Effects won't work.

I've been using this program since around August for and it has worked fine up until now. Whenever I apply an effect, it renders, but then when I try to play it, the screen goes black. I've tried to apply the effect in a different project file, I've also tried to do it in another account on the computer. Neither worked. If anyone could give me any other suggestions as to how to fix this problem, that would be fantastic. Thanks.
-Brooke
Message was edited by: MusicNotes4444

Hi
Most common origin is either
• less than 5Gb free space on internal start-up hard disk - free up 25Gb or more
• error in iMovie pref file - trash this and iMovie is cured (it makes a new error free one)
else read
*Not knowing the origin to Your problem - General approach when in trouble is as follows.*
• Free space on internal (start-up) hard disk if it is less than 10Gb should rather have 25Gb
• Delete iMovie pref file - or rather start a new user/account - log into this and re-try
iMovie pref file resides.
Mac Hard Disk (start-up HD)/Users/"Your account"/Library/Preferences
and is named. *com.apple.iMovie.plist *
While iMovie is NOT RUNNING - move this file out to desk-top.
Now restart iMovie.
• Hard disk is untidy. Repair Permissions, Repair Hard disk (Apple Disc Util tool)
• Garageband-fix. Start it, Play a note and Close it. Re-try (Corrects an audio problem that hinders iMovie)
• Screen must be set to Million-colors
• Third party plug-ins that doesn't work OK (not relevant for iMovie’08 or 09)
iMovie updated ?
QuickTime updated ?
Mac OS version ?
• Program miss-match. iMovie 5.0.2, up to Mac OS X.4.11 AND QuickTime 7.4.1 - is OK
• Program miss-match. iMovie 6.0.3 or 6.0.4, Mac OS X.4.11 AND QuickTime 7.4.1 - is OK (might work under Leopard)
• Program miss-match. iMovie’08 v. 7.0.1, Mac OS X.4.11 AND QuickTime 7.4.1 - is OK (might work under Leopard)
From LKN 1935. (in this case = iMovie HD (5), I tried it all, but nothing worked.
Your answer (above) has been helpfull insofar as all the different trials led to the conclusion that
there was something wrong with my iMovie software. I therefore threw everything away and reinstalled
iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos)
to my Sony camcorders worked properly as it did before.
Lennart Thelander
I run "Cache Out X", clear out all caches and restarts the Mac.
Yours Bengt W

Similar Messages

Lighting effect won't work since downloading photoshop cc.

lighting effect won't work since downloading photoshop cc.....i use a 1 yr old alienware laptop so am sure the graphics card is plenty robust enough. any ideas?

Hi,
Can you post your info from here: Help> System Info...
regards,
steve

Effects won't work on Text in After Effects

I must be missing some crucial step because I can't get effects to work on my text. I downloaded After Effects CC. I write text, put a solid, ramped background, add an effect, add a keyframe for the effect and see nothing. I copy what tutorials tell me. Nothing. Should if be difficult to see these effects? I tried CC Light Rays and Light Sweep. Just any effect in general won't apply to a text. I can't see it in FULL rendering or in Half/Rough Draft (which is where I want to work).

See this section of After Effects Help:
"Limitations of the Ray-traced 3D renderer"

Ken burns effect won't work

hi everyone
i'm trying to export a slideshow into a quicktime movie maintaining the ken burns effect, but the quicktime movie file won't show the effect - even if in the slideshow settings the "automatic ken burns effect" is ticked on (when i watch the slideslow on the screen, before exporting it, the effect is there).
do you have any suggestions?
another question: can you recommend a picture size? the quicktime movie will be, together with a video created qith FCE, on a dvd.
thanks guys in advance

Did you try the other account approach that GLO suggested? That can tell you if it's a system wide issue or just one associated with your particular account.
What you should have is your Receipts folder, other that those two subfolders, are many .pkg files which represent software that has been installed on your Mac. Those packages tell the Software Update and other installers what version is already installed so it can decide if an update is required.
Have you tried using the Share->Send to iDVD menu option to get the slideshow into iDVD?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier versions) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. There are versions that are compatible with iPhoto 5, 6, 7 and 8 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
NOTE: The new rebuild option in iPhoto 09 (v. 8.0.2), Rebuild the iPhoto Library Database from automatic backup" makes this tip obsolete.

Ken Burns effect won't work with imovie 6.0.3

I'm hopeful to find a way to use the Ken Burns effect in my 6.0.3 HD imovie. Does anyone have a solution to this problem? I can't get it to work.

Did you empty iMovie's trash after creating your clips? Did you previously apply the Ken Burns effect to that particular clip and now want to change the settings?
If you already had the clip/photo imported using the Ken Burns effect, and then emptied the trash, you cannot redo the KB settings. It is a bug in iMovie. You will get the black frame when you try. The only thing you can do is reimport the photo.
Here is an explanation of the problem (Thanks to Matti Haveri) :http://www.sjoki.uta.fi/~shmhav/iMovieHD_6_bugs.html#stillupdate

Effects Won't Work on Bus/Sends

Hello all,
I've got a problem getting effects plug-ins to work on the buses in one of my songs.
Here's the deal:
I have 8 bus objects in the environment. Inside the arrange window, I have vocals on two Audio tracks. I've created two bus channels in the arrange window and to each added an FX plug-in, SilverVerb (Bus 3) on one and DJ EQ (Bus 2) on the other.
On each of the Audio tracks, I added a post fader send to each bus. Everything was working fine the first day when I saved the song and shut down Logic Pro.
The next day I started Logic and opened the song to continue where I left off and the effects buses would not work. No matter what level I set the sends on the audio tracks to, there are no FX added to the sound - it's just dry.
I do not have the Plug-ins bypassed (I checked more than once), the gain is all the way up in DJ EQ and the 'Wet' percentage is at 100% in SilverVerb. What could the problem be?
Thanks in advance for any help.

Okay, I figured out what the problem is and my being an idiot was a big part of it.
I realised that I had the output on the buses in the arrange window set to the bus itself. So, for example, the I/O on Bus 2 which contained the DJ EQ was actually set to Bus 2, instead of 3-4 (which is what I use for my main stereo and Front L/R outs). I don't remember changing that, but I must have.
Anyhow, thanks anyway for trying to help.

My slow motion effect won't work... HELP ME!!!

I really need some help here. The original version of Imovie that came with my OS X worked great when it came to adding the effect of slow motion with the little bar at the bottom. I just recently purchased the Ilife 05 package and was all excited to get editing... but now I can't get the slow motion effect to work at all. It does all the rendering of the clip but the effect does not appear in my time line!!! What is wrong??? Please help me!!!

Hey Karsten... I'm back again...
Yes you guessed correctly... but I never want to see another pc in my life. Now about my prob... I did as you said and still nada. I wish the upgraded version in the Ilife 05 package still had the slow motion control at the bottom of the main screen like in the prior version, but they have taken it off of the main screen and placed in the special effects folder as "fast/slow/reverse". and it is here that it slows the clip down in the preview and renders the clip with the red bar on the main time line. But the red bar on the bottom of the clip in the time line doesn't move and ofcourse the clip is not put in slow motion.
My brother is quite savy with Mac as well and he can't figure it out either. What do you think???

Slow down effect won't work...

I recently upgraded to iMovie HD and when I try to use the slow down effect it renders it but it stays the same clip. Any suggestions on what is causing this?

You're not alone.
Unfortunately that's the only thing I can say and do for you...
Numerous posts deals with this bug. We can state that it appears in those cases:
- Ilife'05
- MiniDV film importation
This effect was so funny and usefull in previous versions of ilife.

My after effects won't work !!

every time i try it gives me this alert..
Last log message was: <140735111189248> <AppDirs> <5> Required Dir =
/Applications/Adobe After Effects CS6/Adobe After Effects CS6.app/Contents/Required . Generating crash log, which may take a few minutes.
i tried to talk with the support chat here in adobe and they said they can't help me so i should ask here. help someone?????
the version i got is the creative suit 6 master collection ( mac )
thank youuu

What exact version of AE are you using? CS6, I get, but is it 11.0.4? If not, consider updating.
What OS are you using? Did you update that recently?
Try this: fixing permissions problem that impedes start of Adobe applications | After Effects region of interest

After effects won't work

I bought a membership for after effects and it still says i have the free version.

http://forums.adobe.com/community/download_install_setup/creative_cloud_faq
-has a link about installing and updating
-has a link to manage your membership which may help
or
http://helpx.adobe.com/x-productkb/policy-pricing/membership-subscription-troubleshooting- creative-cloud.html

Hi I'm thinking of buying Adobe After Effects CC for my MacBook Pro. But I am worried it won't work. Here are my specs 2.4 GHz Intel Core i5, 4 GB Ram, 1333 MHz DDR3,13-inch (1280 x 800) are my displays and I'm up to date with latest software.

Hi I'm thinking of buying Adobe After Effects CC for my MacBook Pro. But I am worried it won't work. Here are my specs 2.4 GHz Intel Core i5, 4 GB Ram, 1333 MHz DDR3,13-inch (1280 x 800) are my displays and I'm up to date with latest software. I need to know if this will work on this Mac and or if there is any other After Effects that will work.

The display would not. However, your model does not have a discrete GPU, and the integrated (Intel 3000) would not meet CS6's requirements (any CS6 software) alone.
However:
Standard VRAM:
384 MB
Maximum VRAM:
512 MB*
Details:
Apple reports that "memory available to Mac OS X may vary depending on graphics needs. Minimum graphics memory usage is 384 MB". *If upgraded to 8 GB of RAM (or more), 512 MB will be reserved for video function.
In other words, you would need to upgrade your RAM to 8 GB. The VRAM (video ram) of the processor can exceed its specifications if you upgrade your memory to 8 GB. In order to run the software, you would have to upgrade your RAM first:
Crucial Memory Upgrades for Macs - Apple Memory
Complete MacBook Pro "Core i5" 2.4 13" Late 2011 Specs

After Effects Cs6 Installation Won't Work!

Im am trying to install after effects cs6 but it keeps stopping a 2% and has all these things to make it work, i do everything it says (ive done it about 7 times) and it Still won't work! someone please help!
Error Summary:
Exit Code: 34 -------------------------------------- Summary -------------------------------------- - 1 fatal error(s), 0 error(s), 0 warning(s) FATAL: Payload '{0A1E2FE2-B2AD-42F4-9C74-641853FB093A} Photoshop Camera Raw 7 6.0.98.0' information not found in Media_db. -------------------------------------------------------------------------------------

Hi Yovanniflores,
Please follow the following steps :
1. Disable the startup services : http://helpx.adobe.com/x-productkb/global/disable-startup-items-services-windows.html
2. Use the Adobe Creative Suite Cleaner Tool from the below link and try uninstall all the CS6 application.
http://www.adobe.com/support/contact/cscleanertool.html
3. After using the cleaner tool, please rename the following folders located at the below location :
Go to C:\Program Files (x86)\Common Files\Adobe
if you use 32 bit system it would be C:\Program Files\Common Files\Adobe
Rename the following folders ;
Adobe PCD -> Adobe PCDold
backup -> backupold
caps -> capsold
Then run the setup file again.

Touchgraph link browser right click won't work; jre 1.4.2_03 linux

touchgraph link browser right click won't work; jre 1.4.2
Wanted to mention that the touchgraph link browser(java client) client starts correctly in Redhat 9, but i found one problem when trying to edit links. The problem being that I can't open the small popup menu when i right click in linux RedHat 9. left clicking while dragging on a selected link (in edit mode) lets you create a new link both in microsoft windows 95a and in Redhat 9. When i right click in win95a, a small menu appears that allows me to edit a link, but this menu doesn't appear after right clicking a link in edit mode in redhat 9 (which does work with TG link browser in win95).
I tried using a 2 button mouse with 3 button emulation. I also tried to use a 3 button logitech trackball which works with the old logitech c7 setting in Redhat. I also tried to operate the mouse with it's three buttons using the number keypad in linux, which works in other applications under linux. The same problem still happens in trying all of these methods.
I was told that unix and windows use different "select," "extend," and "menu" buttons(in relation to the mouse).
Maybe, microsoft windows is using a different method of interpreting the right mouse button than redhat linux 9. if so, maybe there is a way to do this in linux (really, i have no idea how this could be done, but am open to try).
If there is a solution, i would appreciate knowing how to go about doing it. .
note: I am using Sun's java 1.4.2_04 in windows 95a and I am using Sun's java 1.4.2_03 in Redhat 9. Both are the most current, i just downloaded them recently.
note: touchgraph link browser is an open source java client and applet under the GNU general Public License. I think that the source code was included with the binary. I am using touchgraph link browser v 1.20 . I downloaded from sourceforge.net
in google i found the following:
https://lists.xcf.berkeley.edu/lists/advanced-java/1999-September/000532.html
note: mara, you helped me before when i was practically installing redhat 9 and i had a problem with the installation and you mentioned that it was a faulty cd-rom drive. with your help, i am enjoying in learning about linux for the past 5 months since your answer helped me install redhat 9 successfully. Thank you very much since my very first question to you.
Answer Hello,
I downloaded the program and, if I think of the right situation, the right-click doesn't bring a menu for me. The thing I noticed is that when I drag a new link and (with left mouse button pressed) press right button it has an effect of 'canceling' the link. That's why I think that right mouse button works correctly. The problem is why the menu does not appear.
I can see two reasons, both causing problems not easy to solve: bug in the program or incompatibility between Windows and Linux java versions. The second one should not happen.. but it doesn't mean it's impossible. A bug in the program should be easier to find, but not by me (with not very big Java experience it'd take me several days).
What I'd do in your place is to mail the program developers (or report a bug). It won't make things worse, but can fix things.
Sorry that I can't help more
Mara
notethe second half is a post i made to all experts.com

http://www.realvnc.com/pipermail/vnc-list/2001-February/020570.html
this Url has a comment on this problem in linux. just wanted to post this. it might help.

After Effects won't start Media Encoder

I'm trying to render from After Effects through Adobe Media Encoder, but the link will not work. I tried using Ctrl+Alt+M, and I tried opening it from the drop down menu. AE simply won't work with AME.
It worked before I upgraded to CC 2014, and I can still render out of AME through Premiere CC 2014.

Larchuck on another thread suggested this and it helped me as well. He was using windows 8 and I, 7, but it worked
Get Properties on the AME .exe
Under Compatibily Tab I checked "Run this program in compatibily mode for:" and selected windows 8
Hit apply
AME opens.
I went back to the Compatibilty Tab and unchecked "Run this program in compatibily mode for:" and I also clicked the button above it (Run compatibility troubleshooter)...went through its process and AME is woking again.
Turning it off again didn't work for me though so I'm leaving it on

My sound effects aren't working, how do I get them to work again?

On my iPad my sounds effects aren't working and it's on loud. I've been into music but it won't let me change the volume. It's just dark grey and won't let me touch it. Also the volume control on the side when I put it onto loud the sound effect pops up in the grey box but doesn't let me change the volume there either... I've also been through the settings and cannot find anything or anywhere where it will let me change the volume manually or invade it had been turned off by accident. I can't listen to music or hear when it goes off!!!
PLEASE HELP!

Is it still paired to a bluetooth device?
Is it connected to an AirPlay device?
This is for iPhone but still applies to iPad:
http://support.apple.com/kb/TS5180

Effects won't work.

Similar Messages

Maybe you are looking for