Edge 2014.1 Replay issues

The new version of Edge Animate 2014.1 does not properly reset all elements when replaying for my existing projects which I just upgraded for this version. I find that I have to do 2 things to resolve the issue which were not necessary before:
- add keyframes to the '0' position for all affected elements
- turn off all auto play symbols and manually add a 'play' trigger sometime after the '0' position
Hoping for an update to fix these issues

Hi,
We are really sorry about that you are still getting the same issue.
Can you please confirm the version number by going Help > About. The version should be listed as 2014.1.1.
If this is correct, then please share the composition with us. We will try at our end.
Regards,
Devendra

Similar Messages

Adobe edge 2014.1.1 freeze

iMac (21.5-inch, Late 2013)
2,7 GHz Intel Core i5
8 GB 1600 MHz DDR3
Intel Iris Pro 1536 MB
mac version : 10.10.2 (14C109)
hello all,
I get a freeze with adobe edge 2014.1.1 with the above configuration . any clue ?
as animation i took only a fade in fade out of an image.
regards,
William
system.log:
Mar 25 13:33:39 L05MAC16.local Adobe Edge Animate CC 2014.1 Helper[4124]: Internals of CFAllocator not known; out-of-memory failures via CFAllocator will not result in termination. http://crbug.com/45650
Mar 25 13:33:40 L05MAC16.local Adobe Edge Animate CC 2014.1[4117]: WARNING: The Gestalt selector gestaltSystemVersion is returning 10.9.2 instead of 10.10.2. Use NSProcessInfo's operatingSystemVersion property to get correct system version number.
        Call location:
Mar 25 13:33:40 L05MAC16.local Adobe Edge Animate CC 2014.1[4117]: 0   CarbonCore                          0x9b0817c7 ___Gestalt_SystemVersion_block_invoke + 135
Mar 25 13:33:40 L05MAC16.local Adobe Edge Animate CC 2014.1[4117]: 1   libdispatch.dylib                   0x976f5130 _dispatch_client_callout + 50
Mar 25 13:33:40 L05MAC16.local Adobe Edge Animate CC 2014.1[4117]: 2   libdispatch.dylib                   0x976f50b5 dispatch_once_f + 251
Mar 25 13:33:40 L05MAC16.local Adobe Edge Animate CC 2014.1[4117]: 3   libdispatch.dylib                   0x976f60d8 dispatch_once + 31
Mar 25 13:33:40 L05MAC16.local Adobe Edge Animate CC 2014.1[4117]: 4   CarbonCore                          0x9b013e88 _Gestalt_SystemVersion + 1050
Mar 25 13:33:40 L05MAC16.local Adobe Edge Animate CC 2014.1[4117]: 5   CarbonCore                          0x9b013a39 Gestalt + 150
Mar 25 13:33:40 L05MAC16.local Adobe Edge Animate CC 2014.1[4117]: 6   dvacore                             0x00425d77 _ZN7dvacore7utility16GetSystemVersionEv + 87
Mar 25 13:33:42 L05MAC16.local Adobe Edge Animate CC 2014.1 Helper[4129]: Internals of CFAllocator not known; out-of-memory failures via CFAllocator will not result in termination. http://crbug.com/45650
Mar 25 13:33:42 L05MAC16.local Adobe Edge Animate CC 2014.1 Helper[4130]: Internals of CFAllocator not known; out-of-memory failures via CFAllocator will not result in termination. http://crbug.com/45650
Mar 25 13:33:42 L05MAC16.local Adobe Edge Animate CC 2014.1 Helper[4131]: Internals of CFAllocator not known; out-of-memory failures via CFAllocator will not result in termination. http://crbug.com/45650
Mar 25 13:33:42 L05MAC16 com.apple.xpc.launchd[1] (com.apple.xpc.launchd.user.502.100005.Aqua): Caller not allowed to perform action: Adobe Edge Anim.4130, action = pid-local registration, code = 1: Operation not permitted, uid = 502, euid = 502, gid = 20, egid = 20, asid = 100005
Mar 25 13:33:42 L05MAC16 com.apple.xpc.launchd[1] (com.apple.xpc.launchd.user.502.100005.Aqua): Caller not allowed to perform action: Adobe Edge Anim.4129, action = pid-local registration, code = 1: Operation not permitted, uid = 502, euid = 502, gid = 20, egid = 20, asid = 100005
Mar 25 13:33:42 L05MAC16.local Adobe Edge Animate CC 2014.1 Helper[4130]: Process unable to create connection because the sandbox denied the right to lookup com.apple.coreservices.launchservicesd and so this process cannot talk to launchservicesd. : LSXPCClient.cp #416 ___ZN26LSClientToServerConnection21setupServerConnectionEiPK14__CFDictionary_block_invoke () q=com.apple.main-thread
Mar 25 13:33:42 L05MAC16.local Adobe Edge Animate CC 2014.1 Helper[4130]: Process unable to create connection because the sandbox denied the right to lookup com.apple.coreservices.launchservicesd and so this process cannot talk to launchservicesd.
Mar 25 13:33:42 L05MAC16 com.apple.xpc.launchd[1] (com.apple.xpc.launchd.user.502.100005.Aqua): Caller not allowed to perform action: Adobe Edge Anim.4131, action = pid-local registration, code = 1: Operation not permitted, uid = 502, euid = 502, gid = 20, egid = 20, asid = 100005
Mar 25 13:33:42 L05MAC16.local Adobe Edge Animate CC 2014.1 Helper[4129]: Process unable to create connection because the sandbox denied the right to lookup com.apple.coreservices.launchservicesd and so this process cannot talk to launchservicesd. : LSXPCClient.cp #416 ___ZN26LSClientToServerConnection21setupServerConnectionEiPK14__CFDictionary_block_invoke () q=com.apple.main-thread
Mar 25 13:33:42 L05MAC16.local Adobe Edge Animate CC 2014.1 Helper[4129]: Process unable to create connection because the sandbox denied the right to lookup com.apple.coreservices.launchservicesd and so this process cannot talk to launchservicesd.
Mar 25 13:33:42 L05MAC16.local Adobe Edge Animate CC 2014.1 Helper[4131]: Process unable to create connection because the sandbox denied the right to lookup com.apple.coreservices.launchservicesd and so this process cannot talk to launchservicesd. : LSXPCClient.cp #416 ___ZN26LSClientToServerConnection21setupServerConnectionEiPK14__CFDictionary_block_invoke () q=com.apple.main-thread
Mar 25 13:33:42 L05MAC16.local Adobe Edge Animate CC 2014.1 Helper[4131]: Process unable to create connection because the sandbox denied the right to lookup com.apple.coreservices.launchservicesd and so this process cannot talk to launchservicesd.
Mar 25 13:33:42 L05MAC16 com.apple.xpc.launchd[1] (com.apple.xpc.launchd.user.502.100005.Aqua): Caller not allowed to perform action: Adobe Edge Anim.4130, action = pid-local registration, code = 1: Operation not permitted, uid = 502, euid = 502, gid = 20, egid = 20, asid = 100005
Mar 25 13:33:42 L05MAC16 com.apple.xpc.launchd[1] (com.apple.xpc.launchd.user.502.100005.Aqua): Caller not allowed to perform action: Adobe Edge Anim.4129, action = pid-local registration, code = 1: Operation not permitted, uid = 502, euid = 502, gid = 20, egid = 20, asid = 100005
Mar 25 13:33:42 L05MAC16 com.apple.xpc.launchd[1] (com.apple.xpc.launchd.user.502.100005.Aqua): Caller not allowed to perform action: Adobe Edge Anim.4131, action = pid-local registration, code = 1: Operation not permitted, uid = 502, euid = 502, gid = 20, egid = 20, asid = 100005

Hi William,
Are you still facing this issue? If you have a purchased subscription to CC or Edge Animate, send me your Adobe ID, location, and phone number over a private message. Click my picture and use the message option.
Thanks,
Preran

Edge 2014.1.1 Fonts

Ive been having issues with custom fonts with the new patch update.
They worked in the previous version then I opened my project in the new update and all my custom fonts now load in as Times New Roman (not a pretty font)
I use @fontface
<style type="text/css">@font-face {    font-family: _font_name_; src: url(_name_of_font_file_.woff);}</style>
Is anyone else having this problem?

Yup, same problem here. I use the Adobe Edge 2014.1.1 update.
Double checked all settings, but could not find anything.
Some extra info:
I found that Edge now injects the embed code as a string (replacing the < and > characters bij < and >). Thats probably why the code is not recognized and the fonts are not displaying.
I am now injecting the fonts myself with some code (top line is webfont css). No preview of the font in Edge, but it is working in the browser now:
// WEB FONTS
var css = "@font-face { font-family: 'alwybwebfont'; font-style: normal; font-weight: bold; src: local('alwyb-webfont'),       url('fonts/alwyb-webfont.woff') format('woff'),       url('fonts/alwyb-webfont.ttf') format('ttf'),       url('fonts/alwyb-webfont.eot') format('eot');}",
    head = document.head || document.getElementsByTagName('head')[0],
    style = document.createElement('style');
style.type = 'text/css';
if (style.styleSheet){
   style.styleSheet.cssText = css;
} else {
   style.appendChild(document.createTextNode(css));
head.appendChild(style);
Hope this helps some of you...

2014.1.1 issues...

Ok well I followed the instructions to log in and log out of my account in Creative Cloud and it's showing this...
when I open up Adobe Edge 2014.1 (because that's the only option I have, ie my applications only show these...)
and I look in the "About Edge Animate" menu, I get this...
ie no 2014.1.1
and in the bottom left hand corner of 2014.1 I'm getting...
and so it takes me here
but once again I dont' have a dropdown menu to choose another version to download, all i have is a "Download Trial" button even though I've logged out and in again on this page.
Very frustrating!!!

Well that was frustrating so I apologise if that happens again with my login, I've now changed it to twisted_pancreas to better reflect my website name, ie twistedpancreas.com
But back to the original post, it now seems I can access the dropdown menu, but when I do it only has these options...
should there be a 2014.1.1 ? Because when I choose the 2014.1 (which I already have installed) it jumps to the Creative Cloud and does nothing and when I open Edge 2014.1 it's not 2014.1.1 it's still 2014.1 (sigh what a day).
And the weird thing is when I go to Help in Edge 2014.1 the updates menu link is greyed out.

Edge 2014.1 - trouble opening old formats (2014.0.1)

Greetings,
I'm trying to open a file with Edge 2014.1 (october 2014) that was created by the previous version (2014.0.1).
It shows a message saying that the file will be automatically upgraded and saved with a suffix 'upgrade'.
After this, when I try to preview it in the browser, the content doesn't show.
Turns out that there is a class (.edgeLoad-EDGE-18915064) used to hide the content while is loading, and, after this, edge is not removing the class to show the content.
I already tried to install the previous version, all looks great, but for some reason, the editor is so sluggish that is almost unusable.
Thanks.

.edgeLoad-EDGE-XYZ is a class added for all the compositions to keep the stage hidden till the composition is completely loaded. Edge runtime will show the stage once the composition is ready.
I tried previewing your content with CC 2014.1 and its working properly for me, what is the error that you get? I noticed that you have two versions of jQuery in your compositions. You can probably get rid of one.
-Dharmendra

Edge OAM audio playback issues with Adobe DPS

Hi,
Previous to the CC 2014.1 update, Edge OAM animations placed into my Adobe DPS folios worked and interacted fine. E.g. I had animation build and then on 'tap' elements would animate and playback audio to reflect the movement. Since updating to the 2014.1 version, any newly created OAM files placed into Adobe DPS, the audio does not work.
Please can you advise on this issue. If there is no fix, can I get access to the previous version of Edge as it is vital I regain this function.
Many thanks
Lewis

Hi,
Thank you for the post.
Can you please share your composition in which you are getting this issue. We will investigate this issue.
In the mean time, you can install the previous version of Edge animate using below link.
HTML animation | Download free Adobe Edge Animate CC trial
Regards,
Devendra

Mid-2014 rMBP Display Issue

Last week, bought mid-2014 base model rMPB 13.3. Display was warm yellowish with greenish tint. Compared with store models, which all had cool blue. Replacement had same issue, so I asked for refund. Display looked worse than my late 2010 base model 13" MBA. Want to stay with Apple, but am concerned that all, if not most, of the mid-2014s have this defect. Can anyone corroborate?

Anybody???

MAC Mini late 2014 Sleep Wake issue

I just bought a MAC Mini late 2014 version with Yosemite pre-installed, and got a similar sleep wake problem.
It's connected to an ASUS IPS 27" screen using HDMI interface. When the Mac goes to sleep after 15 min, or when I press the button to force it to sleep.
If you type on the keyboard and the trackpad within 1 minute (before the screen also goes to sleep because of no HDMI signal), then the wake up will work.
If you wait till the screen goes to sleep also, then no matter how hard you pound on the keyboard or on the track pad, the MAC will not wake up.
The only way to wake it up is to power off the screen, then power it on again. Then type on the keyboard or move your track pad while doing that.
This is really annoying. I have to set to "Never" turn the display off to avoid this issue.
Called the Apple tech support who recommended I set up the energy saver like this below. But still could not fix the issue.
He told me to bring the Mac mini back to the shop to check.
I doubt it's a hardware issue. My theory is that this could be a software bug that somehow
the setting of "Prevent computer from sleeping automatically when the display is off" is not in effect even if you turned it on in the power saver preference.
So, when the computer goes to sleep, there is no more HDMI signal, then the screen also goes to sleep.
And if "Prevent computer from sleeping automatically when the display is off" is not in effect, then even if you type on the keyboard, the computer will not wake up as the screen is asleep. The screen will not wake up as no HDMI signal comes from the computer.
This turns into a viscious cycle, or a deadlock. Nobody is waking up.
This is simple logic. I don't know why systems are designed to work like that. Just too annoying....
I hope apple can fix this software bug asap.
I did try to convert my HDMI cable to min-display port and try to plug that into the thunderbolt port to see if it helps.
The same issue appears. The only difference is, with the HDMI port, once I am able to wake up the computer by power cycling my screen, i will see that I am prompted with a login screen, even if I set up my computer to auto login.
but when I use the display port, when I managed to wake up the MAC, it bypasses the login screen.

Some updates on this. I tried two other 22" screen. Both of the seems to be working fine with sleep wake, but takes between 40 sec to one min to wake up after you typed something.
Topcon hdmi 22" screen
17 sec after keystrokes to turn wake screen
40 sec to wake computer
AOC hdmi 22" screen
19 sec after keystrokes to turn wake screen
38 sec to wake computer
I tried to switch to two other HDMI cables to see if it'll improve the situation of my original ASUS VX279 IPS HDMI screen.
But it didn't. Still never wakes up after it the MAC goes to sleep until you power cycle the screen.
I guess there is some hardware compatibility issue here.
Let me bring my mac mini to the shop to see if a replacement will help.

After Effects CC 2014 Graphics Card Issues?

I just updated to After Effects CC 2014 the other day and have been having issues with it accepting my graphics card.
I worked with AE CC before this with this card and haven't had any issues. The program will not use the graphics card for any ray traced rendering. The error message that I get at startup of after effects says "Ray Tracing on the GPU requires an approved NVIDIA graphics card and CUDA 5.0 or later." I have CUDA 6.0.37 installed
2013 15" Retina Macbook Pro
Intel i7
NVIDIA GeForce GT 750M 2GB
512GB SSD
Mac OS 10.10 "Yosemite"
AE CC 2014

This is what After Effects screen shows. Its weird because AE says that my driver version is 1.0, but its actually 6.0.37

Premiere CC 2014 - Magic Mouse issues?

I know most professionals might prefer not using Apple's Magic Mouse for professional applications, but I happen to kind-of like the mouse.
However, since using the latest version of Premiere CC 2014, I've noticed some very erratic behavior with the Magic Mouse. Click-dragging to move clips on my timeline doesn't always work. Sensitivity is delayed in zooming in on the timeline. Scrolling lags. Etc. etc.
Anyone else have any issues using the Magic Mouse? All my other non-Adobe applications seem to be working fine with this mouse, though I have notice some similar sensitivity issues with the mouse in Illustrator and InDesign.
I'm hoping there will just be a bug fix or something, as I've been having to resort to using a wired mouse, which is a clunky fix.

EXACT SAME THING HERE Can't find answer !!
drag and drop clip is ssssooooooooooooo frustrating !!
I have to use a usb mouse for premiere and magic mouse for e-mail and other stuff...
unacceptable !
I discovered that what makes it not to work is simply the horizontal scroll of the "middle button". if you click, start draging a clip and your finger move of half of 1mm, then it just end the move there... same for rectangle selection !
hate that !
I'm getting pain in the arm because I switch mouse all the time and they are obviously not the same speed and this change my work flow and lot of stuff ! This is a tiny problem causing huge problem !!

Edge 2014.1.1 Coordinated Preloading functionality is dead ?

Hello,
I used the versions of Edge prior to 2014.1.1 and i have see that the Coordinated Preloading functionality does not exist anymore.
This is a problem, I need to create a pause between the preloading and the play of slide.
Thanks

Hello this is the old guide od javascript API 3.0
Adobe Edge Animate CC JavaScript API
and this is the new guide
API JavaScript per Adobe Edge Animate CC
At the end of the old guide, you can see "Coordinated Preloading" and the AdobeEdge.loadResources(); AdobeEdge.playWhenReady(); commands.
I have use this tecnique.
I have create a slide that:
1- load itself and width the
<script> window.AdobeEdge = window.AdobeEdge || {}; window.AdobeEdge.bootstrapLoading = true; </script>
when it is loaded, it is in stand-by mode.
2- load others materials external from slide and, when load is finished, i call the command AdobeEdge.playWhenReady(); so, when the required assets and scripts are loaded the Edge slide can play
Thanks

Illustrator CC 2014 UI strange issues

Hello and sorry for my bad english! I'm having strange issues with Illustrator CC 2014 UI. Here are my specs:
Core i7980x
24GB DDR3 ram
Asus P6tDeluxe Mobo
Asus GTX 680 4GB
I'll post a grab to show what it looks like. It happens randomly while i'm working. Latest GPU drivers are installed and GPU performance is turned off (On doesn't change anything).
thank you for your time,
Roberto

Thank you so much for the reply ashtangakasha. I was thinking about a GPU driver issue, but i was in error, because i don't have the latest Nvidia driver installed. With new drivers the issue seem to be resolved.
Thank you again,have a nice day,
Roberto

In adobe edge 2014.0 video start in 2014.1.1 don't start

if i import video in version 2014.1.1 they don't show in all browser...also this code don't function in version 2014.1.1 but in 2014.0 yes
sym.$("videocontainer").children().remove();
var video = $("<video width='640' controls='controls' preload='none' autoplay='autoplay'>" +
    "<source src='video/v1.webm' type='video/webm' />" +
    "<source src='video/v1.mp4' type='video/mp4' />" +
    "<source src='video/v1.ogv' type='video/ogg' />" +
   "This browser is not compatible with HTML 5" +
"</video>"
sym.$("videocontainer").append(video);
i think it's a bug !

Did you use the Library > Video Panel to import the those three video types? If so then the source directory should be be 'media/.....'
The method you mention is 'old' and the latest Edge Animate handles Audio/ Video natively now, and you do not need to use the above. See here - http://layersmagazine.com/working-with-video-in-edge-animate.html
Darrell

Illustrator CC 2014 UI scaling issue

Hi. Why the new Adobe Illustrator CC (2014) show the toolbox and tool to much large in the screen. I have the two software install in my computer
Look the differences between the screen:
Thanks for the help if you know the problem.
MHCDESIGN

That really doesn't fix anything. My computer is already scaled to 125%, and everything else is properly scaled. Here is a side by side on-screen comparison (CC on the left, CC 2014 on the right, and text scaled to 125%). I was annoyed at first that CC 2014 didn't update and replace CC, but now I'm glad, because until this issue is resolved I won't be using CC 2014.

Dreamweaver 2014 (Windows) SFTP issue

I am experiencing a frustrating problem with Dreamweaver 2014 build 6733. I have several SFTP websites that work fine. But I have two or three that won't connect claiming that I am giving invalid username or password. The thing is that the credentials work fine in WinSCP ftp package, but not in Dreamweaver or Filezilla. Furthermore the same credentials work fine on Dreamweaver on a Mac, but do not work on another windows machine with Dreamweaver 2014. Another interesting thing is that I have several SFTP accounts on the SAME IP address that work fine in Dreamweaver on my machine...I just have a couple that won't work. I don't know why.
I am just wondering if anyone has any ideas for troubleshooting this? I did talk to Adobe tech support about it but since they were able to connect on their machine they didn't really have any helpful suggestions.

Hi EronC,
Please try the steps mentioned below:
Launch DW CC 2014
Go to menu “Site -> Manage Sites”
Double click the Site in question to open the “Site setup” dialog for that site
Click “Servers” on the left, then select the server and click the “Delete Server” button
Click the “Add new Server” button and enter the details manually
Click “Save”, and then click “Save” again
Click “Done”
Check if you still face any issues. If you do, please let us know.

Edge 2014.1 Replay issues

Similar Messages

Maybe you are looking for