ECess and S&HEcess amount not updated in J1iin

Hi All,
I am chandra, we are using TAXINN procedure.Ecess and S & H Cess amount not reflect in Excise invoice J1iin, only Excise duty is reflected. I maintain pricing procedure conditon type for Ecess(JECS)
nad S&HEcess conditon type(JA1X). Up to billing document it showing Ecess 2% S&HEcess 1% after billing factory sales excise invoice(J1iin) not showing the values. Plz help me.
Thanks and regards
Chandra

Dear Friend,
Go to tax on goods movement -> India -> Basic settings -> determination of Excise duty and maintain the default conditions for taxes, in Taxinn or in Taxinj which ever procedure you are following - the data will flow to J1iin. Same way check the screen 600 and 400 in sapprogramj1iin in se80. Hope this will help you to solve your problem
regards,
Sudhir
Edited by: Sudhir Nair(India) on Nov 20, 2008 7:58 AM

Similar Messages

Excise Base amount not updated in J_1iexcdtl table -reg

Dear Gurus,
We have used SAP Ecc 5.0 Patch level 21. In patch level 20, SAP admit without delivery , can do commercial billing and excise billing in foreground. After batch update SAP not support excise invoice creation in foreground. It support only background. We have 2 senario. 1 is capex sales . ie. without material stock we have raise the comm.billing and excise billing. 2 is supplimentary billing. both the senario now getting effected because of no delivery. Asper SAP advise we have setting for background process excise invoice creation. Excise invoice created. but excise base amount not updated in j_1iexcdtl table. Using J_1I7_USEREXIT_CALC_EXC_BASE user exit we are trying to update the same. For single material it works fine. But more than one material for the first material's base amount is updated in all materials. for your reference i have mentioned the codding . SAP advise it is possible to update excise base amount. But not possible to do. pl.adivse if any correct or guide to solve it.
FUNCTION J_1I7_USEREXIT_CALC_EXC_BASE.
""Local Interface:
*" IMPORTING
*"     VALUE(EXCITM_BASE) TYPE KOMV-KAWRT
*"     VALUE(POSNR) TYPE VBRP-POSNR
*" EXPORTING
*"     VALUE(EXCITM_BASE) TYPE KOMV-KAWRT
*" TABLES
*"      KONV STRUCTURE KONV
*{   INSERT         RDSK925285                                        1
TABLES : KONV.
data :   W_INDEX LIKE SY-TABIX.
DATA :ITAB LIKE TABLE OF KONV WITH HEADER LINE.
DATA :ITAB1 LIKE TABLE OF KOmV WITH HEADER LINE.
ITAB1[] = KONV[].
DATA : BEGIN OF I_TAB OCCURS 0,
       KAWRT LIKE KONV-KAWRT,
       POSNR LIKE VBRP-POSNR,
       END OF I_TAB.
LOOP AT ITAB1.
READ TABLE ITAB1 WITH KEY KSCHL = 'JMOD' KPOSN = ITAB1-KPOSN.
IF SY-SUBRC EQ 0.
    EXCITM_BASE = ITAB1-KAWRT.
    POSNR = ITAB1-KPOSN.
ENDIF.
ENDLOOP.
*}   INSERT
ENDFUNCTION.
Thanks & Regards
R.Udayakumar

solved with the same user exit

Before image and after image is not updating correctly with 2LIS_04_P_ARBPL

Hello BW gurus
I am facing problem with the posting date extraction from the extractor 2lis_04_p_arbpl. I am getting incorrect before image and after image. Please let me know how to solve this problem.
Thanks and regards
kiran.

Hi,
It is difficult to check this in the Source System and there is no direct method. I can give you a workaround which we did analysed for some of delta datasources.
Steps to be followed sequentiall once the step is successful:
1. Create a Production order or something.. Note down the number.
2. Check the datasource whether you get the same Production Order as delta
3. Now do whatever confirmation etc . for the same Production Order
4. Check the datasource (RSA3) and see wat it extracts.. might be multiple records..
In that case just see the sequence of records.. and the changes each record has brought in.. hope this way we can simulate the delta datasource realtime..
And if you find the sequence or somthin is correct and in BW is not updating properly then it is our fault to dig and find out further.. If the issues is at the RSA3 itself, then u can raise an OSS Message as a Bug.
Hope it helps.
Regards,
Chathia.

Ecess and S & H Cess not reflect in Excise Registers(J1iin)

Hi All,
Ecess and S & H Cess not reflect in Excise Register J1iin, only Excise duty is reflected. I maintain the conditon type for Ecess--JECS. In my understanding no conditon record for S & H Education cess.
I copied Ecess condition type and maintain the S & H Education Cess Condtion type(JEC1). i checked all the settings its ok but in Jiin register not reflect Ecss and Secondary Education cess. Plz help me.
Thanks and regards
Chandra

hi,
Please do check the T-code u r using is wrong .
it is not J1IIN to view registers
it is J2I6
hope u are doing purchase cycle not sales cycle
regards,
sujit

I cleared the cache and my site does not update! What's the secret?

I cleared the cache and my site does not update! What's the secret? I created a second website and bought a domain name. You can get to the site by it's mac name or the purchased domain name. I linked the domain name and with my server and it works. The site comes up wither way. BUT, either way, I cannot get my changes to appear. I had realized that my links were not working because I had placed them within the header. So, I moved the links out of the header, republished, and now the new pages (with links in body of website) will not load. Here are the two ways to get to see the site. Both show the old way (links in header). What is up with me not being able to see the changes in either Firefox or Safari?
http://www.frankysoldiesbutgoodies.com/
http://web.mac.com/musbegin/iWeb/OldiesButGoodies/OldiesButGoodies.html
Thanks,
musicalbeginnings

hello mccormick.lee, please try downloading the full setup file for the current firefox version from https://www.mozilla.org/firefox/all/ and install it on top of your current installation.

Hello I would like to know how to stop my service by mistake and canceled an amount not want to pay or the product

hello I would like to know how to stop my service by mistake and canceled an amount not want to pay or the product

Hi Jimmy,
You may be able to cancel your membership following the processes outlined here: https://helpx.adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html
Else, you will need to contact our support for assistance with the process: Contact Customer Care
Be sure to sign into the Adobe ID associated with your membership
Hope that helps,
- Dave

HEcess is not updating in RG23 A and RG23 C for utilization amt.

Dear All
We have done utilization for the month of FEB-08.On chicking the registers entriesf or utilized amt.In PLA Registers BED,Ecess,HEcess are showing but in RG23A and RG23c Part II HEcess is not appearing showing. Please guide in this matter.
Thanks and regards
Nitin

Hi ,
https://www.sdn.sap.com/irj/sdn/wiki?path=/pages/viewpage.action&pageid=13160
check this sample program for 586

Edcess & Hcess amount not updated in Remittance challan document (Vendor)

Hi Gurus,
I am working on ECC 6.0. Should any body tell me how can i get the ed-cess & higher cess amount in remittance challan document? i have got the Basis TDS & surcharge remitted amount on remittance challan but not get the edcess & higher cess remitted amount? also this is not reflected the ed cess & h cess amount in vendor TDS certificate?
for this i have done the vendor invoice. during this i got the TDS amount by bifurcate. i also maintain seprate GL for TDS Deducion. then after i create remittance challan. but it couldnot shown me in the line item of ed-cess remitted.
Please help me to work out on this problem.
Warm Regards,
Dhananjay R.

Hai
1. If you have separate tax codes for Surcharges, J_1IEWT_SURC table
should be maintained, by setting the checkbox checked, for the company
code. Those tax codes should be available the J_1IEWTSURC table
(use SM30 to maintain these values)
2. If you have a combined tax code for surcharges, then the tax rates
should be maintained in J_1IEWT_SURC1 table.
Make sure that tax codes available in J_1IEWT_SURC1 table are not
available in J_1IEWTSURC table and vice-versa.
3. If you are using separate tax codes for Education cess, those tax
codes should be maintained in the J_1IEWTECESS table and 'X' should be
maintained for the company code in J_1IEWT_ECFLAG table.
4. If you are using combined tax codes for Education cess, tax rates
should be maintained in J_1IEWT_ECESS1 table.
Make sure that the tax codes available in J_1IEWT_ECESS1 table are not
maintained in J_1IEWTECESS table and vice-versa.
Refer (only refer) the solution part of the note 870991 and 853918
for details relating to table creation.
Make sure that in the table for surcharge you have only the tax types
relevant for surcharge AND DOES NOT CONTAIN TAX TYPES RELEVANT TO
BASIC TAX AND CESS ANDMake sure that in the table for ECESS you have only the tax types
relevant for ECESS AND DOES NOT CONTAIN TAX TYPES RELEVANT TO
BASIC TAX AND SURCHARGE
If you have configured secondary cess seperately,i.e a seperate tax
type and code for secondary cess,kindly make sure that you have
applied the steps and the code corrections given in the note 1097621.
Regards

Cash desk and payment lots documents not updating in DFKKOP table

Dear Experts,
I have noticed that my cash desk payments and payment lot documents are not getting updating in the DFKKOP table. I have identified that for this documents, the document class is updated with "1" which means "Document does not have FI-CA items".
But, the postings where shown in the FPL9 transactions and clearing is happening as per the settings and requirements.
So please update me, on what basis the system would determine the document class for the document types in contract accounting..
Your inputs on this issue will be really helpful for me.
Thanks
Aditya Viswanath

Hi Aditya,
In a simple word, whichever documents are posted with MAIN/SUB creates a new row in DFKKOP with document number in DFKKOP-OPBEL.
If a payment is posted as an open credit item, it should be there DFKKOP-OPBEL field and BETRW and BETRH will be populated with payment amount.
However if a payment is posted as a clearing document against a debt, system updates that row of DFKKOP where DFKKOP-OPBEL is the cleared document number (debt, mostly an invoice). Clearing document (DFKKOP-AUGBL) of that row is updated with the payment document number.
In either of the cases DFKKKO and DFKKOPK are updated and below are the reason.
DFKKKO - document header level information (as who created, at what time, origin key, reco key etc.)
DFKKOPK - (GL level information of the document)
For payment lot and payment document related information you can refer DFKKZK, DFKKZP and DFKKZPT tables.
Hope it clarifies your query.
Thanks, Bodhisattwa

Rebate amount not updating

Dear Gurus,
Greetings.
I am trying the Material Rebate process (0002) and I have done all the required configurations like activating at Sales Org., Billing doc. and CMR levels.
Now I created an Agreement and raised Sales Order, Delivery and Billing.
1. My rebate Cond Type BO02 is getting populated with the correct value and it is getting updated in the
Agreement in the 'Accruals' field but not in 'Max payable amount' field. What am I doing wrong?
2. After this when I am doing Partial settlement by clicking on 'Create Manual Accrual' icon and doing the required things like completing Credit Memo in VF01, the 'Accruals' field is getting reduced by the correct amount in the Agreement. But when I am going for the final settlement, by clicking on the 'Create Manual Rebate Payment' icon, it is giving greyed out fields of 'Amt to be Payed' and
'Max Amount' with 0.00 values, where I cannot enter any values. Why is this happening?
Kindly do give me the solution. I have some notes of rebate process from my class and I have gone through the forum search, but unfortunately could not find any useful details.
Appreciate your time and efforts.
Thanks and regards.
Venkat - Hyd

Hi Venkat,
I have taken an example to explain your scenario.Hope this will help you.
The rebate to the customer is based on certain volume of product within specified time. The process says, firstly create the material or customer rebate in VBO1.Say if we take a material rebate having agreement type BO02,the scale is based on quantity. In conditions under T code VBO1 put the scale quantity for eg 10 units, amount (total rebate/piece) 25 GBP for 1 unit and the accrual amount for eg 100 GBP which you think can be paid as the partial payment before the full settlement. Remember you canu2019t put the partial payment more than the accrual defined. Make a standard order OR, process it till the billing. Now go to VBOF (update billing document for rebates) and run/execute the report, the report updates the sales volume with the relevant billing documents as of now of the customer. After that go to VBO2 and click on summation/sales volume and see that the total sales volume being generated. Also you can see the verification level and the drop list which will show you the relevant billing documentsNow if you again change the accruals again or do the partial payment let say 100 GBP through VBO2 a credit memo request is generated which can be processed to credit note by removing the billing block through VA02 and than going to VF01 and generating the credit note. Now change the status to B for doing full settlement in VBO2 and than click the final settlement tab. The credit memo request will be generated automatically with item category B1N.Change the billing block status in VA02 and than take the reference of this request and create a credit memo through billing. We will see the account u201Csales bonusesu201D in the accounting document of final settlement credit note.
Thanks
Rishi Balani

Excise amount not updating while posting invoice

Dear SCN's,
I have done GRN and captured excise amount and later in invoice posting these captured excise values are not updating. Please help me out where the root cause might be, please share your views were might be the error. And also help me with information of excise tables updating while capturing excise invoice and posting excise invoice.
Regards,
Kumar

For Domestic & Imports Excisable Material Procurement at Excisable Manufacturing Plant
J_1IEXCHDR: Table for Excise header information.
J_1IEXCDTL: Table for Excise item information.
J_1IGRXREF: Table for Excise & Material document reference.
J_1IPART1: Table for Part I entry
J_1IPART2: Table for Part II entry.
For Domestic & Imports Excisable Material Procurement at Excisable Depot
J_1IEXCHDR: Table for Excise header information.
J_1IEXCDTL: Table for Excise item information.
J_1IRG23D : Table for Depot Register.

HT201317 Using icloud to back up photos and shared photostream, why not updating?

I've been manually backing up my camera roll on my windows 7 pc the old fashioned way (copying files through windows explorer) for some time, and have my pc as a whole backed up on a cloud product.
I have this week however learned about icloud and the ability to back up the shared streams I'm subscribed to. I therefore installed icloud control panel and watched my family's streams appear in My Pictures.
However, one shared stream did not transfer completely - there are 18 of my mum's pictures missing - and My Photo Stream has only transferred 70.
Know there's a 30 day limit so given that is the first backup, it may not back up all 1000 as the earlier ones are older than 30 days, but the selection making up to 70 aren't the most recent as showing on my iPhone, so its no that. I took a whole lot together last weekend, one is on there but not the rest (for example).
I can back up manually to get a complete set of my own photos but think I must be doing something wrong if it's missing some.
I did go out after backing up first time, did I interrupt it , which is why there are only 70? How do I restart it? - given that it didn't finish first backup.
Also, I got home tonight, and the ones I've taken today have not transferred over.
Is there something I'm supposed to do to trigger a backup? ( both to finish first back up, and to backup new ones too)
Given that I'm using icloud more as a way of getting my photos and shared streams onto my pc, rather than backing up in icloud (as I have my own cloud too), what settings should I have on my iPhone, and what settings on iTunes?
At the moment on iPhone In settings/icloud/storage & backup, I have icloud backup turned on.
In iTunes, on the summary page for my iPhone (when plugged in) under Backups, I have 'iCloud' option ticked. Rather than 'this computer', when I change to 'this computer', the icloud setting on my iPhone gets turned to 'off'. I did hit the 'back up now' under 'manually back up and restore' in case that triggered it, and its showing a back up date and time of last night when I did this - but My Photo Stream is still at 70 - not complete transfer, or new ones - and mum's 18 still missing.
Same page in iTunes, under 'Option' I have both 'sync over wifi' and 'manually manage music and videos' checked.
I'm sure I'm overlooking something simple, any ideas?
Thanks!

Right, they're slowly reappearing. And My Photo Stream is updating this time too.
So, is it signing in and out that did this? Is this what's supposed to happen?
I should have said, I was looking for a way to back shared streams as we all have each others streams on our iOS devices and its filling up our storage, so we want to start deleting from the beginning, but not til we've backed up.
However, if icloud works by constantly removing and rebacking up from what is on the device then, then this isn't the right solution for us, as it would remove the complete stream and back up a smaller stream after we've started deleting...
Did i do something wrong here, was this supposed to happen?
What should I have done?
How do I stop this happening again?? I'm clearly not using icloud control properly!

Sales Order Credit Account and Credit control area not updated

Hi,
I have a production issue. I have two sales orders created from Same Value contract, with same PO, same sold to party same payer. Both the orders created by same user at the same time.
First SO has credit control area and credit account is updated but the second order did not update with this information.
For first order, if I go to Environment -> Partner -> Display credit account, system taking to FD33 screen of the credit account.
For the second order, above menu path giving message "Cannot display credit limit as no credit management account is available"
Please let me know how fix the second order to rectify this issue.
Thanks,
Satish

Hi,
Goto OVAK T.Code.
Assign credit check to your second sales order type.
Assign the values from "A" to "D".Any value as per your need.
Save.
Regards,
Krishna.

BUDAT and TPARTDOCNO field is not updating in HRPAD25 table

Hi,
I am facing one weird issue where in HRPAD25 table field BUDAT and TPARTDOCNO is not updating for corresponding ADATNR of HRP1001 table.
Due to this when I am doing course follow -upi(marking attendance) system is throwing an error.
Kindly help ,why this is happening
Regards,
Sadaf

Hi Sadaf
Are you using the LSO transactions to book the person on the course ?
Please do not use TEM transactions i.e. PSV1, PVCT etc. for trainings.
Pl refer
Follow Up Course - Dump - ERP Human Capital Management - SCN Wiki
Regards
Chetan Bajaj

I bought a new mac with software installed and my username will not update from another account?

I recently bought an new power mac with Logic Pro and Final Cut Pro Installed.
When I updated to the new OS X operating system, they need to be updated as well. And will no longer work.
But it says it is on another account. Not sure what account. How do I find out what account they are on? How or can I do I move them into my other account?
The Power Mac is registered to the account I am logged in on.

Before buying a second-hand computer, you should have run Apple Diagnostics or the Apple Hardware Test, whichever is applicable.
The first thing to do after buying the computer is to erase the internal drive and install a clean copy of OS X. You—not the original owner—must do that. Changes made by Apple over the years have made this seemingly straightforward task very complex.
How you go about it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
It's unsafe, and may be unlawful, to use a computer with software installed by a previous owner.
1. If you don't own another Mac
a. If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller—not from eBay or anything of the kind. If the machine is very old and has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
b. If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for a MacBook Air. You should have received the media from the original owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To start up from an optical disc or a flash drive, insert it, then restart the computer and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
c. If the machine shipped with OS X 10.7 or later, you don't need media. It should start up in Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
d. Some 2010-2011 models shipped with OS X 10.6 and received a firmware update after 10.7 was released, enabling them to use Internet Recovery. If you have one of those models, you can't reinstall 10.6 even from the original media, and Internet Recovery will not work either without the original owner's Apple ID. In that case, contact Apple Support, or take the machine to an Apple Store or another authorized service provider to have the OS installed.
2. If you do own another Mac
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to prepare a USB device, then start up the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can start from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
3. Partition and install OS X
a. If you see a lock screen when trying to start up from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another service provider to be unlocked. You may be asked for proof of ownership.
b. Launch Disk Utility and select the icon of the internal drive—not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
c. An unusual problem may arise if all the following conditions apply:
          OS X 10.7 or later was installed by the previous owner
          The startup volume was encrypted with FileVault
          You're booted in Recovery mode (that is, not from a 10.6 installation disc)
In that case, you won't be able to unlock the volume or partition the drive without the FileVault password. Ask for guidance or see this discussion.
d. After partitioning, quit Disk Utility and run the OS X Installer. If you're installing a version of OS X acquired from the App Store, you will need the Apple ID and password that you used. When the installation is done, the system will automatically restart into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
e. Run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the original owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed—you have to repurchase them.
4. Other issues
a. If the original owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're irrevocably linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
b. If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
c. When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a lifetime limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an iCloud account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information. The setup limit doesn't apply to Apple ID accounts used for other services, such as the iTunes and Mac App Stores, or iMessage. You can create as many of those accounts as you like.

ECess and S&HEcess amount not updated in J1iin

Similar Messages

Maybe you are looking for