Editable fields (Rows and columns) using CL_SALV_HIERSEQ_TABLE

Hi,
I have to create an Hierarchical ALV with 2 Level using CL_SALV_HIERSEQ_TABLE.
The problem is; i need check boxes as well as editable fields in column. I need checkboxes at item lines (which i am able to).
Can anyone guide me how to make fields editable in CL_SALV_HIERSEQ_TABLE ?
Thanks in advance.
Regards,
Hemant

Editable fields(other than the checkboxes) are not supported using the ALV Object model(SALV classes).
Regards,
Rich Heilman

Similar Messages

Table name input. and output i need all rows and columns using procedures

hi,
question: table name input. and output i need all rows and columns by using procedures.
thanks,
To All

An example of using DBMS_SQL package to execute dynamic SQL (in this case to generate CSV data in a file)...
As sys user:
CREATE OR REPLACE DIRECTORY TEST_DIR AS '\tmp\myfiles'
GRANT READ, WRITE ON DIRECTORY TEST_DIR TO myuser
/As myuser:
CREATE OR REPLACE PROCEDURE run_query(p_sql IN VARCHAR2
                                     ,p_dir IN VARCHAR2
                                     ,p_header_file IN VARCHAR2
                                     ,p_data_file IN VARCHAR2 := NULL) IS
v_finaltxt VARCHAR2(4000);
v_v_val     VARCHAR2(4000);
v_n_val     NUMBER;
v_d_val     DATE;
v_ret       NUMBER;
c           NUMBER;
d           NUMBER;
col_cnt     INTEGER;
f           BOOLEAN;
rec_tab     DBMS_SQL.DESC_TAB;
col_num     NUMBER;
v_fh        UTL_FILE.FILE_TYPE;
v_samefile BOOLEAN := (NVL(p_data_file,p_header_file) = p_header_file);
BEGIN
c := DBMS_SQL.OPEN_CURSOR;
DBMS_SQL.PARSE(c, p_sql, DBMS_SQL.NATIVE);
d := DBMS_SQL.EXECUTE(c);
DBMS_SQL.DESCRIBE_COLUMNS(c, col_cnt, rec_tab);
FOR j in 1..col_cnt
LOOP
    CASE rec_tab(j).col_type
      WHEN 1 THEN DBMS_SQL.DEFINE_COLUMN(c,j,v_v_val,2000);
      WHEN 2 THEN DBMS_SQL.DEFINE_COLUMN(c,j,v_n_val);
      WHEN 12 THEN DBMS_SQL.DEFINE_COLUMN(c,j,v_d_val);
    ELSE
      DBMS_SQL.DEFINE_COLUMN(c,j,v_v_val,2000);
    END CASE;
END LOOP;
-- This part outputs the HEADER
v_fh := UTL_FILE.FOPEN(upper(p_dir),p_header_file,'w',32767);
FOR j in 1..col_cnt
LOOP
    v_finaltxt := ltrim(v_finaltxt||','||lower(rec_tab(j).col_name),',');
END LOOP;
-- DBMS_OUTPUT.PUT_LINE(v_finaltxt);
UTL_FILE.PUT_LINE(v_fh, v_finaltxt);
IF NOT v_samefile THEN
    UTL_FILE.FCLOSE(v_fh);
END IF;
-- This part outputs the DATA
IF NOT v_samefile THEN
    v_fh := UTL_FILE.FOPEN(upper(p_dir),p_data_file,'w',32767);
END IF;
LOOP
    v_ret := DBMS_SQL.FETCH_ROWS(c);
    EXIT WHEN v_ret = 0;
    v_finaltxt := NULL;
    FOR j in 1..col_cnt
    LOOP
      CASE rec_tab(j).col_type
        WHEN 1 THEN DBMS_SQL.COLUMN_VALUE(c,j,v_v_val);
                    v_finaltxt := ltrim(v_finaltxt||',"'||v_v_val||'"',',');
        WHEN 2 THEN DBMS_SQL.COLUMN_VALUE(c,j,v_n_val);
                    v_finaltxt := ltrim(v_finaltxt||','||v_n_val,',');
        WHEN 12 THEN DBMS_SQL.COLUMN_VALUE(c,j,v_d_val);
                    v_finaltxt := ltrim(v_finaltxt||','||to_char(v_d_val,'DD/MM/YYYY HH24:MI:SS'),',');
      ELSE
        v_finaltxt := ltrim(v_finaltxt||',"'||v_v_val||'"',',');
      END CASE;
    END LOOP;
-- DBMS_OUTPUT.PUT_LINE(v_finaltxt);
    UTL_FILE.PUT_LINE(v_fh, v_finaltxt);
END LOOP;
UTL_FILE.FCLOSE(v_fh);
DBMS_SQL.CLOSE_CURSOR(c);
END;This allows for the header row and the data to be written to seperate files if required.
e.g.
SQL> exec run_query('select * from emp','TEST_DIR','output.txt');
PL/SQL procedure successfully completed.Output.txt file contains:
empno,ename,job,mgr,hiredate,sal,comm,deptno
7369,"SMITH","CLERK",7902,17/12/1980 00:00:00,800,,20
7499,"ALLEN","SALESMAN",7698,20/02/1981 00:00:00,1600,300,30
7521,"WARD","SALESMAN",7698,22/02/1981 00:00:00,1250,500,30
7566,"JONES","MANAGER",7839,02/04/1981 00:00:00,2975,,20
7654,"MARTIN","SALESMAN",7698,28/09/1981 00:00:00,1250,1400,30
7698,"BLAKE","MANAGER",7839,01/05/1981 00:00:00,2850,,30
7782,"CLARK","MANAGER",7839,09/06/1981 00:00:00,2450,,10
7788,"SCOTT","ANALYST",7566,19/04/1987 00:00:00,3000,,20
7839,"KING","PRESIDENT",,17/11/1981 00:00:00,5000,,10
7844,"TURNER","SALESMAN",7698,08/09/1981 00:00:00,1500,0,30
7876,"ADAMS","CLERK",7788,23/05/1987 00:00:00,1100,,20
7900,"JAMES","CLERK",7698,03/12/1981 00:00:00,950,,30
7902,"FORD","ANALYST",7566,03/12/1981 00:00:00,3000,,20
7934,"MILLER","CLERK",7782,23/01/1982 00:00:00,1300,,10The procedure allows for the header and data to go to seperate files if required. Just specifying the "header" filename will put the header and data in the one file.
Adapt to output different datatypes and styles are required.

Calling rows and columns using a script

I have a file as such
1 2 PX
0.446E+00 0.867E+00-0.123E+00-0.372E+00 0.285E+00-0.640E+00-0.163E+01-0.658E+00
-0.173E+00-0.845E+00-0.446E+00-0.366E+00-0.194E+01-0.194E+01-0.214E-01-0.400E-01
-0.151E+01-0.167E+01-0.173E+01-0.232E+01-0.173E+01-0.121E+01-0.234E+01-0.277E+01
-0.126E+01 0.940E+00 0.404E+01 0.659E+01 0.513E+01 0.198E+01 0.237E+01 0.518E+01
2 2 PX
0.315E+00 0.909E+00 0.104E+00-0.475E+00 0.141E+00-0.449E+00-0.156E+01-0.751E+00
0.553E-01-0.626E+00-0.640E+00-0.494E+00-0.189E+01-0.213E+01-0.125E+00 0.285E+00
-0.132E+01-0.180E+01-0.172E+01-0.232E+01-0.187E+01-0.103E+01-0.193E+01-0.268E+01
-0.130E+01 0.974E+00 0.370E+01 0.610E+01 0.516E+01 0.218E+01 0.232E+01 0.522E+01
3 2 PX
0.217E+00 0.116E+01 0.552E+00-0.490E+00-0.892E-01-0.303E+00-0.125E+01-0.512E+00
0.315E+00-0.672E+00-0.104E+01-0.559E+00-0.162E+01-0.222E+01-0.476E+00 0.166E+00
-0.131E+01-0.167E+01-0.142E+01-0.234E+01-0.225E+01-0.901E+00-0.123E+01-0.218E+01
-0.107E+01 0.994E+00 0.320E+01 0.551E+01 0.516E+01 0.225E+01 0.193E+01 0.502E+01
4 2 PX
0.110E+01 0.169E+01 0.538E+00-0.103E+01-0.487E+00 0.154E+00 0.134E+00 0.176E+01
0.325E+01 0.179E+01-0.308E+00-0.155E+01-0.361E+01-0.457E+01-0.233E+01-0.505E+00
-0.111E+01-0.130E+01-0.128E+01-0.288E+01-0.374E+01-0.274E+01-0.232E+01-0.160E+01
0.147E+01 0.459E+01 0.612E+01 0.683E+01 0.511E+01 0.116E+01 0.203E+00 0.348E+01
Where each section (1,2,3,4...) represents a different spring element. The data is the force in the spring at time t reading from left to right and then on to the next row (i.e. row1 col1 is time t(1), row1 col2 is time t(2), etc going across)
I would like to sum the forces in each spring at time t (ie call the force at time t(1) for all elements and add them together. So that in the end I have the sum of the forces in all elements at each time t. I would then like to find the time t with the greatest sum and return to a file the force at that time for each element.
Any help would be appreciated:)

And now let's see what every part does (before I forget) and you want this right?
Command 1:
's/.*$[0-9][0-9]*$.*[0-9][0-9]* PX.* <-- matches the PX lines. "....1-inf numbers (Remember)...1-inf numbers space PX ....."
/\nSPRING: \1/' < change to SPRING: the number above and an extra newline to make paragraphs which is useful for awk below.
's/$[^E:]$$[ -]$/ <-- match a space or minus and the character before it (see NB 4 above)
\1\n\2/g' <-- and put a new line between them. This way all the numbers are on a separate line
'BEGIN { RS="";FS="\n"} <-- RS="" will match paragraphs.
{for (i=2; i<NF+1; i++) { record[(i-1)]=record[(i-1)]+$i}} <-- Field 1 is SPRING: 9, otherwise record everything by adding up. awk can handle scientific notation.
There is a i-1 with record because time starts at 1 and i at 2. This could all make more sense without the spring line.
END {for (times in record) {print record[times] "\tt=" times}}' <-- print the totals and the time that belongs with it.
Command 2:
grep 999t= <-- the output of the spring data will be of the form -999 just because it will be at the bottom of sort -rn.
$(sed -e 's/.*$[0-9][0-9]*$.*[0-9][0-9]* PX.*/\nSPRING: \1/' -e 's/$[^E:]$$[ -]$/\1\n\2/g' file | awk 'BEGIN { RS="";FS="\n"} {for (i=2; i<NF+1; i++) { record[(i-1)]=record[(i-1)]+$i} <-- identical as above.
for (i=2; i<NF+1; i++) {data[(i-1)]=data[(i-1)] $i}} <-- this will append the actual string data as opposed to adding it up and losing the original data.
END {for (times in record) {print record[times] "\tt=" times} <-- identical
for (times in data) {print "-999t=" times " " data[times]}}' <-- -999t= prepended because see above
| tee tempfile.txt <-- tee copies the data because we will match the top total force with the data of the spring
| sort -nr | head -n 1 | cut -d= -f2 <-- gives the single highest force
) tempfile.txt <-- Command becomes: grep '999t=high_number' tempfile
| sed 's/[^ ]* *//' <-- get rid of garbage at the start.

Dynamically creating table and inserting rows and columns using JSP

Hi,
I'm using mysql and JSP to create web interface for my forms/tables. I wanna create the table dynamically depending on the data in the table and for each particualar record. and these values shud be loaded on the form after loading from the databaes as soon as the form loads.
also i want to have a button which shud add new rows dynamically. and same one for columns.
how do i calculate the values across the rows on the forms
I'm new to JSP. Please point me in the right direction...any tutorials or code will be helpful.
Any help is appreciated.
Thanks
Ayesha

u write the code in sequence:
1 write jdbs to select count(* )from table
2 put in array e.g. String doc_no=new String[count];
3 write jdbs to select * from table with condition
//for no. of records just write
for(int j=0;j<(count);j++){
<% while(rs4.next()){
     doc_no=rs4.getString(2);
                    date1[i]=rs4.getString(3);
     doc_type[i]=rs4.getString(4);
     location[i]=rs4.getString(5);
     cheque[i]=rs4.getString(6);
     rate[i]=rs4.getInt(7);
     deb_qty[i]=rs4.getInt(8);
     cre_qty[i]=rs4.getInt(9);
     deb_amt[i]=rs4.getInt(10);
     cre_amt[i]=rs4.getInt(11);
     i++;
     //rs4.close();
               for(int j=0;j<(count);j++){
               System.out.println("Data count= "+j);
               %>
<tr>
<td width="15%"><font size="1"><%=doc_no[j] %></font></td>
<td width="10%"><font size="1"><%=date1[j] %></font></td>
<td width="12%"><font size="1"><%=doc_type[j] %></font></td>
<td width="9%"><font size="1"><%=location[j] %></font></td>
<td width="9%">
<div align="left"><font size="1"><%=cheque[j] %></font></div>
</td>
<td width="8%">
<div align="right"><font size="1"><%=deb_qty[j] %></font></div>
</td>
<td width="8%">
<div align="right"><font size="1"><%=cre_qty[j] %></font></div>
</td>
<td width="9%">
<div align="right"><font size="1"><%=deb_amt[j] %></font></div>
</td>
<td width="10%">
<div align="right"><font size="1"><%=cre_amt[j] %></font></div>
</td>
</tr>
write if there is any specific problem
bye,
Samir

Report with multiple dimensions in Row and Column with EvEXP

Hi
We are currently running BPC 7.0 SP3 and try to create the report(or schedule) with more 2 x 2 dimensions in the row and column.
e.g.
row dimension : Outer row is Entity, Inner row is Account
column dimension : Outer column is Time, Inner row is Category
We created the report with 2 x 2 dimensions like above e.g. with EvEXP and EvNXP, NOT EvDRE
based on default dynamic template:Template13.xlt(Nested Row, 2 x 1 dimensions defined by EvEXP and EvNXP formula).
However, when expanding the dimension with double click these dimensions or change CV of the report with 2 x 2 dimensions defined by EvEXP and EvNXP formula,
error occurs on EvEXP and EvNXP formula and can't retrieve the result correctly.
[Question]
Can't we create the report with more 2 x 2 dimensions in the row and column using EvEXP and EvNXP function ?
We understand that we can make the report with more 2 x 2 dimensions in the row and column if using EvDRE.
Thank You in advance
Kenya

Thank you for your advice.
I understand that we should use EvDRE when creating the report with multiple dimension in the row/column　because EvEXP have some erros, poor performance, etc.
Then, we have two questions.
1)
>plus they had some errors in the designs.
what kind of errors they have as an example?
2)
>If you must build the EVEXP and EVNXP, I would suggest building the template from scratch
We built the simple template with just 2 x 2 dimension from scratch.
But this report doesn't work well when double-click the dimension or changing CV...
Would you please check the following template?
<https://sapmats-de.sap-ag.de/download/download.cgi?id=RCZE1ME4YSORY3DCDO4NNMANZLBL1L5ZBUOB2F71YVNVS8XDJW>
It would be greatly appreciated if you could give me your advice for the template.
Thank you again
And my best regards,
Kenya

How to make a particular row and column field editable in ALV

Hi Experts,
I have a requirement to make a particular row and column field editable in ALV output. Like i need to make 2nd row - 4th column editable of ALV output.
Kindly help me out to solve this.
Any help would be appreciated.
Thanks,
Ashutosh

Hi Ashutosh,
please check below, explained by some experts.
In the below link editing two columns MOD_RANK and TECH_RANK.
These two columns will be in edit mode once after selecting the required record
Editing single cell in a row of ALV table
And also look for more info
http://scn.sap.com/thread/884976

Editing rows and columns in alv reports in webdynpro abap

how edit row and columns in webdynpro abap ?
can i add colors to salv repotrs for below and above range of values how ?
if possible send source code for it.............

hi
check out this link for editing the columns of ALV
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0155eb5-b6ce-2b10-3195-d9704982d69b
check out for this thread as well for coloring ALV
Coloring of selected table cells: Ideas wanted
regards,
amit

JTable - Swapping the Rows and Columns

This issue was raised in the Java Programming forum. Received initially as a weird requirement, it now seems that it is more common than you might think. Under it's original title it was "JTable - Limitation or Not?"
I introduced the topic here so that the thread perspective can include more experienced Swing developers.
The JTable in it's default layout is intended to hold database tables with records in rows. But what if you want records in columns?
Some have said why? Just accept the row layout. Others have said use a customised form. Both reasonable views. Despite this, others report that the inherrited power of the JTable is worth leveraging and they have been doing it for years. Albeit with messy code in certain cases.
This is a clear candidate for a popular derived component. If the existing JTable were renamed as a JTableRecordPerRow I am describing a JTableRecordPerColumn. The corresponding Table Model must naturally have a getRowClass method and no getColumnClass method.
Java is good at seperating data from display issues so essentially this is only a display issue. The data representation is unaffected.
While this may be so, the TableModel for a JTable makes the link from the display to the data so it must have knowledge about cell type to trigger the correct cell editor for example.
I think it is fair to say that the standard JTable has not be designed with alternative row/column or column/row displays in mind. Hence a single getColumnClass method. However implementing a Table model which exchanges columns for rows is a good start. This leaves a few loose ends where editting is concerned.
While this may not be an ideal topic for anyone just learning Swing I have been encouraged to consider the general case within the limitations of the cell types normally supported by the default Table model.
I would have a guess that this is an established component in many private Java libraries already.
Views and experience on this topic extremely welcome.

It appears to me that while interchanging the rows and columns of a JTable is not trivial it is still worthwhile as a workhorse component.
Perhaps the original design could have allowed for an aternative layout manager of somekind but this could easily have made description of records/rows and fields/columns confusing.
I will probably get this summary wrong but I aill attempt to collate the neatest approach as I see it. Criticisms or shorter steps welcome. My thanks to the original contributors traceable from this thread.
In the descriptions below a distinction is made between the normal internal data model representation of a row, called "mrow", and the displayed form "row".
Only the TableModel need be changed.
1 Use row 0 to show the headers by a)disabling the normal TableHeader renderer b)setting the cell renderer for column 0 to the default renderer used by the TableHeader and c)using the getValueAt method to return mcol header values for the row entries.
2 For other row, col values to getValueAt return the value at mcol, mrow where mcol==row-1 & mrow==col.
3 Create a new getCellClass(col,row) method to return the class where mrow==0 and mcol==row-1. Note that I am only trying to immitate the common use of of a database record per mrow here.
4 Override a)getCellRenderer and b)getCellEditor to use getCellClass
Four steps with seven parts seems worth it to me.
The power of Swing!
Many thanks to all.

Is it possible to switch the rows and columns?

Is it possible to switch the rows and columns of a table? The reason I ask is that it would be easier for me to input the data with the number at the top of a column and the fields going down. But it would be easier to read the data with the number on the left and the fields going to the right. Is it possible to switch a table in this way?

mahongue wrote:
Is it possible to switch the rows and columns of a table? The reason I ask is
that it would be easier for me to input the data with the number at the top
of a column and the fields going down. But it would be easier to read the
data with the number on the left and the fields going to the right. Is it
possible to switch a table in this way?
It sounds to me as though you wish to transpose a table so that the original is changed from rows to columns and from columns to rows, as in the following:
Table 1
    A   B   C
========
1   o   p   q
2   r   s   t
3   u   v   w
Table 2
    A   B   C
========
1   o   r   u
2   p   s   v
3   q   t   w
You are right - it would be nice to have a menu item to magically transpose a selected block of cells. But there isn't one. So...
One way to solve this is to use the index() and transpose() functions to accomplish row and column cell transposition. If you are going to use a 1:1 cell correspondence and change the header columns and rows also, you can use this:
   =INDEX(TRANSPOSE(Table # :: <range>),ROW(),COLUMN())
where Table # and <range> is substituted as in the following fashion:
   =INDEX(TRANSPOSE(Table 1 :: $A$1:$C$3),ROW(),COLUMN())
Create a second table. Copy the modified formula above with the appropriate substitutions, select the range you wish to have your transposition inserted into (must match the transposed cell dimensions of the original range), paste the forumula and voila! the cells will be transposed.
Cautions:
o The target table must match the swapped cell length and width dimension. For example, if the original data range is 6 columns wide by 4 rows deep, then the corresponding table or range to hold the transposition must be 4 columns wide by 6 rows deep.
o If your transposed data block is to be offset from the origin of the new table, then you will need to include a subtractive offset into your cell formula, since in the transpose() function the data in the master data range is referenced from its position with the master range, not its cell position in the table. Such an offset is necessary because this example formula uses the target row and column numbers to arrive at indexed positions.
For example, if the new data range is to be offset one column to the right and one row below from the target table's origin then you must subtract (-1) from the cell and from the column references in the formula:
  Example:
  =INDEX(TRANSPOSE(Table 3 :: $B$2:$D$4),ROW()-1,COLUMN()-1)
If someone has a better solution I'd be glad to hear of it.

How can I make Numbers respect the row and column locks in an Excel workbook opened in Numbers???

I have a Windows server app that generates Excel workbooks to be emailed to political campaign volunteers to be loaded into Numbers on an iPad, edited, then emailed back to be posted to the server database. There are two problems encountered:
1. The Excel workbook has the first row (column headings) and first column (route identifier) of cells locked, so that they will not scroll off the screen, but Numbers doesn't respect the locks, so when the user scrolls horizontally or vertically, the column headings and/or the route identifier scroll off the screen.
2. The Excel workbook has pop-up "tool-tip" type comments in certain column headings in order to provide the user with the acceptable entries for those columns, but Numbers does not respect those. When the user touches any of the commented column heading cells, a context menu appears instead of the comment.
What must I do in the Excel workbook sheets, or what settings can be made in Numbers to correct the above?

I imported a Numbers '09 file into Numbers on the iPad. All comments were removed during import. Frozen header row and column were retained.
Thank you for your responses I must ask, however, when you refer to "importing" the Excel file, are you referring to a two step process whereby the Excel file is first converted by some other process into Numbers format, then opened in the Numbers application - which is what I have to do in my PC application to generate the Excel file, and reverse that process to convert the Excel back into my database format - or are you simply referring to opening the file in Numbers as "importing" it? And please excuse any ignorance, as I'm not at all familiar with Apple's terminologies. In fact, I don't own an iPad myself, but rather I have to depend on one of my clients to do the testing for me.
I imported an XLSX file into Numbers on the iPad. The file used "freeze panes" to "freeze" the first column and row. Only warning on import was that it changed fonts. It imported without the first row and column frozen and with no comments. Nothing I can do about the missing comments but it was a simple matter to turn the first column & row into headers and freeze them.
Unfortunately this would not be an efficient solution, since the end users are, for the most part, elderly political campaign volunteers who are fairly computer illiterate. These workbooks are actually canvassing lists - known as walklists. Their purpose is for the volunteers to interview voters, record the results of the interviews, and post the results to a database, which provides the campaigns with valuable strategizing capabilities. Also, these workbooks have multiple pages - as many as 10 or more. and from what I infer from the above, the setting changes would have to be made on each page.
My whole intent in developing this iPad/Tablet methodology was to significantly reduce volunteer's work - which is a recruitment benefit - and eliminate paper. While the latter would be accomplished, the former would not, and in fact would tend to increase it. It's necessary to keep the first row - column headings - and the first column - the route identifier - from scrolling off the page, so that the volunteer won't have to keep scrolling up and down and right and left to know what the data are.
Conclusion: Comments are not supported on the iPad version of Numbers. Frozen headers are not imported from Excel but can be recreated easily.
I was previously directed to the Apple website http://www.apple.com/ipad/from-the-app-store/apps-by-apple/numbers.html which extols the wonders of the Numbers application. About halfway down the page there's a section regarding, "Sliders steppers and pop-ups". The web page states that pop-ups can be set up but, being a marketing site, gives no indication whatsoever as to how it's done. I was hoping someone could tell my if there's any way to carry them over from an Excel file.

Limitation of row and column in FR report

Hi all,
i want to know what is the maximum number of row and column that we can display in FR report.
and is there any possibility to increase the number of row and column in FR reports,if yes then how?
Thanks in advance.

Hi Andy,
I think your asking if this or something similar could be used to go to another page rather than as a popup? The answer is yes. since you have already done the decode in your query, you can just go to the Report Attributes tab (I'm using version 2.2.1.00.04) and click the edit button for the column. Then, you can simply go to the
HTML Expression [Insert column value] text area and insert:
<!--
<b>#A#<b>
This will give you everything that is in the column link section, but I find it easier to work with since it's all together (personal preference).
I reread your post and realized that you wanted to pass the A as a value and not the summary value of the column. I simply removed the #'s. I think this should work. I also kept the summary value using the #A# as the link. I belive that you can copy and paste this into each column (replacing the A with the appropriate column header of course...).
If I were doing this I might create a CASE statement in the query and evaluate for null before creating the link. Here is an example of using that approach:
CASE WHEN "STATUS" = 'U' AND ("CREATEDBY"=:APP_USER OR :APP_USER='MY_USER')
THEN ''
|| '<img src="#WORKSPACE_IMAGES#edit.gif" border="0" alt="Click here to Edit">'
|| ''
ELSE ''
END LINK,
Neil

Arrays[][] - row and column

Evening All...
Just a quick question regarding arrays. My program is working but I am trying to tidy it up.
public class Arrays{
static int firstArray[][]= new int [][] {{8,5},{9,3}};
static int secondArray[][]= new int [][] {{1,7},{4,8}};
static int thirdArray[][]= new int [][] {{0,2,4},{9,6,8}};
     static int fourthArray[][]= new int [][] {{2,1,0},{6,2,3}};
public static void main(String[] args)
     multiply(secondArray,firstArray);
     multiply(firstArray,thirdArray);
     public static void multiply( int[][] x, int[][] z)
     int array2[][] = new int [3][3];
     int 1r = x.length;
     int 1c = x[0].length;
     int 2r = z.length;
     int 2c = z[0].length;
     //for(etc...)
//      (Rest of program)
I want to edit the array.--------int array2[] = new int[3][3]; (up 9 lines)
Instead of specifying it as [3][3] for size.
I would like to say new int - length of row and column - im pretty sure it is similar to
the ints below - but cant seem to get the correct combination.
Thanks in advance for any help folks.

- you can use variables to specify array dimensions
- you can get the (1D) dimension of an array by using the "attribute" theArray.length . Knowing that a 2D-array is indeed an array of arrays, you can indirectky get the size oif the second dimension too:
public static void multiply( int[][] x, int[][] z)
int array2[][] = new int [x.length][x[0].length];
}Of course this shoud be robustified to protect against x or x[0] being null (but in this case the multiplication is probably doomed anyway).
Regards,
J
Edited by: jduprez on Mar 14, 2011 10:45 PM
And please, in the future, use tags around code text, when posting code

Select row and column from header in jtable

hello i have a problem to select row and column from header in jtable..
can somebody give me an idea on how to write the program on it.

Hi Vicky Liu,
Thank you for your reply. I'm sorry for not clear question.
Answer for your question:
1. First value of Open is item fiels in Dataset2 and this value only for first month (january). But for other month Open value get from Close in previous month.
* I have 2 Dataset , Dataset1 is all data for show in my report. Dataset2 is only first Open for first month
2. the picture for detail of my report
Detail for Red number:
1. tb_Open -> tb_Close in previous month but first month from item field in Dataset2
espression =FormatNumber(Code.GetOpening(Fields!month.Value,First(Fields!open.Value, "Dataset2")))
2. tb_TOTAL1 group on item_part = 1
expression =FormatNumber(Sum(CDbl(Fields!budget.Value)))
3. tb_TOTAL2 group on item_part = 3 or item_part = 4
expression =FormatNumber(Sum(CDbl(Fields!budget.Value)) + ReportItems!tb_TOTAL1.Value )
4. tb_TOTAL3 group on item_part = 2
expression =FormatNumber(Sum(CDbl(Fields!budget.Value)) - ReportItems!tb_TOTAL2 .Value)
5. tb_Close -> calculate from tb_TOTAL3 - tb_Open
expression =FormatNumber(Code.GetClosing(ReportItems!tb_TOTAL3.Value,ReportItems!tb_Open.Value))
I want to calculate the value of tb_Open and tb_Close. I try to use custom code for calculate them. tb_close is correct but tb_Open is not correct that show value = 0 .
My custom code:
Dim Shared prev_close As Double
Dim Shared now_close As Double
Dim Shared now_open As Double
Public Function GetClosing(TOTAL3 as Double,NowOpening as Double)
    now_close = TOTAL3 + NowOpening
    prev_close = now_close
    Return now_close
End Function
Public Function GetOpening(Month as String,NowOpen as Double)
    If Month = "1" Then
        now_open = NowOpen
    Else
        now_open = prev_close
    End If
    Return now_open
End Function
Thanks alot for your help!
Regards
Panda A

Sum calculated rows and columns

I have written a SQL report to count the number of offenses by levels of disciplinary actions. Now I want to total
the counts for the rows and columns. How do I do this? Below is my code. It produces column headings with counts. Ie.
Offense Description   Level I Level II Susps Terms
2 Minor Violations      0         1
0    0
SELECT
UPPER(DESCRIPTION) as OFFENSE,
SUM(CASE
WHEN OUTCOME = 'LEVEL I'
THEN 1
ELSE 0
END) as LEVELI,
SUM(CASE
WHEN OUTCOME = 'LEVEL II'
THEN 1
ELSE 0
END) as LEVELII,
SUM(CASE
WHEN OUTCOME = 'SUSPEND'
THEN 1
ELSE 0
END) as SUSPEND,
SUM(CASE
WHEN OUTCOME = 'TERM'
THEN 1
ELSE 0
END) as TERM
FROM
PAGRDI
Where
R_DATE >= '2014-01-01' and R_DATE <= '2014-01-31'
Group by
DESCRIPTION
Order by
OFFENSE

Hi Wildcatgirl,
According to your description, you have used T-SQL to get the counts for different OUTCOME. Now you want to get the total for each OFFENSE and OUTCOME. Right?
In this scenario, since you have already get those counts with T-SQL query, so in your dataset it will have data fields below: OFFENSE, LevelI, LevelII, SUSPEND, TERM. We just need to drag these data fields into a table, add a column at the end of the table
and use expression to sum the counts for different OUTCOME. Then we can add a total for the detail row. We have tested this scenario in our local environment. Here are screenshots for your reference:
Reference:
Tables (Report Builder and SSRS)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Populate multiple rows and columns based off of a single cell

Does anyone know a way to populate multiple rows and columns based off of the input of a single cell. I'm trying to create a workout tracker that auto populates from a master list of workouts. Example, in A2 the user selects the workout from a drop down menu (St1, St2, St3, etc) and the workout is pulled from the master list and is populated into B2:C5.
I'm using =LOOKUP(A2,Master :: A2:A32,Master :: C2:C32) right now, but it's only drawing the top column. I'm looking for an edit for the formula (or completely new formula) that will place the info from the 1st column of the Master table into the 1st column of the Auto Tracker 1 table and then on down until the 4th column.
Here is a screen shot of what I have now:
And an example of what I'd like to accomplish:
Any and all help is appreciated, and please let me know if there is any more info that I can give that'd help out.

Hi Mike,
Your screenshots show that you have merged some cells in Column A of both tables. That may be the reason why the LOOKUP function is having trouble working out which range of cells to examine.
Hope this helps.
Regards,
Ian.

Editable fields (Rows and columns) using CL_SALV_HIERSEQ_TABLE

Similar Messages

Maybe you are looking for