EHP installer - could not connect to JSPM

This is EHP upgrade on PI.
Using EHP installer prepare went thru fine for Abap, while during the java in the configuration phase, it updated the JSPM to the latest.
JSPM works fine if we use it in standalone mode (like ./go).
But in the EHP installer during the DETERMINE_APPLICATION phase it tries to connect to JSPM tool with the port 6250 (We have tried different port numbers and also tried the ports which are listening) and errors out saying that "connection to could not be established. Could not connect to host xxxxxx on port 6250..connection refused.
Port 6250 is not assigned to anyother application.(checked with netstat -an)
Please suggest.

Hi,
I am also facing the same problem at downtime stage
Could not connect to host on 6240.
I have got an error at downtime stage as per OSS note: 1399846 i followed the steps at step 5 i got an error that
Connection to SAPJup could not be established, see following messages. Could not connect to host ttcsap05 on port 6240. java.net.ConnectException: Connection refused java.net.ConnectException: Connection refused
i checked the port under netstat the port is allocated to some other.
So, i have changed port no. as 5xx17 at files sapjup.xml, jspm_config.txt, sapjup.xml then also no use.
Please help me in this.
Thanks & regards,
Arun

Similar Messages

EHP4 installation - Could not connect to port 4240

Hi,
I am trying to complete my ECC6 EHP4-ready installation by installing
Enhancement package 4 with EHPI tool.
In the initial Extraction phase Import tools (TOOLIMPI) the
installation gets stuck for long time and doesnt progress. When I stop
it Imanually I see this:
Jul 8, 2009 5:03:11 PM [Error]: Unable to execute the SDT request ABAP
operation extract on hostname degtlun1141 instance 33
Then, I see this error in the sdt trace directoty under the
installation folder:
/EHPI/sdt/trc
Here is the error in the file server.trc:
Jul 8, 2009 4:07:46 PM [Error]:
com.sap.sdt.lup.ctrl.SDTRequestExecutor.invokeMethod
(SDTRequestExecutor.java:267) [Thread[ABAP-3,5,main]]: Unable to
execute the SDT request ABAP operation extract on hostname degtlun1141
instance 33
Jul 8, 2009 4:11:27 PM
[Error]:
com.sap.sdt.sapup.rapi.connector.R3upConnector [Thread[ABAP-3,5,main]]:
Could not connect to degtlun1141:4240. Could not connect to host
degtlun1141 on port 4240.
java.net.ConnectException: Connection refused
java.net.ConnectException: Connection refused
When I do a netstat for this port, I see that it is used at the time but by
the EHPI itself because when I stop it the port shows no activity again.
How to proceed i this case?
Thanks
Cyrus

We also are getting the same error.
Did a lsof -i :4240 at the OS and it doesnot return anything which implies that port is free.
Did you start the EHPI
- /EHPI/STARTUP "jce_policy_zip=90000125.ZIP" command in one session and then use
- http://<hostname:4239/ or start the GUI in another session?
We are also facing the same issue where EHPI is failing at the extraction phase with error
Unable to execute the SDT request ABAP operation extract on hostname
<hostname> instance 00
Extraction of the ABAP upgrade request ABAP has failed
Error from unit observer Tool connector failed.
Connection to SAPup could not be established, see following messages.
Could not connect to host <hostname> on port 4240.
java.net.ConnectException: Connection refused
java.net.ConnectException: Connection refused
Any help will be highly appreciated.
Thanks
Kalinga

Could not connect to JSPM

Hello all,
we are not able to connect to JSPM anymore and get following log entries:
com.sap.sdt.jspm.phases.PhaseTypeJSPM
com.sap.sdt.util.diag.JavaException
java.lang.ClassCastException: com.sap.sdt.ucp.phases.PhaseContext incompatible with com.sap.sdt.j2ee.J2eePhaseCo
ntext
JSPM_MAIN
JSPMPhases
Java Support Package Manager
JSPM.log:
java.lang.ClassCastException: com.sap.sdt.ucp.phases.PhaseContext incompatible with co
m.sap.sdt.j2ee.J2eePhaseContext
Any ideas ?
Is it possible to clean the SDM Repository or to synchronize with the database , because in database is NW7.0 and in SDM Repository shows NW 7.01 for the
components.
Kind regards
Andreas Laaser

Hello Andreas,
Firstly I would suggest you to check the file system free space (refer to the note 891895 - JSPM: required disk space) and the file/dir permissions under j2ee/JSPM* and EPS inbox dir.
Please also navigate to the location /JSPM/data/variables, and remove all DataModel.xml files. After that restart the JSPM application and try again. Please do not delete these file but take a safe backup at some other location.
If the workaround does not work, please try to deploy the lates JSPM with the SDM application:
1. Close JSPM application
2. Start SDM:\usr\sap\<sid>\<instance_namer>\SDM\program\RemoteGui.bat
3. From the menu invoke "SDM Gui" -> "Login" and enter your SDM password
4. Navigate to tab "Deployment" and select JSPM component using plus button and select option "Update deployed SDA/SCAs that have any version" into Deployment configuration options below and complete deployment confirming it.
5. Close "SDM Gui" application.
6. Please try to force J2EE bootstrap on the system by changing
/j2ee/cluster/bootstrap/bootstrap.properties parameter
element.resynch = FORCE
7. Try to start JSPM
After these steps I hope you will be able to solve this issue.
Best regards,
Lisandro Magnus

[Solved] Ath9k driver installation / Could not connect to wi-fi.

I can't connect to any wi-fi network with my laptop. I couldn't figure out how I should deal with the wi-fi configuration(the wiki didn't helped me much)
Here's the output of lspci -k
02:00.0 Network controller: Qualcomm Atheros AR9485 Wireless Network Adapter (rev 01)
Subsystem: Lite-On Communications Inc Device 6617
Kernel driver in use: ath9k
Kernel modules: ath9k
and the output of dmesg | grep ath9k does not show the messages that the driver actually loaded.
I couldn't figure it out how to install the drivers for my wireless card.
Any help please?
/LE:
I forgot to mention that I detect wireless networks so i think actually the driver is installed by default in my kernel but I only cannot connect to them.(can't figure out that dhcpcd tool...)
Last edited by dede24ever (2015-01-01 17:59:29)

ip l's output
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: enp1s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP mode DEFAULT group default qlen 1000
link/ether e8:9a:8f:eb:0b:8f brd ff:ff:ff:ff:ff:ff
3: wlp2s0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DORMANT group default qlen 1000
link/ether 74:de:2b:9d:25:b3 brd ff:ff:ff:ff:ff:ff
4: ppp0: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1492 qdisc fq_codel state UNKNOWN mode DEFAULT group default qlen 3
link/ppp
I tried to connect via wi-fi menu on a tablet hotspot(my only way of testing an wlan connection because I do not own a wireless router at the moment.
wifi-menu shows the network in my area, but when is to connect it outputs
Job for netctl@wlp2s0\x2dmuiee.service failed. See "systemctl status 'netctl@wlp2s0\x2dmuiee.service'" and "journalctl -xe" for details
and systemctl status 'netctl@wlp2s0\x2dmuiee.service's output is
systemctl status 'netctl@wlp2s0\x2dmuiee.service' [ 4:49PM] 2 ↵
● netctl@wlp2s0\x2dmuiee.service - Networking for netctl profile wlp2s0-muiee
Loaded: loaded (/usr/lib/systemd/system/[email protected]; static; vendor preset: disabled)
Active: failed (Result: exit-code) since Thu 2015-01-01 16:49:03 EET; 1min 27s ago
Docs: man:netctl.profile(5)
Process: 9876 ExecStart=/usr/lib/network/network start %I (code=exited, status=1/FAILURE)
Main PID: 9876 (code=exited, status=1/FAILURE)
Jan 01 16:49:03 archey network[9876]: Starting network profile 'wlp2s0-muiee'...
Jan 01 16:49:03 archey systemd[1]: netctl@wlp2s0\x2dmuiee.service: main process exited, code=exited, status=1/FAILURE
Jan 01 16:49:03 archey systemd[1]: Failed to start Networking for netctl profile wlp2s0-muiee.
Jan 01 16:49:03 archey systemd[1]: Unit netctl@wlp2s0\x2dmuiee.service entered failed state.
Jan 01 16:49:03 archey systemd[1]: netctl@wlp2s0\x2dmuiee.service failed.
Jan 01 16:49:03 archey network[9876]: The interface of network profile 'wlp2s0-muiee' is already up
//// I edited the post before I've seen your post.

After itunes installation an error message is shown, (itunes could not connect to the iphone, because it is locked with a passcode, you must enter your passcode on your iphone before it can be used with itunes)

after itunes installation an error message is shown, (itunes could not connect to the iphone, because it is locked with a passcode, you must enter your passcode on your iphone before it can be used with itunes)

Hi ..
Follow the instructions here > iOS: Forgotten passcode or device disabled after entering wrong passcode

SQL 2012 installation Error-The MOF compiler could not connect with the WMI server

Hi all,
I am getting below error while installing SQL 2012 Dev edition in Win 8.1 Pro.
I am facing lot of issues while installing SQL 2012 in Win 8.1 Pro.Any other steps we need to take to install SQL 2012 in Win 8.1.
Thanks in advance.

Installation:
Installation for SQL Server 2012
Hardware and Software Requirements for Installing SQL Server 2012
Installing the .NET Framework 3.5 on Windows 8 or 8.1
About "The MOF compiler could not connected with the WMI server" error message:
Please, verify the Windows Management Instrumentation has status "started" and is set with Startup Type "Automatic". (Alberto Morillo, SQLCoffee.com).
José Diz Belo Horizonte, MG - Brasil

The ITS could not connect to the Web Application Server or the R/3 System

Hi Gurus
we are in the process of insalling ITS 6.20 (ITS version is 620010318381 ( itsWindowsX64_31-200001681, R/3 4.7 200)
Actually we installed it for dev/qas server with connectin mode property as "Connect to SAP system Using Applicatin Server" these are working fine for webgui!
and the same thing i installed for Production as connection mode property as " Connect to SAP System Using message Server" (hostname/IP, port as 3600 (as instance number is 00) here in the production evnironment we have 2 app servers. The installation got successful but i am not getting the log on screen through the link: http://10.3.3.175:81/scripts/wgate/webgui!
the error message is :
Connect Error
The ITS could not connect to the Web Application Server or the R/3 System
any help please
Thanks in advance

Hello Balaji,
Check the global.srvc file for errors in the R/3 system information. The ITS uses the following to connect to your system:
~appserver
~routestring
~systemname
~systemnumber
~logingroup
~messageserver
Which parameters are used depend on how you are connecting (logon group, route string, etc.)
Edgar

ITS could not connect to the Web Application Server or the R/3 System

ITS 6.20 on a single host on a WinXP test machine, connecting to R3 4.6C.
The webgui <u>was</u> working, but a test application created in the WebStudio would not work.
Now it's the other way around, the test application works fine, but the webgui fails with a "The ITS could not connect to the Web Application Server or the R/3 System."
I have not managed to get ../scripts/wgate/admin/! to work either.
Is it possible to have both the webgui and WebStudio created applications, working on the same ITS installation?
If yes, any ideas how?
Many thanks
Tim

Hi Tim,
You have to check the connection data in the relevant service file e.g.
~systemname
~messageserver
~logingroup
~appserver
~systemnumber
~routestring
~connectstring
If the Agate doesn't run you would see an ITS 500 error in the browser.
Thanks and regards,
Dieter

Itunes could not connect to the ipad because an invalid response was received from the device

Hello
I just installed the maximus v extreme motherboard with a ocz vertex 4 ssd with windows 7 x64. Installation was fine and installing drivers went without a hitch. Re-installing the software i use went fine as well.
However, when i went to use iTunes( v10.7) to sync my ipad i got an error message saying:
"Itunes could not connect to the ipad because an invalid response was received from the device"
I then connected my ipod nano to see if it will cause the same error, but it worked fine. So i tried an iphone and the same error I got for my ipad came up.
I tried reinstalling the usb drivers, but the same error came up. I also updated BIOS to the latest version, but the error still came up. I also reinstalled itunes numerous times and still got the error. I reinstalled and updated all drivers as well. Again this did not fix the issue. I also tried to run itunes in vista compatability and xp compatability mode. Again this did not fix the issue.
I have also followed all the steps apple recommends to do on their website with regards to this issue, again it did not fix the issue.
It is a real pain as everything else works like a dream! Is there anything i can do to get itunes to work properly on my pc?
Thank you for your help!
System specs:
asus rampage v extreme motherboard
OCZ vertex 4 SSD
8 Gb DDR3 RAM (1600 mHz)
windows7 x64
Intel i7 3.5Ghz 1155
nvidia GTX295 (x2 running in Sli)

I fixed this problem. Believe the problem is iOS 7 incompatibility with older iTunes Versions on older MacOS systems or platforms.
My iPad 2 would no longer sync with my old PowerPC Mac mini running MacOS. My iPhone 3GS synced fine. IPad2 updated to iOS 7 which doesn't run on my iPhone 3GS. Error message for iPad sync problem was "invalid response received from iPad" out of iTunes. I then applied update iOS 7.1.2 to iPad and error message changed to indicate this version of iTunes not supported, use 11.1.
iPad 2 used to sync prior to iOS 7 installation.
Research on Apple web site shows iOS 7 on iPhones and iPads does not support older MacOS and iTunes versions.
Upgraded with new Mac mini and iTunes 11.1 and MacOS 10.9.2. (put this off as long as I could. )
all good now.

I just recently downloaded iTunes and whenever I try to access the store It says "iTunes could not connect to the iTunes Store. An unknown error occurred (0x80096004)

I just recently downloaded iTunes and whenever I try to access the store It says "iTunes could not connect to the iTunes Store. An unknown error occurred (0x80096004). I have windows xp and it's running on service pack 2. I have downloaded and redownloaded iTunes many times. I'm getting very frustrated! Please help!

I have the same error for Windows Vista. I read all the community posts and followed the suggested fixes including numerous uninstalls and installs, clearing cache, choosing various SSL TL options, turning off all spyware and nothing has worked. My internet works fine for all my other programs so not sure what is going on with Itunes. I will not buy anymore products through
Apple Itunes.

After 2.0 Update "iTunes could not connect iPod error (0xE8000001)?

I've downloaded the 2.0 update for my iTouch... after the installer had finished its work it alerted me that the iTouch was rebooting and would appear in iTunes. However, I got this error message instead:
"iTunes could not connect iPod unknown error occured (0xE8000001)". I'm not sure if I should disconnect the USB or not.. or what is going on. Any suggestions?
Thanks!

Sweet! The power of the collective on the web...
Jeff - try this, worked great -
unfortunately i lost all my info on my touch when doing this, but I can dedicate some time tonight to resetting my wallpaper, my mail settings, etc.
i think the 'DFU' in these instructions means device firmware upgrade...found this on another forum where people complaining of same problem...
1. Hold both the home and power buttons until the device turns off
2. EXACTLY one second after the iPod turns off, release the sleep/wake button, holding the home button still ( the apple logo SHOULD NOT BE ON ).
3. In about 20 seconds, you will see your iPod appear in iTunes, but the screen on your iPod will still be off. You are now in DFU mode.
4. RELEASE the home button as soon as your iPod appears iTunes. If you fail to do so, your iPod will simply go back into recovery mode.
yo Apple - please roll out some info on this 'known issue'; While $9.95 isn't a budget-breaker, if you have to figure out how to make that $9.95 work on your Apple device like it appears some of us are, it speaks to posting something in Support about it - thanks!

The MOF Compiler could not connect with the WMI server

I am trying to add node2 to SQL cluster (2008) However, I kept running into errors with the following error message:
"The MOF Compiler could not connect with the WMI Server. This is either because of a semantic error such as an incompatibility with the existing WMI repository or an actual error such as the failure of the WMI Server to start".
I checked on the WMI services, they are started and running.renamed the WMI repository. but nothing worked .
Any idea what settings I need to change in order to ensure a successful instalation and add node 2 to sql cluster.

Hi,
Did SQL Server failed during installation and you somehow brought services online. Or it failed and next time you executed it succeeded IMO this error pops up because of remnants of failed installation on Node 1. With cluster specially if Installation on
node 1 fails you should uninstall completely and remove all files related to SQL Server and then proceed.
Have a look at below connect,see workaround and information posted by MS
https://connect.microsoft.com/SQLServer/feedback/details/356258/the-mof-compiler-could-not-connect-with-the-wmi-server
If above still not helps please post complete setup log file
%Program files%\Microsoft sql server\100\Setup bootstrap\Log\ folder.
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles

Could not connect to any JRun/ColdFusion servers on host localhost

I am a new CF admin and I am trying to upgrade my Apache. I am following the instructions in http://help.adobe.com/en_US/ColdFusion/9.0/Admin/WSc3ff6d0ea77859461172e0811cbf364104-7fd9 .html but am getting an error. Could not connect to any JRun/ColdFusion servers on host localhost
I am running CF8 on Linux Suse and trying to upgrade apache to version 2.2.22. I am running apache on server-1 and ColdFuson on server-2.
I tried running the following on server1:
/data/jrun4/bin/wsconfig -server cf8-2 -ws Apache -bin /data/web3/apache-2.2.22-general-cf/bin/httpd -script /data/web3/apache-2.2.22-general-cf/bin/apachectl -dir /data/web3/apache-2.2.22-general-cf/conf -coldfusion -v
but got the error.
So then I tried installing apache on server-2 and running:
/data/cf8/bin/wsconfig -server cf8-2 -ws Apache -bin /data/web3/apache-2.2.22-general-cf/bin/httpd -script /data/web3/apache-2.2.22-general-cf/bin/apachectl -dir /data/web3/apache-2.2.22-general-cf/conf -coldfusion -v
I got the exact same error.
CF is definately up and running.
What am I doing wrong?

Hi Kiran,
Yes, Coldfusion is running and I have root access. You need
to be root just to get the installer to run and to execute the
Apache connector to produce the error I pasted into my message. My
firewall is disabled, as is SELinux. I'm not sure how to "Write
small program to check socket creation..."
I'm reading through some of the tortured things Steven Erat
had to do to get CF7 running on FC6 here:
http://www.talkingtree.com/blog/index.cfm/2006/12/6/Running-ColdFusion-MX-7-on-Fedora-Core -6-Linux
I suspect I'm running into one of these snags. I was just
wondering if anyone knew if RHEL5 was officially supported yet, or
more concisely, Apache 2.2?

ITunes could not connect - timed out

For the past year I've had no problems using iTunes and my Ipod. But for the past month I can't connect properly to iTunes. I get a message saying: "iTunes could not connect to the iTunes store. The Network connection timed out. Make sure your network settings are correct etc etc". Not sure, but this may have occurred after I installed AVG bug software. Anyway, what am I supposed to do to "make sure my network settings are correct?" Any help appreciated. Thanks. Lloyd

Hmmm...no replies so far. OK, can anyone tell me how to uninstall iTunes from my PC and then re-install it, as I can't work out how to do this. Will I lose any cash credit I currently have on my present iTunes installation? And will I have to adopt a new ID if I re-install? Thanks in anticipation. Lloyd

MS SQL Server 2008 not getting installed properly - MOF compiler could not connect with the WMI server

I am trying to install SQL Server 2008 in my local machine. However, I kept running into errors with the following error message:
"The MOF Compiler could not connect with the WMI Server. This is either because of a semantic error such as an incompatibility with the existing WMI repository or an actual error such
as the failure of the WMI Server to start".
I also ran "rundll32 wbemupgd, UpgradeRepository" to rebuild WMI repository, it doesn't help either. I got the same error message.
Any ideas what settings I need to change in order to ensure a successful installation of SQL Server 2008?

"The MOF Compiler could not connect with the WMI Server. This is either because of a semantic error such as an incompatibility with the existing WMI repository or an actual error such
as the failure of the WMI Server to start".
I also ran "rundll32 wbemupgd, UpgradeRepository" to rebuild WMI repository, it doesn't help either. I got the same error message.
Any ideas what settings I need to change in order to ensure a successful installation of SQL Server 2008?
can you check below two links.Make sure previous failed installation is removed completely.
http://connect.microsoft.com/SQLServer/feedback/details/356258/the-mof-compiler-could-not-connect-with-the-wmi-server#
Solution given by Connect MS is:
Possibly the issue was caused by uninstalling from add-remove programs - at any rate, using aaron bertrand's suggestion below fixed the issue. Also of note - I used the local admin for the install.
http://sqlblog.com/blogs/aaron_bertrand/archive/2009/02/20/the-xp-sp3-msxml6-sp2-sql-server-debacle.aspx
yes - remove msxml6 and any other half installed portion of sql 2008 and REBOOT and install sql
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

EHP installer - could not connect to JSPM

Similar Messages

Maybe you are looking for