Eem on cisco 877, trouble with mail server action and smtp auth

hello all,
i'm using a router 877 at home and i really need to check out what this router do during the day.
So some time ago i configured it using some eem actions and sending to me email, without any problems.
Yesterday I changed my internet provider and now i need to use smtp autheticantion to send emails.
I read about how to authenticate, like username:password@host and also made a fast search here, without solve my problem.
I need to put as username the email of the provider like: [email protected]:[email protected]
So, i want to know if someone had the same problem and solved it. Of course i couldn't use @ two times or eem would think that host.com is my smtp server! And right now is going in this way!
My IOS version is 15.1(2)T2, eem version is 3.1.
Hope someone could help me!
Thank you in advance.
Sandro

Hello,
Thank you very much in advance for any help you can offer. Debugging I get this but stunnel.conf is edited and started
%HA_EM-3-FMPD_SMTP: Error occured when sending mail to SMTP server: smtp.gmail.com : error in reply from SMTP server
Router Cisco 877 with IOS version is 12.4(15)T16
Router Config:
ip host gmail.com pc_host*
track 1 rtr 1 reachability
delay down 10 up 60
ip route 0.0.0.0 0.0.0.0 Dialer0 track 1
ip sla 1
icmp-echo 8.8.8.8 source-interface Dialer0
timeout 2000
frequency 4
ip sla schedule 1 life forever start-time now
event manager environment to@gmail
event manager environment [email protected]
event manager environment smtp.gmail.com*
event manager applet TRACK-1-OK
event track 1 state up
action 1.0 mail server "smtp.gmail.com" to "[email protected]" from "[email protected]" subject "E2E up/down" body "DSL is UP"*
* I use several possible key combinations:
ip host smtp.gmail.com pc_host
event manager environment [email protected]:[email protected]
action 1.0 mail server "[email protected]:[email protected]" to "[email protected]" from "[email protected]" subject "E2E up/down" body "DSL is UP"*
stunnel.conf config:
cert = stunnel.pem
socket = l:TCP_NODELAY=1
socket = r:TCP_NODELAY=1
client = yes
options = NO_SSLv2
[pop3s]
accept = 110
connect = pop.gmail.com:995
[imaps]
accept = 143
connect = pop.gmail.com:993
[ssmtp]
accept = 25
connect = smtp.gmail.com:465
Greetings,
Guiller

Similar Messages

Please help with mail server choice and setup

Hello dear arch users, for begining i`ll start with litle intro what i know, and what i dont understand, so it would be easyer to help solve my problem, thanks for reading this.
I've been using arch for some time (few months) but i still dont know very much about it..
I have successfully installed lighttpd+php (fcgi)+mysql+phpmyadmin, ssh and mc allso of cource, serveral times, so i know how to solve little problems
I need everything lightweight because my arch's box is not so fresh as i could want
p2 350mhz CPU
192mb of RAM
8Gb HDD
10Mbit internet connection
whole project is for personal use only, and it will not even reach 10 user limit (me and some friends are using this..)
Now i`m willing to install mail server with some webmail ( i dont like outlook express thunderbird and other clients, only web acces)
I have googled for tutorials for 2 days now, just looking for best thing for newbie like me, with little knowlage of linux.
SquirrelMail or RoundCube wich one is bether ? I like RoundCube because it has nicer web design, but is it bether that SquirrelMail ?
Postfix and Dovecot are they enough good, or is there anything bether ?
Spamassasin and Graylistening will this work, or i`ll need something stronger?
Did i miss anything ?
I just want to say thanks for reading this, and helping me out. Thanks!
ps will this be good enough tutorial to follow ? http://www.hypexr.org/linux_mail_server.php
Karlis.
Last edited by karlis (2010-01-10 13:49:14)

Hi, thanks for response
SSL certificate is generated ... ok so it wont be so hard to help here are my configs
main.cf
# Paths
queue_directory = /var/spool/postfix
command_directory = /usr/sbin
daemon_directory = /usr/lib/postfix
mail_owner = postfix
# Domain settings
myhostname = <mydomain>
myorigin = <mydomain>
mydestination = $myhostname, localhost.$mydomain, localhost
# SMTP settings
smtpd_tls_cert_file=/etc/ssl/certs/mail.crt
smtpd_tls_key_file=/etc/ssl/private/mail.key
smtpd_use_tls=yes
smtpd_tls_session_cache_database = btree:/var/lib/postfix/smtpd_scache
smtp_tls_session_cache_database = btree:/var/lib/postfix/smtp_scache
smtpd_tls_loglevel = 1
smtpd_sasl_auth_enable = yes
smtp_sasl_auth_enable = yes
smtpd_recipient_restrictions = permit_sasl_authenticated,
permit_mynetworks,
reject_unauth_destination,
check_policy_service inet:127.0.0.1:10030
smtpd_sender_restrictions = permit_sasl_authenticated, permit_mynetworks
smtpd_sasl_security_options = noanonymous
# SASL
smtpd_sasl_type = dovecot
smtpd_sasl_path = /var/run/dovecot/auth-client
# Email and mailbox settings
alias_maps = hash:/etc/postfix/aliases
alias_database = $alias_maps
home_mailbox = Maildir/
virtual_alias_domains = <mydomain>
virtual_alias_maps = hash:/etc/postfix/virtual
mailbox_size_limit = 0
dovecot.conf
protocols = imap imaps
disable_plaintext_auth = yes
log_timestamp = "%b %d %H:%M:%S "
ssl = yes
ssl_cert_file = /etc/ssl/certs/mail.crt
ssl_key_file = /etc/ssl/private/mail.key
mail_access_groups = mail
mechanisms = plain login
socket listen {
client {
path = /var/run/dovecot/auth-client
mode = 0660
user = postfix
group = postfix
here are some of my config uncommented part, if its nececery i can zip and upload bouth configs to be 100% clear wheres the problem..
Karlis
Last edited by karlis (2010-01-13 18:02:23)

Why am I getting an error "Unable to establish a secure connection with (mail server)"? And what can I do?

I'm trying to set up email on my Firefox OS Flame (OS is Boot2Gecko 2.0.0.0-prerelease) and getting an error:
Unable to establish a secure connection with mail.velociraptor.info
I'm on Dreamhost, the certificate belongs to `*.dreamhost.com` but I'm not even sure this is a certificate error, and if it is, how I'd go about fixing it. I found the Certificate Manger, but I don't know how to download the certificate and add it, and I don't know if this is even the problem.

If this is a self-signed certificate or one where the CA is not trusted on FFOS, you will get this error.
There is currently no proper user interface for adding certificates. You could have a look at the method described at this page: http://www.pending.io/add-cacert-root-certificate-to-firefox-os/
There are also several bugs open regarding this problem, e.g. https://bugzilla.mozilla.org/show_bug.cgi?id=874346. They have additional information that could help you to find out, if this is the problem you are seeing.

I'm having troubles with Mail. Some mails (in particular to gmail addresses) are not sent.

I'm having troubles with Mail. Some mails (in particular to gmail addresses) are not sent. When sending an email, Mail apparently works for a while but does'nt sent anything. I repeated sending the mail with the same result and 2 or more mails in the draft folder. Yesterday I discovered that the mail had been sent 4 times!. Now I have the same problem: the mail has not been sent, it appears in the draft folder, I try to delete it but the mail remains in the draft folder. This happens after updating to Mac OS X 10.7.2 and migrating to iCloud.
I have MacBook 2 Ghz Intel Core 2 Duo, 4 Mb ram memory, Mac OS X Lion (10.7.2).

If those music are greyed out in iTunes on your laptop, are you able to play the music? If you cannot, it means that you probably deleted the mp3 file or moved it to another location where iTunes can no longer find. If they are greyed out on iTunes and cannot play them, I would just right click and delete it. Then re-sync with your iPad.

Can't create a new account at ePrintCenter - trouble with the server for 2 weeks.

Hi. I'm trying to create an account at ePrintCenter and all the time getting mesage 'Возникла проблема с сервером. Проблема будет устранена в ближайшее время. Приносим извинения за неудобства.' (A trouble with the server, wait, bla bla bla). When will it be fixed?

For those who are experiencing ongoing issues with their web services, you can attempt to try the following steps that may help resolve your problems.
1.) Completely shut down your printer and restart it
2.) If you have prints that have not printed, log into ePrint Center (or create an account if you do not have one) and then look for your printer status. If printer status is green but you still have pending jobs, delete the pending jobs one at a time (Starting with the oldest first). There may be a print job stuck in the queue that further restricts other jobs from completing.
a. If option 1 or 2 above still doesn’t work, removing web services and re-adding web services will cause the printer to reattach to the cloud.
b. Please note that if you attempt option 3, you will get a new eprint email address (and lose your custom one with no ability to get it back) furthermore, you will need to re-add your printer back to your ePC account.
I am an HP employee

Having trouble with mail.app always cc'ing myself

Having trouble with mail.app always reply all is cc'ing myself. Solution was to add another address under the account so that it recoginzes aliases as well as the primary account that you are sending from. Then it will recognize all the addresses and aliases associated with the account.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, look under User Diagnostic Reports (not "Diagnostic and Usage Messages") for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents—again, the text, not a screenshot. I know the report is long. Please post all of it anyway.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

Having trouble with mail..Wheel spins and mail hangs up when mainly when sending

Having trouble with mail..Wheel spins and mail hangs up when mainly when sending

Have you many items in outbox? Seen this where a message has a large attachment and I stuck

Scrolling troubles with mail (Mavericks)

Hi,
I'm experiencing regular scrolling troubles with mail since i've upgrade to Mavericks (latest mail upgrade included).
This is happening either in the messages themselves or message list or mailboxes list.
All others functions are on only scrolling is freezed.
After few minutes scrolling is back.
Does anybody experienced such trouble?

Thanks ZOGY the PRAM reset solved the scrolling bug for me.
Simultaneously hold down keys "option + command + P + R" during restart until the reboot repeats the chime, then release.

Trouble with Content Server connection

I am having an issue with content server on Unix. I'm finished with content server install and need to connect my ABAP system to it via CSADMIN. But when I first enter CSAdmin, I give it my host and port. What is the unix http script name for the default install??? Only the Windows name - ContentServer.dll - is populated? What is the web address to get to the content server?
http://<host>:<port>/???????
Do I need to do something with OAC0 and SICF first, before going to CSADMIN. The guide does not mention anything?
Thanks for your replies!
Jeff

Hi. I dont know obout CS on UNIX, on windows CS uses port 1090 and HTTP script ContentServer/ContentServer.dll
The web page is
http://server:1090/ContentServer/ContentServer.dll?serverInfo.
It's on Windows....
Also read this Note 586895. -->
      New access paths and compatibility with Windows systems
              The "/ContentServer/ContentServer. dll" and "/Cache/CSProxyCache.dll" paths have since been established as fixed default values for the Content Server/Cache Servers for Windows.
              The module access in the Apache Web server is not restricted to actual paths for program files. Using <location> tags, you can determine any (sub)paths that are to be used to access a module. These tags are entered in the "httpd.conf" file within the relevant module configurations. You can also define the clients allowed to access this "location" within a <location> tag with an Allow/Deny clause.
              To be able to continue using the Windows paths proposed in the SAP system, these Windows paths are installed as compatibility tags.
              In addition to this, you can use the new, essentially shorter paths "/sapcs" and /sapcsc" to access the SAP Content Server and the SAP Cache Server.
              The "Modifications to httpd. conf" attachment to the installation manual contains a list of all of the access paths delivered.
Regards.. Award if helpful.
Edited by: Sergo Beradze on Mar 11, 2008 4:37 PM

Hi, I have private emails in IPAD2, i have chaged the incoming mail server name and saved the change.

Hi, I have private emails in IPAD2, i have chaged the incoming mail server name and saved the change.
but, when I back to read my old emails in inbox it's gone away, I have backed to setting and return the previous
incoming mail name, but also I did't get the old emails. where I can find the old emails in my IPAD2 ?

It is only the link to your emails which are 'stored' on your iPad. You will have to enter all proper email addresses to get the message associated with them, which, in practice, means multiple accounts. If all still does not work try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release].

TS4363 I have upgraded to Mountain Lion 10.8.2 with Mail 6.2 and the "Use Autodiscovery Service" checkbox can't be found. Any ideas?

I have upgraded to Mountain Lion 10.8.2 with Mail 6.2 and the "Use Autodiscovery Service" checkbox can't be found in Preferences. Any ideas?
Cannot connect to Hover mail server unless I login to my webmail and then the messages magically load in Mail and then it goes offline again.

Let it go... these DL's take forever, depending on the spped of your connection and the traffic on the servers.
If by morning it is still sitting there restart and the DL should pick up from where it left off.

Is it possible to let OS X Mail server POP and Sort

Hi there!
I'm a current Kerio Mail server user and the way it's set up is like this:
All our mail gets delivered and spam-filtered at our hostingprovider's server, all mail drops into 1 big mailbox.
Kerio pops this mailbox every so often and distributes the mail to the users that are managed in kerio.
Is this setup possible with OS X Server mail services? We are receiving loads of spam and our connection acts up sometimes so this setup provides great availability.
[edit]
i guess fetchmail comes into play ... it is installed but not configured
[/edit]
Message was edited by: Zimmen

A few missing pieces here...
1. Are you using Kerio on your machine, or that is what your hosting provider is running? (I will assume the former).
2. Does your hosting provider accept mail to AnyUser@yourdomain, or only to legitimat users at your site? If the former, it is no wonder you are getting hammered by spam. You will take anything. Your provider might be able to filter against an RBL list, but that probably only takes out about 70% of the spam on a good day.
Anti-spam filtering takes place on the SMTP side of the server. Once the mail is delivered to your SP, you've got the mail and have to deal with it on the client side. Ugly at best. Fetchmail will not help you here.
OS X mail does have a pretty good selection of anti-spam tools. Most notably, SpamAssassin and greylisting. But both (greylisting in particular) require your mail server be the only mail server for your domain for best results.
Mail does not require particularly high availability. If your mail server is missing for a while, the sending site will try again later. Mail is very resilient to temporary failures. You could set up your SP as a backup MX host if you want, but I would submit that would increase your spam load when your server is down or missing (mail relay from a secondary host, short circuits the greylisting feature).
I do not know Kerio myself, but for mail alone, the built in mail services in OS X (current version) are pretty good. But you are shooting yourself in the foot by having your SP collecting mail for you, especially if they will accept any user.

I am having trouble with the Jpeg icons and also now thumbnails not being visable in bith teh Apple finder and now also Adobe Bridge. Can anyone shed any light on this ?

I am having trouble with the Jpeg icons and also now thumbnails not being visable in bith teh Apple finder and now also Adobe Bridge. Can anyone shed any light on this ?

Argh - once again, I find my solution right after posting this. Left out one modification to the SWIG script, now it runs in 29 seconds vs C 16 seconds, I can live with that.

Trouble with iMovie '11 transitions and themes? I'm running Lion, Mac OS X and just noticed today that the transitions and themes don't seem to be working at all when I start new projects or try to add to old projects. What is the solve here?

Trouble with iMovie '11 transitions and themes? I'm running Lion, Mac OS X and just noticed today that the transitions and themes don't seem to be working at all when I start new projects or try to add to old projects. What is the solve here?
I've seen notes about clearing the cache but it seems that this is an older OS and I can't find the plist mentioned here because it's an older system. http://www.youtube.com/watch?v=2cL9RuDV3Qc
Thoughts? Anyone?

GUYS, I NEED HELP !
ANYONE?

Installing BAM with Biztalk Server 2013 and SQL server 2012

Hello All,
I have to work on BAM with BizTalk Server 2013 and SQL server 2012 , is BAM already comes with BizTalk server installation ?
Will I needs to explicitly install that ? from where I can get the installer for BAM ?
What else I will needs to work on BAM ?
Note : I want to handle Exceptions in BAM ....how to do that ?
Thanks,
Nitin.
Thanks and Regards, Nilesh Thakur.

Hi,
BAM is available with BizTalk, all you need is to select it and install .
Refer the
Installation Guide available on MSDN or follow the blog: http://sandroaspbiztalkblog.wordpress.com/2013/05/05/biztalk-2013-installation-and-configuration-important-considerations-before-set-up-the-server-part-1/
Maheshkumar S Tiwari|User
Page|Blog|BizTalk
Server : Scheduling Orchestration using Trigger Message

Eem on cisco 877, trouble with mail server action and smtp auth

Similar Messages

Maybe you are looking for