EHP4 - Task Statuses issue

Dear Experts,
We have a situation after the EHP4 upgrade,
we were able to configure Restatement & status reporting.
But when we imported the Transport requests in another environments,
We have issue with the task statuses.
Like all the statues of the tasks in consolidation monitor changed to Initial stage.
please help us understanding this. Is it expected or is it an issue.
Do we have any remedy. can we get back the earlier statuses.
We have a Go live on this upgrade. plz help us in this situation.
Thanks
Kamal
Edited by: kamal kishore on Nov 12, 2009 2:39 PM

Hi,
After the upgrade we checked the status monitor & we found all the historical status of tasks were made to initialised status.
As per SAP while regenerating the data basis system created new table for status rather than the old table (not sure why)
Hence all the old period task status were made to initialised status.
SAP made a fix in the system & we could solve the issue.
Thanks
Kamal

Similar Messages

  • Issue In Task List, When I select any SP13 task item its updating task status to "Completed" automatically

    Hi Guys,
    A strange issue I am facing in SharePoint 2013 task list. When I just select any task its updated the task status automatically to "Completed". When I unselect task its updated task status to "Not Started" automatically. I don't know
    why its happening.

    Hi,
    It is by design in SharePoint 2013, you can quickly mark tasks as complete by clicking the checkbox.
    If you want to select the item, please check the “select” column.
    Select Items:
    Mark task complete: 
    More information:
    http://blogs.office.com/2012/08/13/managing-tasks-in-sharepoint/
    Best Regards
    Dennis Guo
    TechNet Community Support

  • Cons Mon - Task group status issue

    Hi All,
    When we run the update at task group level system first stimulating the data & before accessing the cube its checking for authorisation and even if the user dont have authorisation its updating the task status.. & when we see the status of the task its showing the user name. which is giving lots of confusion to the other users.
    How can we avoide it any advice will be very much appriciated.
    Please let me know if any thing is not clear so that I can elabarate more.
    Thanks
    Kamal

    Hi Kamal,
    Are you sure that the user does not have authorisation for ALL consolidation units in your hierachy?
    eg if the user has updated the status of only 1 unit in the hierarchy then the top level group status will still be updated.
    And of course, you can use transaction code SU53 to see which authorisations are being checked.

  • Task status is not changed in UWL

    Task status is not changing when it is executed in UWL. the tasks comes from R/3 when a workflow is executed . SAP says realtime refresh not supportinng in current version of UWL. please let me know any workaround to solve this issue.
    Thanks ,
    Sarath

    Hi,
    Unfortuntely, there does not seem to be a 'working' workaround for the issue.
    This is resolved however in SAP Netweaver 7.0 EhP2 or 7.20 versions.
    Please see /thread/1564782 [original link is broken]
    Regards,
    Srikishan

  • Task status not changing in UWL

    Task status is not changed in UWL when the task is executed from UWL . workitems transfered from R/3 by executing a workflow .SAP says real time refresh not supports in this UWL version.
    please let me know any workaround to solve this issue.
    Thanks
    Sarath

    thats right.
    UWL does not refresh immediately. You need to refresh the UWL again.
    As I saw over internet, the Real-time Refresh feature for Universal Worklist is available in SAP NetWeaver 702 SP02 and above, and SAP NetWeaver CE 7.20 SP01 and above.
    Thanks
    Krishna

  • Sort by Task Status doesn't stay sorted?

    A useful feature is to sort computer lists by task status.... at least it would be a useful feature if it worked, but I find that it 'deorganizes' itself after a second. Oops!
    Does anyone have a solution or should i just pray the bug gets fixed some day? (as usual...)

    I was waiting until this evening to see if restarting the server would fix this.
    And it has.
    All the tasks work perfectly - those failing with both the error codes, so that's my own apps and also the SyncBackup tasks.
    For now...
    Digging around some more, I'm led to believe this might have something to do with "Desktop Heap" size.
    http://blogs.msdn.com/b/ntdebugging/archive/2007/01/04/desktop-heap-overview.aspx
    Thing is, this never used to happen up until very recently on one of my servers, I migrated to a new one (not because of this) mystified by the problem and hoping the problem would vanish. And it did, at first.
    One other server I have which runs SyncBackup tasks doesn't have this issue.
    All Windows Server 2008 R2 and all up to date with hotfixes.
    I'm reluctant to modify the Desktop Heap size without a more detailed understanding and still mystified as to why this all worked perfectly until about three weeks ago.

  • Unable to see views Active Alerts, Discovered Inventory, Distributed Applicatios, Task Status, Unix/Linux Computers, Windows Computer under Monitoring workspace after upgrading to UR6

    Hi All,
    Recently I upgraded SCOM 2012 SP1 CU5 to CU6 and facing following issue:
    1. New menu item got grayed out that appears upon the right click on Monitoring node(root) under monitoring workspace.
    2.  When we click Monitoring in the navigation pane, the Monitoring Overview opens, which displays a summary of health states and alerts. if we click any of the numbers in the overview, it is supposed to open a state view of the selected category but
    this function does not work now.
    3. Views like Active Alerts, Discovered Inventory, Distributed Applications, Task Status, Unix/Linux Computers and Windows Computer do not appear under Monitoring workspace after upgrading to UR6.
    Has anyone out there facing such kind of issue? Any help on fixing these issues would be appreciating.  Thanks in advance.

    Hi,
    Have you re-opened the operation manager console?
    There are some known issues when intalling UR6, please go through it:
    http://support.microsoft.com/kb/2929885
    In addition, there is CU7 for SCOM sp1, why not installing the newest one:
    http://support.microsoft.com/kb/2965420
    Regards,
    Yan Li
    Regards, Yan Li

  • HPDM task status of "Synchronising"

    Hi
    We are having issues imaging HP T610 thin clients at one of our remote sites, which has a local HPDM gateway server/repository connecting back to our central HPDM management server and master repository. This was all working fine, but now when we deploy the imaging task sequence to a device it doesn’t progress beyond the “waiting” phase. When I view the task log the task status sits at “Synchronizing” and doesn’t progress.
    We have recently created a second image to test some new functionality, and this image hasn’t yet replicated to the repository of the site where we’re having the build issue (due to limited bandwidth), but it’s the old image that we’re trying to deploy. Is it expected behaviour of HPDM that if the child repository is out of date HPDM won’t allow that source to be used for imaging until it’s up to date?
    Thanks
    Steve

    Hi Dwayne,
    According to your description, my understanding is that you want to add a column into the document library to show the Task Status.
    Assuming you create a new column called “Status” in the document library(called “doc_approval”) used as showing Task Status, then you need to create a new workflow on your tasks list.
    You can design this workflow as the following screenshot, and set this workflow start automatically when an item is changed.
    For the first red area, the variable:ID is an Integer.
    For the IF condition, you need to set it like the below:
    Best Regards,
    Wendy
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Wendy Li
    TechNet Community Support

  • Task Status "Process Draft"

    I''m working with support on an issue that I previously describe here: http://forums.adobe.com/thread/777349?tstart=0
    I noticed with one of the process instances that encountered the issue, that the task status is set to "Process Draft" instead of the task status that I'm typically used to seeing when a task is assigned, which is "Process Created."
    The only bit of info that I could find on "Process Draft" is here: http://help.adobe.com/en_US/livecycle/9.0/adminHelp/000354.html
    Does anyone know why a task status would be set to "Process Draft"? And could that possibly be related to the problem I described in the other thread?

    If Workspace is used to work with tasks, then a task would have status "Process Draft" once a Workspace User has saved the task (via Save button, see image) but not yet completed the task.

  • Task status  report in cProject 3.1

    Hi,
    I want to extract task status report from cProject 3.1.
    Report should contain task name, status, start date,end date , effort etc.
    Thanks in advance
    Shiv

    Hi,
    Activate the form DPR_TASK_HIER for a particular Project type in SPRO screen. Now keep the cursor on any task in cProjects & click on Print pushbutton, this will generate a PDF Report which will contain Task name, Constraint dates, actual dates, administration details etc. In order to add more data to the Report, goto transaction SAMRTFORMS & edit the form DPR_TASK_HIER.
    Hope this will help you.
    Regards,
    Sujay G

  • Remote Software Updates and Sending Task Status to User

    I am updating user's machines using ARD 3 with the unix command 'softwareupdate -i -a'. With some updates, a restart is required and ARD posts this within the task status column.
    I was wondering if there was a way to grab that task status of "restart needed" or "succeeded" and then send that to the user when the software update has completed.
    Any help would be appreciated.
    Thanks.

    System restart checkbox is used to control what happens outside of MW.
    If you have no MW and did not select to restart outside of MW then systems will reboot after installation completes (unless user overrides it and does it sooner). Keep in mind that the 90 minute and 15 minute restart countdowns will be displayed if user is
    logged in (unless you have changed the times) if user did not interact with any notifications to select other options like install and reboot ahead of time.
    If you have MW and did not select to restart outside of MW, then PC will not reboot until MW starts (unless user overrides it, of course).
    If you select to reboot outside of MW checkbox then PC will reboot after installation ends, no matter if MW is set or not.

  • What are the attributes available on Task Status Notification?

    Hi,
    I need to send the information below when a task is completed or rejected. So I would like to know if they are available. I think so because I've got them from Task Status Notification (OIM standard email definition). If not, what are the attributes available on Task Notification?
    <Tasks.Task Name> is <Task Details.Status>.
    <Task Details.Status>
    <Resource.Resource Name>
    Target User: <Users.First Name> <Users.Last Name> [<Users.User ID>]
    Assigned to: <Task Information.Assignee First Name> <Task Information.Assignee Last Name> [<Task Information.Assignee User ID>]
    Response Code : <Responses.Response>
    Response Description : <Responses.Description>
    Error Details : <Task Details.Reason>
    Thanks,
    Renato.
    Hi,
    I have implemented some java code to workaround the problem below... But I don't believe this does'n work in OIM :-):-):-):-) Please, tell me if you are using task status notification in OIM and if your email defintion has the variables below.
    Thanks,
    Hi,
    One of OIM email templates is Task Status Email Notification. I am trying to notify the user (Notification tab) using this template but it didn't work. Even when I set the Object Name and Process Name values for an email definition, it does not work.
    How have you implemented task status notification in your workflows? I think if this template exists in OIM, by default, so it is posible to have the information below during notifications.
    I think I'll have to call Oracle's Support.
    =======================================================
    Subject: Process task <Tasks.Task Name> is <Task Details.Status>.
    Body:
    The Process task <Tasks.Task Name> is <Task Details.Status>.
    The details of this process task are as follows:
    Process Task Name: <Tasks.Task Name>
    Process Task Status: <Task Details.Status>
    Resource Name: <Resource.Resource Name>
    Target User: <Users.First Name> <Users.Last Name> [<Users.User ID>]
    Assigned to: <Task Information.Assignee First Name> <Task Information.Assignee Last Name> [<Task Information.Assignee User ID>]
    Response Code : <Responses.Response>
    Response Description : <Responses.Description>
    Error Details : <Task Details.Reason>
    =======================================================
    As I've said, the e-mail was sent but in blank:
    The Process task is .
    The details of this process task are as follows:
    Process Task Name:
    Process Task Status:
    Resource Name:
    Target User: []
    Assigned to: []
    Response Code :
    Response Description :
    Error Details :
    Is it possible to have those fields available on notifications?
    Thanks,
    Edited by: Renato.Guimaraes on 23/10/2009 08:05
    Edited by: Renato.Guimaraes on 24/10/2009 15:57
    Edited by: Renato.Guimaraes on 26/10/2009 13:31
    I didn't get any answer until now.. Below it is what I've done.
    a) Create an entity adapter that is assigned to the post-update of the Specific Task Info data object.
    b) Select the task information searching by SCH_KEY, for example (I have to do more tests)
    SELECT
    sch.sch_key, sch.sch_status, sch.sch_note, mil.mil_key, rsc.rsc_data, rsc.rsc_desc
    FROM
    osi, sch, mil, rsc
    WHERE
    mil.mil_key = osi.mil_key and
    osi.sch_key = sch.sch_key and
    sch.sch_key = ? and
    rsc.rsc_key = osi.rsc_key
    c) Load the e-mail definition template and replaces the fields
    d) Sends the e-mail
    With that I solved another problem: I have to send an e-mail always the assignee adds a note to the task.
    Edited by: Renato.Guimaraes on 28/10/2009 08:51. How I did that
    Edited by: Renato.Guimaraes on 12/11/2009 12:19
    Edited by: Renato.Guimaraes on 13/11/2009 07:22 Changed the Thread Subject

    Hi Experts,
    I want to extend my doubt a little more.
    I have a requirment  as below.
    User will enter a range of Date say 01.06.2011 to 25.06.2011.
    I need to show him data in two columns one cloumn for the entered day range and second column for prevoius month date rangei.e(01.05.2011 to 25.05.2011)
    can i achive this without  using Customer Exit.
    Regards
    Laxman

  • XPath expression of task status

    Hi,
    Does anyone know what is the XPath expression for human task status? I need to put a condition that if a task is still assigned, do something in while loop..
    Thanks.

    Hi,
    That should be it:
    bpws:getVariableData('yourVar','payload','/task:task/task:systemAttributes/task:state')
    Arik

  • Changing task status in code

    Hi Experts,
    I saw in a thread that different functions were advised to be used whenever changing WBS status programmatically:
    System status change of WBS element
    I was wondering if a similar list also exists for task status. I need functions that perform the same checks when changing status than the standard for:
    releasing tasks
    confirming partially / completely tasks
    teco tasks
    Thanks in advance
    Kind regards,
    Neil

    Not aware regardging Program availability. But the same if you are amuaaly able to set up and to avoid ling time in data upload / Migration.. You can develop BDC and use the same for the changing status of task. I believe  by task, you  are referrring  network activity.
    Regards
    Nitin P.

  • DELETE TASK STATUS in TABLE

    Hi Gurus,
                  If I delete notification task those tasks status is not showing delete status in jest table.Due to thiswhen we want to execut the transaction( client Development) for all notification having open task then these delete notification tasks appears in the report.
    My reqirement is that when a notification task gets deleted where i get the delete status for task.
    Please help
    Regards
    Anil Kumar

    Hi,
    If you don't want to diplay the notificaitons for which the tasks have been set for deletion here is the procedure to follow.
    1. Create a status profile with the status DLFL.
    2. Create a selection profile and assign the above status profile with the status DLFL as NOT.
    3. While running the transaction QM13 run with the above seleciton profile. This will select all the notifications except the notificaitons for which the tasks have been deleted.
    Hope this  helps.
    Prakash Dhabadi

Maybe you are looking for