the upgrade to Oracle 11...
Thanks for your highlight.
Chris

Similar Messages

Problem with foreign and primary keys migration from SQL Server to Oracle

Hi folks, i'm using SQL Developer to migrate from a SQL Server database to Oracle and i'm stuck with a couple issues:
The worst of them so far is the fact that i can't migrate any of the PKs and FKs. After successfully capturing the SQL Server DB model and converting it to Oracle, when the tool generates the scripts, all ALTER TABLE queries that add the PKs and FKs have their target columns duplicated.
for example: when i'm trying to migrate a simple table that contains an Id (PK) and Name columns, the tool generates the following scripts:
PROMPT Creating Table TestTable...
CREATE TABLE TestTable (
Id NUMBER(10,0) NOT NULL,
Name VARCHAR2 NOT NULL
PROMPT Creating Primary Key Constraint PK_TestTable on table TestTable ...
ALTER TABLE TestTable
ADD CONSTRAINT PK_TestTable PRIMARY KEY
Id,
Id
ENABLE
As for the FKs, the tool duplicates the columns as well:
ALTER TABLE SomeTable
ADD CONSTRAINT FK_SomeTable_SomeTable2 FOREIGN KEY
SomeTable2Id,
SomeTable2Id
REFERENCES SomeTable2
Id,
Id
ENABLE
Does anyone have a clue on how to solve these issues? I'd be greatly thankful for any answers!

Hi Fernando,
I was unable to replicate this issue. My primary / foreign keys where defined using unique columns.
PROMPT Creating Primary Key Constraint PK_Suppliers on table Suppliers ...
ALTER TABLE Suppliers
ADD CONSTRAINT PK_Suppliers PRIMARY KEY
SupplierID
ENABLE
I tried a few things like
capturing twice and renaming both models the same
renaming the converted models
but with no luck.
I think this issue is occuring either at the capture or convert phase.
1) Are you performing the capture online or offline?
2) Can you provide a the entire DDL for one of these tables and its indexes to see if I can replicate?
3) Did the capture or convert fail or have to be redone at any stage ?
I all else fails I would attempt a capture and convert again using a brand new repository (create a new schema in Oracle and associate the migration repository with it).
Regards,
Dermot
SQL Developer Team
Edited by: Dermot ONeill on Oct 22, 2009 12:18 PM

Regarding Doubt of oracle upgrade and oracle migration

Hello,
What is the diffrence between oracle upgrade and oracle migration, duirng any one of this is oracle going to touch oracle database and its data?
Regards,
V.Singh

Singh wrote:
Oracle migration means most likely from non-oracle database to migrate to oracle DB or lower hardware platform to higher/advance hardware platformI would say so. Note Oracle was also confused about word "+migrate+" since it was used till 9i to open the database in a special mode to upgrade the database itself. Nowadays, on 10g+, the command became "+upgrade+".
In oracle upgrade we are updating oracle's new software version (9i to 10g) or patchset (102.0.2 to 102.0.4), once software is updated we giving command statup upgrade , during this phase some scripts are updating data so i belive it is updating oracle realted views,data dictionary,functions,triggers etc etc , instead of touching oracle data.Yes, upgrade script modify Oracle data and objects dictionary, but do not modify user's data and objects (if we expect a recompile of invalide objects as recommanded by the latest step of an upgrade).
Nicolas.

Migrating single instance SAP and Oracle 11.2.0.1 database to Oracle RAC

We have a single instance SAP Netweaver environment on Oracle 11.2.0.1 database and want to migrate to Oracle 11.2.0.1 RAC and ASM. The documents are for 11.2.0.2 and later but we want a way to:
1. Migrate single instance SAP and Oracle 11.2.0.1 instance to ASM
2. Configure the environment as four node Oracle 11.2.0.1 cluster
Thus far, I have:
1. Installed clusterware 11.2.0.1
2. Installed four ASM instances
My questions:
1. We want to migrate the single instance database to same server and extend to four node cluster and ASM
However, current SID for SAP and Oracle must remain the same. The problem I have is that the target database name needs to be same as source on same physical host.
2. How would I use RMAN to migrate the single instance database to ASM for 11.2.0.1?
3. How would I use rconfig after this step?

875554 wrote:
1- We have single instance Oracle 11.2.0.1 database using file based datafiles, archivelogs, controlfiles, etc on single RHEL5 Linux host
2- We have four available Oracle 11.2.0.1 ASM instances on four RHEL5 Linux hosts
3- We have installed four node Oracle 11.2.0.1 clusterware on the above nodesAnd what is the shared storage? For RAC, all shared storage devices for the cluster need to be available and usable by all ASM instances in that cluster.
Issue- we have RAC 11.2 clusterware listener using SCAN and listeners for all four clusterware nodes.
When we try to run the following RMAN command to migrate the single instance Oracle 11.2.0.1 datafiles it fails:The failure says: "+RMAN-10038: database session for channel ORA_DISK_1 terminated unexpectedly+". And this in itself does not tell you what the actual problem encountered is.
4- How to register the single instance with all four ASM instances and network services to resolve the above issue?Register what instance? ASM does not need databases or instances to be registered. It is a storage management layer. The cluster (grid infrastructure) layer is the one that deals with the registration (and management) of the various services and resources on that grid (e.g. ASM instances, database instances, SCAN and VIP, Listener services, etc).
5- Do we need to first run rconfig utility against single Oracle 11.2.0.1 instance to register with clusterware services BEFORE using RMAN to perform the datafile migration to ASM?Never used rconfig. See Support Note +RCONFIG : Frequently Asked Questions [ID 387046.1]+ for details.

Migration of SAP Business Objects BI Platform 4.1 from Windows(OS), SQL Server(DB) to AIX(OS) and Oracle(DB).

Dear All,
I have SAP Business Objects BI Platform 4.1 running on window servers and sql server database. We want to migrate this to AIX and oracle.
Can you please share what should be the best approach to carry on this migration?
Regards,
Asleh

Hi Mohammed,
Regarding your Query below is the suggestion:
Step I: Preparing for moving BOBJ application from Windows to AIX
There are some tasks that you need to perform:
To configure the existing deployment
Perform inventory and cleanup, to ensure that only the required content is moved.
Run the Repository Diagnostic Tool to detect any inconsistencies between the File Repository and the CMS repository. The upgrade management tool will not run successfully if there are inconsistencies between the File Repository and the CMS repository.
Identify any content that the upgrade management tool can't upgrade, along with the process required to upgrade that content. There is some content like Voyager Workspaces or Desktop Intelligence documents that require manual intervention before running the upgrade management tool.
Back up existing repositories, including the system database and the Input and Output File Repository Servers.
Back up custom web applications, HTML pages, and scripts in your existing deployment.
To configure the planned BI 4.x deployment
Setup and configure the Middleware and ODBC connections.
Ensure that your machines meet the deployment system's requirements, you can find information about the supported platforms in the Platform Availability Matrix (PAM) http://service.sap.com/support -> Help and Support -> SAP BusinessObjects Support -> Documentation -> Supported Platform s/PARs -> SAP BusinessObjects BI 4.x
Step II:
You can use database backup & FRS backup (Offline) in new environment (AIX) to deploy BOBJ 4.x Version
Take the help of DBA to move CMS & AUDIT database backup from SQL Server (Windows) to Oracle (AIX)
Test the Universe,reports, Check the rights
Step III:
If you are configured any SSO then make sure that same configuration is deployed in new environment (AIX).
Test the user SSO in new environment (AIX).
Or
You can also use Promotion manager to move the contenet from Windows (Business Objects Application) to UNIX (Business Objects Application)
Only prerequisite is Business Objects Application version should be same.
You can copy content only 50 Object at a time in One Job
FRS Offline backup is required.
Necessary files regarding custom web applications, HTML pages, and scripts in your existing deployment.
Please refer the below KBA for more details
BOBJ Deployment Link:
http://wiki.scn.sap.com/wiki/display/BOBJ/Application+Server
BIP on Linux with Tomcat and Sybase ASE Pattern Book
http://wiki.scn.sap.com/wiki/display/BOBJ/BIP+on+Linux+with+Tomcat+and+Sybase+ASE+Pattern+Book
Installing SAP BI 4.1 SP01 on Red Hat Enterprise Linux 6.x Step-by-step
http://scn.sap.com/community/bi-platform/blog/2013/11/06/installing-sap-bi-41-sp01-on-red-hat-enterprise-linux-6x-step-by-step
Promotion Manager KBA:
http://wiki.scn.sap.com/wiki/display/BOBJ/BI4+Upgrade+and+Promotion+Management+KBAs
Hope this will help!!!!
Thanks,
Daya

H/W & Data migration form AS 400/DB2 V5 R4 to Unix/Linux and Oracle

We are considering migration of huge data(in Terabytes) from AS 400/DB2 V5 R4 to Unix/Linux and Oracle.
We are changing operating system and data base also..Please advise if R98403 can be used to move data in terabytes.
I understand Oracle work bench does not support V5 R4.
I would like to know pointers on possible tools and approach for the migration.
Thanks
Las

Hi,
May I know the reason for this huge change? As most of the current setups of E1 are on AS00 only. Then also if you are planning to migrate your hardware and data from DB2/OS400 to Orcle and Unix/Linux you can consider below options for data migration:
1) R98403 and R98403A are best approach for this type of migration it may consule some extra time but accurate..! As no other tools like Oracle Workbench can
provide 100% accuracy.
2) Archive data size if possible with the help of BA team and work on some purging this will help you to great level.
3) If you decide to go live on new setup please consider going live module wise as a specific module data can be moved fast, and if BA team can specify some specific tables only getting hit for module trasection they can develop TC reports for specific data to be migrated and can save your time instead of copying entire data set again at go live.
Good Luck..!
Thanks,
Manoj Kathare

Entity Framework - Code First - Migration - How to access SQL Server and Oracle using the same context?

Hello,
I use Entity Framework code first approach.
My project is working fine with SQL Server. But, I want to access Oracle too. I want to switch SQL Server and Oracle in run time.
I am able to access Oracle using "Oracle.ManagedDataAccess.EntityFramework.dl" in a new project.
But, Is this possible to access SQL Server and Oracle in the same project.
Thanks,
Murugan

This should be possible with a Code-First workflow. In Code-First the database mapping layer is generated at runtime.
David
David http://blogs.msdn.com/b/dbrowne/

SQL migration scripts for MS SQL and Oracle when leaving Pointbase

We have created a project that has some data in pointbase that is Portal related
and need to migrate that information to MS SQL. Has anyone written or know of
migration scripts that would move the data? Thanks in advance.
Sincerely,
Eric Ballou

Here is a progression of the steps I'm taking in picture:
Start
http://img136.imageshack.us/my.php?image=oracle1ry9.jpg
http://img504.imageshack.us/my.php?image=oracle2xt5.jpg
http://img401.imageshack.us/my.php?image=oracle3id0.jpg
http://img185.imageshack.us/my.php?image=oracle4pp7.jpg
http://img76.imageshack.us/my.php?image=oracle5vi1.jpg
End
http://img73.imageshack.us/my.php?image=oracle6jl5.jpg
Message was edited by:
Cybercat

Proxy User - Forms 11.1.2 and Oracle Database (version 10.1.0.5) ??

Hi,
we are migrating from Forms 6i to 11.1.2. Our database version is very old (Enterprise Edition, version 10.1.0.5) because this is the latest version of the DB that Forms 6i runs, and we will migrating to 11g in phases. So 6i and 11g will co-exists for a while (accesing the same DB).
I am trying to use proxy users feature to login to database.
So I did this:
- I created a user PROXY_USR to be the proxy user:
SQL> create user PROXY_USR identified by PROXY_PASW;*
- I grant create session for the user:
SQL> grant create session to PROXY_USR;*
- I changed the application users (eg APPUSER01), to connect via proxy user:
SQL> alter user APPUSER01 grant connect through PROXY_USR;*
The comand in Forms module to login is:
+LOGON('PROXY_USR[APPUSER01]','PROXY_PASW@DB01');+*
The logon built is being performed and the connection being made, without erros.
But when I verify in what user the application is logged on, the result is not
what was expected:
I did the follwing PL/SQL inside Form module:
begin*
select user into v_user_DB from dual;*
MESSAGE('User Connected: '||v_user_DB,ACKNOWLEDGE);*
exception*
when others then*
MESSAGE('ERR: '||SQLERRM,ACKNOWLEDGE);*
end;*
The result from this select, is PROXY_USR and not APPUSER01 (that would be the correct):
*>>Result: "User Connected: PROXY_USR"*
Some more commands that were also performed inside Forms module:
begin+
select sys_context('userenv','current_user') v_current_usr from dual+
MESSAGE('Current User: '||v_current_usr,ACKNOWLEDGE);+
exception+
when others then+
MESSAGE('ERR: '||SQLERRM,ACKNOWLEDGE);+
*>>Result: "User Connected: PROXY_USR"*
begin+
select sys_context('userenv','proxy_user') v_proxy_user from dual;+
MESSAGE('Current User: '||v_proxy_user,ACKNOWLEDGE);+
exception+
when others then+
MESSAGE('ERR: '||SQLERRM,ACKNOWLEDGE);+
*>>Result: "Proxy User: "*
OBS: when a connect via SQL*Plus, in a 11g database (Express), and run the commands above, the results are OK. The
APPUSER01 is returned.
Any ideas ?? I will open a SR in Metalink, but I think they will first request a database upgrade,
which is not feasible for us at the moment ...
Thanks in Advance.
Franco

Unfortunately besides trying on a certified combination (maybe use the Developer Database VM and import the required schemas for trial) and going through the documentation at http://docs.oracle.com/cd/E24269_01/doc.11120/e24477/sso.htm I can't offer more. I don't have a 10gR1 database anymore and also I don't have OID to play with.
cheers

Urjent help !!!Error during running script root.sh for oracle 11g migration

Dear All,
My databse is Oracle 9.2.8.0 and i am migrating it into oracle 11g.
During installation of oracle 11g (with software only option) , it asked me to run the script root.sh in another terminal,
During running i got the below error.
What i should do now. shall i continue with the error...............
Kindly help ? It's urjent....
Script Output :
[root@cmssbigt dbhome_1]# ./root.sh
Running Oracle 11g root.sh script...
The following environment variables are set as:
ORACLE_OWNER= oracle
ORACLE_HOME= /oracle/product/11.2.0/dbhome_1
Enter the full pathname of the local bin directory: [usr/local/bin]:
The file "dbhome" already exists in /usr/local/bin. Overwrite it? (y/n)
[n]: y
Copying dbhome to /usr/local/bin ...
The file "oraenv" already exists in /usr/local/bin. Overwrite it? (y/n)
[n]: y
Copying oraenv to /usr/local/bin ...
The file "coraenv" already exists in /usr/local/bin. Overwrite it? (y/n)
[n]: y
Copying coraenv to /usr/local/bin ...
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root.sh script.
Now product-specific root actions will be performed.
Finished product-specific root actions.
/bin/mkdir: cannot create directory `/opt/ORCLfmap': No such file or directory
/bin/mkdir: cannot create directory `/opt/ORCLfmap/prot1_32': No such file or directory
/bin/mkdir: cannot create directory `/opt/ORCLfmap/prot1_32/bin': No such file or directory
/bin/mkdir: cannot create directory `/opt/ORCLfmap/prot1_32/etc': No such file or directory
/bin/mkdir: cannot create directory `/opt/ORCLfmap/prot1_32/log': No such file or directory
/bin/cp: cannot create regular file `/opt/ORCLfmap/prot1_32/bin': No such file or directory
/bin/cp: cannot create regular file `/opt/ORCLfmap/prot1_32/bin': No such file or directory
/bin/chmod: cannot access `/opt/ORCLfmap/prot1_32/bin/fmputl': No such file or directory
/bin/chmod: cannot access `/opt/ORCLfmap/prot1_32/bin/fmputlhp': No such file or directory
/bin/cp: cannot create regular file `/opt/ORCLfmap/prot1_32/etc': No such file or directory
[root@cmssbigt dbhome_1]#
You have new mail in /var/spool/mail/root

Biswa wrote:
If u have any problem with urjent word then mention in the forum during regestration that , only who having 5 to 6 days of time can only post. Because the issues will be solved within this time interval.
Ok ..........No. It is NOT okay to claim that everyone else here that posted problems need to be ignored and your problem be given priority attention because you deem it to be urgent. You have not a single valid excuse for claiming your posting is more important on OTN that other postings.
It is not acceptable. Learn some basic etiquette please when posting online!

Problems with Sybase 12 to Oracle 10g migration

Hi,
I'm using SQL Developer to test a migration between Sybase and Oracle and it doesn't work (both online and offline)
I've create a dedicated user account and connection, with the roles and privileges required (as seen in http://download.oracle.com/docs/cd/B32485_01/doc/appdev.110/b31695/migration.htm#i1005739)
I've created the migration repository without any problems (using the above user account).
QUICK MIGRATION
- select the source Sybase connection: OK
- select the target Oracle connection: OK
- select the referential: OK
- verify privileges before migration: OK
- migrate tables only and click Next
## window closes and nothing happens ## - nothing on Captured Model pane
CAPTURE SOURCE SYBASE DATABASE
- right click on the Sybase connection in the Connections pane
- choose Capture Sybase
## window closes and nothing happens ## - nothing on Captured Model pane
OFFLINE CAPTURE
- create database capture scripts: OK
- launch the database scripts (SYB12_OFFLINE_CAPTURE.BAT): OK
- load database capture script output (sybase12.ocp)
## window closes and nothing happens ## - nothing on Captured Model pane
I can't find any relevant logs or trace from the application.
I even tried to use the capture file sybasemigration.zip from the "Migrating a Sybase Database to Oracle Database 11g" web page (http://www.oracle.com/technology/obe/hol08/sqldev_migration/sybase/migrate_sybase_otn.htm), but the result was the same.
Does anyone encountered the same problems? Does someone knows where are the logs (if any)?
Thanks in advance.
Regards,
Pedro

Hi Pedro,
What version of SQL Developer are you using?
Can you browse your Sybase connection in SQL Developer, to see its tables for example?
If not, then you may need to point SQL Developer to your JTDS 1.2 driver again.
Are you capturing a non system database ? SQL Developer wont migration master or tempdb ...
Can you try running SQL Developer from the command line and watch the command line for any errors during the capture.
\sqldeveloper\bin\sqldeveloper.exe
Regards,
Dermot
SQL Developer Team

Oracle Database Migration Verifier - Can it be used for diff table structur

Hello,
We have re-engineered the existing sybase tables to a new structure in Oracle for few of the tables.For example a table in sybase is normalized to two tables in oracle.In these cases can the "Oracle Database Migration Verifier" be mapped such that the columns in one table in sybase be mapped to two table is Oracle with their respective column names.
In a gist can the tool be used even if the structure is not the same in the source and targer databases.
Please let me know if you need more clarifications regarding my query.
Regards,
Ramanathan.K

not really. The DMV was a simple tool for verifiying that what you now had in Oracle was what you had in Sybase. It does not do what you are expecting.
B

Oracle Database Migration Assistant for Unicode (DMU) is now available!

Oracle Database Migration Assistant for Unicode (DMU) is a next-generation GUI migration tool to help you migrate your databases to the Unicode character set. It is free for customers with database support contracts. The DMU is built on the same GUI platform as SQL Developer and JDeveloper. It uses dedicated RDBMS functionality to scan and convert a database to AL32UTF8 (or to the deprecated UTF8, if needed for some reasons). For existing AL32UTF8 and UTF8 databases, it provides a validation mode to check if data is really encoded in UTF-8. Learn more about the tool on its OTN pages.
There is a new Database Migration Assistant for Unicode. We encourage you to post all questions related to the tool and to the database character set migration process in general to that forum.
Thanks,
The DMU Development Team

HI there!
7.6.03 ? Why do you use outdated software for your migration.
At least use 7.6.06 or 7.7.07 !
About the performance topic - well, you've to figure out what the database is waiting for.
Activate time measurement, activate the DBanalyzer with a short snapshot interval (say 120 or 60 seconds) and check what warnings you get.
Also you should use the parameter check to make sure that you don't run into any setup-induced bottlenecks.
Apart from these very basic prerequisites for the analysis of this issue, you may want to check
SAP Note 1464560 FAQ: R3load on MaxDB
Maybe you can use some of the performance features available in the current R3load versions.
regards,
Lars
p.s.
open a support message if you're not able to do the performance analysis yourself.

Oracle 10g migration to linux

Hi,
At present we are maintaining a J2EE application running on a UNIX Platform with the following environment configuration:
o Web Server (Apache 2.0.52)
o Application Server (WebLogic Server 9.0)
o Database Server (Oracle 9i)
The current requirement is to upgrade Oracle 9i on UNIX to Oracle 10g on Linux. Will there be any impact on
· Oracle developer applications (Forms/Reports) because of oracle upgrade?
· .net applications accessing oracle because of oracle upgrade?
· Java applications accessing oracle because of oracle upgrade?
And there are plans to use Oracle Warehouse Builder and Oracle Workflow Server. Are there any known issues with respect to the above applications during this migration?
Thanks,

Hi,
Upgrading on the same machine doesn't work well. Installing in a different machine
will work fine.
This can be done for apps also where you will be migrating the config alone.
Regards,
Nirmal

CachedRowSet problem in Weblogic 6.1 and Oracle thin driver 9.0.1

Has anyone used the CachedRowSet class successfully? (this classes are
new and from the JDBC extension pack)
I am experiencing "Not in a transaction" errors when executing
cachedrowset.populate(resultset), even though I'm inside a correct
ut.begin and ut.commit transaction.
Note I don't have these problems when I don't use the CachedRowSet
classes.
If I remove the setFetchSize(50) line, then I receive the ORA-01002:
fetch out of sequence error, which is discussed in another post on
this newsgroup.
I don't have any of these problems at all, if I use the Oracle Thin
Driver directly (i.e. not using Weblogic 6.1).
-H
Example of code:
stmt = getConnection().createStatement();
stmt.setFetchSize(50);
stmt.executeQuery("SELECT * FROM ASSET");
rs = stmt.getResultSet();
crs = new CachedRowSet();
crs.populate(rs);

Hi Arturo,
What kind of a problem do you have? Any stacktraces?
Regards,
Slava Imeshev
"Arturo Fernandez" <[email protected]> wrote in message
news:[email protected]..
Hi! I have a problem with CLOB column in Oracle 8.1.7. My enviroment
is:
Windows 2000, BEA WLS 6.1 and Oracle 8.1.7. I'm trying to use
'classes12.zip' provided by Oracle. I added 'classes12.zip' to
CLASSPATH after than 'weblogic.jar' in my startup server script, but
it fails when trying to retrieve a CLOB data from database. Script
includes:
setCLASSPATH=.\classes12_01.zip;.;.\lib\weblogic_sp.jar;.\lib\weblogic.jar;
>
But this driver and the code runs sucessfully with the same database
and weblogic 5.1. I'm interesting in use this driver and this code
because i'm trying to migrate two applications from WLS 5.1 to WLS 6.1
I cannot find a solution.
Can everybody help me, please? It's urgent for me...

ECC6 CUUC and Oracle 11 migration

Similar Messages

Maybe you are looking for