Edi mapping for 856
Hi,
can any one please map the below listed fields for edi 856..
Hierarchical Level
1)Hierarchical ID Number:
2)Hierarchical Parent ID Number:
3)Hierarchical Level Code:
4)Hierarchical Child Code:
I think TDLINE is just a free field to fill data as description and stuff like that, on the other hand the EDL24 contains all the position data and packing data
for example, if you have 2 positions in the delivery and they're packed in two packs, you would have 4 EDL24, the 2 positions and the 2 positions within the packs (maybe some reference to how the pack is done?) : (00001), (00002), (90001), (90002)
I think that's easier than to check for EDL37 and the sub EDL44 (Pack and Item segments)
but since the TDLINE can be used in many ways as reference you should probably check the logic and any document for that development
By the way, i was currently requesting in one of my questions how to create a UDF for the Pack, items structure, could you provide more info about that? thanks!
Similar Messages
-
856 EDI mapping for G_SHL Segment
Hi Guys,
I have a question regarding the G_SHL segement mapping in DELVRY01.-- EDI856 scenario.
I have this mapping for other customer now i need to implement the same for new customer.
In that mapping they created 3 duplicalte G_SHL .
For 3rd G_SHL they created a UDF for generating ITEMS, PACKS, and their count by taking the inputs as E1EDL24 and TDLINE.
what is the need of these two inputs.
Regards,
SandeepI think TDLINE is just a free field to fill data as description and stuff like that, on the other hand the EDL24 contains all the position data and packing data
for example, if you have 2 positions in the delivery and they're packed in two packs, you would have 4 EDL24, the 2 positions and the 2 positions within the packs (maybe some reference to how the pack is done?) : (00001), (00002), (90001), (90002)
I think that's easier than to check for EDL37 and the sub EDL44 (Pack and Item segments)
but since the TDLINE can be used in many ways as reference you should probably check the logic and any document for that development
By the way, i was currently requesting in one of my questions how to create a UDF for the Pack, items structure, could you provide more info about that? thanks! -
Ramesh,
I hate to keep bugging everyone but i have another question.
I am trying to transform data into an X-12 856 document (outbound). I have most of the looping and everything working. My only issue is how do you handle the parent child relationships in the HL01/02 ? Since xpath does not let you increment a variable how can you keep the count of the HL loops let alone tell the HL02 (parent's HL01) We are using a SOPI scenario and the items need to be subordinate to the appopriate pack level.
I really appreciate all the time and awnsers you have given me so far :)
Thank you in advance,
JadenIs there a tutorial on how to use the XSLT Data Mapper? I can't seem to find it, I'm using JDeveloper 11g preview 2. I ran the studio version 10.1.3.1.0, but I can't find it either.
I found a document on XSLT Data Mapper, but it seems like they are for WSDL mapping. Is it possible to map between two XMLs/XSD?
http://download.oracle.com/docs/cd/E10291_01/doc.1013/e10295/xslt_mpr.htm#BABBCIAI -
EDI mapping for Shipment notice - SHPMNT05 to 940
Hi,
I had to map the SHPMNT05 IDOC to an EDI 940 structure. Was wondering if this is the right way to go for Shipment notices to Warehouses and if someone had a template for this particular mapping.
Thanks,
Karun.Hi,
You can try this by making use of preceding-sibling and following-sibling axes in XSLT..after S, u can put a
<xsl:if test following-sibling::ns0:ReadDataFromOutput[ns0:segment='O']> and try same with rest of the segement. -
Hi Experts,
Please help me how can I add a new field in EDI for 856? I'm not a EDI/IDOC developer. I have a need to add a new field for incoming 856 EDI. I found a field in IDOC to map my requirement, but my EDI/IDOC developer is asking me where do we map this in EDI? Could some-one help me identifying an existing field or adding a new field to EDI? What's the recommendation? Please help me on this.
Appreciate your help.
Thank you.
with regards,
Muthu Ganapathy.Hello Muthu
First of all I have to point out that it took me about half an hour to find out the essential data related LGPBE ( Storage Bin ). It would have been much easier if you had provided these details in the first place.
Nevertheless, the definition of data element LGPBE was giving me the crucial input:
Definition: storage bin
Warehouse Management (LE-WM)
The smallest addressable unit of space in a warehouse, referred to as a
"slot."
Because the address of a storage bin is derived from a coordinate
system, the bin is referred to as a coordinate, for example, 02-04-03
refers to row 02, stack 04, level 03.
Warehouse Management (LE-WM)
Smallest addressable unit of space in a warehouse (often referred to as
a "slot").
Since the address of a storage bin is frequently derived from a
coordinate system, the bin is referred to as a coordinate; for example,
02-04-03 refers to row 02, stack 04, level 03.
I cannot tell you which field in the ANSI 856 message you need to fill.
Presumably I know which segment one should fill in case of UN/EDIFACT D.96A DESADV message.
Based on this it should be quite easy for you to find the corresponding segment in message 856.
Reference: [Edifactory: D.96A DESADV|http://www.edifactory.de/msginfo.php?s=D96A&m=DESADV]
Segment group 15: LIN-PIA-IMD-MEA-QTY-ALI-GIN-GIR-DLM-DTM-FTX-MOA-SG16-SG17-SG18-SG19-SG20-SG23
Condition: C,9999
A group of segments providing details of the individualdespatched items.
Segment group 18 contains the segment LOC which most likely is the right place for the storage bin information.
Segment group 18: LOC-NAD-DTM-QTY
Condition: C,100
A group of segments giving location information and whererelevant, additional addresses, date and time, andquantities.
LOC, Place/location identification
Condition: M,1
A segment identifying a specific location to whichproducts will be delivered.
Segment LOC has the following structure:
Segment LOC
PLACE/LOCATION IDENTIFICATION
To identify a country/place/location/related location one/related location two.
Structure
3227 PLACE/LOCATION QUALIFIER M an1..3
C517 LOCATION IDENTIFICATION C
| 3225 Place/location identification C an1..25
| 1131 Code list qualifier C an1..3
| 3055 Code list responsible agency, coded C an1..3
| 3224 Place/location C an1..70
C519 RELATED LOCATION ONE IDENTIFICATION C
| 3223 Related place/location one identification C an1..25
| 1131 Code list qualifier C an1..3
| 3055 Code list responsible agency, coded C an1..3
| 3222 Related place/location one C an1..70
C553 RELATED LOCATION TWO IDENTIFICATION C
| 3233 Related place/location two identification C an1..25
| 1131 Code list qualifier C an1..3
| 3055 Code list responsible agency, coded C an1..3
| 3232 Related place/location two C an1..70
5479 RELATION, CODED C an1..3
Finally, have a look at qualifier '129' for data element C517-1131:
129 Customs warehouse
Identification and/or location of the Customs warehouse in which goods will be or have been deposited (CCC).
Regards
Uwe -
Sender / Receiver ID mapping for EDI interfaces and Type of seeburger adapt
We need to set up a interface using Seeburger adapter for Purchase order IDOC to 850 EDI mapping.. After reading from SDN,
1) We can use the standard mapping in BIC MD to do E2X and X2E mapping..
2) We can use any of the AS2, EDI generic adapter, Seeburger FTP adapter or Seeburger SFTP adapter...
How do we decide which adapters should be chosen? I can see that it makes sense to use SFTP adapter or AS2 adapter for security...
Also how do we map Sender and Receiver IDs on the EDI message.. Should this be hardcoded as part of mapping or is there any facility in seeburger adapter to do this? I saw some references to Party Identifiers and not sure how it is used in setting up Sender/ Receiver ID
Also the graphical mapping to convert IDOC XML to EDI XML, Do we have standard mapping defined or do we need to create our own graphical mapping.Hi Kris,
I had worked in the somehow same scenario, It was IDOC to EDIFACT file.
I can give you few clues which might be helpful
In BIC MD you have to create your own mapping if the standard mapping is not available (First check all the standard mappings in BIC). For your reference you need X2E mapping, as your scenario is IDOC to 850 EDI.
"the graphical mapping to convert IDOC XML to EDI XML, Do we have standard mapping defined or do we need to create our own graphical mapping."
In graphical mapping i created my own mapping, Seeburger has given some sample mappings you can check those for your reference (SEEBURGER_GENERIC_EDI software component). Mostly you have to create your own. You need a document from your functional consultant so that you are able to map correct fields and constants.
"how do we map Sender and Receiver IDs on the EDI message.. Should this be hardcoded as part of mapping or is there any facility in seeburger adapter to do this? I saw some references to Party Identifiers and not sure how it is used in setting up Sender/ Receiver ID"
This has been generally hardcoded in message mapping (In my case i hardcoded). If any of ur IDOC field contains that data you can map that field. But better Idea is ask your functional expert.
"How do we decide which adapters should be chosen? I can see that it makes sense to use SFTP adapter or AS2 adapter for security... "
You can choose adapter according to your requirement. In my case i used File adapter as i have to create file in PI server only. My suggestion you can use SFTP for seeburger
Hope these points are helpfu for u
Regards,
Shradha -
Generating IDoc DDF structures for EDI mapping
Hello all,
I am looking for a way to generate IDoc DDF structures to use them in the EDI mapping in Gentran.
I was able to find one on ERPGenie.com (developed by Kevin Wilson) but it is only available for ECC 4.x. We are on ECC 6 and the program gives me an ABAP dump when I try to run it.
Does anyone have the fix for this code? Or perhaps another way to accomplish this task?
Actually, I am only interested in generating the MBGMCR02 IDoc
Thanks for your help
<REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Apr 7, 2008 12:36 PMIt's been a long time since I have done any IDOC processing.
Go to SE37 and enter the function module IDOC_INPUT_ORDERS. Display the source code. Search for "CALL CUSTOMER". You should see several "CALL CUSTOMER-FUNCTION" lines. These are enhancements where you can manipulate the IDOC data. If you locate the correct one (where the data is read from the IDOC but not yet validated), you should be able to map the partner function value. Double-clicking on the number in quotes will bring you to an "EXIT_" function module. A "ZX" INCLUDE program is referenced. If you haven't used the exit yet, double-clicking on the ZX INCLUDE will create it. The values passed into the function module are available in the INCLUDE.
Ideally, you should create a project in transaction CMOD that references the chosen enhancement. This way you can activate/deactivate without commenting/uncommenting the code in the INCLUDE. -
Some one guide me in EDI Mapping with Gentran.....for Unix
EX 856
RameshI need Application integration Mapping guied line,,,,any helping documents (rules and steps) or guide or screen shots .....at present i need to do 856 mapping as soon as possible....any help is rewarded max,,,,,,Ramesh
or Documents can send to my mail id [email protected]
Note: Max points will rewareded for your help
Ramesh -
Error in code page mapping for Source System
Hi All,
We are Loading data into BI system from MDM System.
It was loading fine but Yesterday we got an error " Error in code page mapping for Source System"
Message Class: RSDS_ACCESS 13.
We alreday tried to Search any IDOCs with error/unprocessed , but there isn't any.
Any pointers for this error will be Helpful.
Regards,
MayankOur SP currently SAPKW70019 , the SAP note mentioned above required to apply SP for 13, which we already beyond that...unfortunately we still face the same problem .. almost every day ..
any advice.. ?
Edited by: Edi Erwan Abu Talib on Jun 22, 2009 8:22 AM -
PI EDI help: What is the source of ISA13 in a IDOC to EDI mapping
Hello Experts,
It would be of great help if you can provide the field mapping for ISA 13 in outbound from IDOC sceanrio:
IDOC: INVOIC02 - to - EDI 810 mapping.
Is it the best practice to have ECC send the value in a particular IDOC field ( like RFINT) or PI has to use a custom function to populate the ISA13 field.?
Thank you,
Patrick.Hi,
ISA13 is for Interchange Control Number. It is a control number assigned by the interchange sender.
Normally its Sequential number starting with 000000001 and incremented by 1 for each subsequent ISA between sender and receiver.
This is a very useful value to include. It creates an explicit link between the IDoc and the EDI transmission. This number eases Production Support greatly. When there's an issue with a Partner EDI transmission, the Partner's EDI support people want to know the Interchange Control Number
The IDoc interface does not process or check this field.
regards
Ganga -
Seeburger BIC mapping for 4030
Hi,
I have created a new mapping for ANSI X12 4030 using Seeburger Mapping designer. While converting from XML to EDI ANSI format the number included segments in the segment "SE" is calculated, does anyone know where this value will be calculated for 4010 version. so that i can incorprate the same for 4030 version
With Regards
K.VaradharajanHi,
SE indicate the starting of a Segment.Check below links for seeburger.
Please see the below blogs
/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
/people/william.li/blog/2006/03/17/how-to-get-started-using-conversion-agent-from-itemfield
/people/paul.medaille/blog/2005/11/17/more-on-the-sap-conversion-agent-by-itemfield
http://www.stylusstudio.com/edi/XML_to_X12.html
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b0b355ae-0501-0010-3b83-8f2bb566fa47
Details on XI EDI adapter from seeburger
Check this for Conversions-
/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
SAP Adapters
EDI with XI
http://www.seeburger.com
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/SEEBURGER_SAP_Adapter_engl.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
http://www.seeburger.com
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/SEEBURGER_SAP_Adapter_engl.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
Regards,
Phani
Reward points if Helpful -
hi,
Please let me know if my understanding is correct. In SAP EDI setup two people involved, ABAP programmer who customzes the IDOCS, sets up the EDI setup on SAP side like number ranges, partner profiles, condition records, message control etc and monitors the IDOC status till it is transmitted to the EDI subsystem and also the IDOCs received at SAP end.
The other person is an EDI specialist who will map the IDOCs to the EDI doc set based on trading partner requirements in the EDI subsystem.
So the ABAP deveoper need not know anything about the mapping done at EDI subsystem ?? His job is only at the SAP end ?? Am I right ??
thanks
Edited by: sdnuser1 sdnsurname on Mar 20, 2008 6:03 AMHi,
Ur assumptions are correct up to some extent...
What will happen SAP EDI implementation proejcts is most of the times it is the SAP technical people responsibility to do the EDI mapping also.
So an ABAPer with EDI knowledege(ABAP/EDI consultant) will take care of SAP EDI settings at SAP side and he/she will develop the mapping document and hand over the same to EDI sybsystem provider.
EDI subsystem people will feed the mapping instructions into EDI subsystem based on ur mapping document.Core EDI people will not understand the SAP terminology and as ABAP/EDI consultant will take of both settings.For an ABAP/EDI consultant also will not be given full access of EDI subsystem and u will only hand over the mapping docuemnt(IDOC segments to EDI standards mapping ) and they will feed the instructiona and get back 2 u for any doubts..
Hope this help.Let me know if u need any help for further understanding..
Rward if helpfulll
ramesh -
Hi,
As my client is implementing EDI through a trusted link, they had asked me to take care of the mapping section along with the development of interfaces.
As generally the middleware or translator people would do the mapping processes, it is totally new for me.
Please advise me in this regard where to start and what is the my job into this.
Do i have to map the incoming or outgoing edi standards to idoc segments.
If so, what are the all things i need to know and do.
As i have ample time, it would be nice for a quick start into it.
Please help me in this regard.
Thanks in advance,
Anandh.B
Points would be awarded for everyone ............Anandha,
As you mentioned, EDI mapping is typically done using a middleware tool or EDI Translator. Are they asking you to do mapping in ABAP or is there another tool you are going to use?
If you are going to write ABAP programs to do your mapping you have a big challenge ahead of you. You will need to become familiar with whatever EDI standards you will be mapping from. These standards will have the layout of the messages that you will receive.
If you are going to code all of this in ABAP you don't necessarily have to go to IDOCs however it can be very helpful when loading data. By using SAP's IDOC technology and processing you have better traceability into the transaction posting in your system.
In general this is what you will probably need to know:
1. Which EDI messages you will need to translate
2. Which IDOC types those messages correspond with
3. The structures of both the EDI messages and IDOCs
4. Setup of SAP IDOC system. (Execute area menu WEDI from the main screen in SAP)
5. Set up of the application data for IDOC processing - particularly in the outbound - which partners will be recieving which messages
I am sure there is a lot more but this will hopefully get you started.
Chris -
Bank Reconcliation EDI Mapping
Can I please know how to map for Bank REconciliation. I mean I need the IDOC Type and configuration settings in SAP. Iam using a third party adapter to convert the EDI file into SAP format which is evision. So how do I map this file into SAP format. Iam new to EDI . So please help me out..
VikyIDOC types are templates for specific message types depending on what is the business document, you want to exchange.
WE30 - you can create a IDOC type.
An IDOC with data, will have to be triggered by the application that is trying to send out the data.
FOr testing you can use WE19.
how to create idoc?
*WE30 - you can create a IDOC type
For more information in details on the same along with the examples can be viewed on:
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm#_Toc8400404
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a6620507d11d18ee90000e8366fc2/frameset.htm
http://www.sappoint.com/presentation.html
http://www.allsaplinks.com/idoc_search.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
For Example if you want to convert EDI 810 TO An Idoc , it will under go the process of mapping by the third party and finally matches into SAP Invoice, for example.
EDI810--MApping--
Invoice.
There are number of tools for mapping Example Altova, EDIdev etc.
Here are some links
http://www.altova.com/videos.asp?type=0&video=edimapping
Check the link - http://www.erpgenie.com/sapedi/messagecontrol.htm
You can also refer to SAP help for more details: http://help.sap.com/saphelp_nw2004s/helpdata/en/c8/19878343b111d1896f0000e8322d00/frameset.htm -
Hi Experts,
I am facing problem with mapping for standard SalesOrder Idoc ORDERS.ORDER05.
My Source Structure is: X12 EDI850
<G_SPO1> (occrance 1..100000)
<S_PO1> (occurance is 1..1)
<D_234/>
<D_234_2/>
<D_234_3/>
<D_234_4/>
<D_234_5/>
<D_234_6/>
<D_234_7/>
<D_234_8/>
<D_234_9/>
<D_234_10/>
</S_PO1>
</G_SPO1>
Target Structure is:
E1EDP01
--->E1EDP19
--->IDTNR
Functionality is passing material numbers of EDI customers to IDTNR field in E1EDP19 filed under segment E1EDP01.
From source i will get set of material numbers, for one set 10 material numbers(In source you can find 10 fields for 10 material numbers)
Requirement: I need to send those material numbers to IDTNR (One to one mapping ).
For getting 10 material numbers i just duplicated segment E1EDP19 in target side and mapped one field of source to IDTNR target in each segment. Totally mapped 10 source fields in 10 segments.
If 20 material numbers I will get two sets <G_SPO1> will repeat two times, each time 10 material numbers. So I mapped G_SPO1 to E1EDP01
S_PO1 to E1EDP19.
My out put is coming as 10 E1EDP19 segments under E1EDP01 if 10 materail numbers.
But problem is ECC team asking to get one E1EDP19 line item value under E1EDP01 line item header. They are not accepting duplicate E1EDP19 segments under header E1EDP01.
How to acheive this with my requirement.
Appreciate your hellp on this.
Thanks & Regards,
A.Neelima.There is no relation between D_234 and D_356.
I want to pass D_356 to KTEXT in all E1EDP01 segments which ever i will get based on the condition we implemented for E1EDP01.
Present its coming only for E1EDP01 first segment (for which i used condition with D_234), its not coming for remaining 9 E1EDP01 segments (for which i used conditions with D_234_2 to D_234_10)
If i pass sample input payload:
<S_ST>
<S_PID>
<D_350>Description</D_350>
</S_PID>
<G_SPO1>
<S_PO1>
<D_234>1</D_234>
<D_234_2/>2</D_234_2>
<D_234_3/>
<D_234_4/>
<D_234_5/>
<D_234_6/>
<D_234_7/>
<D_234_8/>
<D_234_9/>
<D_234_10/>
</S_PO1>
</G_SPO1>
<G_SPO1>
<S_PO1>
<D_234>3</D_234>
<D_234_2>4<D_234_2>
<D_234_3/>
<D_234_4/>
<D_234_5/>
<D_234_6/>
<D_234_7/>
<D_234_8/>
<D_234_9/>
<D_234_10/>
</S_PO1>
</G_SPO1>
</S_ST>
Coming Output Now: (KTEXT field is missing in last two segments)
<E1EDP01>
<E1EDP19>
<IDTNR>1</IDTNR>
<KTEXT>Decription</KTEXT>
</E1EDP19>
</E1EDP01>
<E1EDP01>
<E1EDP19>
<IDTNR>3</IDTNR>
<KTEXT>Decription</KTEXT>
</E1EDP19>
</E1EDP01>
<E1EDP01>
<E1EDP19>
<IDTNR>2</IDTNR>
</E1EDP19>
</E1EDP01>
<E1EDP01>
<E1EDP19>
<IDTNR>4</IDTNR>
</E1EDP19>
</E1EDP01>
Expected Output:
<E1EDP01>
<E1EDP19>
<IDTNR>1</IDTNR>
<KTEXT>Decription</KTEXT>
</E1EDP19>
</E1EDP01>
<E1EDP01>
<E1EDP19>
<IDTNR>3</IDTNR>
<KTEXT>Decription</KTEXT>
</E1EDP19>
</E1EDP01>
<E1EDP01>
<E1EDP19>
<IDTNR>2</IDTNR>
<KTEXT>Decription</KTEXT>
</E1EDP19>
</E1EDP01>
<E1EDP01>
<E1EDP19>
<IDTNR>4</IDTNR>
<KTEXT>Decription</KTEXT>
</E1EDP19>
</E1EDP01>
Thnaks & Regards,
A.Neelima.
Maybe you are looking for
-
My year anniversary as an Apple user is coming up in May. It is indeed a anniversary worthy of celebration. After being a Windows user since... well, I shall refrain from showing my age, suffice to say, I remember the yellow file manager icon on the
-
Hi all: I hava configed the <security-constraint> in web.xml, e.g : <web-resource-name>AllAdmin</web-resource-name> <url-pattern>faces/pub/staff/admin/*</url-pattern> and in this <security-constraint> does not hava the role-name : <role-name>MIR Cust
-
Why is Finder (desktop) getting stuck on MacBookPro?
I have OSX version 10.7.4 and my desktop keeps freezing while I am moving things from folder to folder. My browser will work, but nothing on my desktop, the wheel just keeps spinning. I have to shut the computer off and then have trouble restarting.
-
It appears that there may be a bug in the formatting of reports using PDF output on the the server. Client side output is ok. This is in 9ias. There is a similar bug I am told in 6.0.8.20. Is there a patch in the works ?
-
Mac OS 9.1 and 2001 Office :mac
Greetings! I am in a NYC Public School and doing summer maintenance on the older computers, mostly gumdrop iMacs in all the lower grade classrooms, about 40 computers. On a majority of the machines, when I try to open up MS Word, from the 2001 Office