Editing a TIFF Original not kicking off Re-Publish

When I modify a TIFF Files in a smart collection that is in a SmugMug Publish Service (items selected by Flagged and From a specific Folder), they do not come up as needing to be re-published. Files that are still DNG files, trigger the republish, but TIFF files do not. Interestingly, being in the smart collection does not show up as collections that file is part of (regardless of DNG or TIFF). If I modify the TIFF in lightroom, that will trigger the republish, but not if I just edit the TIFF in CS6 (edit the original).

I ran into the same problem using the pattern for expected state detection:
/Person[DetectedRulesList = Set[ObjectID='<GUID of the Set with the DREs>']/ComputedMember]
Pasted from <http://technet.microsoft.com/en-us/library/ff608269(v=ws.10).aspx>
My users weren't transitioning into the set when they got a DRE. Went on a wild goose chase until I saw this post. Enabling the
FIM_MaintainSetsJob fixed
the problem. Pretty frustrating...

Similar Messages

Global rules not kicking off when calling CHECKIN_NEW webservice

Hi All,
We are trying to call CHECKIN_NEW/CHECKIN_UNIVERSAL web services with mandatory fields like doctype, securitygroup, title, primary file etc..
It is working fine, but the global rules were not kicking off.
Ex: Say, we have a rule that says Field_A is mandatory when SecurityGroup=Public.
But when we are invoking the webservice with SecurityGroup=Public, content is getting checked-in even though we are not passing the Field_A value.
We need the global rules to kick-off and give us error/warning that there is field missing...
Can you please let us know if we are missing something here, or there is other way to get this requirement?
Thanks in advance,
Cheers,
-V

Hi,
I now tested with RIDC code below, but still the global rule is not kicking off. I ahve a global rule, which says "xSwcDocumentSubType" should be mandatory. But if we see code below, i commented out that value, but still content is getting checked in.
Can you please point me if i am missing anything here?
IdcClientManager manager = new IdcClientManager();
// build a client that will communicate using the HTTP protocol
IdcClient idcClient = manager.createClient("http://xxx:xxx/cs/idcplg");
// create an identity with a password
IdcContext userPasswordContext = new IdcContext("xxx", "xxx");
// create request
DataBinder binder = idcClient.createBinder();
binder.putLocal ("IdcService", "CHECKIN_NEW");
// get the binder
binder.putLocal ("dDocTitle", "RIDC File3");
binder.putLocal ("dDocType", "Statement");
//binder.putLocal ("xSwcDocumentSubType", "317");
binder.putLocal ("dSecurityGroup", "Public");
// add a file
//binder.addFile ("primaryFile", new TransferFile ("test.doc"));
binder.addFile ("primaryFile", new File ("D:\\RIDC.txt"));
// check in the file
ServiceResponse response = idcClient.sendRequest(userPasswordContext, binder);
String responseString = response.getResponseAsString ();
System.out.println(responseString);
Edited by: 921097 on 18/03/2012 17:59

Payables Transfer to General Ledger does not kick off Journal Import

Hello,
This is on 11.5.10.2.
We have some invoice batches that are not posted in GL. This problem is sporadic and only happens for some batches and not all. It is unclear to why some batches are posted fine and others are not.
The problem is at payable trasnfer to General Ledger program. After these batches are validated and create accounting has been executed successfully, we submit Payables Trsnfer to General Ledger program.
This program does not kick of Journal Import child process for these batches. It just completes normally without showing any error detail on log/output.
What could be the reason? Why Payables Transfer to General Ledger is not kicking off Journal Import for these batches?
I have even verified GL_INTERFACE and there is nothing there.
Please advise.
Thanks
D

Are these invoices accounted, and was create accounting done for these Invoices?
If so these should be available for the import.

Java Applet not kicking off thru "Self Service"

Cloned New Application Environment using production alike environment, I could login and navigate and view forms for various application users.
But After login thru self service and click on any options under right panel, it hangs with out kicking off Java Applet and next screens.
Any help is highly appreciated.
Regards
Rao

sorry, I could login and navigate and view forms for various application users using normal login "host:8582/dev60cgi/f60cgi?" But not thru self service.
Thanks

FIM 2010 - Set Population not kicking off workflow

Hi,
I am having a problem with Set Transition kicking of a MPR, in FIM 2010 R2 which I have never seen before after numerous implementations of both FIM and FIM R2.
Scenario:
My MPR kicks off a workflow which adds 6 sync rules, to users based on the "set transition in" set with criteria IsADConnected=true.
The user is transitioned into this set but the MPR never fires. Everything is enabled and I have checked everything obvious. When I view the set in the "Sets" screen in FIM I can see that the user has transitioned in, and is a computed member based
on my criteria "IsADConnected=true"
The "FIM_MaintainSetsJob" job runs at 1am which auto corrects set membership and this does cause the MPR to kick off and consequently the sync rules to be applied. So it does work, just not when it should.
What I have tried to fix this:
Created a new workflow, set and MPR which does exactly the same job as the "broken" Set/MPR/workflow - Same thing happens (ie. it doesn't work)
I read on one post that someone re-indexed the FIM service database and this fixed it for them - I tried this also but no joy. (some indexes were at 98/99% but they have been reduced after reindexing)
Has anyone ran into this issue before and does anyone have any idea what can cause it? It's doing my head in at this stage!
Thanks
Paul

I ran into the same problem using the pattern for expected state detection:
/Person[DetectedRulesList = Set[ObjectID='<GUID of the Set with the DREs>']/ComputedMember]
Pasted from <http://technet.microsoft.com/en-us/library/ff608269(v=ws.10).aspx>
My users weren't transitioning into the set when they got a DRE. Went on a wild goose chase until I saw this post. Enabling the
FIM_MaintainSetsJob fixed
the problem. Pretty frustrating...

Edited hyperlinked shape images not hyperlinking properly when published

At my website:
www.trianglepolysteel.com
I've tried to add and edit hyperlinked shape images at the top of the page, namely "The PolySteel Systems" and "FAQs". No matter what I do--bring to front, recreate a brand new image, copy and paste one I know works--the published version does not hyperlink properly. I unselect "make all hyperlinks inactive" in the hyperlink inspector pane, rollover my mouse to ensure that all buttons take me to the proper place, then click them to prove it. Works in iWeb, not on the published page.
Does anyone know how iWeb creates the code? When I save changes I've made, does it rewrite code for the entire page, or does it plug in edits at the end of the existing code? When I go in to view source in safari, it looks like it put the two edited/added images in a different location.
Help! Visitors/potential customers are missing a valuable link on my site.
Bradley

OT,
Yes, each is its own image, as making one text box and hyperlinking each word/phrase results in the unchangeable (arrrgh!) grey underlined text that changes to red on rollover.
I've already been experimenting with exactly what you mentioned. I just tried shrinking all the image boxes, without encroaching on the text, so they would clearly not overlap. I'm publishing to me.com for these experiments so I don't have to keep publishing the entire site to a folder, then ftping to my server. Here's the page I just experimented with:
http://web.mac.com/bradleyoder/iWeb/Triangle%20PolySteel/WhatIsPolySteel.html
In iWeb, all links are good to go, no overlapping, etc. Curiously enough, on this page, there are even more dysfunctional hyperlinks with those image boxes.
Any further thoughts?
Bradley

I have an original iMac running on 10.4.11. I am kicked off the internet because it is asking for a Keychain password - I do not have a keychain password.

I have an original iMac running on 10.4.11. Suddenly I could not sign on to my browser, although I was connected to the internet - with 4 bars. I would get signed on and then get kicked off because Safari was requesting a Keychain password. I never used keychain so did not have a password.
Eventually i tried to reload the original software, but am niow unable to get the computer restarted and startup disk is in the machine. I have tried to start by holding down the "C" key, but after the apple comes on it reverts to a "Darwin message"

Try holding down the option key then power on. This brings up the startup manager. Click on your hd. Click on right arrow key.
What does the darwin mesage say?
Run hardware test.
The orginal iMac had a 15inch crt screen.
To eject the dvd.
power off your machine. hold down your left mouse button. power on your machine. This should eject the cd.
Eject cd
Here is a web page on twelve ways to eject the cd.
http://www.osxfaq.com/dailytips/01-2003/01-16.ws
On a PowerPC-based Macintosh (but not an Intel-based Macintosh), you may use Open Firmware to eject a CD or DVD disc when normal methods for ejecting it have not succeeded.
Immediately after the startup sound, press and hold the key combination Command-Option-o-f. Enter commands:
eject cd
mac-boot
http://docs.info.apple.com/article.html?artnum=106752

I am having trouble connecting to my network all of a sudden. It is not an issue with the service/router. I keep getting kicked off and getting a ! in my airport... anyone know what's up with this?

I am having trouble connecting to my network all of a sudden. I am able to connect to other networks but not my own. It is not an issue with the service/router because other devices connect fine. I keep getting kicked off and getting a ! in my airport. Last time it happended I called apple and the suggested I wipe my HD and reinstall everything. I did and it did not work. One day I turned my laptop on and it connected no problem. Now it has kicked me off again. I tried resetting my IP address but that does not work either! Has anyone had this problem?

Try this:
Apple menu / System Preferences / Network.
Click Location: and select Edit Locations..
Click + (plus sign), and enter a name for the new location - anything will do.
Apply this.

Error message: The preset used by one or more sequences in this project requires third-party components that could not be located. These sequences will be modified to use a custom sequence setting instead. To continue editing using the original preset, qu

Hello all,
I can't open a PP project without this error message appearing:
"The preset used by one or more sequences in this project requires third-party components that could not be located. These sequences will be modified to use a custom sequence setting instead. To continue editing using the original preset, quit the application without saving the project, reinstall any third-party components that are required and reopen the project".
What I had been doing before this occurred was editing a PP project using ProRes sequences and multi-camera editing. Multi-camera was not working very well and after a few attempts to fix that I gave up and finished the job cutting 3 layers of video instead. AME refused to render the three finished sequences of over 1hr duration so rendered final videos from the PP sequences.
I tried deleting plists for AME, PP and QT, repairing disc permissions and rebooting but there was no improvement.
Client is satisfied for now but will want to come back to this job at a later date so decided to uninstall and re-install AME and PP in the hope both would be ready to work properly when needed again. AME works fine in conjunction with a different PP project but now I can't open the PP project in question without the above error message appearing.
Having searched the net it would seem that the problem may be caused by ProRes but I haven't been able to find a definitive solution for the problem. Does anyone know either:
1. How to fix this?
2. If I chose the "modified using a custom sequence setting", can I be sure that my sequences will look the same even if they don't use ProRes? The final deliverable format will be mp4 so as long as the overall look doesn't change then I can afford a change in the edit codec. It's just that with three sequences over an hour long, I don't want days of work to be ruined.
Other older PP projects of mine open and work fine.
Premiere Pro CC 8.2.0
Media Encoder CC 8.2.0.54
OSX 10.10.2
Any help would be greatly appreciated.
Duncan.

Adobe web chat come up with a solution.
Open the PP project.
Export your sequence or project as a Final Cut Pro XML file.
Set up a new PP project.
Import the Final Cut Pro XML file.
This will get you back up an running.
Since getting back to editing this project I have found that some things will be lost or change in using XML:
You will lose position key framing, black video clips, dissolve fx, audio levels, audio dynamic fx, the ability to open a multi camera clip and change the camera view.
You will keep cut points, crop fx.
Not perfect but only took a couple of hours to save 3 days work.

EA4500 2 questions-- linksyssmartwifi not working fine and kick off users

I have my new EA4500 router and following 2 questions confused me.
1. I have registered my router with linksyssmartwifi.com and after router reboot or reconnect to internet, I can access to my router using my IOS devices or android devices. But after half an hour or even 15 minutes, the router will not be accessed anymore. There's an error message saying my router is not connect to internet, but at the same time devices in local LAN can access to Internet and also I can access my NAS through EA4500 from internet. I have reset the devices several times but this issue still there. Any suggestions?
2. Is it possible to kick off the WIFI devices using local admin web access or linksys smart wifi tool? Or need any other software to make it possible?
Thanks

When you received that error message on your phone, are you still getting internet access connected to your router's wifi network? If so, then I think the router is fine because it is transmitting internet connection to your phone and other devices. You don't have to reset the device. I think it's the app that's having the problem. You can try uninstalling and reinstalling the app or close/reopen the app.
Another way to isolate the problem is to access linksys smart wifi on a wired or wireless computer. Check if it's receiving the same error message as your phone after several minutes. If linksys smart wifi on the computer is not giving you that error message, then definitely, it's an app issue.
Regarding your second question, you can choose any of the options below to prevent internet access from a specific device:
1. Block internet access on particular device using parental control. This will block internet access but the device is still connected to the network so it still has access to shared files or NAS.
2. Change your router wireless password. This will disconnect devices that you don't want to have access to the network, unless the user finds a way to know your new password.
3. Enable mac filtering on your router. Mac filtering is in the wireless tab of linksys smart wifi. Select “Deny” access for the listed mac address , add the mac address of the device you don't want to give wifi access then click apply.
I tried these steps before and they worked just fine.

I keep getting kicked off of my wifi with my MacBook Pro but not with my IPAD?

I keep getting kicked off of my wifi with my MacBook Pro but not with my IPAD, what do I do?

Hi, mmayers.
Sometimes a simple power cycle of the router can correct the issue that you are experiencing. However, the issue could be a little more complex. Wi-Fi routers need adjustments to settings periodically for optimized performance with the constant progression of wireless device technology. Below, I have included two articles. The first article will cover basic Wi-Fi troubleshooting. The second article covers the recommended settings for current Wi-Fi access points.
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/ht4199
Cheers,
Jason H.

I am having issues with being kicked off the internet intermittently. ATT says its not an issue with their service. Does anyone have an idea?

I am having issues with being kicked off the internet intermittently. ATT states its not an issue with their service. Any ideas?

Yes it is NOT your internet service. It is Apples OSX. It seems to be happening to older computers trying to run the newer OSX ( Mavericks and newer). I have a 2009 iMac I bought with Leopard installed, I upgraded to Snow leopard 10.6.8 and my computer was running flawlessly. I upgraded to Mountain Lion and I noticed my computer running slower... kind of annoying having to wait longer for everything (start up, browsers opening up, apps opening up, mail opening up and so on) Mavericks came out for free and I was excited to get out of this issue. Well, everything went from bad to terrible! Fast user switching had a glitch with desktop picture resetting to the wave, mail rules didn't work properly and I kept getting kicked off the internet (Absolutely NOTHING wrong with my internet). No one could figure out what was going on or how to fix it, even senior Apple tech's! After 3-4 months of searching, troubleshooting and waiting for a fix, I looked at my Mac Pro running Tiger 10.4.11 with no issues what so ever... that is when I made an executive decision. GO BACK TO SNOW LEOPARD! Since May 2014 I have been running 10.6.8 on my 2009 iMac and it has been smoking fast with NO issues what so ever, especially since I maxed out my memory for Mavericks. So to sum it up: some people might get lucky with old machines running new operating systems, but for the most part, it seems older processors can't keep up with the new sophisticated operating systems. Mavericks... Yosemite... FREE UPGRADE! But you will pay the price

Kicked off from WEBI when click on Edit in the webi report

I have admin right, and this happened first time. When I click on the edit, I got kicked off. The application shut down itself. And then there is the log from java...hs_err_pid517. I found there are 3 folders in my program files. Any suggestions?

i had this many time before
you get the window closed and some file added to your desktop
this is caused by the java,
so you did the right thing to install a new java.
good luck
Amr

HT4972 I updated my ipad to ios 5 because I kept getting kicked off of my wifi network. Upgrading did not help. Are there any other solutions? (I've also tried resetting the network settings)

My ipad keeps kicking me off of my known wifi network. I turned off the wifi and turned it back on, reset the network, and finally upgraded to ios5 but I keep getting kicked off. My laptop is connected so it's not a wifi issue. The ipad is a first generation one..Any help is appreciated

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Original iPad will not shut off

Ipad will not shut off. The little wheel icon keeps coming on. The start screen blinks on & then off, repeating with the little wheel popping up.

Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

Editing a TIFF Original not kicking off Re-Publish

Similar Messages

Maybe you are looking for