EDM Profile upload and Timezone

Hi friends
When importing profile values using std BAPI, I am facing a problem, my time zone is EST ( UTC-5) but the data from interval (CMEP format) meter is in UTC thus a value of 05:00:00 in the file is actually 00:00:00 in the system. Now it is becoming difficult to match the data against the local time ( EST) both in Table and in display during profile value upload
I have tried changing the time zone in the system and in user profile. can you please help
Thanks
joy

Hi Roy,
Use FM ISU_DATE_TIME_CONVERT_TIMEZONE. On table TTZZ, you have the all existing Time Zones.
Here a Test for you case with FM test interface.
Import Parameters               Value
X_DATE_UTC                      02.10.2008
X_TIME_UTC                      05:00:00
X_TIMEZONE                      UTC-5
Export Parameters               Value
Y_DATE_LCL                      02.10.2008
Y_TIME_LCL                      00:00:00
Hope that this is exactly what you mean.
KR,
AAL!

Similar Messages

EDM profile uploading

Hi,
I Ihave developed a report to upload edm profile at an interval of 15 minutes.I am fetching installatiion number ,date ,unit of consumption and the consumption values at 15 mins interval from a text file.My report is inserting values to the database table EPROFVAL15,but while iIam trying to see the profile values through the transaction EEDM02(by giving the installation number and selecting a profile) then m unable to see the values.Can anyone tell me the cause of the above problem .
I have used the function module ISU_DB_EPROFVAL15_UPDATE to insert values.Is this problem related to the time zone.actually in the database the profile values should get inserted for a profile 5.30 hours before(for example: on 30.06.2010 for profile no:50
consumption value for time 00:00:00 should get stored on 29.06.2010 at 00:18:30).
regards.
pratibha

need to ask some other question so winding up things replies are always welcome

My resume will not load on Apple's career site. I've tried PDF format and Docx. When I hit upload and go back to my profile, nothing is there. Any thoughts?

My resume will not load on Apple's career site. I've tried PDF format and Docx. When I hit upload and go back to my profile, nothing is there. Any thoughts?

Hi Mac Attack,
My computer will not disconnect from the internet. It seems to find a clone router and continues even when I shut down and unplug my my own home iy
Your main question was 'chopped' in the title. Please reply in the body of a reply box with the full question and anything you have tried. And no, the long report was not helpful .
If the same website is opening each time you launch a browser (Safari?) hold down the shift key as you launch to prevent previous pages from opening.
Have a look at your settings in Safari > Preferences. Especially General and Privacy.
Reset Safari to remove cookies and other stored data.
System Preferences > General
Have a look at your settings in System Preferences > Security & Privacy.
Call back with more questions.
Regards,
Ian

Edit User Profile How do I enalble user lo loggin to their own profile page and edit it?

Hi
I am having some problems....... any help would be nice
I am using DWCS3 and ADDT toolbox extension wamp and phpmyadmin
I am trying to create a site for people to be able to post a profile with a picture and info and display it in a dynamic table.
I can create the form, a database and display the data on another page in a dynamic table all ok..... kind of.
I can create a user registration system with ADDT.
I can redirect them after registration to a post profile page, which has a form to upload details. I can then display those details on a user info page.
I would like to allow logged in users to be able to click on a link to their own profile page , which would show the same form that was filled out in the post profile page, but would be already populated with their previously entered information. I would like users to be able to edit the content of the form and update the information in the database and automatically delete delete any previously entered information ( only in the fields that have been edited)
How do I go about doing this?.... step by step?
I want to allow logged in user to view their own profile not every bodies.... how do I do that?
I have read on another post that to do something similar to this I should filter my database information using a session varialble MM_username that I think is created automatically after user logs in .... but I don;t know how to do this.... I really don;t understand is this the way I link my user to a page that only displays their info ? or is there another way?
I would also like to allow only people who have posted a profile to be able to edit profile ...... do I do that by
1. new user registers and is redirected to login page
2. user logs in and is redirected to an index page that has a post profile button and a edit profile button but only the POST button is active ( and links to a form to post info ) and the edit profile button is linked to a " You must post a profile first" page ( with a link back)
3 so user posts profile and is directed to an index page which has an edit profile button which is now linked to an edit profile page
Does that sound correct?
Any suggestions in getting all this to work would be much appreciated

Hi Yomi,
I have created the users page which submits to a members page and tell the user to edit biodata, profession, and hobbies. but on clicking I am really confused on how the id will be transfered from the members page to update biodata and the user updates the form which will show past records. this should also apply to the profession and hobbies
If I understand this right, you might want to consider providing a complete "userdata" section which comes with a Dynamic List and a Dynamic Form to have users add & update their data plus (via the Dynamic List) track all past records
Lastly is it possible I create recordset at will and the id will be passed thru since kt-login-id behaves sololy
I really can´t recommend this "pass user_id as URL variable" approach in this case, as URL variables are displayed in the browser´s address bar -- and this is absolutely insecure, because anyone could simply change the displayed "user_id" value, reload the form and hence edit data which belongs to a different user.
The only secure method is indeed to use ADDT´s session variable kt_login_id
Fatal error: Call to undefined function: var_export()
Not sure, but maybe some "includes" files haven´t been generated
Cheers,
Günter Schenk
Adobe Community Expert, Dreamweaver

De-allocating EDM Profile of an Interval Meter attached to an installation

My dear friends, I need sincere help from you .
This is an ISU requirement on which ABAP/functional suggestions are required.
I have an installation with an interval device installed to it.
We need to do full removal of this installed device by eg32.
The interval meter is having EDM Profile attached to it. Before doing full removal of the device from the installation using EG32,
we need to de-allocate the EDM Profile attached to this interval meter. Manually this is done by using transaction code - EEDM04
but we need to do deallocation of profile using ABAP code.
We need your help in this regard. Could you suggest ISU function modules that could be used to do the deallocation of the EDM profile from the interval Device/Meter.
Your help is really needed and appreciated!
Thanks,
Rohit

I think function module ISU_S_PROFASS_CHANGE might be useful.
Isnt't it an option to prorate the profile allocation on device removal?
You can set system parameter PRORATEPRO for this in customizing of device management:
PRORATEPRO (Limit Prof. Alloc. for Rem./Repl./Mod./Chnge to Logical
Reg.)
During device installation/replacement/removal or when changing the
logical register number, you can use this parameter to control
whether the allocations of the profile to the register are limited.
Edited by: evolderen on Apr 15, 2010 8:23 AM

Remove EDM Profile from Interval Meter of an installation-Device Management

My dear friends, I need sincere help from you .
I have an installation with an interval device installed to it.
We need to do full removal of this installed device by eg32.
The interval meter is having EDM Profile attached to it. Before doing full removal of the device from the installation using EG32,
we need to de-allocate the EDM Profile attached to this interval meter. Manually this is done by using transaction code - EEDM04
but we need to do deallocation of profile using ABAP code.
We need your help in this regard. Could you suggest ISU function modules that could be used to do the deallocation of the EDM profile from the interval Device/Meter.
Your help is really needed and appreciated!
Thanks,

I think function module ISU_S_PROFASS_CHANGE might be useful.
Isnt't it an option to prorate the profile allocation on device removal?
You can set system parameter PRORATEPRO for this in customizing of device management:
PRORATEPRO (Limit Prof. Alloc. for Rem./Repl./Mod./Chnge to Logical
Reg.)
During device installation/replacement/removal or when changing the
logical register number, you can use this parameter to control
whether the allocations of the profile to the register are limited.
Edited by: evolderen on Apr 15, 2010 8:23 AM

Profile editor and LumixG1

I am runing all my cameras throught the profile editor (1.0.0.39) beta2 as I cannot find a newer version. The three camera I am working with are the Canon 1DS2, Cannon Rebel XS and a lumix G1. The rebel and 1ds2 work fine but when I try to open the G1's dng file (converted from the G1 Raw) the PE tells me its not a valid DNG file. Am I missing someting ? At first I assuemed the camera was too new but the Rebel XS was recognized.........

Try the software that comes with the x-rite ColorChecker Passport and see if it works any better. It performs the same function as the DNG Profile Editor:
http://www.xritephoto.com/ph_product_overview.aspx?ID=1257&Action=Support&SoftwareID=917
You will need to "register" with x-rite and login.
Alternatively, you can upload your CC G1 RAW and I'll try it in the DNG Profile Editor and/or the x-rite software.

WRT400N Upload and Download Speeds

I have a WRT400N router. I have a network set up where I am physically connected to the router while my two room mates have a wireless connection. When I test my connection I have a download speed of 25 Mb/s and an upload of about 2 Mb/s. My room mates however have a download speed of .5 Mb/s and upload of about .5 Mb/s. They are getting full signal strength from my router, so I am not sure what the problem is. What is the problem and how do I fix this? They should be getting much faster upload and download speeds.

After a firmware upgrade, you must reset the router to factory defaults, then setup the router again from scratch. If you have not done this since the last firmware upgrade, then please do this now and see if it corrects your problem. If you saved a router configuration file, DO NOT use it --- you must setup the router from scratch.
If the above does not correct your problem, then the most likely cause is simply a poor wireless connection. This can occur even if your computer shows "5 bars" or "full signal strength".
There are many causes for poor wireless connections, and many solutions:
First of all, give your network a unique SSID. Do not use "linksys". If you are using "linksys" you may be trying to connect to your neighbor's router. Also set "SSID Broadcast" to "enabled". This will help your computer find and lock on to your router's signal.
If your problem is that you are getting poor speed between your wireless n router and wireless n adapter, in the router, make sure the "Radio Band" is set to "Wide".
Poor wireless connections are often caused by radio interference from other 2.4 GHz devices. This includes wireless phones, wireless baby monitors, microwave ovens, wireless mice and keyboards, wireless speakers, and your neighbor's wireless network. In rare cases, Bluetooth devices can interfere. Even some 5+ GHz phones also use the 2.4 Ghz band. Unplug these devices, and see if that corrects your problem.
In your router, try a different channel. There are 11 channels in the 2.4 GHz band. Usually channel 1, 6, or 11 works best. Check out your neighbors, and see what channel they are using. Because the channels overlap one another, try to stay at least +5 or -5 channels from your strongest neighbors. For example, if you have a strong neighbor on channel 9, try any channel 1 through 4. For wireless n, make sure your standard and wide bands are at least 2 channels apart. For example try standard band on channel 11, and wide band channel 9.
Also, try to locate the router about 4 to 6 feet above the floor, in an open area. Do not locate it behind your monitor or near other computer equipment or speakers. The antenna, if external, should be vertical.
Also, in the computer, go to your wireless software, and go to "Preferred Networks" (sometimes called "Profiles" ). There are probably a few networks listed. Delete any network named "linksys". Also delete any network that you do not recognize, or that you no longer use. If your current network is not listed, enter its info (SSID, encryption (if any), and key (if any) ). Then select your current network and make it your default network, and set it to automatic login. You may need to go to "settings" to do this, or you may need to right click on your network and select "Properties" or "settings".
If the above does not fix your problem, download and install the latest driver for your computer's wireless adapter.
Some users have reported improved wireless performance by switching to WPA encryption.
If you continue to have problems, try the following:
For wireless n routers, try setting the "n Transmission Rate" to 162 Mbps, and the (wireless g) "Transmission Rate" to 54 Mbps.
If you still have trouble, download and install the latest firmware for your router. After a firmware upgrade, you must reset the router to factory defaults, then setup the router again from scratch. If you saved a router configuration file, DO NOT use it.
Hope this helps.

Table for EDM Profile with Installation or Device numbers

Hi
Can anybody answer Table for EDM Profile with Installation or Device numbers?
Thanks in advance.
DGR

Hello,
You allocate the profile to a register so you want to have your logical register number.
If you have the equipment number you could go to table ETDZ or call FM ISU_DB_ETDZ_SELECT and fetch the registers.
If you want to see the table of profile allocations you can check table EPROFASS.
If you use IS-U-EDM the tables which contains informations about profile values are EPROFVAL*...
Hopefully some of this infomation is useful for you.
Regards
Olivia

Hi Guys, I am using the full width video widget on a site. The widget was working perfectly however I have just added additional content to the site and re-uploaded and now the video is not working! Please help I have tried everything and am freaking out

Hi Guys,
I am using the full width video widget on a site. The widget was working perfectly however I have just added additional content to the site and re-uploaded and now the video is not working! Please help I have tried everything and am freaking out as this web-site has been payed for by my client.
Alex

Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

After updating to Firefox 7.0.1, menu bar for Google,yahoo, Facebook (message,notification,profile,home) and others site are disabled. How can solve this problem?

after updating to Firefox 7.0.1, menu bar for Google(web ,image,video,map etc),yahoo, Facebook (message,notification,profile,home) and others site are disabled. even I cant log out from different sites cz the log out bar is completely disabled. I tried with Firefox 4;5 and 6, same problem exist . I tried by active all add ons for facebook, same problem exist. If I use internet explorer , I don't find such problem with it.
How can I solve this problem?

Thanks a lot for your swift response. And sorry if it was a bit too hectic to go through my detailed query (which I did because it was misunderstood when I asked previously). As I've mentioned above, I was informed that updating to 5.0.1 would '''require''' me to '''delete''' the current version and then install the new one. And doing so will involve losing all my bookmarks. I guess I should have been more specific and detailed there. By losing, I didn't mean losing them forever. I'm aware that they're secured in some place and deleting and installing the software doesn't harm its existence. What I meant that if I install the new version, I'd have to delete the old one. And after installing the new version, I'd have to transfer them (bookmarks) back from wherever they are. Get it? When it updated from 3.6.9 to 3.6.13, and from 3.6.13 to 3.6.18, I didn't need to follow that process. They were already present on their own.
BTW, I'm having no problems with 3.6.18 but after learning about the existence of version 5.0.1, I'm a bit too eager to lay my hands over it.
Thanks for your help; hope this wasn't extremely long.

How do I alter the html in the simple form contact us so it will upload and function on Bluhost?

All representatives are actively assisting other customers. Your estimated wait time is 7 minute(s) and 0 second(s) or longer. Thank you for your patience.
All representatives are actively assisting other customers. Your estimated wait time is 6 minute(s) and 30 second(s) or longer. Thank you for your patience.
All representatives are actively assisting other customers. Your estimated wait time is 6 minute(s) and 30 second(s) or longer. Thank you for your patience.
All representatives are actively assisting other customers. Your estimated wait time is 7 minute(s) and 0 second(s) or longer. Thank you for your patience.
All representatives are actively assisting other customers. Your estimated wait time is 6 minute(s) and 30 second(s) or longer. Thank you for your patience.
All representatives are actively assisting other customers. Your estimated wait time is 6 minute(s) and 30 second(s) or longer. Thank you for your patience.
All representatives are actively assisting other customers. Your estimated wait time is 6 minute(s) and 0 second(s) or longer. Thank you for your patience.
You are now chatting with 'Parikshit'
Parikshit: Hello K.
Parikshit: I read your issue description.
Parikshit: The form doesn't upload there. Does the form work fine when you test it on your computer by previewing in browser from Muse?
k: hello I am examining my page in developer ( source) in safari and I can see lines of tesst that say the server encountered and error.
k: If I export to my desktop, I can see the form but it does not work. If I upload it does not appear at all, and that is in not what adobe says the form will do. Adobe says the form will APPEAR but not function. It does not appear OR function. I had tried the 3 versions of php.... now I need to see a working form to a usual, commercial host so that I can copy the relevant code.
k: lines of text
k: And no, it does not work when I preview in browser
k: When I preview to browser it does turn red for a while.... but it doesn't do anything.
Parikshit: Can you publish the site in BC one to check if it works, if it doesn't then there must be some issue with the form itself. It's code.
k: no. I do not have a subscription and my client does not want BC used at all. I have the new CC muse which is supposed to finally work without having to upload to BC.
k: I have several cloud subscriptions, when cloud ever starts to work....
Parikshit: You don't need to work in BC or have it as your host. This is just to test if it works.
Parikshit: Just a trial site.
k: but my client refuses to have anythig to do with BC, and I don't blame them. They had bad experiences inthe past and do not want to do anything that involves BC.
Parikshit: You won't have to pay for the site.
k: I don't want to involve BC because I promised my client I would not go there. They were very insistant. We were finally going to use Muse because you no longer are required to use BC. BC was the big sticking point. But if I can't do this without using BC, then I am right back to where I was year ago. No better.
k: I think I have a limited number of occasions when i can use BC, and I don't want to do it now for this simple contact form. What a cheat.
k: What other functions in Adobe Muse CC won't work unless they are euphemistically " tested" on BC? Save me the time and dissappointment tryig to use this software.
k: Adobe states that the form will appear when uploaded to a outside site, but not work. The form does not upload, and the form does not appear. I tried version 5.2,5.3, 5.4 and then put php back to version 5.3.
Parikshit: There is nothing wrong with it. Did you change the code of the form?
k: no. And there is plenty wrong with it, it does not appear. I did not change the code because I want to look at a sample that has been altered to make sure I alter it the correct way. Where can I find the page source of a page that has the simple contact form widget used and uploaded to a commercial hosting site, and the forem works.
k: form works
k: This was a bug that was described last year and the release of this version advertised it had been corrected. It is not corrected.
Parikshit: It is corrected and several users are able to use it fine.
k: Then send me a page from one of the ones that is working fine.
k: who are those several users? Give me names.
Parikshit: there is either something wrong on the host's end that this doesn't get uploaded. We've already had many users upload it to an external hosts. We don't keep user site URLs with us, and hence I won't be able to provide you with one. But the best method here would be to post this on our forums, and then all our forum members (including users who have successfully implemented this) will be able to see the post and reply to it.
k: I've seen them all complaining that this still doesn't work. Perhaps you should encourage some of the successful uploaders to post to the forum. Send me a link. I had numerous tech support people at the host check this and there was nothing wrong with their PHP or the upload path.
Sorry, our chat session has ended due to circumstances beyond our control. Please feel free to contact us again if you need further assistance.

Can you supply a link?

Profile picture and status bar don't appear in Game Center

I first signed up for Game Center when it was released in the days of iOS 4. I used my iPod Touch 2nd gen. There was no status bar or profile picture, but I didn't realize because I was new. I later changed to an iPhone 3GS when iOS 5 was released, and the iPhone was restored to the backup of my iPod Touch. After my iPhone was fully functioning, I retired my iPod Touch. I noticed then that I was missing the profile picture and status bar because my Game Center friends had them. In December 2011, I bought myself an iPad 2 Wi-Fi. Still, no profile picture or status bar. I am confused, because my iPhone and iPad are running the latest version of iOS, 5.1.1. I have done plenty of troubleshooting, with no answer. Please help me.

Yeah, my internet is on and working too. I have been looking in to this issue- I have emailed Apple to make them aware. It seems like it is affected most, if not ALL tbe Game Centers on 2nd Gen and from what else I've heard, 3rd gen devices too. Whether this is intentional I don't know- it seems odd that everyone has suddenly been disconnected from their games tab on Game Center older devices, so perhaps it is a ploy by Apple to ensure more people switch to a newer device? We'll see. For now, I would recommend you follow the posts I've put up previously too. See my profile for my contributions.
Thanks, and add me on Game Center if you like.

How do I upload and attach the file to Service Request

[This thread was migrated from the On Demand Developer Forum in the old Siebel Community]
drangineni
New Contributor
Hi,
I am trying to upload a file and add it to a Service object as an
attachement. I greatly appreciate if you could provide any code or
sample...
Thanks.
Daya
Product: CRM OnDemand
10-21-2006 10:58 AM
Re: How do I upload and attach the file to Service Request...
BigSlick
Valued Contributor
On Demand doesn't support adding attachments via web services. One
solution I've seen is depending on the scenario is to create a web link
field on an object that's based on a custom text field. Your web service
can populate that custom field and the web link can generate a dynamic
link to the file in On Demand's UI. However, this depends on where the
attachment is located and if the user needs some sort of firewall access.
Hope this helps
-BigSlick
10-23-2006 11:43 AM
==============================================================================
Click on the board or message subject at the top to return.

Yes this still holds ture.
Bardo

Uploading and downloading files from a web app (Urgent!!)

Hi everyone:
I'm developing an application in PL/SQL to upload and download files from an HTML webpage. I congured the document table and the parameters necessary in the DAD of my application.
when I upload the file using my webpage that file info is automatically uploaded to the doc table. This is as far as I have gotten.
I need to do the following:
- Place the uploaded file into a column in another table in my database as part of a text message (think of it as an email message), and delete the file from the doc table (as this is thought to be a temp table that holds the file when uploaded from my webpage)
- Retreive the file so that it can be downloaded from another web page.
The file can be a PDF, WORD DOC, etc...
I now that I can do this with InterMedia but I haven't figured out how :(
Can anyone please point me to an example or some documentation that can guide me through the process.
DB VERSION: 8.1.7
IAS VERSION: 1.0.2.2
Thanks,
Carlos Abarca

The idea was for you to look at the code and get an idea of how to access the BLOB in the document table. IF you look at the procedure
insert_new_photo( new_description IN VARCHAR2,
new_location IN VARCHAR,
new_photo IN VARCHAR2 )
It shows how to access the blob that is stored in the document table. You can then copy this blob to your own table using the DBMS_LOB package.
Hope this helps,
Larry

EDM Profile upload and Timezone

Similar Messages

Maybe you are looking for