Editor bug if you drag a case structure over an index/replace elements node on a in place structure

To reproduce:
Drag a case structure over a index/replace array node
You'll end up with this train wreck. Autocleanup no longer works
Interestingly, you can still get it to compile but setting the boolean to true doesn't run the true case. Warning: dragging the below snippet onto your block diagram will probably crash LabVIEW
Select all that and drag it into a new VI. Run autocleanup and the development environment will crash: Exception: Noncontinuable exception (0xC0000025) at EIP=0x00000000
Running LabVIEW 2014 SP1 with nothing special.

To quote Obi-Wan
This is not the bug you are looking for..........
Now search for "Clear as mud"
Having a Wired treminal inside an IPE driving conditional code should break the snot out of that code and cause the compiler to puke all over! The lack of check for that insanity is causing the crash! Don't do it! Just think of how you are abusing the poor IPE. What if you had a breakpoint on the Inplace Boundary and changed the boolean? That would necessatate a copy inside an inplace structure....... NO!!!!
Or, more to the point as best I understand: (Add duct tape adound head as needed)
An IPE must exist in one "Clump" Terminal Reads exisist in their own "Clump" (although you can read many terminals in one clump) So you require a clump to read the boolean terminal inside another clump. Clumps cannot reside in clumps since clumps are clumps that stand apart from each other by definition. The run arrow should be broken but is not- hence LabVIEW crashes. Makes sence to me except the clumping algorythm didn't catch the insanity and the run arrow wasn't broken. so the next edit caused all hell to break loose.
(If I missed domething here I am going to learn something today)
Jeff

Similar Messages

How do you get the value of an ELEMENT node?

Which API call do you use to get the value of a simple element node, e.g. <element>value</element>
The comments for getNodeValue in the header file oraxml.h says
This function returns the "value" (e.g. associated data) for the given node. Only COMMENT, CDATA and TEXT nodes have data, all others return NULL.
I've used an xpath expression to select the node that I want but now I can't get the value of the node because it is of type ELEMENT.
When use getNodeValue I get NULL just like the comment says. Not sure what to try next.

For parsing with XPath
http://www.oracle.com/technology/pub/notes/technote_domparser.html

How do you set the number of rows in a spreadsheet, so that even when you drag data in, in writes over those rows instead of adding a new row?

How do you set the number of rows you want in a spreadsheet, so that even when you drag data in, in writes over those rows instead of adding a new row?

After the discovery reported above, I filed this report :
Bug ID# 10073038
Summary:
When Numbers is used on a system with decimal comma a csv file may be good AND wrong
Steps to Reproduce:
With Numbers v2, you introduced an interesting enhancement.
In system using the comma as decimal separator, Numbers requires csv files using the semi-colon as values delimiter.
In fact it’s true if we OPEN the document dragging its icon on Numbers one or thru the open dialog.
This said.
(1) Drag and drop a csv built with the 'semi-colon' standard on a table or on a sheet
(2) Drag and drop a csv built with the 'comma' standard on a table or on a sheet
Expected Results:
Every normally constituted user assume that in
case (1) he will get a perfectly built table
case (2) he will get every cells of a row in a single cell
Actual Results:
In fact you forgot the drag and drop way of use and in
case (1) every values separated by semi-colon are inserted in a single cell
case (2) values separated by comma are correctly spread in a table
isn’t it ridiculous ?
Regression:
Except looking in QuickView to see which is exactly the structure of the file to decide the way we will insert it in a Numbers document, we may use an applescript fair enough to replace the semi-colons by TAB characters
or
to replace the commas by TABs and the decimal periods by commas
Notes:
While I am on this subject, I wish to make two proposals:
(1) It would be fine to format the date according to the ISO format year-mm-dd when you export a Numbers doc to csv.
Doing that, dates would be imported correctly in every countries.
At this time, on an English system, you export as mm/dd/year.
If the doc is open on a system using the format dd/mm/year, the results will be odd.
On a system using the format dd/mm/year, you export this way and so, if the doc is open on a system using the format mm/dd/year the results are odd too.
As every localized versions accept the ISO format (at least on entry), using it in the export scheme would give a correct behavior everywhere.
(2) It would be fine to add the format Tab Separated Values in the Export pane.
TSV + ISO date format would give documents opening flawlessly everywhere.
Yvan KOENIG (VALLAURIS, France) dimanche 4 septembre 2011 21:27:41
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community

Tentative bug report: property node (and other objects) resizes structure in which they are dropped even when this is not needed

This one has bugged me for a while, so, since I am in a mood to report annoying features, here it is:
On the diagram, when you drop an object that could have its size increased by user action (for instance a property node in which you chose "Value", which is a short property, but you could later change this to a "longer" one, which admittedly might require more space on the diagram), a case structure in which you drop it, will automatically increase its size.
Let me illustrate this with ONE example (can be reproduced with other objects such as enums, clusters, etc...).
Here is a simple diagram:
Note that I am going to create a property node from the front panel. This, for a reason that makes the beauty of this "feature", is very important. Apparently, if you create the property node from the diagram, nothing weird happens. The exact location where I will drop the node is not very important but needs to be close enough from the border.
Here is the result (LV 2011 but as I said, this has bugged me for a few versions already):
Basically, the case structure (and the whole diagram as a matter of fact) has expanded.
This is particularly annoying, say, when you are creating a diagram with 10 cases in a case structure and you start dropping things such as property nodes in each case: the structure keeps growing, and growing, and growing...
That also works with Event structure, and I am ready to bet, with other as well.
As I said, it is also not limited to Property nodes. I have noticed that this happens if you drop a cluster constant that contains an enum (presumably because some of the enumerated strings are longer than others).
I could speculate why this is the case, but that is not my job.

Actually, this might not be true. I found a variant of this behavior. With "Place Structure with Auto Grow enabled" unchecked, here is what I observed while dropping a property node on my diagram:
Before:
After:
This is the expected behavior. The Property Node is partly hidden inside the Case Structure I dropped it in. Now that's not what I wanted to do. I wanted to drop it in in the innermost Case Structure:
The problem is that now this Structure has grown (as has the whole diagram) to leave space for the whole Property Node:
It is a subtle bug in the sense that I tried to reproduce it on a new VI with a series of nested Case Structures, but it did not result in this behavior.
Anybody caring to comment?

JDev's editor bug

The JDev editor gets instanble after setting the following string '<%>'.
As soon as it it placed you will not be able to see the bottom of the document. So far i only tested it with the JSP's editor.
If you start by placing '<%' the editor won't let you place '>'. But if after you press that key('>') and press the mouse anywhere in the editor(force the input of the char), it will be printed and the editor will be all cracked out.
Only tryed placing the '<%>' at the end of the document, din't test if it has the same behavier(not sure if it's written like this :P ) when placed anywhere in the document.
By the way,
I'm using the version 9.0.3.1035
To undo the error press ctrl+a to select all the text of jthe document, afterwards open other editor(besides jdev) and remove the tag(<%>) you placed. After removing do the samething but on the opposite direction.
Daniel Campelo

We're tracking this via bug ID 2789824 - if you have a support contract, this is visible on http://metalink.oracle.com.
Thanks,
Brian
JDev Team

Can you drag photos/elements into PSE 9.0 on Mac

hello, I just switched to a Mac and am using PSE 9.0. Can you drag photos or elements into the project bin? I can't seem to figure it out and it's frustrating me, I could just open my files in my computer on my PC and drag what I wanted in. How do you do this on a Mac or do I have to open each one separately? thanks!! I'm a digi scrapper and it's driving me nuts!!

You can drag one photo into the workspace (not the project bin) if there's not another photo open, but for some reason in PSE 9 it stops working with additional photos. This is a PSE 9 bug, though, not the usual behavior of previous mac versions.

CS4 - how do you drag adj. layers to other images?

I used to drag adjustment layers between opened image files in CS1. Recently I upgraded to CS4.
Using CS4, even if you open several images at one time, only one of those images is visible on screen at a time.
With only one image visible, how do you drag adjustment layers to other images that are "opened" but not visible on screen?

The application frame isn't the ultimate cause of or solution to this problem. It's the tabbed documents that make the difference, because if you have the tabbed document preference turned on, they'll open as tabs even if the application frame is turned off.
There are a couple of more direct solutions.
If you like tabbed documents, you can still drag one layer to another but you have to use the Move tool. Select the adjustment layer, grab the Move tool, and drag from the document to the tab of the destination window. The destination tab will light up, letting you know you can now drop the layer in the other document.
Or, if you don't like the tabbed documents and want to see them all, split the documents apart. You can drag the tabs out of each other so that the windows float. Or, if you have the application frame on, it's a lot faster to just click the Arrange Documents button in the Application Bar and choose one of the n-up display options to get a nice tiled display. The tiled display is a lot easier to manage than several floating documents.
In any case, you can do all this while leaving the Application Frame on.

HT1203 How do you put music from one itunes account to another? Can you drag the music?

How do you put music from one itunes account to another? Can you drag the music?

You can use Home sharing

How to open a several links in separate tabs in Safari you drag to more tabs button"

how can I open a several links in separate tabs in Firefox, In Safari you drag all the links to the "+" button and they all open in separate tabs.
This is different then the plug-in "Multilink and snaplink" since the links I need to open are not selectable they are just written on a document.
For instance, it would look like this:
http://www.hi1.com
http://www.hi2.com
http://www.hi3.com
etc.....
Thanks!!!

Hello CommeLeMois,
You should be able to open links in new tabs by holding the Command key (⌘) and clicking on the link. Check in Safari Preferences and looked and the Tab section to see if you have the right behavior enabled.
Safari 7 (Mavericks): Tabs pane of Safari preferences
http://support.apple.com/kb/PH17163
Regards,
-Norm G.

How Do You Drag A Document You Have On A Mac Onto An External HardDrive??

Ive just recently bought a Macbook Pro and was wondering how can you drag a document onto an external hard drive. Is it the same as Windows?? Because everytime I try that, it wont let me :s.
If anyone could help it would be awesome because I need to know how to do this so I can put my cousework I have done on my MacBookPro, onto my external hard drive.
Thanks
Carol-Anne

Your external drive is likely formatted NTFS.
Take the drive to the PC and remove all the data on it and right click on it and format it exFAT or FAT on the PC, then place the files back on.
(Formatting a drive will remove all data on it.)
Take it to the Mac and it can use it just fine.
No need to buy any software, it will have to be constantly updated and tends to cause problems and glitches.
Drives, partitions, formatting w/Mac's + PC's

Adobe Bridge CS6 shows Maya files as a piece of paper folded and wont open them and also when you drag them into Maya changes the settings?

Adobe Bridge CS6 shows Maya files as a piece of paper folded and wont open them and also when you drag them into Maya changes the settings?

Adobe Bridge CS6 shows Maya files as a piece of paper folded and wont open them and also when you drag them into Maya changes the settings?

How do you drag and drop using mac laptop?

how do you drag and drop using mac laptop?

As said above, you can click down, ons use the other finger to drag the object. I had turned on the setting to use three-finger drag, so you can drag objects with three fingers. To change gesture settings, go to the system preferences>trackpad. Here you can also see all of the gestures of Mac OS X.

How do you drag and drop/move multiple emails from the inbox or mail archive folder to a file folder in your finder?

I would like to archive hundreds of my emails that currently exist in my apple mail email filing system by moving them into file folders in the finder. I can do this easily with a single email but it wont let me do it with multiple emails or a complete folder. Is there any way of do this easily?

Thanks very much for this. However, I understand how dragging and dropping files normally works. It just seems the it wont work when you do it with emails when you are transfering them into a normal finder system folder. If you highlight one file and drag it to a finder folder it works, but when you drag multiple, it just wont let you do it.
Is there any work around for this? Thank you once again for your time.

Score Editor bug: syncopating a note disturbs line layout

In the example below, the instrumental part with max 2 bars per line has been created with the Layout Tool, and then the selection saved as a Score Set ( which i hope locks all the page details in place).
[img] http://i364.photobucket.com/albums/oo82/dogliege/Picture3.png [/img]
I then noticed that the red circled note is not displayed correctly - it should be a dotted eighth note and duly click on it with my Syncopate note command.
This then produces the following effect: it crunches up the bars and disturbs the line layout which was already set, cramming 3 bars onto the line above as in the example below.
[img]http://i364.photobucket.com/albums/oo82/dogliege/Picture4.png[/img]
Any solutions appreciated/workflow suggestions.. or is this just "..another L8 Score Editor bug.. wasting more of 2009"
PS Any suggestions as how to get the images to display in the post - as opposed to appear a link? cheers
Message was edited by: musicspirit

i should be enjoying my holiday but i couldn't help myself...
there are a couple of fixes for this.
first, try cutting the regions somewhere to force a redraw.
second, if no form of cutting or reformatting works, try copy and pasting the midi into a fresh autoload on the intel.
particularly if the file was created pre 7.2. there can be compatibility issues between ppc and intel.

HT1386 Where do you drag and drop playlists onto iphone in new itunes

Where do you drag and drop playlists onto iphone in new itunes

I don't blame this person whatsoever for making the assumption that the iPod portion of his phone would work similarily, if not the same, as the iPod.
But it does work the same as the iPod. As with an iPod, you can sync all songs and playlists, or selected playlists, or you can manually manage music and videos. You can also select sync only checked songs and videos under the Summary tab and uncheck the songs in your iTunes library that you don't want transferred to your iPhone. This can be used with syncing selected playlists - if you want to remove a song from your iPhone that is in a selected playlist without removing the song from the playlist in iTunes, you uncheck the song in the playlist in iTunes followed by a sync. There is no difference with an iPod in this regard except for the iPhone not supporting disk mode.
In order to manually manage music and videos with an iPod, you must select this under the Summary tab for the iPod sync preferences, and the same for the iPhone.
And if you resent his rant, why respond and waste your volunteer time on this post?
I can waste my time anyway I see fit. If you don't like it, don't respond.
And not everyone can afford to replace this type of investment on a whim.
Copied from the OP's post.
Don't tell me it's clicking on the boxes next to the songs in the Library page, *because that's when I will start asking for my money back...*
Or the iPhone can be sold to someone else with the proceeds used to purchase a different phone. I haven't read any reports about someone having trouble selling their iPhone used at a good price even if damaged.

Editor bug if you drag a case structure over an index/replace elements node on a in place structure

Similar Messages

Maybe you are looking for