PI EDI help: What is the source of ISA13 in a IDOC to EDI mapping
Hello Experts,
It would be of great help if you can provide the field mapping for ISA 13 in outbound from IDOC sceanrio:
IDOC: INVOIC02 - to - EDI 810 mapping.
Is it the best practice to have ECC send the value in a particular IDOC field ( like RFINT) or PI has to use a custom function to populate the ISA13 field.?
Thank you,
Patrick.
Hi,
ISA13 is for Interchange Control Number. It is a control number assigned by the interchange sender.
Normally its Sequential number starting with 000000001 and incremented by 1 for each subsequent ISA between sender and receiver.
This is a very useful value to include. It creates an explicit link between the IDoc and the EDI transmission. This number eases Production Support greatly. When there's an issue with a Partner EDI transmission, the Partner's EDI support people want to know the Interchange Control Number
The IDoc interface does not process or check this field.
regards
Ganga
Similar Messages
-
Q1:What is the source of the contact list when I logged in my icloud-from the contact list that I stored in my card or the iphone?
Q2:One more thing,when I logged in the icloud with my account ID and password,how can I get another iphone user's contact list in my icloud "contacts".I once used the iphone user 's phone to log in my icloud to get my lost phone,is it normal or unnormal to have this contact list from other?Why can it happened?bah, you're right, they can't be seen there.
But if you want to clear them... How to clear the Local Calendar and Local Contacts databases on the BlackBerry 10 smartphone
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
What are the sources system will pick the document type while creating invo
hi
I would like to know how system will pickup the doucment type while creating invoice in vf01.
i have taken off the fields f1, f2, from the document type. in billing sub tab. so The moment when am creating billing system automatically displaying F2 invoice doucment creation. What are the sources for this.
thanks & Regards
Rack129Hi,
Hope you have maintained u2018Delivery relevant billing type F2u2019 and u2018Order relevant billing type F1u2019 in the billing tab of the Sales document type in VOV8.
If you create delivery related billing, the system will pick F2. This is controlled in Item category (VOV7). Billing relevance in Business data of Item category decides whether this is delivery related or order related. u2018Au2019 for delivery related billing; u2018Bu2019 for order related billing and so on.
Item category is determined by this combination: Sales document type + Item cat group + usage + higher level item cat.
Regards,
K Bharathi -
I am trying to listen BBC radio news from BBC App, but on pressing the button "live radio" I always get the error "there was an error playing this radio feed". What is the source of this error and how can I remove it?
That is probably just a generic error message and you might not ever know what is causing it. Assuming that you have been able to play live radio with the app in the past (I know nothing about the app) and assuming that all other Internet related functions (Safari, email, etc.) are working properly on your iPad, quit the app completely and reboot your iPad.
Go to the home screen first by tapping the home button. Double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
If that fails to resolve the issue, you might want to reboot your router, unplug it for about 30 seconds and then plug it in again. -
I Need Help to Access The Source Code From A Form to Know the Calculation Formula
Hi,
I Need Help to Access The Source Code From A Form to Know the Calculation Formula. The application is a windows form application that is linked to SQL Server 2008. In one of the application forms it generates an invoice and does some calculations. I just
need to know where behind that form is the code that's doing the calculations to generate the invoice, I just need to get into the formula that's doing these calculations.
Thank you so much.Hi,
Thanks for the reply. This is a view and [AmountDue] is supposed to be [CurrentDueAmount] + [PastDueAmount] - [PaidAmount]. The view is not calculating [PaidAmount] right . Below is the complete code of the view. Do you see anything wrong in the code ?
Thanks.
SELECT [isi].[InvoiceID], [ii].[DueDate], [SubInvoiceID] = [isi].[ID], [INV_FacilityID] = [if].[ID], [if].[FacilityID],
[iff].[FacilityFeeID], [LoanID] = NULL, [isi].[PortfolioID], [isi].[Portfolio],
[PaymentType] = [isis_fee].[SectionType], [Name]
= [iff].[Name], [ReceivedAmount], [dates].[CurrentDueAmount],
[PastDueAmount] = CASE WHEN ISNULL([ReceivedAmount],
0) > 0 THEN [pastdue].[PastDueFeeAmount] + ISNULL([ReceivedAmount], 0)
WHEN ISNULL([ReceivedAmount], 0)
< 0 THEN /* We bring past due to zero and
apply reset to current. */ CASE WHEN [pastdue].[PastDueFeeAmount] + ISNULL([ReceivedAmount], 0)
< 0 THEN 0 ELSE [pastdue].[PastDueFeeAmount]
+ ISNULL([ReceivedAmount], 0) END WHEN ISNULL([ReceivedAmount], 0) = 0 AND
[pastdue].[PastDueFeeAmount] < 0 THEN 0 ELSE
[pastdue].[PastDueFeeAmount] END, [PaidAmount] = CASE WHEN ISNULL([ReceivedAmount], 0)
< 0 THEN /* We bring past due to zero and
apply rest to current. */ CASE WHEN [pastdue].[PastDueFeeAmount] + ISNULL([ReceivedAmount], 0)
< 0 THEN - ([pastdue].[PastDueFeeAmount]
+ ISNULL([ReceivedAmount], 0)) ELSE 0 END WHEN ISNULL([ReceivedAmount], 0) = 0 AND
[pastdue].[PastDueFeeAmount] < 0 THEN - [pastdue].[PastDueFeeAmount]
ELSE 0 END, [AmountDue] = [unpaid].[UnpaidFeeAmount], [ID] = [iff].[FacilityFeeID]
FROM [dbo].[INV_SubInvoice] isi JOIN
[dbo].[INV_Invoice] ii ON [isi].[InvoiceID]
= [ii].[ID] JOIN
[dbo].[INV_Facility] [if] ON [isi].[ID] = [if].[SubInvoiceID]
JOIN
[dbo].[INV_FacilityFee] iff ON [if].[ID] = [iff].[INV_FacilityID]
JOIN
(SELECT [sis_fee].[ID],
[sis_fee].[SectionTypeCode], [SectionType] = [st_fee].[Name], [sis_fee].[INV_FacilityFeeID]
FROM
[dbo].[INV_SubInvoiceSection] sis_fee JOIN
[dbo].[INV_SectionType] st_fee ON [sis_fee].[SectionTypeCode] = [st_fee].[Code]
WHERE [INV_FacilityFeeID]
IS NOT NULL AND [StatusCode] = 'BILL') isis_fee ON [iff].[ID] = [isis_fee].[INV_FacilityFeeID] JOIN
(SELECT [iffa].[SectionID],
[AccrualDeterminationDateMax] = MAX([iffa].[AccrualDeterminationDate]),
[AccrualDeterminationDateMin] = MIN([iffa].[AccrualDeterminationDate]), [CurrentDueAmount] = SUM([iffa].[AccruedFeeAmount]),
[ReceivedAmount] = SUM([iffa].[ReceivedFeeAmount])
FROM
[dbo].[INV_FacilityFeeAccrual] iffa
GROUP BY [iffa].[SectionID])
dates ON [isis_fee].[ID] = [dates].[SectionID] LEFT JOIN
(SELECT *
FROM
[dbo].[INV_FacilityFeeAccrual]) unpaid ON [dates].[SectionID] = [unpaid].[SectionID] AND
[dates].[AccrualDeterminationDateMax] = [unpaid].[AccrualDeterminationDate]
LEFT JOIN
(SELECT [SectionID],
[PastDueFeeAmount] = SUM([PastDueFeeAmount])
FROM
[dbo].[INV_FacilityFeeAccrual]
GROUP BY [SectionID]) pastdue
ON [dates].[SectionID] = [pastdue].[SectionID]
UNION
SELECT [isi].[InvoiceID], [ii].[DueDate], [SubInvoiceID] = [isi].[ID], [INV_FacilityID] = [if].[ID], [if].[FacilityID],
[FacilityFeeID] = NULL, [il].[LoanID], [isi].[PortfolioID], [isi].[Portfolio],
[PaymentType] = [isis_loan].[SectionType], [Name]
= [il].[Name], [ReceivedAmount], [CurrentDueAmount], [PastDueAmount] = CASE WHEN ISNULL([ReceivedAmount],
0) > 0 THEN [PastDueAmount] + ISNULL([ReceivedAmount],
0) WHEN ISNULL([ReceivedAmount], 0)
< 0 THEN /* We bring past due to zero and
apply rest to current. */ CASE WHEN [PastDueAmount] + ISNULL([ReceivedAmount], 0)
< 0 THEN 0 ELSE [PastDueAmount] + ISNULL([ReceivedAmount],
0) END WHEN ISNULL([ReceivedAmount], 0) = 0 AND
[PastDueAmount] < 0 THEN 0 ELSE [PastDueAmount]
END,
[PaidAmount] = CASE WHEN [isis_loan].[SectionTypeCode]
= 'LOAN_PRIN' THEN 0 ELSE CASE WHEN ISNULL([ReceivedAmount], 0)
< 0 THEN /* We bring past due to zero and
apply rest to current. */ CASE WHEN [PastDueAmount] + ISNULL([ReceivedAmount], 0)
< 0 THEN - ([PastDueAmount] + ISNULL([ReceivedAmount],
0)) ELSE 0 END WHEN ISNULL([ReceivedAmount], 0) = 0 AND
[PastDueAmount] < 0 THEN - [PastDueAmount]
ELSE 0 END END,
[AmountDue] = CASE WHEN [isis_loan].[SectionTypeCode]
= 'LOAN_PRIN' THEN [CurrentDueAmount] ELSE [unpaid].[AmountDue] END, [ID] = [il].[LoanID]
FROM [dbo].[INV_SubInvoice] isi JOIN
[dbo].[INV_Invoice] ii ON [isi].[InvoiceID]
= [ii].[ID] JOIN
[dbo].[INV_Facility] [if] ON [isi].[ID] = [if].[SubInvoiceID]
JOIN
[dbo].[INV_Loan] il ON [if].[ID] = [il].[INV_FacilityID]
JOIN
(SELECT [sis_loan].[ID],
[sis_loan].[SectionTypeCode], [SectionType] = [st_loan].[Name], [sis_loan].[INV_LoanID]
FROM
[dbo].[INV_SubInvoiceSection] sis_loan JOIN
[dbo].[INV_SectionType] st_loan ON [sis_loan].[SectionTypeCode] = [st_loan].[Code]
WHERE [INV_LoanID]
IS NOT NULL AND [StatusCode] = 'BILL') isis_loan ON [il].[ID] = [isis_loan].[INV_LoanID] JOIN
(SELECT [iffa].[SectionID],
[AccrualDeterminationDateMax] = MAX([iffa].[AccrualDeterminationDate]),
[AccrualDeterminationDateMin] = MIN([iffa].[AccrualDeterminationDate]), [CurrentDueAmount] = SUM([iffa].[ExpectedPrincipalAmount]),
[ReceivedAmount] = SUM([ReceivedPrincipalAmount])
FROM
[dbo].[INV_LoanPrincipalAmortization] iffa
GROUP BY [iffa].[SectionID]
UNION
SELECT [iffa].[SectionID],
[AccrualDeterminationDateMax] = MAX([iffa].[AccrualDeterminationDate]),
[AccrualDeterminationDateMin] = MIN([iffa].[AccrualDeterminationDate]), [CurrentDueAmount] = SUM([iffa].[AccruedInterestAmount]),
[ReceivedAmount] = SUM([ReceivedInterestAmount])
FROM
[dbo].[INV_LoanCashInterestAccrual] iffa
GROUP BY [iffa].[SectionID]
UNION
SELECT [iffa].[SectionID],
[AccrualDeterminationDateMax] = MAX([iffa].[AccrualDeterminationDate]),
[AccrualDeterminationDateMin] = MIN([iffa].[AccrualDeterminationDate]), [CurrentDueAmount] = SUM([iffa].[AccruedInterestAmount]),
[ReceivedAmount] = SUM([ReceivedInterestAmount])
FROM
[dbo].[INV_LoanPIKInterestAccrual] iffa
GROUP BY [iffa].[SectionID])
dates ON [isis_loan].[ID] = [dates].[SectionID] LEFT JOIN
(SELECT [AmountDue]
= [UnpaidPrincipalAmount], [SectionID], [AccrualDeterminationDate]
FROM
[dbo].[INV_LoanPrincipalAmortization]
UNION
SELECT [AmountDue]
= [UnpaidInterestAmount], [SectionID], [AccrualDeterminationDate]
FROM
[dbo].[INV_LoanCashInterestAccrual]
UNION
SELECT [AmountDue]
= [UnpaidInterestAmount], [SectionID], [AccrualDeterminationDate]
FROM
[dbo].[INV_LoanPIKInterestAccrual]) unpaid ON [dates].[SectionID] = [unpaid].[SectionID] AND
[dates].[AccrualDeterminationDateMax] = [unpaid].[AccrualDeterminationDate]
LEFT JOIN
(SELECT [PastDueAmount]
= SUM([PastDuePrincipalAmount]), [SectionID]
FROM
[dbo].[INV_LoanPrincipalAmortization]
GROUP BY [SectionID]
UNION
SELECT [PastDueAmount]
= SUM([PastDueInterestAmount]), [SectionID]
FROM
[dbo].[INV_LoanCashInterestAccrual]
GROUP BY [SectionID]
UNION
SELECT [PastDueAmount]
= SUM([PastDueInterestAmount]), [SectionID]
FROM
[dbo].[INV_LoanPIKInterestAccrual]
GROUP BY [SectionID]) pastdue
ON [dates].[SectionID] = [pastdue].[SectionID]
UNION
SELECT [isi].[InvoiceID], [ii].[DueDate], [SubInvoiceID] = [isi].[ID], [INV_FacilityID] = [if].[ID], [if].[FacilityID],
[FacilityFeeID] = NULL, [il].[LoanID], [isi].[PortfolioID], [isi].[Portfolio],
[PaymentType] = 'PIK Interest Applied', [Name]
= [il].[Name], [ReceivedAmount], [CurrentDueAmount] = - [dates].[CurrentDueAmount],
[PastDueAmount] = - CASE WHEN ISNULL([ReceivedAmount],
0) > 0 THEN [PastDueAmount] + ISNULL([ReceivedAmount], 0) WHEN ISNULL([ReceivedAmount], 0)
< 0 THEN /* We bring past due to zero and
apply rest to current. */ CASE WHEN [PastDueAmount] + ISNULL([ReceivedAmount], 0)
< 0 THEN 0 ELSE [PastDueAmount] + ISNULL([ReceivedAmount],
0) END WHEN ISNULL([ReceivedAmount], 0) = 0 AND
[PastDueAmount] < 0 THEN 0 ELSE [PastDueAmount]
END, [PaidAmount] = - CASE WHEN ISNULL([ReceivedAmount], 0)
< 0 THEN /* We bring past due to zero and
apply rest to current. */ CASE WHEN [PastDueAmount] + ISNULL([ReceivedAmount], 0)
< 0 THEN - ([PastDueAmount] + ISNULL([ReceivedAmount],
0)) ELSE 0 END WHEN ISNULL([ReceivedAmount], 0) = 0 AND
[PastDueAmount] < 0 THEN - [PastDueAmount]
ELSE 0 END, [AmountDue] = - [AmountDue], [ID] = [il].[LoanID]
FROM [dbo].[INV_SubInvoice] isi JOIN
[dbo].[INV_Invoice] ii ON [isi].[InvoiceID]
= [ii].[ID] JOIN
[dbo].[INV_Facility] [if] ON [isi].[ID] = [if].[SubInvoiceID]
JOIN
[dbo].[INV_Loan] il ON [if].[ID] = [il].[INV_FacilityID]
JOIN
(SELECT [sis_loan].[ID],
[sis_loan].[SectionTypeCode], [SectionType] = [st_loan].[Name], [sis_loan].[INV_LoanID]
FROM
[dbo].[INV_SubInvoiceSection] sis_loan JOIN
[dbo].[INV_SectionType] st_loan ON [sis_loan].[SectionTypeCode] = [st_loan].[Code]
WHERE [INV_LoanID]
IS NOT NULL AND [StatusCode] = 'BILL' AND [sis_loan].[SectionTypeCode] = 'LOAN_INT_PIK') isis_loan ON
[il].[ID] = [isis_loan].[INV_LoanID] JOIN
(SELECT [iffa].[SectionID],
[AccrualDeterminationDateMax] = MAX([iffa].[AccrualDeterminationDate]),
[AccrualDeterminationDateMin] = MIN([iffa].[AccrualDeterminationDate]), [CurrentDueAmount] = SUM([iffa].[AccruedInterestAmount]),
[ReceivedAmount] = SUM([ReceivedInterestAmount])
FROM
[dbo].[INV_LoanPIKInterestAccrual] iffa
GROUP BY [iffa].[SectionID])
dates ON [isis_loan].[ID] = [dates].[SectionID] LEFT JOIN
(SELECT [AmountDue]
= [UnpaidInterestAmount], [SectionID], [AccrualDeterminationDate]
FROM
[dbo].[INV_LoanPIKInterestAccrual]) unpaid ON [dates].[SectionID] = [unpaid].[SectionID] AND
[dates].[AccrualDeterminationDateMax] = [unpaid].[AccrualDeterminationDate]
LEFT JOIN
(SELECT [PastDueAmount]
= SUM([PastDueInterestAmount]), [SectionID]
FROM
[dbo].[INV_LoanPIKInterestAccrual]
GROUP BY [SectionID]) pastdue
ON [dates].[SectionID] = [pastdue].[SectionID] -
What is the source table for repository browser info?
Hi guys,
I need to create report for everyday's data refresh, mostly like what repository browser does. So what is the source table for repository browser info? I am in OWB 10gR2. Thanks a lot.I believe the runtime audit browser uses the views that start with "RAB" in the control center.
But it would probably better if you used the Audit Execution views. More information can be found in the "API and Scripting Reference" document...
http://download.oracle.com/docs/cd/B31080_01/doc/owb.102/b28225/api_2runviews.htm
In order to get access to the Public views from SQL Plus using a schema other than the control center, I believe you need to grant the ACCESS_PUBLICVIEW_BROWSER sys privilege to each OWB user. Look at Note:434718.1 for more information. -
Help what is the minimum requirement to install fusion application ?
help what is the minimum requirement to install fusion application ?
Know more from this link.
http://www.oracle.com/technetwork/middleware/ias/downloads/fusion-certification-100350.html
Regards,
Kal -
Kernal Panics? What is the source?
I have had kernal panics every few hours on my early 2011 Macbook Pro 15.
Here is the information from the latest crash. I dont know what this information means, could someone please decipher it for me?
What is the source of my issue?
Interval Since Last Panic Report: 41694 sec
Panics Since Last Report: 2
Anonymous UUID: D4B9FCA8-2A5E-9E2D-671D-B7B2BF78D451
Sat Mar 2 22:33:15 2013
panic(cpu 6 caller 0xffffff80212b7bd5): Kernel trap at 0xffffff80212aca37, type 13=general protection, registers:
CR0: 0x000000008001003b, CR2: 0x000000010a25f000, CR3: 0x0000000023c32000, CR4: 0x00000000000606e0
RAX: 0xffffff8034227a48, RBX: 0xbfffff8034a6b200, RCX: 0x0000000009000000, RDX: 0xbfffff8034a6b200
RSP: 0xffffff8112653dc0, RBP: 0xffffff8112653dc0, RSI: 0xffffff810b545400, RDI: 0xbfffff8034a6b200
R8: 0x0000000000000001, R9: 0x0000000000000000, R10: 0x000000004876940e, R11: 0x0000000000000246
R12: 0x0000000000000001, R13: 0xffffff810b545400, R14: 0x000000000000059a, R15: 0xffffff8034a6aa18
RFL: 0x0000000000010286, RIP: 0xffffff80212aca37, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x000000010a25f000, Error code: 0x0000000000000000, Fault CPU: 0x6
Backtrace (CPU 6), Frame : Return Address
0xffffff8112653a60 : 0xffffff802121d626
0xffffff8112653ad0 : 0xffffff80212b7bd5
0xffffff8112653ca0 : 0xffffff80212ce4ed
0xffffff8112653cc0 : 0xffffff80212aca37
0xffffff8112653dc0 : 0xffffff8021338983
0xffffff8112653e30 : 0xffffff7fa1a025e9
0xffffff8112653e80 : 0xffffff7fa20b1e73
0xffffff8112653ea0 : 0xffffff7fa20b082d
0xffffff8112653ec0 : 0xffffff7fa20b55f6
0xffffff8112653ef0 : 0xffffff80216472a8
0xffffff8112653f30 : 0xffffff8021645daa
0xffffff8112653f80 : 0xffffff8021645ed9
0xffffff8112653fb0 : 0xffffff80212b26b7
Kernel Extensions in backtrace:
com.apple.iokit.IONetworkingFamily(3.0)[28575328-A798-34B3-BD84-D708138EBD17]@0 xffffff7fa19f8000->0xffffff7fa1a22fff
com.apple.driver.AirPort.Brcm4331(602.15.22)[5BDCA43F-AD42-3F05-BCCF-BC364D17E1 5F]@0xffffff7fa20a8000->0xffffff7fa2299fff
dependency: com.apple.iokit.IOPCIFamily(2.7.2)[B1B77B26-7984-302F-BA8E-544DD3D75E73]@0xffff ff7fa18af000
dependency: com.apple.iokit.IO80211Family(500.15)[4282DF5A-86B9-3213-B9B1-675FAD842A94]@0xf fffff7fa203c000
dependency: com.apple.iokit.IONetworkingFamily(3.0)[28575328-A798-34B3-BD84-D708138EBD17]@0 xffffff7fa19f8000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
12C60
Kernel version:
Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
Kernel slide: 0x0000000021000000
Kernel text base: 0xffffff8021200000
System model name: MacBookPro8,2 (Mac-94245A3940C91C80)
System uptime in nanoseconds: 17563471862500
last loaded kext at 666265828064: com.apple.filesystems.smbfs 1.8 (addr 0xffffff7fa3577000, size 229376)
last unloaded kext at 144513332213: com.apple.driver.AppleUSBUHCI 5.2.5 (addr 0xffffff7fa1b76000, size 65536)
loaded kexts:
com.apple.filesystems.smbfs 1.8
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AudioAUUC 1.60
com.apple.iokit.IOBluetoothSerialManager 4.0.9f33
com.apple.driver.AGPM 100.12.69
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleUpstreamUserClient 3.5.10
com.apple.driver.AppleHDA 2.3.1f2
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.kext.AMDFramebuffer 8.0.0
com.apple.driver.AppleIntelHD3000Graphics 8.0.0
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport 4.0.9f33
com.apple.driver.AppleMikeyDriver 2.3.1f2
com.apple.AMDRadeonAccelerator 1.0.0
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.AppleSMCLMU 2.0.2d0
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.driver.AppleMuxControl 3.2.11
com.apple.driver.ApplePolicyControl 3.2.11
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleIntelSNBGraphicsFB 8.0.0
com.apple.driver.SMCMotionSensor 3.0.2d6
com.apple.driver.AppleUSBTCButtons 235.4
com.apple.driver.AppleUSBTCKeyboard 235.4
com.apple.driver.AppleIRController 320.15
com.apple.iokit.SCSITaskUserClient 3.5.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.2.2
com.apple.driver.AppleUSBHub 5.2.5
com.apple.driver.AppleSDXC 1.2.2
com.apple.iokit.AppleBCM5701Ethernet 3.2.5b3
com.apple.driver.AppleFWOHCI 4.9.6
com.apple.driver.AirPort.Brcm4331 602.15.22
com.apple.driver.AppleAHCIPort 2.4.1
com.apple.driver.AppleUSBEHCI 5.4.0
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleACPIButtons 1.6
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.6
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0
com.apple.driver.AppleIntelCPUPowerManagement 196.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2
com.apple.iokit.IOSerialFamily 10.0.6
com.apple.kext.triggers 1.0
com.apple.driver.DspFuncLib 2.3.1f2
com.apple.iokit.IOAudioFamily 1.8.9fc10
com.apple.kext.OSvKernDSPLib 1.6
com.apple.iokit.IOSurface 86.0.3
com.apple.iokit.IOBluetoothFamily 4.0.9f33
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport 4.0.9f33
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.iokit.IOAcceleratorFamily 19.0.26
com.apple.driver.AppleHDAController 2.3.1f2
com.apple.iokit.IOHDAFamily 2.3.1f2
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.AppleGraphicsControl 3.2.11
com.apple.iokit.IONDRVSupport 2.3.5
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.2.0d16
com.apple.kext.AMD6000Controller 8.0.0
com.apple.kext.AMDSupport 8.0.0
com.apple.iokit.IOGraphicsFamily 2.3.5
com.apple.driver.AppleSMC 3.1.4d2
com.apple.driver.AppleThunderboltDPInAdapter 1.8.5
com.apple.driver.AppleThunderboltDPAdapterFamily 1.8.5
com.apple.driver.AppleThunderboltPCIDownAdapter 1.2.5
com.apple.driver.AppleUSBMultitouch 235.7
com.apple.iokit.IOUSBHIDDriver 5.2.5
com.apple.driver.AppleUSBMergeNub 5.2.5
com.apple.driver.AppleUSBComposite 5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.1
com.apple.driver.AppleThunderboltNHI 1.6.0
com.apple.iokit.IOThunderboltFamily 2.1.1
com.apple.iokit.IOUSBUserClient 5.2.5
com.apple.iokit.IOEthernetAVBController 1.0.2b1
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IO80211Family 500.15
com.apple.iokit.IONetworkingFamily 3.0
com.apple.iokit.IOAHCIFamily 2.2.1
com.apple.iokit.IOUSBFamily 5.4.0
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.8.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.driver.DiskImages 344
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.21
com.apple.security.sandbox 220
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleACPIPlatform 1.6
com.apple.iokit.IOPCIFamily 2.7.2
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
Model: MacBookPro8,2, BootROM MBP81.0047.B27, 4 processors, Intel Core i7, 2.2 GHz, 8 GB, SMC 1.69f4
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 512 MB
Graphics: AMD Radeon HD 6750M, AMD Radeon HD 6750M, PCIe, 1024 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1600 MHz, 0x04CB, 0x202020202020202020202020202020202020
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1600 MHz, 0x04CB, 0x202020202020202020202020202020202020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 ()
Bluetooth: Version 4.0.9f33 10885, 2 service, 11 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: Hitachi HTS725050A9A362, 500.11 GB
Serial ATA Device: MATSHITADVD-R UJ-898
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8509, 0xfa200000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2513, 0xfa100000 / 2
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0252, 0xfa120000 / 5
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x821a, 0xfa113000 / 6
USB Device: hub_device, 0x0424 (SMSC), 0x2513, 0xfd100000 / 2
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd110000 / 3That panic was not caused by third-party software. If the problem is recurrent, the possibilities are:
A damaged OS X installation
A fault in a peripheral device, if any
Corrupt non-volatile memory (NVRAM)
An internal hardware fault
An obscure bug in OS X
You can rule out the first two possibilities by reinstalling the OS and testing with non-essential peripherals disconnected and aftermarket expansion cards removed, if applicable. Sometimes a clean reinstallation (after erasing the startup volume) may solve a problem that isn't solved by reinstalling in place, without erasing.
Corrupt NVRAM, which rarely causes panics, can be ruled out by resetting it as directed in this support article.
If you've recently upgraded the memory, reinstall the original memory and see whether there's any improvement. Be careful not to touch the gold contacts on the memory modules when handling them. If necessary, clean them with a mild solvent such as rubbing alcohol.
The Apple Hardware Test, though generally unreliable, will sometimes detect a fault. A negative test can't be depended on. Run the extended version of the test.
In the category of obscure bugs, reports suggest that FileVault may trigger kernel traps under some unknown conditions. Most, though not all, of these reports seem to involve booting from an aftermarket SSD. If those conditions apply to you, try deactivating FileVault.
If none of the above applies, make a "Genius" appointment at an Apple Store to have the machine tested. You may have to leave it there for several days. There isn't much point in doing this unless you can reproduce the panic, or if you can't, it happens often enough that it's likely to be repeated at the store. Otherwise you may be told that nothing is wrong.
Print the first page of the panic report and bring it with you.
Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you know how to restore, and you have at least two independent backups.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
*An SSD doesn't need to be zeroed. -
What is the source file structure while doing the BDC of mm01
What is the source file structure while doing the BDC of mm01
Hi,
first u create a meterial note the data u enterd in the screens.
if u have created the material successfully then that data structure will be the source structure of the
file.
regards.
Jagadeesh. -
What are the Tcodes commanly used in ALE-IDOCs?
Hi,
What are the Tcodes commanly used in ALE-IDOCs?
Regards,
Chow.Hi,
Go through the following Tcode for ALE
ALE IDOC
Sending System(Outbound ALE Process)
Tcode SALE ? for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ? Create Model View
Tcode BD82 ? Generate partner Profiles & Create Ports
Tcode BD64 ? Distribute the Model view
Message Type MATMAS
Tcode BD10 ? Send Material Data
Tcode WE05 ? Idoc List for watching any Errors
Receiving System(Inbound ALE )
Tcode SALE ? for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ? Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 ? Idoc List for inbound status codes
ALE IDOC Steps
Sending System(Outbound ALE Process)
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 !V Create Model View
Tcode BD82 !V Generate partner Profiles & Create Ports
Tcode BD64 !V Distribute the Model view
This is Receiving system Settings
Receiving System(Inbound ALE )
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 !V Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 !V Idoc List for inbound status codes
Message Type MATMAS
Tcode BD10 !V Send Material Data
Tcode WE05 !V Idoc List for watching any Errors
1)a Goto Tcode SALE
Click on Sending & Receiving Systems-->Select Logical Systems
Here Define Logical Systems---> Click on Execute Button
go for new entries
1) System Name : ERP000
Description : Sending System
2) System Name : ERP800
Description : Receiving System
press Enter & Save
it will ask Request
if you want new request create new Request orpress continue for transfering the objects
B) goto Tcode SALE
Select Assign Client to Logical Systems-->Execute
000--> Double click on this
Give the following Information
Client : ERP 000
City :
Logical System
Currency
Client role
Save this Data
Step 2) For RFC Creation
Goto Tcode SM59-->Select R/3 Connects
Click on Create Button
RFC Destination Name should be same as partner's logical system name and case sensitive to create the ports automatically while generating the partner profiles
give the information for required fields
RFC Destination : ERP800
Connection type: 3
Description
Target Host : ERP000
System No:000
lan : EN
Client : 800
User : Login User Name
Password:
save this & Test it & RemortLogin
3)
Goto Tcode BD64 -- click on Change mode button
click on create moduleview
short text : xxxxxxxxxxxxxx
Technical Neme : MODEL_ALV
save this & Press ok
select your just created modelview Name :'MODEL_ALV'.
goto add message type
Model Name : MODEL_ALV
sender : ERP000
Receiver : ERP800
Message type :MATMAS
save & Press Enter
4) Goto Tcode BD82
Give Model View : MODEL_ALV
Partner system : ERP800
execute this by press F8 Button
it will gives you sending system port No :A000000015(Like)
5) Goto Tcode BD64
seelct the modelview
goto >edit>modelview-->distribute
press ok & Press enter
6)goto Tcode : BD10 for Material sending
Material : mat_001
Message Type : MATMAS
Logical System : ERP800
and Execute
7)goto Tcode : BD11 for Material Receiving
Material : mat_001
Message Type : MATMAS
and Execute --> 1 request idoc created for message type Matmas
press enter
Here Master Idoc set for Messge type MATMAS-->press Enter
1 Communication Idoc generated for Message Type
this is your IDOC
Change Pointers
I know how to change the description of a material using ALE Change Pointers.
I will give the following few steps
1) Tcode BD61---> check the change pointers activated check box
save and goback.
2) Tcode BD50---> check the MATMAS check box save and comeback.
3) Tcode BD51---> goto IDOC_INPUT_MATMAS01 select the checkbox save and comeback.
4) Tcode BD52---> give message type : matmas press ok button.
select all what ever you want and delete remaining fields.
save & come back.
5) 5) go to Tcode MM02 select one material and try to change the description and save it
it will effects the target systems material desciption will also changes
6) goto Tcode SE38 give program Name is : RBDMIDOC and Execute
give Message type : MATMAS and Executte
ALE/IDOC Status Codes/Messages
01 Error --> Idoc Added
30 Error --> Idoc ready for dispatch(ALE Service)
then goto SE38 --> Execute the Program RBDMIDOC
29 Error --> ALE Service Layer
then goto SE38 --> Execute the Program RSEOUT00
03 Error --> Data Passed to Port ok
then goto SE38 --> Execute the Program RBDMOIND
12 Error --> Dispatch ok
Inbound Status Codes
50 Error --> It will go for ALE Service Layer
56 Error --> Idoc with Errors added
51 Error --> Application Document not posted
65 Error --> Error in ALE Service Layer
for 51 or 56 Errors do the following steps
goto WE19 > give the IDOC Number and Execute>
Press on Inbound function Module
for 65 Error --> goto SE38 --> Execute the Program RBDAPP01 then your getting 51 Error
Regards,
Priyanka. -
Once in a while my full-crawl fails and stops working properly. The crawllogs show this error for all items crawled.
The item could not be indexed successfully because the item failed in the indexing subsystem. ( The item could not be indexed successfully because the item failed in the indexing subsystem.; Caught exception when preparing generation GID[7570]: (Previous generation
(last=GID[7569], curr=GID[7570]) is still active. Cannot open GID[7570]); Aborting insert of item in Link Database because it was not inserted to the Search Index.; ; SearchID = F201681E-AF1B-45D2-BFFD-6A2582D10C19 )
The full crawls starts out ok, after a while (1.5 hours into the process, 50% of all the data) suddenly no more items can be added to the index.
The index seems to be stuck. The index files on disk are no longer updated (Located in D:\Microsoft
Office Servers\15.0\Data\Office Server\Applications\Search\Nodes\BAADC4\IndexComponent3\storage\data\SP4d91e6081ac3.3.I.0.0\ms\%default) The Index and Admin component start to report these error in the ULS logs:
NodeRunnerIndex: Journal[SP4d91e6081ac3]:
Rolling back GID[7570] to GID[7569] prepGen=GID[7569]
NodeRunnerIndex: Remote
service invocation: method=RollbackGeneration() Service = { Implementation type=Microsoft.Ceres.SearchCore.ContentTargets.IndexRouter.IndexRouter Component: SP4d91e6081ac3I.0.0.IndexRouter Exposer Name: GenerationContentTarget} terminated
with exception: System.InvalidOperationException: Illegal state transition in SP4d91e6081ac3I.0.0.FastServer.FSIndex: Rollback -> Rollback
NodeRummerAdmin: RetryableInvocation[SP4d91e6081ac3]:
Exception invoking index cell I.0.0. Retrying in 16 seconds: System.InvalidOperationException: Illegal state transition in SP4d91e6081ac3I.0.0.FastServer.FSIndex: Rollback -> Rollback
Looks to me the index has troubles updating/merging 'generations'. But the exact working of the indexer is not documented (as far is I know). Let alone how to fix this.
Other (maybe related) observations
Just before the errors start the NodeRunnerIndex starts a 'checkpoint': Journal[SP4d91e6081ac3]:
Starting checkpoint because forceCheckpoint is true.which ends a few moments later with Journal[SP4d91e6081ac3]:
All journal users have completed checkpoint Checkpoint[7560-7569].
Also just before the errors start to appear a TimerJob starts: Name=Timer
Job job-application-server-admin-service. This timerjobs does some strange things to the search topology: Synchronizing
Search Topology for application 'Search Service Application' with active topology [...] and Activating
components. Previous topology: --- New Topology: TopologyId: [...] followed by Starting
to execute Index RedistributeData method.
And right after these two evente the errors start to occur. (each row is a ULS log enrty)
INFO : fsplugin: IndexComponent3-bd83a8aa-923b-4526-97e8-47eac0986ff7-SP4d91e6081ac3.I.0.0 (4236): Prepare generation: 324 documents
IndexRouter[SP4d91e6081ac3]: Caught exception when preparing generation GID[7570]: (External component has thrown an exception.): System.Runtime.InteropServices.SEHException (0x80004005): External component has thrown an exception.
GenerationDispatcher[SP4d91e6081ac3]: Failed to prepare GID[7570] in 453 ms, failed on cells: [I.0.0], stale services: []
Journal[SP4d91e6081ac3]: Rolling back GID[7570] to GID[7569] prepGen=GID[7569]
Remote service invocation: method=RollbackGeneration() Service = { Implementation type=Microsoft.Ceres.SearchCore.ContentTargets.IndexRouter.IndexRouter Component: SP4d91e6081ac3I.0.0.IndexRouter Exposer Name: GenerationContentTarget} terminated with exception: System.Runtime.InteropServices.SEHException (0x80004005): External component has thrown an exception.
RetryableInvocation[SP4d91e6081ac3]: Exception invoking index cell I.0.0. Retrying in 2 seconds: System.Runtime.InteropServices.SEHException (0x80004005): External component has thrown an exception.
Journal[SP4d91e6081ac3]: Rolling back GID[7570] to GID[7569] prepGen=GID[7569]
The Question What is causing this? And how to prevent it? It happend twice in two weeks
nows. Out of the blue, no config change has been made, all disks have enough space.
Known Fix This resolves the problem, but doesn's address the root-cause of the problem!
Stop all crawls.
Wait a few minutes to let the crawl come to a complete stop.
Reset the index (clearing all!)
Start a full-crawl. In the meantime no search is available to the end user (boohoo!)Hi,
I searched for the similar error log, the issue is finally solved by adding more drive space even though they though there is plenty space already.
https://social.technet.microsoft.com/Forums/office/en-US/d06c9b2c-0bc1-44c6-b83a-2dc0b70936c4/the-item-could-not-be-indexed-successfully-because-the-item-failed-in-the-indexing-subsystem?forum=sharepointsearch
http://community.spiceworks.com/topic/480369-the-item-could-not-be-indexed-successfully
From your decription, the issue seems to occur to your full crawl. There is one point in best practise for crawling:
Run full crawls only when it is necessary, the reasons to do a full crawl are as below:
https://technet.microsoft.com/en-us/library/jj219577.aspx#Plan_full_crawl
https://technet.microsoft.com/en-us/library/dn535606.aspx
Regards,
Rebecca Tu
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
HELP: What is the proper way to completely uninstall Adobe Design Premium
In need to completely uninstall Adobe Design Premium CS3/CS4 from my Mac.
What is the best way to do this??? Is there an Adobe utility ?This guide may help.
DALE -
I dynamically generate textboxes, so they all have the same
name. There are ten boxes in all. I know it outputs the checked
boxes in a comma deliminted string, 1,2,3,4....etc. If checkbox 4
was one of the boxes selected, I need to do a cflocation to
redirect to another. I was using cfif checkbox_id = "4" but that
only works if that was the only box selected.
If the other boxes were seleced in addition to box 4, the
ciffi does not work, so what is the proper command to check if 4 is
in the list ?
For the life of me, I cannot remember and I know I have done
it before. I know sql query is in (1,2,3....), but what is the cf
command ?
ThanksHi Fober1, thanks for the reply
<cfset boxes="4,5,7">
<cfif listfind( boxes, "1" ) GT 0>
found3
</cfif>
Boxes contains the list of the values of the checkboxes that
were checked, and listfind finds if the first checkbox, value 1 is
in the list, which means it was checked. and GT 0 means that it was
found/in the list ? -
Please help; What makes the 2nd Gen iPod Touch better then the 1st Gen?
I am thinking about buying an 8gb iPod Touch, should i save some dough and buy the 1st gen iPod Touch or pay a bit more and buy the 2nd gen?
Also, what makes the 2nd gen iPod Touch better then the 1st gen, what has been improved, changed, etc...?
Thanks in advance.I had the 1st gen touch since it first came out and just got the 2nd gen touch last month. I'll list a few things I like about the 2nd gen touch.
1. internal speaker. makes a huge difference in my opinion.
2. new design. alot nicer to hold in your hand than the 1st gen.
3. seems faster overall than the 1st gen touch.
4.display no longer has blue tint. now has more of a yellow tint. makes pics and movies look a little better.
If you can afford the 2nd gen touch I would highly recommend it.
lenn
Maybe you are looking for
-
Data encryption in oracle 8i and 9i
Hi, I would like to know how data encryption in Oracle 9i differes from that of Oracle 9i database. Thanks in advance Shinto
-
How to install me new audigy Se c
hello all, I recenly purchased a sound blaster audigy se card but cannot get any audio out of it. I have disabled onboard sound in the bios and downloaded the ltest driver from the creative web-site, but to no avail. I am on a dell 670 and have insta
-
Apache xmlbeans + jdk1.6 crashes in different kind of settings
I am migrating project from jdk1.5 and jdk1.6. The project was quite stable under jdk1.5. After migrating to jdk1.6 (without any code change), jdk1.6 always gets crashed. The testing environment is: 1) Sun Sparc T5220 $uname -a SunOS box1 5.10 Generi
-
Change filter parameters during a transition
Hello all... hopefully someone can help me with this. I'm trying to change the amount of blur that is applied to an object over the course of a transition. I've got an object in the foreground that I'm moving to the background and I'd like to put a b
-
Alignment problem in flash file while viewing in IE 7
hi, When i try to view the Xcelsisus Dashboard flash file from the BOBJ Enterprise server, some objects in the flash objects get aligned incorrectly. But when i view the flash file from Xcelsius>Export to flash, ther is no such mis-alignment.. Is the