Eclipse: Showing Error When It Shouldn't Be

I think. Just imported a bunch of legacy code. Getting an error on a member definition line like this:
private com.package.MyClass mMyClass;
The error says "com.package" cannot be resolved. However, when I click on quickfix, I get only one option: "Change to 'com.package.MyClass'". If I double-click the option, nothing happens -- which of course makes sense, because it's changing it to itself.
I've verified that the referenced class -- com.package.MyClass -- exists, contains no errors according to eclipse, and is in the correct directory.
Here are possible things that could be screwing eclipse up:
The class containing this "erroneous" line of code is in the package "com.package.subpackage".
There is an import statement in the file importing another class named "MyClass" from a differenct package.
There is an inner class also named "MyClass."
1. What could be happening here?
2. How can I fix it?
TIA,
John

I've had some flaky behavior when refactoring packages before, but I'm not at my Eclipse environment at the moment, so I'm afraid I'm not much help. Try deleting the explicit package from the declaration. Then right-click your code and select Source -> Organize Imports ( I think that's what it is ), and see what Eclipse says then. It may shed some light on the problem...

Similar Messages

  • I have ipad 2. Safari stopped working. Screen appears with light gray cover. Some websites show errors when debug is on. But how actually can I debug or fix it? Thank you.

    I have ipad 2. Safari stopped working. Screen appears with light gray cover and is frozen. Some websites show errors when debug is on.
    But how actually can I debug or fix it? Thank you.

    Here are a couple suggestions:
    1.  Go into Settings > Safari and Clear Cookies Clear Cache
    2.  Fully close Safari:  from your home screen, double tap your home button and the most recently used Apps will show up.  Hold your finger on the Safari App until all Apps start jiggling.  You'll see a minus sign on the upper left side of Safari.  Touch the minus and Safari will fully close.  Touch your home button again to stop apps from jiggline, then touch your home button again to return to your home page.
    3.  Reboot your iPad:  Press and hold BOTH the power and home buttons at the SAME time for at least 10 seconds (ignore the red slider) until the Apple Logo appears, then let go of both buttons and your iPad will restart, but no data or settings will be lost.
    After iPad comes back up, try Safari again, and you should be good to go.

  • IDVD burn disc shows ERROR when playing.

    Once burned a dvd player shows error.
    I go through the steps of burning and at the end it shows Multiplexing and Burning showing done and ejects the dvd.
    The iDVD status bar shows time remaining: about one minute and still has a spinning wheel.
    I started with a sample video and menu (small file)
    and tried changing speeds and quality. Still get error.
    Just trying to do the basic DVD burn. Whats up Apple?

    If you couldn't produce a disk image file, as I had suggested, then you may have one or more of the following problems:
    1. lack of free space on your startup hard drive. How much free space do you have?
    2. problems with your iDVD project. Do any yellow caution signs show up in your iDVD project when viewed in the Map view?
    3. a problem with your video and/or audio content

  • OSB - Xquery - Eclipse shows warning when a repeating node is repeated

    Hi,
    I have a requirement where a node needs to be repeated. This cannot go into a FOR LOOP as data to be mapped to Target XSD, are constants.
    For this, I repeated the node, by just changing the data in the Name and Value field. When I do this, eclipse, shows me a warning and highlights all the lines. Next time, when I switch to design view and add some direct mapping, eclipse warns me and on proceeding, removes all the lines with warning. Any help, on how I should attempt to solve this issue.
    Give below is the example xquery. Target has the node defined as repeating.
    declare namespace ns1 = "http://abc.com/abc/source";
    declare namespace ns0 = "http://abc.com/abc/target";
    declare namespace xf = "http://tempuri.org/XSD/mapping/";
    declare function xf:mapping($requestMessage1 as element(ns1:requestMessage))
    +as element(ns0:target) {+
    +<ns0:targetHeader>+
    +<ns0:RepeatingNode>+
    +<ns0:Name>Name1</ns0:Name>+
    +<ns0:Value>XPATH to Source field</ns0:Value>+
    +</ns0:RepeatingNode>+
    +<ns0:RepeatingNode>+
    +<ns0:Name>Name2</ns0:Name>+
    +<ns0:Value>Hard coded Value</ns0:Value>+
    +</ns0:RepeatingNode>+
    +<ns0:RepeatingNode>+
    +<ns0:Name>Name3</ns0:Name>+
    +<ns0:Value>Hard coded Value</ns0:Value>+
    +</ns0:RepeatingNode>+
    +<ns0:RepeatingNode>+
    +<ns0:Name>Name4</ns0:Name>+
    +<ns0:Value>XPATH to Source field</ns0:Value>+
    +</ns0:RepeatingNode>+
    +<ns0:RepeatingNode>+
    +<ns0:Name>Name5</ns0:Name>+
    +<ns0:Value>Hard coded Value</ns0:Value>+
    +</ns0:RepeatingNode>+
    +</ns0:targetHeader>+
    Regards.
    Edited by: 874988 on Jul 25, 2011 7:01 PM

    design mode is OK until you start customizing by hand your xquery... if you muck around the mapping sometimes is lost.
    I would suggest you to complete your mapping by hand!

  • Loader shows error when loading cs4 movies which uses matrix 3d class

    I am trying to load an swf which is made using cs4 and which uses the classes "flash.geom.Matrix3d" and "flash.text.engine", but when i load it it shows error and the swf is not getting loaded. i am getting the following error.
    ReferenceError: Error #1065: Variable flash.geom::Matrix3D is not defined.
    at prova_fla::MainTimeline()
    VerifyError: Error #1014: Class flash.text.engine::ContentElement could not be found.
    at global$init()
    at visup.utils::AdvancedText()
    at prova_fla::MainTimeline/frame1()
    The issue happens only when i try to load the swf using the loader. Opening the loading swf seperatly does not have any issues. I am using flex builder 3 and using Actionscript 3.
    Thanks in advance.

    are you publishing for flash 10?

  • Url iview showing error when displaying a page with frames

    Hi,
    I have a requirement of putting a site in a url iview in the portal. I created a url iview and when I preview it, it displays correctly. When I assign this to a role and access it through the navigation, it gives an error.
    The weird thing is that, it works sometimes and it does not work sometimes. The url I am trying to display is working fine, because even when the portal shows error, if I try the url straight from the browser, it loads without any errors.
    So what could be the problem? The site I am trying to display contains frames. Could this be the problem? If so, why is it working sometimes and does not work sometimes?
    Thanks in advance.
    Regards
    Ranjith

    Hi Martin,
    The issue is still there. But one interesting thing that was noticed by my team mate was that if you add the site to the list of sites on browser which can use cookies, everything works fine. Similarly, if I reduce the privacy setting of my browser to Low, it works fine.
    Again, even if you keep the privacy setting as Medium and does not allow the site to use cookies, the iview opens fine if you open it in a new window.
    Any thoughts on this?
    Thanks & Regards
    Ranjith

  • Error: Cannot Display Page----showing error when displaying SRS window.

    Hi All,
    Iam getting error when trying to display concurrent Program result view page i.e 'FNDCPREQUESTVIEWPAGE'
    You cannot complete this task because one of the following events caused a loss of page data:
    Your login session has expired.
    A system failure has occurred.
    To proceed, please select the Home link at the top of the application page to return to the main menu. Then, access this page again using the application's navigation controls (menu, links, and so on) instead of using the browser's navigation controls like Back and Forward.
    i wrote the code there in the link http://oracleanil.blogspot.com/2009/04/steps-for-insert-in-eo.html
    Please anybody tell me what the reason behind this error.??
    Edited by: 881533 on Nov 10, 2011 1:15 AM

    Hi,
    This page normally dont have back button ,
    if u use browser back button some times it throws error,
    Create a link on this page using personailization and call some function to navigate to the page which u want,
    u can navigate u another page using the link instaed of using broeser back buton.
    Thanks
    Raju

  • Eclipse oepe error when creating weblogic 10.3 server

    Hi. (Hopefully this is the correct forum for Eclipse/oepe issues.)
    When defining a new Weblogic server, I get the following error from the wizard upon entering the domain.
    The server is invalid. Error occurred reading server credential. If the domain was recreated, the server instance in Workshop must also be recreated. Required classpath for credential detection is missing. Detection is disabled.
    This happens regardless if I setup a new domain, or point it to the sample *...10.3/samples/domains/wl_server*.
    Please advise.
    Thanks
    nat

    Got it!
    On my system I have several partitions with /tmp on one, and /opt which holds all my developer stuff on another.
    Several Java programs have a problem (bug) attempting to move a file from /tmp to target, when target happens to be on another partition. (Depending on how the move is done.)
    Several Eclipse modules also have this problem. https://bugs.eclipse.org/bugs/show_bug.cgi?id=239396
    Also explained here. http://forums.java.net/jive/thread.jspa?threadID=45011&tstart=0
    (The OC4J team is well aware of this, since upon deploying an ejb project OC4J console displays something like "Can't move file from tmp, will COPY it instead.")
    Today I tried a fresh install of WLS 10.3 and of OEPE to a new directory on the same partition as /tmp.
    Voila! Everything works. It seems like the WLS installer and/or new domain wizard are bitten by this.
    nat

  • NIMax shows error when opening device and interface

    I have just installed NI-VISA 3.1. NIMax will not open the devices and interfaces configuration to allow me to see the GPIB and PXI devices.
    It gives a message of "NIMax.exe has generated errors and will be closed by Windows. You will need to restart the program."

    Hello,
    It sounds like an installation has been corrupted. As a general, first-order fix for such problems, you can uninstall and reinstall the program with corrupted files (using add/remove programs from your control panel). To get a better idea for which program has corrupted files, when MAX crashes click the details button (if one shows) in the error message (include such information in any repost as well!). If your system was stable prior to installing NI-VISA 3.1, you can try uninstalling and reinstalling NI-VISA. If you have the time, I would uninstall all of your NI hardware and software, then reinstall your NI software, then reinstall your NI hardware (you should check your hardware manuals to be sure that your specific NI hardware does not require instal
    lation before the software). Also, if you could provide the version information for all of your NI software and your current hardware setup (NI and otherwise), it may open other options for solutions!
    Thank you,
    Best Regards,
    JLS
    Applications Engineer
    National Instruments
    Best,
    JLS
    Sixclear

  • Show error when connect Company Database by DI API in 2004B

    Hi
    I use the DI API to connect company database in 2004B.  I can get the company lists by SAPbobsCOM.CompanyClass.GetCompanyList().
    I write a program to testing the connection that show two different result in client and server side.
    - It show the error -2147221164 (Class not registered), when connect company database in client PC. 
    - The same program run in server, it connected.
    I already checked my config as below
    - SAP 2004B is installed 7.20.145 SP:00 PL:25
    - SAPbobsCOM67.dll is 6.70.188.0 version, and "Special Build Description" is 21.
    The client and server side are same config.
    Any ideas how I should handle this?
    Thanks
      Winson

    sorry! it is wrong posted in here!!

  • Pages shows error when trying to export to Word

    Today, without doing any updates or making any changes to my MacBook, Pages has decided that it won't export documents to Word or PDF, showing me an error message after attempting to export. I've googled forums to try & find a solution, but all I can find is that it's something to do with Style. The Page documents are in exactly the same style etc as I was working on yesterday when I was successfully able to export documents to Word. Can anyone help please? I need to upload as Word documents for uni.

    May this thread be helpful for you?
    Can't export pages to word
    Have you tried to save any other pages file as Word, not only the documents for university?. Create a new file a write a word there then try to save it as a Word document. If it does, then the problem is in your University document as it may contain something incompatible with exporting to Word.

  • Delivery Deleted, Showing error when deleting sales order. R3, Oracle9i

    Hi experts,
    One of my users deleted delevery document and when he is trying to delete sales order it is giving error.
    Also it is showing delivery archived. How to retrieve the document.
    Thnx in advance

    Hi Dhanush,
    I suppose there is no need to run any consistency jobs for this issue(as per my understanding).
    As specified above by Senthil just try first running //CCR for the LOC_PRODUCT with category as Sales Order (also tick the VBBE table option) and Purchase Order. I think this will solve your purpose. Also please make sure that the IMs for the LOC_PRODUCT is active.
    Do let us know your findings on the same.
    Thanks and Regards,
    PP.

  • OAM Context showing error when updating context file on 11i apps

    HI,
    When i am trying to update context file using OAM, i am getting following error.
    Failed when writing Context Configuration files back to file system. Possible causes: An error occurred while attempting to establish an Applications File Server connection with the node FNDFSP_dbora12. There may be a network configuration problem, or the TNS listener on node FNDFSP_dbora12 may not be running. Please contact your system administrator. . However, you still can run AutoConfig and restart services to make sure these settings take effects.

    Sawwan,
    What is the application release? OS?
    HP Unix
    Has this ever worked? If yes, what changes have been done recently?
    This is cloned environment.
    Do you have proper entry in the hosts file?
    yes
    Is the application listener up and running? Can you view the concurrent requests log/output files? If not, please see (Note: 117012.1 - Troubleshooting the "Error Occurred While Attempting to Establish an Applications File Server Connection").
    yes application listener is up and running.
    Is the value "FNDFSP_dbora12" correct or it points to the source instance in case this is a cloned one? If the value is incorrect, please validate the entries in FND_NODES table (purge the table and run AutoConfig -- I believe you are familiar with the steps
    Value of RRA: Service Prefix is FNDSP_ not FNDSP_dbora12.

  • Skype is not working on my mac book pro. Initially it was working fine but from a week ago it is not opening. It always shows error when I perform reopen it does not do any thing. I am using apple express for wifi.

    Hi,
    I recently bought mac book pro. I installed skype application on it and initially it was working fine but from few days it is not opening the application, showing some error.... Can you please help me to solve this problem.
    bye
    Harminder Singh

    harminder@apple  -  any luck?    Try this,  open Finder and  press command-shift-G and copy and paste: 
    ~/Library/Application Support/Skype
    In this Skype folder: delete the file shared.xml  and restart Skype.
    See if this helps.

  • Spry tabbed panels: Shows everything when it shouldn't

    I have a spry tabbed panel with 2 tabs.
    In design view, this correctly shows me the contect of each of the tabs (a different table in each) when I click on the tab.
    When I run it in live view or the browser however, it displays both tabs TOGETHER, (i.e both table) and I can't select either of the tabs.
    I've attached a screen print.
    Any suggestions.

    The problem is with the tag name "s_phone".
    If iPhone Safari sees a tag name containing "phone", it automatically assumes you need the phone keypad. (Something similar goes for "zip".)
    Here's a test case setup someone made:
    http://www.iphonewebdev.com/examples/input.html

Maybe you are looking for