Edit Leading role in Project

Hi All,
I had performed the Basic configuration in solution manager.Unfortunately for development system I had selected the leading role of the system as production.I want to change it to development.Is there any way I can change that?
Also If the Leading role for solman is set as production.Can I add my development and QA system to it?
Thanks for your help in advance!!
Regards!!
Ravi

Hi Ravi,
Not to worry, you can change the leading role for your system.
To change the system role to any other that is relevant in your landscape:
Go to transaction SOLAR01 > Click on the first level of the Project Name (Under Business Blueprint Structure) to select the Project.
Click Business Blueprint in the Menu > System Role > Choose the relevant System Role (in your case Development)
Click Copy
This should replicate to all nodes and then you should be able to assign transaction to the business processes.
If not, there is a similar work around which also works.
Go to transaction SOLAR_PROJECT_ADMIN
System Landsacpe Tab
Systems subtab
Click System Role Assignment
Remove the Production System (or all those not relevant to your Project and Logical Components)
Save Project
Go to SOLAR01 and it should reflect it in the Blueprint.
You can always go back to this and add the System Roles you removed and the Blueprint will reference the correct Role.
You can also add any other Dev/QA systems to the logical component as required.
Hope this helps,
-Rohan

Similar Messages

Role in Project

Hai Gurus,
I faced one question what is your role in the project, How can we tell the answere,in myresume i mentioned my key skills as timemanagement and OM and PA.
with regards

Hi Santosh,
Role in project means, whether you where a team member or team lead or PM in your respective projects.
Hope this is clear.
Thanks,
Sarika.

How to export all edited photos in a project

Once I finish editing photos in a project I often wish to export all of those photos, in their fnal edited form, to a folder which I then burn to a CD and give to someone. I have been using File-Export-Versions thinking that this would do the trick. However, it seems that this process exports the photo without all of my nifty editing. I've looke at the manual, but must be too dense to find the answer. Thanks for any help you can give.

What you are doing should work.
Here is a recipe -- try it and report back.
Select the Project.
Clear all filters.
Filter using the Rule "Adjustments" with the setting "are applied".
Add other Rules as desired (e.g.: Rating is 4★ or better).
Select all Images.
"File→Export→Version", and choose an Export Preset that meets your needs.
Masters are the un-changed (and never changed by Aperture) original files that you imported. Versions are Images that you have made by changing these in some way. Exporting a Version should always include any Adjustments present in the Version.
Message was edited by: Kirby Krieger

How can I keep the edited video which in project into Libray for re-edit ?

How can I keep the edited video which in project into Libray for re-edit later ??
As i used i movie 06 before....
after i imported the videos in to the library, then i can drag the videos to the timeline(now is project)
then edit it.
After that i can just drag all the timeline clips which is edited to the library.So I can keep it for next time if i wanna re-edit.
But Now if did all the editing at the library clips then drag to project, i can not drag the project clips back to library, so how can i keep it for my editing safty?
I do not wanna to edit again the same clips from the library!!! as i need to edit many different short clips together then export to individual videos, and i may need to re-edit.
or i can keep the edited video in project, then i can selected the clips which i willing to export, the rest video who in the project will not be export at the same video? I m wondering....
please help!!! Urgent!!

Just keep the project. Then you can just duplicate the project and make the next set of changes as needed. By duplicating the project, you are not duplicating the event, just the links to the event library.
This way you are not eating up disk space.
Does that help?

Editing Final Cut Studio Projects on Final Cut X

Has anyone heard if you will ever be able to edit older Final Cut projects on the FC X?

Either- http://assistedediting.intelligentassistance.com/7toX/
or use 7. It can exist on the same Mac alongside FCP X - though you can't run them both at the same time.

Sap-abap Technical Team Leader Roles and Responsibilities

Can u give me Sap-abap Technical Team Leader Roles and Responsibilities.

Yes I can, but I don't think I'll share my experience with you.
Here's a tip for you though, how about only applying for jobs you are skilled at and not try to lie yourself into a job.
Warm regards, Rob Dielemans

How to edit the roles in ABAP stack?

Hello All,
Can any one please tell me how to edit a role in ABAP Stack in step by step manner. If you could guide me to any link that would be really great. Thanks in advance.
Sardaar.

Hi Sardaar,
By using transaction code PFCG you can edit a role/create a role.
once you execute t-code PFCG in the initial screen you are displayed with options for Create / Edit role or composite role.
Enter the name of the role which you want to edit.
Clik on the edit button (pencil icon) or if you want to view only clik on next button.
Once you click on edit button in the next screen you will have multiple tabs
Description / Menu / Workflow / Authorizations / Users
If you want to write some description you can use this tab.
If you want to add T-Codes/Reports or Folder etc click on Menu.
Add necessary transactions (click on + transaction button) then click on Authorization tab.
you will be two options
Change authorization data
Expert mode
If you want to edit authorization data click pencil button
If you have added new T-codes then click on Expert mode
-> choose read old status and merge with new data.
in the next screen you will be displyed with existing objects
Change the values and generate the role.
then click back button and then click on user tab assign user as required.
If you need more help let me know
For more info
Single Role: http://help.sap.com/saphelp_erp2005vp/helpdata/en/52/6714b6439b11d1896f0000e8322d00/frameset.htm
Composite Role : http://help.sap.com/saphelp_erp2005vp/helpdata/en/42/271d24d86211d2961a0000e82de14a/frameset.htm
Cheers
Soma

I movie won't let me edit any of my projects.

I was working on several projects in iMovie and they were working fine but now iMovie won't let me edit any of my projects and i'm not sure how to fix it. I even started a new project and once i exited out of iMovie and opened it again it wouldn't let me edit the new project i started.

Try deleting iMovie's preference file. For the detailed steps, see my post in this recent thread:
https://discussions.apple.com/thread/3285418?tstart=0
If you are running Lion, to access your User/Library folder, click on the Desktop so that the Finder menu is available. Now option-click on Go in the menu to reveal the Library folder in the drop-down list. If you simply click on Go, the Library folder is hidden.
John

Captivate 4-Unable to Edit or Save a Project

Hi,
I am creating a CBT using Captivate 4. There are two slides so far and the size of the project is 1,901 kb. One slide in the project has six click boxes with multiple actions and has five animations included in it which are hidden until the user clicks a click box. The concept works wonderfully, however, I am now unable to edit or save the project. I cannot finish it at this point. Captivate will not allow me to add any additional buttons, click boxes, highlight boxes, new slides and so on. It also will not allow me to delete any unused items from the library, or save the edits I made up to that point.
I have tried the following, closing the project, closing Captivate and restarting my computer. I have also imported the slides into a new project with the same outcome. I have copied and pasted the slides into a new project with the same outcome. I have also tried to do a save as and it will not allow that either. There are no error messages. The project is not save on the network, it is on my C:Drive. I have had to restart the project several times and has this happened with each project. Any ideas would be greatly appreciated.
Thanks
Wendy

click on the folder containing all these documents and do the following:
Right click on the folder, then select "Get Info"
Click the lock at the bottom to give yourself access to the permissions settings for this folder. A dialog will appear so you can enter your login name and password:
Now select your user name at the bottom (mine is wayne), set the read write permissions to "Read & Write" using the pop-up menu, then click the sprocket at the very bottom of the window and select "Apply to enclosed items..." from the pop-up menu. The click the lock again.
Now try to open your Numbers documents

Role out project

Dear all
   Can any one brief my about the Role out project and the difference between implementation and roleout.

Hi giri,
Implementation                                         Roll out
-Feasibility study, analysis              -Template rollout to geographies
and planning for implementation      -Process mapping country extensions
- Business process re-engineering     -Configuring country extensions
   and configuration                           -Custom developments for country
-Custom development                        Extensions
-Testing                                          -Additional module rollouts and also training
-Training and acceptance                   and development
-Change management
-Post implementation support
Hope this gives an insight on the Roll out.
Award points if helpful.
Mohan.

I want to break up my hour long video in iMovie 11 into smaller 15 minute segements to upload to youtube. How can i put EDITED VIDEO in new projects in iMovie?

I want to break up my hour long video in iMovie 11 into smaller 15 minute segements to upload to youtube. How can i put EDITED VIDEO in new projects in iMovie? (each 15 minute segment to iMovie)

In iMovie's Project Library view (where all your projects are listed), click on the name of your project (don't double-click to open it, just single click to highlight it).
From the Menu select File > Duplicate Project. A copy of your project will be placed in the Project Library. It will have the same name as the original, but with a number appended. You can rename it if desired - click on its name twice (not double-click) so that it is highlighted as light blue, then over-type it.
Delete from the duplicate all the clips and other media (for example, photos, music and so forth) that you don't want included in the first of your 15 minute segments. In other words, delete all but the first 15 minutes.
Continue creating duplicates of the original (and rename if necessary). Delete from each duplicate all the unrequired parts for each segment. So, for example, for the 2nd duplicate delete the first quarter (15 minutes) and the 3rd and 4th quarters.
You should end up with 4 duplicates with separate names, each containing the required segment. You will also have kept intact the original one hour movie, which you may wish to use independently of YouTube (maybe for burning a DVD or playback through a Media Player).
Note that duplicating the original project will not take up much extra space on your drive. Projects reference (link to) the associated Event (or Events) in the Event Library - they don't actually contain video as such. The project file also keeps track of titles, transitions, effects, music and so forth that you've added to the project.
John
Message was edited by: John Cogdell

Edit Enterprise Calendar in Project Server 2013 unavailable to permitted users

I am working with a customer where members of the Administrator group attempt to Edit Enterprise Calendars but are prevented from doing so. A dialog box displays saying that Project Professional 2013 needs to be installed. It is installed and they can connect
from Project Professional 2013 to Project Server using a Project Server Account.
The customer in question has an IT environment that is quite strictly controlled and policed - users cannot make changes to Internet Explorer security settings.
In Project Professional 2013 the Project Server Account is already created by some kind of group policy when Project Professional is installed on the users computer - normally when I get people to first open Project Professional I walk them through creating
a Project Server Account.
Users can open, edit and publish their Projects created in PWA in Project Professional 2013 without problems, the problem looks to be when you try to open something from within PWA for editing in Project Professional 2013, invoking a request in one application
that should result in the request being satisfied in another application.
When users are editing their Projects in Project Professional 2013 they can be seen to have their projects checked out when the "Force Check-In Enterprise Objects" page is checked - for example John Doe's project is checked out for editing
by John Doe.
I saw on another posting about Enterprise Calendars that stated:
I checked the ULS log, and it seems that Project Server is using a user account of a different user to launch Project Professional, and not the currently logged on user.
They have a very similar account name so I figure there is perhaps some kind of issue here.
I am wondering if this is the cause of the problem or if it is being provoked by some security settings in Internet Explorer blocking the communication between Project Professional 2013 and Project Server. Are there any Internet Explorer settings that should
be changed to allow users to edit Enterprise Calendars?
Dominic Moss MAPM, MCTS, MCITP, MCT
Wellingtone PM News
Wellingtone EPM Site
Wellingtone PM Recruitment

Dale - thanks for your advice, trawling through my cluttered memory I do recall a similar situation with 2007 where someone had created a PS Account that did not use the "normal" URL - I will check on this and respond.
Dominic Moss MAPM Microsoft Certified Technology Specialist Wellingtone Ltd - Your Project Management Partner - Certified Microsoft Partner Specialising in EPM/PPM - Corporate Members of the Association for Project Management [APM] - Members of the Recruitment
& Employment Confederation [REC] <a href="http://www.wellingtone.co.uk/project-management/project-server/">Wellingtone Project Server Services</a> 
<a href="http://www.wellingtone.co.uk/news/">Wellingtone PM News</a> <a href="http://www.wellingtone.co.uk/project-management-recruitment/">Wellingtone
Project Management Recruitment</a>

Renaming Sql Server 2008 r2 enterprise edition security roles

Hello All,
We got a requirement to rename existing SQL SERVER 2008 R2 ENTERPRISE EDITION security roles.
We are unaware of the impact on the existing users with these roles.
Can anybody advise us if we rename the role name manually,
We have to restart the sql server services to reflect the role name change to the users with these
roles?
Thanks In Advance

Hello All,
We got a requirement to rename existing SQL SERVER 2008 R2 ENTERPRISE EDITION security roles.
We are unaware of the impact on the existing users with these roles.
Can anybody advise us if we rename the role name manually,
We have to restart the sql server services to reflect the role name change to the users with these
roles?
Thanks In Advance
What security roles are you talking about?
built-in server- or database-roles? - those cannot be renamed.
User-defined roles can be renamed at any point in time without any problems unless you write code that specifically accesses them by name yourself.
Andreas Wolter (Blog |
Twitter)
MCSM: Microsoft Certified Solutions Master Data Platform, MCM, MVP
www.SarpedonQualityLab.com |
www.SQL-Server-Master-Class.com

Role of Team Lead in support project

Gurus
Can anybody share your experiences on the roles and responsibilities , scope of work of a team lead and give some tips and tricks to perform best as team lead in a support project.
Thanks in advance

Hi Emani,
Sorry for a bit delayed response. I am sharing my experience for the roles and responsibilities of team lead in a support project.
Team Lead mainly performs the following activities.
Status Reporting: As per the project guidelines he may provide status reporting to both the client and the internal stakeholder of his own organisation.
(ii)Process Owner Communication / Liaison: he may be required to communicate with the business process owners.
(iii) Work Assignment: He will be responsible for assigning the work(which is actually the service request or tickets) to the team members and also will continuoulsy monitor their timely closure.
(iv)Quality Control / Approvals: He will also be responsible for the overall quality of deliverables and will provide approvals if necessary.
Apart from these he will be responsible for managing the other soft issues like the training and development needs of his team members, their appraisal etc and will plan the resource deployment strategy for future.
Hope I had been of some help to you. Please assign points.
Rgds
Manish

Abaper role in project

what are the roles and responsibilties of functional and technical consltant

hi,
Role in SAP Implementation:
SAP Implementation is the whole of processes that defines a complete method to
implement SAP software in an organization. It is based on best practices and case studies from various literature sources and presents a collection of processes and products that make up a complete implementation method to allow any organization to plan and execute the implementation of SAP (ERP) software. The SAP implementation process is made up out of four main phases, i.e. the project preparation where a vision of the future-state of the SAP solution is being created, a sizing and blueprinting phase where the solution stack is created and training is being performed, a functional development phase and finally a final preparation phase, when the last tests are being performed before the actual go live.
ABAP Developer Role is to prepare the Technical Specification (based on a Functional Specification given by a Functional Consultant), build the code, Review the code and finally to prepare the Unit Test Cases. Sometimes ABAPer may be asked to do a technical research for an optimal solution.
Role in SAP Support:
After a go live, the application needs a maintenance/support to resolve the issues/tickets raised by the users when using the application. Ticket is like a request for changes/bug fixing or a request for a new ABAP Developer Role includes bug fixing/change the existing code due to new requirements/build a new code etc.
Role in SAP Upgrade:
SAP Upgrade is nothing but upgrading the software with a superior version which has got more advantages when compared to the earlier version.
ABAP Developer Role is to go through transactions SPAU/SPDD to compare the old and new version of the change and finally need to activate the relevant one. Some times might need to work on SAP notes too.
Hope this helps, <REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Feb 20, 2008 4:49 PM

Edit Leading role in Project

Similar Messages

Maybe you are looking for