Using Disk Utility to restore an image stored on the network

Hello --
I have a disk image, Image.dmg. When I boot from the 10.4 installer DVD, Disk utility is able to restore this image from a firewire drive to an internal drive.
Image.dmg is also on a network share, hosted via AFP. When I boot from the 10.4 installer DVD, select "Restore," and specify that share as the source:
afp://172.28.40.XX/Image_Share/Image.dmg
I get this message:
"You must authenticate in order to restore."
I imagine that the server would like for me to log on before giving me access to the share. However, Disk Utility doesn't provide me with an authentication dialog.
Any ideas?

Can't really tell if you are trying to restore an image from a locally attached firewire drive or (as from the original poster of the message) from a remotely shared location. If you are restoring from a remote share location then have you tried:
afp://username:[email protected]/Image_Share/Image.dmg
Replacing username and password with the account information which has access to that remote share location.
Good luck,
TK

Similar Messages

Hi, I have a hard disk failure so to recover my data I am using disk utility to restore the data on an external drive while booting from a second external hard drive. When I perform the operation it gives me an input/output error and stops. Any tips?

Hi, I have a hard disk failure so to recover my data I am using disk utility to restore the data on an external drive while booting from a second external hard drive. When I perform the operation and after having selected both my destination and source drives, the operation begins but soon fails due to input/output error. If I try to create an image of the drive it gives me the same error message. Any help would be much appreciated.

Disk Utility only creates a image of the drive, so it's no help getting exactly what you want, which is your files. If the file structure is messed up or the drive is failing then it's no help.
If you have a external boot drive and you can't access the internal non-booting drive though the typical Finder and windows to transfer your files via drag and drop methods, then you need to install Data Rescue on the external boot drive and it will do as best as it can to recover your files. (works on non-encrypted/non-Filevaulted drives only)
.Create a data recovery/undelete external boot drive
Are you sure you have hard drive failure, or that OS X isn't merely not booting?
Because if the drive is working physically, then there is a host of fixes
..Step by Step to fix your Mac
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents#/

When I repair disk permissions using Disk Utility and it says it's completed the task, I click on it again and it repairs more. This has been going on for hours now. Could there be that many wrong permissions? Should it get to "all repaired" eventually?

When I repair disk permissions using Disk Utility and it says it's completed the task, I click on it again and it repairs more. This has been going on for hours now. Could there be that many wrong permissions? Should it get to "all repaired" eventually?

It's normal behavior. You don't have to worry about. Most of what's listed is just a report of what the utility finds., not necessarily that there is omething wrong.
If you want to find out more, read the link below, or see the More Like This links on this page.
http://support.apple.com/kb/TS1448?viewlocale=en_US

Can't drag disk icon in Disk Utility to restore backup image

I'm restoring my MacBook from a backup image I made on my external HD with SuperDuper! and I've run into a big problem. I've booted from my OS X CD. I'm in Disk Utility, and while my external drive mounts and I can select the image in the 'restore' pane, I can't for the life of me drag any icon to the 'destination' field. Any help with this?

Hi
I have exactly the same problem,i backed up my internal HD, and want to restore it by starting my mac mini intel single core with the original delivered os dvd including diskutilities.But no way it is not possible to drag a volume or partition to the required field to the left.I called apple support and the guy did not understand what I'm talking about at all, and told me he will forward to the developer dep.
Never mind, I recovered the mac mini intel with ccc , thanks God I did an image backup and a ccc !
Yesterday my mac mini intel audio hardware has broken, so I have to do another bkp with booted up os dvd to bring in to a serviceprovider.
Tried to recover for security issues , but disk utilitiy did not work again , no drag 'n' drop possible - this problem never exists under powermac before and its driving me mad under intel macs
I did a trick to show thats it is definitely the revision of this os dvd and disk utilities (x86 intel rev.)
I did a clean install form this os dvd, then cloned the interal harddisk to a external firewire disk making it bootable (using ccc for all)
I did no software update just clean from the dvd, restarted , choosed external firewire harddisk, et voila - opened disk utilitiy to restore dmg image for the internal hd and drag 'n' drop works without problems!!
Resumee:
my delivered os dvd 10.4.5 AHT vesrion 3A102 disc version 1.0 2Z691-5738-A has the biggest bug of all, it can not recover a backed up image at all - that is a revision e.g. release bug (error).
I will have to return this dvd !
Greetings Tobias

Using Disk Utility to restore/copy disk - who is correct?

I had two long talks with two separate Apple Care people online today who both insisted what they were saying was right and the other person was wrong.
Hmm....
My question is this.
I have a MBP and the internal HD is currently empty. I've been running off of an external HD for about a year now.
I want to clone my external HD into my internal HD and use the internal HD as my system disk now.
One Apple Care person said to go into Disk Utility, select the source disk, from the tabs on the right hand side select Restore and then drag the source disk into the source field, drag the target disk into the target field and press restore. She said this will make a complete clone of the external HD in the internal HD.
The other Apple Care person said "No no no. You can't do that to clone a system disk that way." He said the best thing was to install a new system and then use the restore as a new system from Time Machine option (where I also have a backup.)
I believe the second method will work, but it's more cumbersome for me because I haven't been backing up everything in Time Machine. I have excluded items, such as podcasts and Parallels disk images.
If I could do this from the external system disk life would be easier.
But is the first Apple Support person right or wrong about this? Can I use Disk Utility to copy the system disk from one external HD to another that way?
Thanks,
doug
p.s. I am not in the market for 3rd party software to deal with this one-time issue, so if possible I would like to accomplish this using OS X included features...

The advantage is CCC has built in routines that "bless" (see the Terminal.app command "bless") the
os x installation so it will boot properly on the new volume it is being installed on.
Disk Utility simply copies (restores) files from one volume to another. Many times this works just fine.
Sometimes it won't boot afterwards. Most of the time (as long as there are no system files missing
or corrupted) a person may "bless" the drive and restore it to working condition.
CCC is not a "magical" application, it is in fact a front end to applications that already exist separately
in OS X (asr, hdiutil, diskutil, bless, etc.).
It doesn't matter to me how you do it. It's your time not mine. Everyone should spend some time
behind the command line in terminal. I do many tasks using the command line, including and not
limited to complete system restores, backing up data, disk partitioning, installing software, disk
repair, permissions repair, ACL management, restoring data, managing disk images, network
management, user management, file management, etc. Many people are fearful of the command
line. I feel just the opposite, I'm fearful without it.
Say Hello to my little friend.
http://manuals.info.apple.com/enUS/Command_Line_Adminv10.5.pdf
http://www.apple.com/downloads/macosx/unixopensource/clix.html
http://www.macobserver.com/tips/macosxcl101/index.html
http://www.matisse.net/OSX/darwin_commands.html
Kj

Using Disk Utility To Restore

Last month I did a Disk Restore onto my large external hard drive using Disk Utility.
I would like to do that monthly, so as to ensure that whenever I add, change, delete data, configurations, etc. on my internal hard drive..that I have the latest restore data..plain and simple.
My question is: In doing subsequent disk restore maneuvers on a monthly basis, do I need to manally delete the previous month's restore data from my external hard drive or will it just overwrite (like copy and replace) the current data on my ext drive?
I don't want the restore feature to duplicate any data from previous transactions on my ext drive. That's why I am asking. Does anyone know?
Thanks,
Henri
Powerbook G4, 1.67Ghz Superdrive 2GB RAM Mac OS X (10.4.7)

Disk Utility->Help->Restoring files from a disk or disk image
You can choose to erase the destination disk and then have the disk image copied to it. Alternatively, you can choose not to erase the disk and add the disk image information to the current contents of the destination disk.
As I read this, if you don't erase the previous copy, when your restore, everything that's on the source will overwrite similarly named items on the destination. You cannot do incremental updates using DU's restroe function. For that, you need something like Carbon Copy Cloner, SuperDuper!, etc.

Using disk utility to burn new image dvd's

Ok I just learned to burn DVD'd using Disk Utility and New image.
But I have come to halt in my burning with a new issue.
My issue is that I have a file that is 4.63GB. When I make a new image so that I can burn it, it increases the size of the file(Video TS) to 5.13GB. Making it to big for a 4.7GB DVD.
My question is is this normal for the new image file to increase in size, and is there a way for me to stop this from happening. Or can anyone give me any other suggestions. Please help.

Ok I have never tried that, as this is the first time it is suggested to me.
The reason i have been doing it via DU, is because this has been to only way to get it to play on
home DVD player and burn with the UDF setting. I was told to do it this way when I was trying to burn
copies of my nieces fifteens that was prof. done on a DVD.
I am trying to burn a copy of a movie so that it can be played on home dvd players. Yes I have done this before and the copies I burned via DU/new image, worked perfectly. And the ones I burned by just choosing file and burning it did not work.
So any help would be great.

When I delete files on a USB, it doesn't free up memory on the stik. I find I have to empty the entire stik, use Disk Utility to 'erase' it, then transfer back the files I removed to free up all the space on the stik. Is this the best practice?

It frustrates me that if I delete a file from a USB, it doesn't free up the memory on the stik. I have been removing all the files from the stik, opening Disk Utility and erasing the empty USB. That frees up the entire stik. Then I have been transferring back the files I removed from the stik. The result is that I have memory available to use again. It seems to me this is an unnecessarily complicated and time consuming way to get the result. Is there a shorter way to do this?

Hello Horst,
Thank you for the question. Have you been emptying your trash after deleting the items? For the item to be removed from your USB device, you will need to empty the trash on your MacBook Pro after you delete the items, as described in the featured discussion below. Your USB device will still need to be connected when you do this:
Choose Empty Trash from the Finder menu. Unlike Windows, the trash needs to be emptied manually for any drive other than one mounted through the network.
Can't delete off my USB drive
https://discussions.apple.com/thread/1946841
Thank you for using Apple Support Communities.
Best,
Sheila M.

I tried to burn windows 7 Iso using disk utility for more than 3 time with the minimum speed, but all the three times I got error saying "disk burn failed unable to verify"?

I have tried with three different blank DVDs but all got the same error message. But after I got the error message when I reinsert the DVD I can see the ISO in the DVD. So I went a head with the installation but the installation stops just after it starts. I have even tried burning the disk at 2X speed.

It sounds like your optical drive may be dirty. The lens probably needs a cleaning. You can go to somewhere like Best Buy and pick up a cleaning kit.

Error in Copying a non-commercial DVD using Disk Utility

I have a non-commercial DVD. I am using Disk Utility to make an image and reproduce the DVD. It consistently runs through the cycle and at the very end I get a dialog box:
STOP "Input/Output Error"
Any ideas? I really would like to make back up copies of this video event.
I have used this method before to copy non-commercial DVDs
Thanks
glb
G5 Mac OS X (10.3.9)

Click here for complete instructions. This solution may cost $20.

Disk Utility: What does "scan image for restore" do?

Before restoring a disk image, I know that I need to use Disk Utility's "Scan Image for Restore…" feature.
Exactly what does this feature do?

I asked because I didn't know.
I was helping someone upgrade his PowerMac G5 from the original 80GB hard drive to a 1TB drive.
Since the G5 can accommodate two internal drives, I could have simply added the new drive and used Disk Utility's "restore" feature to migrate his data directly from the old drive to the new drive.
But it was more convenient for me to work at home so I removed the old drive, and brought it home along with the new drive.
I couldn't connect both drives to my MacBook Pro, since I only have one SATA drive dock. So I did it like this:
1. Connected the old drive to my SATA dock.
2. Create a disk image from his old drive, saving it to an external USB drive.
3. Disconnected the old drive from the SATA dock and connected the new one.
4. Restore the disk image to the new drive
Of course, when I tried step 4, I got an error message about needing to do a scan first. That's what led me to this question.
I have a follow-up question: When I created the image, I didn't bother changing the default image format, which is "compressed." If I had given the matter a little thought, I could have created a read-only image, since I would never need to change the image.
If I had used read-only, would Disk Utility have created the checksums on-the-fly when it created the disk image?

I recently downloaded is x mountain lion and while it finished it erased all my data, some of which I need. When using disk utility I found my old data but it says corrupted. I can't repair and while restoring the error code 32 Broken Pipe appears. Help?

My data I need is on my computer but it needs to be repaired but can't and when I try to restore it/back it up it ends abruptly with error code 32 broken pipe.
It was damaged while installing os x mountain lion and I found my data on disk repair (utility)

Sounds like your hard drive is badly corrupted, likely due to problems that were already there when you started trying to install Mountain Lion. The problem is, if you don't have any backups already, you may not be able to recover all your data from this state. Do you have backups of that data already?
If not, I assume when you say that "it needs to be repaired but can't," you mean that Disk Utility tells you there is a problem with the disk, but that it is unable to repair it? If so, you can try repairing the drive using DiskWarrior, which can repair problems that Disk Utility cannot. That may give you access to your data again, but may not.
Also, it's important to understand that if your data is not backed up, everything you do with the computer runs the risk of overwriting or corrupting that data. You may want to go straight to trying to recover your data. See Recovering deleted files.
Regarding the error code, if you're trying to back up the drive using Disk Utility's Restore tab, note that that is often not successful when the drive you're trying to back up is corrupt.
Once the situation is resolved - either because you have backups, are able to recover your data files or are forced to accept that they are gone permanently - you will need to erase the hard drive and reinstall the system and all your apps from scratch.

Using Disk Utility Restore function to clone external hard drives

Hi all,
I have a WD 3Tb My Book external hard drive which I want to use as a replacement for an older WD 1Tb My Book external hard drive. I would like to use Disk Utility's built-in Restore function to clone my old external hard drive onto my new external hard drive. Unfortunately, Disk Utility will not allow me to drag the new drive to the "Destination" box; I can drag the old drive to the "Source" box just fine. Why is this? Am I doing something wrong?
It might be important to note that my old external drive is formated to FAT32, whereas the new drive came pre-formatted to NTFS. Do I need to reformat the new drive to FAT32 before dragging the disk to the "Destination" box? In other words, do the source and destination drives need to be the same format in order to use Disk Utility's Restore function?
Thanks very much in advance.

Are these drives being used on Windows machines? If so then you will need to create a new partition from the Partition Scheme dropdown menu after which you can set the scheme to MBR. If the drives are being used only on the Mac then you have to prep the new drive as follows:
Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
After you copy your files from the old drive to the new one you want to repartition and reformat the old drive in the same way as outlined immediately above.

Upgrading HD and cloning using Disk Utility

I'm going to upgrade my MacBook Aluminum Unibody with a larger and faster hard drive (500 Go Seagate Momentus 7200.4 SATA 2,5" 7200T 16 Mo).
As you'd probably expect, I will need to clone my current system to the new HD.
To achieve my needs, my strategy is the following:
1) booting up using Snow Leopard install DVD
2) connecting my new drive through a USB enclosure
3) using Disk Utility's "Restore" feature with Macintosh HD as source, and the new drive as destination
4) switching the drives
I came across tons of people in the same scenario as mine during my research for the best solution, but it always ended up with Carbon Copy Cloner or Super Duper. Almost nothing about Disk Utility.
If they seem to work fine for most of us, I find Disk Utility more trustful (1), and I prefer block-to-block to file-to-file copy (2), as the last method will necessarily skip some "uncopyable" files.
I have none of the above software, and according to its documentation, I believed to understand that CCC can't achieve a block-to-block copy running on the source system (which does make sense).
So, considering I only need to clone & switch (no backup purpose or whatever) my hard drives, why would I use CCC/Super Duper over Disk Utility?
Yeah, a file-to-file copy will kind of defragment my system, but is there something wrong with my method? I really don't understand why DU is so underrated.
Any feedback much appreciated!
Thanks,
Mickael

Mickael
I see nothing wrong with using disk utility to do what you want. If I'm correct, you can only create a disk image with disk utility, so it will not be bootable. It will accomplish the same goal as other software to restore as you described. The advantage to cloning you drive with the other applications is that you will be able to boot from the external drive if problems arise. Both applications are free to download.
I used super duper to clone to an external drive as a backup and keep it updated. I always have it to boot from if my main drive fails. The process is up to you.
Note: I though you needed a disk image to restore from, but I was wrong. You can do a restore from the drive itself.
As i said, I see no problem. It's your choice.
Message was edited by: Glenn Leblanc
Message was edited by: Glenn Leblanc

Backup file too big using Disk Utility

I need to back up my 160GB Mackintosh HD on my imac OSX 10.6.3 (Snow Leopard) using disk utility. After a short period of the imaging process I get a message saying 'file too big'. What can I do to resolve the problem? My external drive is 1TB with 500GB available.
I've tried using Time Machine but this seems to want to wipe my external disk.

You may or may not be able to use the Disk Utility in the /Applications/Utilities/ folder to shrink the single partition and create a new one in the free space.
(76132)

Using Disk Utility to restore an image stored on the network

Similar Messages

Maybe you are looking for