Ehci_hcd and uhci_hcd work on LiveCD but no on installed system
Hello. In case you don't know, ehci_hcd and uhci_hcd are drivers for USB controllers (something like that).
With the LiveCD, all USB devices work perfectly. Using "grep .hci_hcd" on dmesg shows everything started fine.
After installing Arch Linux, the system seems to boot perfectly but all USB devices wouldn't work (including the keyboard).
Using the LiveCD to chroot into the broken install, /var/log/errors.log shows about 2 dozen errors coming from ehci_hcd and uhci_hcd.
Any reason why the USB controller drivers work perfectly on the LiveCD but fail miserably on the installed system?
Adding the modules to /etc/rc.conf didn't work.
Here's the errors.log file (not all of it. just for one boot):
Apr 10 17:13:37 Enterprise kernel: [ 0.400301] i8042: No controller found
Apr 10 17:13:37 Enterprise kernel: [ 0.826667] ehci_hcd 0000:00:1a.7: Found HC with no IRQ. Check BIOS/PCI 0000:00:1a.7 setup!
Apr 10 17:13:37 Enterprise kernel: [ 0.826713] ehci_hcd 0000:00:1a.7: init 0000:00:1a.7 fail, -19
Apr 10 17:13:37 Enterprise kernel: [ 0.826755] ehci_hcd 0000:00:1d.7: Found HC with no IRQ. Check BIOS/PCI 0000:00:1d.7 setup!
Apr 10 17:13:37 Enterprise kernel: [ 0.826793] ehci_hcd 0000:00:1d.7: init 0000:00:1d.7 fail, -19
Apr 10 17:13:37 Enterprise kernel: [ 0.827122] uhci_hcd 0000:00:1a.0: Found HC with no IRQ. Check BIOS/PCI 0000:00:1a.0 setup!
Apr 10 17:13:37 Enterprise kernel: [ 0.827163] uhci_hcd 0000:00:1a.0: init 0000:00:1a.0 fail, -19
Apr 10 17:13:37 Enterprise kernel: [ 0.827197] uhci_hcd 0000:00:1a.1: Found HC with no IRQ. Check BIOS/PCI 0000:00:1a.1 setup!
Apr 10 17:13:37 Enterprise kernel: [ 0.827235] uhci_hcd 0000:00:1a.1: init 0000:00:1a.1 fail, -19
Apr 10 17:13:37 Enterprise kernel: [ 0.827267] uhci_hcd 0000:00:1a.2: Found HC with no IRQ. Check BIOS/PCI 0000:00:1a.2 setup!
Apr 10 17:13:37 Enterprise kernel: [ 0.827306] uhci_hcd 0000:00:1a.2: init 0000:00:1a.2 fail, -19
Apr 10 17:13:37 Enterprise kernel: [ 0.827337] uhci_hcd 0000:00:1d.0: Found HC with no IRQ. Check BIOS/PCI 0000:00:1d.0 setup!
Apr 10 17:13:37 Enterprise kernel: [ 0.827376] uhci_hcd 0000:00:1d.0: init 0000:00:1d.0 fail, -19
Apr 10 17:13:37 Enterprise kernel: [ 0.827408] uhci_hcd 0000:00:1d.1: Found HC with no IRQ. Check BIOS/PCI 0000:00:1d.1 setup!
Apr 10 17:13:37 Enterprise kernel: [ 0.827446] uhci_hcd 0000:00:1d.1: init 0000:00:1d.1 fail, -19
Apr 10 17:13:37 Enterprise kernel: [ 0.827478] uhci_hcd 0000:00:1d.2: Found HC with no IRQ. Check BIOS/PCI 0000:00:1d.2 setup!
Apr 10 17:13:37 Enterprise kernel: [ 0.827517] uhci_hcd 0000:00:1d.2: init 0000:00:1d.2 fail, -19
Apr 10 17:13:37 Enterprise kernel: [ 0.827548] uhci_hcd 0000:00:1d.3: Found HC with no IRQ. Check BIOS/PCI 0000:00:1d.3 setup!
Apr 10 17:13:37 Enterprise kernel: [ 0.827587] uhci_hcd 0000:00:1d.3: init 0000:00:1d.3 fail, -19
Apr 10 17:13:37 Enterprise kernel: [ 4.073465] bcma: Failed to get SPROM: -71
Apr 10 17:13:37 Enterprise kernel: [ 4.223758] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled
Apr 10 17:13:37 Enterprise kernel: [ 4.223803] intel ips 0000:00:1f.6: request irq failed, aborting
Apr 10 17:13:37 Enterprise kernel: [ 4.226423] hda-intel: unable to grab IRQ 0, disabling device
Apr 10 17:13:37 Enterprise kernel: [ 5.064284] ieee80211 phy0: wl0: request_irq() failed
Apr 10 17:13:37 Enterprise kernel: [ 5.064325] brcmsmac: brcms_bcma_probe: brcms_attach failed!
Apr 10 17:13:37 Enterprise kernel: [ 5.064475] brcms_module_init: register returned 0
Apr 10 17:13:37 Enterprise /usr/sbin/crond[417]: (CRON) INFO (Syslog will be used instead of sendmail.): No such file or directory
I have already tried:
1. adding "noapic" to the kernel parameters in grub2.
2. blacklisting ehci_hcd
3. removing ehci_hcd from mkinitcpio.conf
Last edited by Splooshie123 (2012-04-10 10:58:04)
Similar Messages
-
hi, well i just got my mac book pro, and it worked perfectly yesterday but then when i opened it today to go on FaceTime, my picture/video was dark and red ! how do i get it back to normal? there is a green light next to the camera when im on photobooth/facetime,...
Just do a restart. It seems to clear it up.
-
hello, i not long ago purchased light room 5 and it downloaded and was working great! but the my computer crashed and i was unable to retrieve it and i am still having problems! i DO NOT WANT TO PAY AGAIN!IS THERE ANY WAY I CAN GET IT BACK!
You should be able to download Lightroom 5.4 again, without problems, for free
From Google, type in
Lightroom 5.4 download Windows
or
Lightroom 5.4 download Mac
and please don't type in all capitals thank you -
I have iWork on my new MacBookPro and it works fine. But I had the Beta iWorks in iCloud on my older desktop. How do I get the Beta iWorks off my iCloud because it is different (and better) when I use it on my MacBookPro? Shouldn't the iCloud be the same as the MacBookPro iWorks
billjudy wrote:
Shouldn't the iCloud be the same as the MacBookPro iWorks
No, they are different apps. The beta one in icloud is for use by PC's as well as Mac's via a web browser and lets users collaborate on documents. It can't removed. Just ignore it if you have no use for it. -
No sound. Mute is not checked, volume all the way up on iTunes and on status bar. What am I doing wrong or missing? I restarted last night and it worked before that but not since, any one have any ideas?
Thanks, RobFirst off did you go to System Preferences > Sound > Output > And is the correct output selected?
Any red light coming out of the headphone jack? If so, you'll need to re-set the little switch in there by inserting a 3.5mm jack carefully in & out 20 odd times. Or grab a toothpick (non-conductive) and a flashlight.
Tried anything else that produces a sound? On restart do you get the chime? Perhaps check into Audio Midi Setup to ensure your output is selected correctly using the cog at the bottom left. -
I have iPhone 4. After I upgraded to ios5 I have a problem with Wi-Fi connection with "WPA enterprize" protection. I can define the connection and everything works fine. But after I lose signal or shutoff the WiFi, I cannot re-connect, and need re-define the net. It is only in WPA enterprize.
Thanks,
EyalI tried this! Somebody suggested it in another thread. It did not work, sadly.
-
I have bought a new iPad 2 charger and it works absolutely fine but then I wanted to upload some pictures on the computer so I put the wire in the right places but it doesn't work so I tried my iPhone and it worked fine?
Plz answer as soon as possible
-
I installed sync on my home pcs and they sync bookmarks perfectly, but today I installed it on my pc at work and it won't sync - no error messages pop up and it won't sync using the company network or my cellular modem.
If you get an error that says can't backup, try moving the existing backup file to a safe location and thry again. again. You can find the location of the backup file here:
iPhone and iPod touch: About backups -
hi there, i bought my macbook 1 week ago and its working fine. BUT the fan is always running and it is very annoying? what should i do
Take it back to the store where you bought it for a hardware check and/or exchange/refund.
If they say "that's normal" then get your money back.
Nothing worst than a annoying fan you can't do anything about.
I has a eMac that did that, sounded like a vacuum cleaner running all the time, I'm so glad I trashed it and will never buy a machine I can hear running in a near silent library.
Some advice, the higher end models with a dedicated graphics do tend to operate cooler, it's the one's with only CPU graphics (Intel) regardless if a Mac or PC that tend to make a lot of noise.
Graphics should have never been put on the CPU, it just doubles the heat and doubles the fan noise. -
My iphone4 got wet and was working right after but I shut off and have in bowl of rice by dehumidifier. But now it only turns on when plugged in. If I take to an Apple store will they be able to tell me if it's salvageable ?
Apple will not attempt to salvage it. They will offer you a replacement iPhone 4 for $149.
-
hi pls help me my iphone is forest i update but after my iphone is devices open is not working i click but sim card installed , attempting to activate this one coming pls help me answer me
Sounds like your phone was hacked to use with your carrier. Updating it has relocked the phone to it's original carrier. You will not get the phone working again without a SIM from the original carrier.
-
yesterday I downloaded (and paid for) Mountain lion, but got no install screens and OS is still 10.7.
How do I install it?Look in the Application's folder for Install OS X Mountain Lion. Double click to start the installer.
-
I bought CS6 and got the Serial Number, but when I install, it said cannot verify this number, I need help!
Contact Adobe (You may need the chat option):
Contact Customer Care -
I recently upgraded to the latest version of FF and now when using a webmail client I am routinely logged out when I try to search e-mail. It works in IE, but I don't like or want to use IE.
== This happened ==
Every time Firefox opened
== TodayUnstable means it can vary in stability day by day as it can be crash prone to being stable. Features can be a work in progress for a while. The May 24 Nighty build was crash prone for a lot of testers for example.
-
Added a spry menu bar and site works in firefox but not in chrome or IE. Please help
Hello,
I'm a photographer by trade and have only picked up enough web design knowledge in order to build a website that isn't distracting to my photographs and is simple to update and mantain. Please breakdown any answers to my questions in very simple terms.
To start off here is a link to my site for reference. www.cechternach.com
1. My Biggest problem right now is that my site works in firefox but appears as a blank white page in chrome and in IE it only shows my background color.
I'm assuming that this has something to do with the spry menu bar I added. The galleries, banner, and footer were all part of a previous version of this website that didn't use the menu bar. I actually used png's exported from an illustrator as buttons. I've been wrestling with this menu bar for a few days now. I had an issue with the menubar forcing down the gallery below it. that was fixed by changing a position value from relative to absolute in the menubar css. Then I couldn't see the submenu over the galleries. I think I fixed that with a wmode change but I"m not sure if I did that right. I believe i needed to change that in the object and embed part of the code. One spot for certain browsers and the other spot for other browsers. I was a little confused on this because i also read that i needed to change the wmode in the javascript file in dreamweaver cs4 which is what i'm using. Whatever wmode I changed it seemed to work in firefox. The submenu background was showing up transparent but i fixed that in the menubar css.
2. I would like the submenu's to have a semi transparent blurred background effect. Is this possible with a spry menu bar?
3. How do I center my text in the submenu?
4. My menu bar buttons should be the same font as my name in my banner. It looks fine on my computer that has that font loaded but on other computers I was testing the site on the menubar buttons show up as a default font. How can i fix this?
5. Is there any way to get rid of the grey lines that show up around my slideshow pro galleries and menu bar buttons when they are clicked?
The last four questions aren't as important as the first one. I may be upsetting the flow of the forum as well. Please let me know if I'm not following procedure with any of my questions. Feel free to point out any other problems you see with my page. I'm trying to learn this as I go. Thanks in advance.Spry widgets, which includes the SpryMenuBar, in their original state do not pose any problem in any browser!
Widgets contain two parts
JavaScript which drives the widget
CSS which styles the widget to individual tastes
The most common reason for a widget to misbehave especially in IE is because the inexperienced web developer has upset the delicate balance of the CSS. I say delicate, because in the original, great care has been taken by the Spry team to ensure cross browser compatibility.
There are other reasons why a whole page can misbehave. In these cases, the culprit should be sought outside of the Spry framework.
When trouble shooting, I would first of all comment out all of the Spry Spry parts and test the page in IE. If it does work after that, then yes come back here and we will have a look at the SpryMenuBarHorizontal.css for you.
If it doesn't work after disabling Spry, then have a look at the coding and the CSS for your page and fix that.
I hope this helps.
Ben
Maybe you are looking for
-
Issues with the color category in Outlook 2013 mail
We use Microsoft Outlook at work where we have the same email account on a few computers. The color categories have been very useful, especially when more than one person is working with the same email account, to indicate who is supposed to do what
-
Hi While Configuring CIN i came across Excise Tax indicator in that fields are empty i have to make an entry in order to configure i like to know IMG Part where to make an entry for that Excise tax indicator for vendor Classifies the vendor for the p
-
Imessages being sent as SMS messages
A majority of my text messages are being sent as SMS messages and I get charged for these. I work in an office with Wi-Fi and so does the person I am Texting. I don't want to turn off the "Send as SMS" button in fear of not receiving undeliverable me
-
Upgraded Call Assistant not working
The other day when I went to check the call assistant it required an upgrade so I let it run. Now when ever I get a call it does not show it as incoming nor does it show anything in the log. Does anyone know why it is not working?
-
On my contact list I have multiple names for one person
On my contact list I have multiple names for one person.