EDI mapping for Shipment notice - SHPMNT05 to 940

Hi,
I had to map the SHPMNT05 IDOC to an EDI 940 structure. Was wondering if this is the right way to go for Shipment notices to Warehouses and if someone had a template for this particular mapping.
Thanks,
Karun.

Hi,
You can try this by making use of preceding-sibling and following-sibling axes in XSLT..after S, u can put a
<xsl:if test following-sibling::ns0:ReadDataFromOutput[ns0:segment='O']> and try same with rest of the segement.

Similar Messages

856 EDI mapping for G_SHL Segment

Hi Guys,
I have a question regarding the G_SHL segement mapping in DELVRY01.-- EDI856 scenario.
I have this mapping for other customer now i need to implement the same for new customer.
In that mapping they created 3 duplicalte G_SHL .
For 3rd G_SHL they created a UDF for generating ITEMS, PACKS, and their count by taking the inputs as E1EDL24 and TDLINE.
what is the need of these two inputs.
Regards,
Sandeep

I think TDLINE is just a free field to fill data as description and stuff like that, on the other hand the EDL24 contains all the position data and packing data
for example, if you have 2 positions in the delivery and they're packed in two packs, you would have 4 EDL24, the 2 positions and the 2 positions within the packs (maybe some reference to how the pack is done?) : (00001), (00002), (90001), (90002)
I think that's easier than to check for EDL37 and the sub EDL44 (Pack and Item segments)
but since the TDLINE can be used in many ways as reference you should probably check the logic and any document for that development
By the way, i was currently requesting in one of my questions how to create a UDF for the Pack, items structure, could you provide more info about that? thanks!

Edi mapping for 856

Hi,
can any one please map the below listed fields for edi 856..
Hierarchical Level
1)Hierarchical ID Number:
2)Hierarchical Parent ID Number:
3)Hierarchical Level Code:
4)Hierarchical Child Code:

I think TDLINE is just a free field to fill data as description and stuff like that, on the other hand the EDL24 contains all the position data and packing data
for example, if you have 2 positions in the delivery and they're packed in two packs, you would have 4 EDL24, the 2 positions and the 2 positions within the packs (maybe some reference to how the pack is done?) : (00001), (00002), (90001), (90002)
I think that's easier than to check for EDL37 and the sub EDL44 (Pack and Item segments)
but since the TDLINE can be used in many ways as reference you should probably check the logic and any document for that development
By the way, i was currently requesting in one of my questions how to create a UDF for the Pack, items structure, could you provide more info about that? thanks!

SAP MAPPING for EDI 857

Hi All,
I have to send EDI 857 Information from SAP. Could you please let me know which IDOC should i use to achieve the functionality. I appreciate if anybody can send me the mapping document of EDI 857 from SAP.
Thank You,
Suresh

Hi,
I have to send the Shipment/Billing Information and the triggering point is When we save the Shipment of the Delivery.. I am using SHPMNT03 IDOC for Shipment Details.. I am thinking of extending the SHPMNT03 IDOC for getting the billing details. Is this the right way for sending the Shipment/Billing Information to EDI 857 ?
Thank You,
Suresh

A/R process flow with notice of readiness for shipment

Hi,
I'm trying to implement the following A/R process flow:
- sales order
- xx% A/R down payment invoice
- notice of readiness for shipment
- incoming payment
- delivery
- A/R invoice (xx% down payment to be deducted here)
What's the best way to implement it?
Thanks
Fabio

Hi,
no, it's something different. It is because we want to be paid before shipping anything.
In more detail:
- we request a certain amount of down payment after the order and before starting production
- we request final payment before we deliver goods
Thanks
Fabio

Sender / Receiver ID mapping for EDI interfaces and Type of seeburger adapt

We need to set up a interface using Seeburger adapter for Purchase order IDOC to 850 EDI mapping.. After reading from SDN,
1) We can use the standard mapping in BIC MD to do E2X and X2E mapping..
2) We can use any of the AS2, EDI generic adapter, Seeburger FTP adapter or Seeburger SFTP adapter...
How do we decide which adapters should be chosen? I can see that it makes sense to use SFTP adapter or AS2 adapter for security...
Also how do we map Sender and Receiver IDs on the EDI message.. Should this be hardcoded as part of mapping or is there any facility in seeburger adapter to do this? I saw some references to Party Identifiers and not sure how it is used in setting up Sender/ Receiver ID
Also the graphical mapping to convert IDOC XML to EDI XML, Do we have standard mapping defined or do we need to create our own graphical mapping.

Hi Kris,
I had worked in the somehow same scenario, It was IDOC to EDIFACT file.
I can give you few clues which might be helpful
In BIC MD you have to create your own mapping if the standard mapping is not available (First check all the standard mappings in BIC). For your reference you need X2E mapping, as your scenario is IDOC to 850 EDI.
"the graphical mapping to convert IDOC XML to EDI XML, Do we have standard mapping defined or do we need to create our own graphical mapping."
In graphical mapping i created my own mapping, Seeburger has given some sample mappings you can check those for your reference (SEEBURGER_GENERIC_EDI software component). Mostly you have to create your own. You need a document from your functional consultant so that you are able to map correct fields and constants.
"how do we map Sender and Receiver IDs on the EDI message.. Should this be hardcoded as part of mapping or is there any facility in seeburger adapter to do this? I saw some references to Party Identifiers and not sure how it is used in setting up Sender/ Receiver ID"
This has been generally hardcoded in message mapping (In my case i hardcoded). If any of ur IDOC field contains that data you can map that field. But better Idea is ask your functional expert.
"How do we decide which adapters should be chosen? I can see that it makes sense to use SFTP adapter or AS2 adapter for security... "
You can choose adapter according to your requirement. In my case i used File adapter as i have to create file in PI server only. My suggestion you can use SFTP for seeburger
Hope these points are helpfu for u
Regards,
Shradha

Generating IDoc DDF structures for EDI mapping

Hello all,
I am looking for a way to generate IDoc DDF structures to use them in the EDI mapping in Gentran.
I was able to find one on ERPGenie.com (developed by Kevin Wilson) but it is only available for ECC 4.x. We are on ECC 6 and the program gives me an ABAP dump when I try to run it.
Does anyone have the fix for this code? Or perhaps another way to accomplish this task?
Actually, I am only interested in generating the MBGMCR02 IDoc
Thanks for your help
<REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Apr 7, 2008 12:36 PM

It's been a long time since I have done any IDOC processing.
Go to SE37 and enter the function module IDOC_INPUT_ORDERS. Display the source code. Search for "CALL CUSTOMER". You should see several "CALL CUSTOMER-FUNCTION" lines. These are enhancements where you can manipulate the IDOC data. If you locate the correct one (where the data is read from the IDOC but not yet validated), you should be able to map the partner function value. Double-clicking on the number in quotes will bring you to an "EXIT_" function module. A "ZX" INCLUDE program is referenced. If you haven't used the exit yet, double-clicking on the ZX INCLUDE will create it. The values passed into the function module are available in the INCLUDE.
Ideally, you should create a project in transaction CMOD that references the chosen enhancement. This way you can activate/deactivate without commenting/uncommenting the code in the INCLUDE.

Error in code page mapping for Source System

Hi All,
We are Loading data into BI system from MDM System.
It was loading fine but Yesterday we got an error " Error in code page mapping for Source System"
Message Class: RSDS_ACCESS 13.
We alreday tried to Search any IDOCs with error/unprocessed , but there isn't any.
Any pointers for this error will be Helpful.
Regards,
Mayank

Our SP currently SAPKW70019 , the SAP note mentioned above required to apply SP for 13, which we already beyond that...unfortunately we still face the same problem .. almost every day ..
any advice.. ?
Edited by: Edi Erwan Abu Talib on Jun 22, 2009 8:22 AM

Problem with Outbound EDI messages for shipping

Hi Experts,
we automatically generate the output SHAD (for shipment notification SHPADV) into the SD-transport.
We are facing the problem that sometimes the output works (green) and sometimes not (yellow).
When not, the status of the SHAD output is yellow and we can't find it into the VT70.
Any idea ?
PS: the SD-Transport has been generated into a Z-Programm and Batch Input.
With Regards,
David

Hi,
This could be the problem of confilting namespace or combinations.
in receive action just check that right message interface is configured at Inbound side.
just check any place void ?
1)just check the name as case sensitive.
2)Just check is there interface belongs to right software component.
3)Just check mapping assigned to the right combination or not.
its better to cross check all the component are assigned to right place or not.
****if helpful then rewards points
Regards,
Sumit Gupta

PI EDI help: What is the source of ISA13 in a IDOC to EDI mapping

Hello Experts,
It would be of great help if you can provide the field mapping for ISA 13 in outbound from IDOC sceanrio:
IDOC: INVOIC02 - to - EDI 810 mapping.
Is it the best practice to have ECC send the value in a particular IDOC field ( like RFINT) or PI has to use a custom function to populate the ISA13 field.?
Thank you,
Patrick.

Hi,
ISA13 is for Interchange Control Number. It is a control number assigned by the interchange sender.
Normally its Sequential number starting with 000000001 and incremented by 1 for each subsequent ISA between sender and receiver.
This is a very useful value to include. It creates an explicit link between the IDoc and the EDI transmission. This number eases Production Support greatly. When there's an issue with a Partner EDI transmission, the Partner's EDI support people want to know the Interchange Control Number
The IDoc interface does not process or check this field.
regards
Ganga

Seeburger BIC mapping for 4030

Hi,
I have created a new mapping for ANSI X12 4030 using Seeburger Mapping designer. While converting from XML to EDI ANSI format the number included segments in the segment "SE" is calculated, does anyone know where this value will be calculated for 4010 version. so that i can incorprate the same for 4030 version
With Regards
K.Varadharajan

Hi,
SE indicate the starting of a Segment.Check below links for seeburger.
Please see the below blogs
/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
/people/william.li/blog/2006/03/17/how-to-get-started-using-conversion-agent-from-itemfield
/people/paul.medaille/blog/2005/11/17/more-on-the-sap-conversion-agent-by-itemfield
http://www.stylusstudio.com/edi/XML_to_X12.html
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b0b355ae-0501-0010-3b83-8f2bb566fa47
Details on XI EDI adapter from seeburger
Check this for Conversions-
/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
SAP Adapters
EDI with XI
http://www.seeburger.com
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/SEEBURGER_SAP_Adapter_engl.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
http://www.seeburger.com
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/SEEBURGER_SAP_Adapter_engl.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
Regards,
Phani
Reward points if Helpful

Pre-Order but still "Prepared for Shipment"?

I noticed a lot of people getting their shipments early.
I ordered mine around 7pm on 6/15. I barely made the cutoff for the 6/24 shipment. My order still says, "Prepared for Shipment" with delivery on 6/24.
Anyone else in the same boat? I hope they ship it soon...doesn't it come from like China? If they don't ship it soon, what are the chances it will actually come on the 24th?

I ordered mine at 7:30 in Utah and received an email this morning saying I would get mine tomorrow. According to the Fedex site, it is in the sort center in my state. I am so excited. Have faith and hope that everything will work out fine. As the song goes, "Every little thing's gonna be alright.".

IDOC EDI mapping ..

hi,
Please let me know if my understanding is correct. In SAP EDI setup two people involved, ABAP programmer who customzes the IDOCS, sets up the EDI setup on SAP side like number ranges, partner profiles, condition records, message control etc and monitors the IDOC status till it is transmitted to the EDI subsystem and also the IDOCs received at SAP end.
The other person is an EDI specialist who will map the IDOCs to the EDI doc set based on trading partner requirements in the EDI subsystem.
So the ABAP deveoper need not know anything about the mapping done at EDI subsystem ?? His job is only at the SAP end ?? Am I right ??
thanks
Edited by: sdnuser1 sdnsurname on Mar 20, 2008 6:03 AM

Hi,
Ur assumptions are correct up to some extent...
What will happen SAP EDI implementation proejcts is most of the times it is the SAP technical people responsibility to do the EDI mapping also.
So an ABAPer with EDI knowledege(ABAP/EDI consultant) will take care of SAP EDI settings at SAP side and he/she will develop the mapping document and hand over the same to EDI sybsystem provider.
EDI subsystem people will feed the mapping instructions into EDI subsystem based on ur mapping document.Core EDI people will not understand the SAP terminology and as ABAP/EDI consultant will take of both settings.For an ABAP/EDI consultant also will not be given full access of EDI subsystem and u will only hand over the mapping docuemnt(IDOC segments to EDI standards mapping ) and they will feed the instructiona and get back 2 u for any doubts..
Hope this help.Let me know if u need any help for further understanding..
Rward if helpfulll
ramesh

EDI Mapping

Hi,
As my client is implementing EDI through a trusted link, they had asked me to take care of the mapping section along with the development of interfaces.
As generally the middleware or translator people would do the mapping processes, it is totally new for me.
Please advise me in this regard where to start and what is the my job into this.
Do i have to map the incoming or outgoing edi standards to idoc segments.
If so, what are the all things i need to know and do.
As i have ample time, it would be nice for a quick start into it.
Please help me in this regard.
Thanks in advance,
Anandh.B
Points would be awarded for everyone ............

Anandha,
As you mentioned, EDI mapping is typically done using a middleware tool or EDI Translator. Are they asking you to do mapping in ABAP or is there another tool you are going to use?
If you are going to write ABAP programs to do your mapping you have a big challenge ahead of you. You will need to become familiar with whatever EDI standards you will be mapping from. These standards will have the layout of the messages that you will receive.
If you are going to code all of this in ABAP you don't necessarily have to go to IDOCs however it can be very helpful when loading data. By using SAP's IDOC technology and processing you have better traceability into the transaction posting in your system.
In general this is what you will probably need to know:
1. Which EDI messages you will need to translate
2. Which IDOC types those messages correspond with
3. The structures of both the EDI messages and IDOCs
4. Setup of SAP IDOC system. (Execute area menu WEDI from the main screen in SAP)
5. Set up of the application data for IDOC processing - particularly in the outbound - which partners will be recieving which messages
I am sure there is a lot more but this will hopefully get you started.
Chris

Output determination for shipment types

Hi SD gurus,
I am new to SAP. I am unable to configure o/p for shipment documents. I wanted to send an EDI to carrier when my planning is done and email to customers when loading takes place. an some1 help me through this.
Thanks in advance.

Dear VGR,
Do the configuration settings for the shipment output determination through this IMG path
IMG>Logistics Execution>Transportation>Basic Transportation Functions>Output Control-->Maintain Output Determination for Shipments
-->Maintain Condition Tables
-->Maintain Output Types
-->Maintain Access Sequences
-->Assign Output Types To Partner Functions
-->Maintain Output Determination Procedure
-->Assign Output Determination Procedures
I wanted to send an EDI to carrier when my planning is done and email to customers when loading takes place.
For he above requirement you take help of ABAPer to develop the output program in such way and assign that program to your shipment output type.
Maintain the condition records through VV71 transaction with Transm. Medium EDI and Email
I hope this will help you,
Regards,
Murali.

EDI mapping for Shipment notice - SHPMNT05 to 940

Similar Messages

Maybe you are looking for