ECMA2 export temporary GUID instead of actual ID

I have developed a generic SQL ECMA2 agent that can call stored procedures and it uses references, but every object receives a new ID on creation, but sometimes it seems a reference is export as the temporary GUID from the refered object.
I don't want to export the temporary GUID because that means the reffered object is not yet exported, is there any way i can overcome this? i can check in the export method if the reference value equals a guid and throw an error so it will be exported in
the next export run or are there other ECMA2 options which i can use?
Need realtime FIM synchronization and advanced reporting? check out the new IM Sequencer 6.0 at http://www.imsequencer.com, it supports FIM 2010 R2, Omada Identity Manager, SQL, File, AD or Powershell real time synchronization!

Bump
Need realtime FIM synchronization and advanced reporting? check out the new IM Sequencer 6.0 at http://www.imsequencer.com, it supports FIM 2010 R2, Omada Identity Manager, SQL, File, AD or Powershell real time synchronization!

Similar Messages

When i try to sync contact via itunes to outlook, it doesnt get sync, even i checked the sync contact with outlook. Can anyone guide whats the actual problem.

When i try to sync contact via itunes to outlook, it doesnt get sync, even i checked the sync contact with outlook. Can anyone guide whats the actual problem?

I have similar problems trying to synchronize my calendar, also after update on 7.1.1. on my Iphone 5.
It doesn;t replace the outlook entries on Iphone 5.
I didn,t try to synchronize the contacts, because it may fail.
Has any one an idea what could be the reasson for thid synchronize problems.

Why does Photoshop CC 2014 install as a trial, instead of actually working?

Why does trying to update Photoshop CC result in Photoshop CC 2014 being installed as a trial (instead of actually working)?
Does anybody know?
And why can't I get ACR 8.5 for either CC or CS6?

Sign in, activation, or connection errors | CC, CS6, CS5.5
Mylenium

IW33 : Good Issue but Cost show in Plan Cost instead of Actual Cost

Hi All,
Would like have your helping hand on below issue.
Warranty Order been done the Good Issue but the cost still planning in plan cost instead of actually cost.
Information as shown below.
Thank you advise in advance.
Trevor Wong.

Abi,
Can you see that there is a difference in the the actual costs reported on the Cost tab (350 RM), and those reported using the Rep Plan/Act button (1100RM).
This is because the Cost tab costs are not correct.
As pointed out by Maheswaran KD above, please run the correction program RIPMCO00 via transaction SE38/SA38, then check the Cost tab data again.
PeteA

Slice Exports as table instead of Div

Using FW CS5, when I export a sliced image to .htm file, the contents are all in a <table> format instead of as <div> tags, for example;
<table style="display: inline-table;" border="0" cellpadding="0" cellspacing="0" width="1024">
<tr>
<td colspan="3"><img name="background_r1_c1" src="background_r1_c1.png" width="1024" height="26" border="0" alt=""></td>
</tr>
Here is the image I'm trying to slice. All the images are created ok, but no .css file is generated. As you can see there are essentially 4 boxes with some overlapping, do I need to create each box as a separate image?

Linda,
Thanks for the response, however the link you provided is for CS3, not CS5 like I mentioned. Although in your defense the steps outlined are similar to what I read in the Help pages, http://help.adobe.com/en_US/fireworks/cs/using/WSF26E374A-45C0-482b-92E7-8BBA71F98D8D.html
I was able to get the image to export <div> layouts, however they were less than ideal, so I used Visual Web Developer to create the fixed position tags, it actually took less time to do than it did to write this response.

Best practice to export TV Guide to TXT / CSV files

Dear All,
I have working TV Guide exporting to XML using Oracle 10g. Now I have a request to allow to export it to a TXT file delemeted by commas or tabs.
Thought using of External Tables will do the work, same as I import the data, but seems that I am wrong - it excepts only ORACLE_DATAPUMP type,
so the file can't be seen in a simple notepad / text editor.
What shall I do? Is there any documents I can read about?
Many thanks in advance!

3360 wrote:
BluShadow wrote:
3360 wrote:
From 10g onwards you can write to external tables. I'd be glad to be proved wrong, I don't have 10g handy at the moment, but as I recall, you could only write to external tables in data pump format, which I think is some sort of binary wrapped xml format similar to export format, not plain text.Yes, my misunderstanding of the OP's post. (see above)
The dump file set is made up of one or more disk files that contain table data, database object metadata, and control information. The files are written in a proprietary, binary format, which can be read only by Data Pump Import.That's not strictly true. You can open them up in notepad/wordpad and clearly see the data in XML format. Ok, it's got some binary rubbish around it, but the data is clear.I think the quote from the manuals refers to systems that can read the file, rather than visually reading it on a screen. What is it with XML that people think 1) they can read it and therefore 2) computer programs must be able to read it too?I never said that. ;)
The issue was about being able to open it in notepad, not about a computer program being able to read it.
>
>>
Spooling generally seems the best option for writing plain text out of the database.Ewwww! not my best option. I prefer to keep things in the database rather than rely on external utilities like SQL*Plus. UTL_FILE generally does the job nicely.. otherwise write it all into a clob and use one of the various methods of writing out clobs to do it, but UTL_FILE is the simplest.Unless the stored procedure runs as a database job or schedule, something with an IO interface will be calling it. Compared to spooling UTL_FILE requires more code, is slower since it needs to loop and write a row at a time, can only write to the db server and needs directory objects, so it is both more complicated and limited.Spooling also has a nasty habit of adding an extra blank line on the end of the file. ;)

MessageBody.txt file instead of actual message body when attachment="true"

Hi guys,
Using XMLP 5.6.3 with EBS (with patch 5968876 applied)
Trying to send out a PDF report via email using the bursting engine. We need the report to be attached but the message body to show in the actual message body window of the client.
Right now, instead of that we get the message body as an attachment called messageBody.txt
Here are some relevant lines of my control file:
<xapi:email server="email.server" port="25">
<xapi:message id="123" to="[email protected]" attachment="true" content-type="html/text" subject="My subject">Dear customer,
This is the actual message body</xapi:message>
</xapi:email>
</xapi:delivery>
<xapi:document key="${TRX_NUMBER}" output="${TRX_NUMBER}" output-type="pdf" delivery="123">
If I set attachment="false" then I get the message body but no PDF file.
Any ideas?
Thanks,
Michel

I posted this as an issue (the attachment does attach but a blank txt box also attaches) a long time ago, but didn't get a response from either Tim or Development. Here is the thread with further info.
Re: XMLP OA ROLLUP PATCH 5.6.3 bursting email creates blank messageBody.txt
Rob
http://www.scnet.com.au

Background processing - Linking temporary variant to the actual variant

Hi Friends
I have an issue in variants now.
We have background jobs for SDBILLDL (VF04) using many variants. When seeing the completed tasks in SM37, I see a temporary variant is created for running the program , like &000000000.When exploring table VARI, I could not get the actual variant, as it is a clustered field. I understand FM RS_VARIANTS_CONTENTS could help, but I dont have access to the tcode. Also I found SAP note 337618 in this connection, but I am still in a cofused stage.
In short, we are wondering why the temporary variants are created and how to link that to the actual variant.
Would appreciate your timely help with generous rewards. Thanks in advance.
REgds
Thyaga

TO find out the which values were used in the background job you can do this:
1. Go to SM37..
2. Select your jobs in the list..... click on the "Steps" button..
3. Put cursor on the program name ...click Go to > Variant..
It will show you the actual field values which were used at the time of running the job.
Regards,
Naimesh Patel

Why does Illustrator CC2014 write temporary files instead of updating existing file?

Illustrator CC 2014 (Win) keeps saving temporary files rather than overwriting an existing file. This results in illustrations not showing as updated in InDesign. The only way round it is to use the Save As command — and that doesn't always work! Also, upon closing a window tab, it frequently changes text in the illustration to default Myriad Pro, without any input from me. I have to undo text changes to make it revert to the intended font.
I've worked with every version of Illustrator since version 5.0 and this is the first time I've experienced such an apparent glitch. Any ideas why this should be happening top me?
Nick
Using: Adobe Creative Suite - Windows 7 Ultimate

As explained before, when closing a tab, an open *.eps file suddenly acquires the changed asterisk, and when I go that tab it says under Edit "Undo Type Style". Yet, I can't see any change, even when I toggle between "Undo" and "Redo". also, under "Find Font", I can't find any other font other than the branded Interstate font, even though the current font selection window shows Myriad Pro.
So, on to some serious detective work. I remembered back from the old days that *.eps files can be opened (and manipulated!) using Notepad.
I saved the file (Figure 8) which said a change had taken place and compared that file with the original by opening in Notepad, copying and pasting into Word and using the latter's compare function. Obviously there are pages and pages to look through, but then I had a Eureka moment! This was what I found:
dup /FontName get exch definefont pop
end
%ADOEndSubsetFont
/COGQMXCOGQMV+XXXXXXInterstate-Light /XXXXXXInterstate-Light findfont ct_VMDictPut
/COGQMXCOGQMV+XXXXXXInterstate-Light*1
[32{/.notdef}rp /space 13{/.notdef}rp /period /.notdef /zero /one /two
/.notdef /four 3{/.notdef}rp /eight /.notdef /colon /semicolon 9{/.notdef}rp
/E /F 2{/.notdef}rp /I 9{/.notdef}rp /S /T 12{/.notdef}rp
/a /b /c /d /e /f /g /h
/i 2{/.notdef}rp /l /m /n /o /p /.notdef
/r /s /t /u 138{/.notdef}rp]
COGQMXCOGQMV+XXXXXXXInterstate-Light nf
COGQMXCOGQMV+XXXXXXXInterstate-Light*1 [8.8569 0 0 -9 0 0 ]msf
3.25928 10.4355 mo
(Figure 8)
I have used the XXXXXX to protect my client's anonymity, but the crossed out coding "/COGQMX" is to be found in the unchanged file, and the COGQMV in the changed file!
Although I have described this as a Eureka moment, I actually don't understand the problem, but I feel I have narrowed it down and Mike is right — it IS a font issue!!

[SSRS 2012] export to html (instead of mhrml) without attach file

Dear all,
I enable export to HMTL format on reporting services. But the issue is the file is sending in attachment instead of seing directly on mail body.
How I can have my report directly on mail (like MHTML export, but didn't work here (mail are sending, but exchange send a return error with message :
"This message exceeds the maximum message size allowed. Microsoft Exchange will not try to redeliver this message for you. Please make the message smaller --
by removing attachments, for example -- and try sending it again, or provide the following diagnostic text to your system administrator." )
Thanks in advance,
BR

Hi phoneix75,
According to your description, you want to export your report into HTML format and display the report directly in the email instead of using an attached file. Right?
In Reporting Services, we can export a report into different format (MHTML, CSV, Excel…). For these type of files, only MHTML file can be displayed in email directly because Exchange/Outlook can only render MHTML format. It can’t recognize other format so
that they can only be kept in attached file. For an email, it also has max size for its content area. So if your report exceed this max size, it will come out the error message as you post. Unfortunately, your requirement can’t be achieved currently.
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Magazine 36 pages, exporting around guides help.

So I designed a magazine in PS. And it's like a 3.5gb file (65"x88"ish). Typically I have taken all the folders (1 page per folder) into another document 8.5x11 and then centered each folder to the canvas, and then exported each one individually. It just takes WAY too much time doing that - I really like seeing the whole magazine as I design it. I need to export JPG 12, so when I compress I get decent quality through AcrbatPro9. It would be awesome if there was a way of exporting around the guides that I have set up.
Thanks for the help.

InDesign is the right tool for the job.

"more info" in Get Info showing "--" instead of actual infos for newer videos and images

I've just noticed that when I click on "Get Info" on my newer pictures and videos, the "more info" section is now showing "--" instead of the dimensions of the images and videos. However when I go to my older files, the info is showing. Also if I search any of the newer files (those with the missing info) in Spotlight, it doesn't show up. I've done some research and some people suggest reindexing Spotlight, but that never worked for me. In fact, even if I exclude a folder in my Privacy list, it's still showing as a result when I search them. I'm sure this is a problem with Spotlight as it stores the dimensions info, but since reindexing it is not a solution, can it be solved in some other way?

It takes time on newer things, but might have to be opened first or something.
If you want, you can clear the caches with OnyX (#12) and that would rebuild and repair the entire sub-system.
..Step by Step to fix your Mac
Mac maintainence steps

LR dt to be taken as BiIlling dt instead of Actual Goods issue dt

Hi
The normal Business practice is the system takes the actual goods issue date mentioned in the delivery document as the billing date and accordingly ,the payment terms or credit days given to the customer starts from this date.
Now the requirement is
The payment terms has to be with ref to LR (lorry receipt ) date and not on Actual goods issue date, for example: If the Actual goods issue date is 15th April & the LR date is 17th april then the customers credit days has to start from 17th and not from 15th april .
Because ,in real time we do not know when the transporter will pick and deliver the goods to the customer,so if the transit time is 2 days ,then customer would be loosing the ,2 credit days and the invoice would be due on the 7th day ,where as the customer would have received the stock 5 days back and not 7days back.(if the terms of payment is say 7 days)
can any one suggest how to addresse this scenario apart from the following
1) Define the terms of payment as longer by 2days
2) Give the actual goods issue date as 2days in advance
shashi

Hi TricaC,
I'm sorry to see your friend is having problems with his BT Broadband. Please use the 'contact the mods' link in my forum profile to send in his details and we'll be happy to help. You can find the link by clicking on my username.
Thanks
Neil
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Adobe reader logo on file preview instead of actual preview of pic of scanned item

when I scan a pic into pc & SAVE it as a pdf, how it is viewed in my file explorer files ("my computer") is w an ADOBE logo. I want to view actual file (actual pic). For example, When I open MY COMPUTER to go into MY DOCS, I see the new scan but it is cloaked by the adobe logo, I have to open it all the way up (in paint or another program) to see what the pic is. How can I change this?
further explanation:
when I want to view the item in my file folder: I go to file explorer ("my computer") then I open My Docs. When I view all the items I've scanned, the only thing I see for each file is an adobe logo for the scanned file. I do not want to see the logo, I want to see the actual photo in the preview

Thank you for your help. I contacted Kodak online chat and they couldn't figure it out. I also used nitro pro 8 (another PDF maker) and I can see the actual file pic preview (not as icon, icon shows up @ bottom of pic but I can actually see the picture).
Also, to "Pat":
i saved them as PDF (searchable). i set the display as detailed thumbnails already - still issues. i also changed a few things, and this was the process:
opened file explorer ("My COmputer")
Selected "view" category
"options" ---to sub-category: change folder and search options
In folder options, selected "view" tab
And in advanced settings, Under "file and folders"
Display file icon on thumbnails
i turned it off then, i selected "apply to all folders", i closed file explorer, scanned somethg & went back to file explorer & it was still showing up as adobe icon, no picture of actual pic of item i scanned.
thank you both. is it a WINDOWS 8 issue?

Exported file is longer than actual podcast.

Every time I export my audio file from Garageband to ACC format, the file is always longer than the audio that is contained in the file. How do I make a 38 second file export as a 38 second file?
Thanks!

You may not have the End of Song marker at the exact end, or have some blank space at the beginning of your project.
You can use the Cycle Region to export the exact length you wish. (Press C and adjust the yellow CR at the top of the Timeline. You may want to zoom in for more accuracy).

ECMA2 export temporary GUID instead of actual ID

Similar Messages

Maybe you are looking for