XPath expression of task status

Hi,
Does anyone know what is the XPath expression for human task status? I need to put a condition that if a task is still assigned, do something in while loop..
Thanks.

Hi,
That should be it:
bpws:getVariableData('yourVar','payload','/task:task/task:systemAttributes/task:state')
Arik

Similar Messages

Using xpath-expressions inside Task Instructions

Hi all,
I have a process where I would like to build up the task Instructions in a string variable. However I cannot seem to resolve xpath values when I am putting my string as the task instruction.
How can I do this?
Thanks in advance
Sincerely
Kim Christensen

Hi again Marcel - thanks for your quick reply
However I am not sure I und erstand your answer correctly.
I have a string variable (str_Inctructions) that I want to set as my Task Instruction.
So at a point in my process I create a set value with an expression like this:
str_Instructions = 'Here are some instructions for {$/process_data/myOtherVar$} please follow them.'
I then set str_Instructions as the Task Instructions (an xpath-expression). When I get the Task in Workspace I see the {$/process_data/myOthervariable$} instead of the value of myOtherVar.
So how can I get the value of myOtherVar?

XPATH expression to get Array node

Hi
I have a problem with an XPATH expression in BPEL. I want to get to a particular node in the following result set ..
<return xmlns:ns2="http://schemas.xmlsoap.org/soap/encoding/" xmlns:ns3="http://com.quion.taken.services/ITakenService.xsd" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="ns2:Array" ns2:arrayType="ns3:com_quion_dto_taken_BouwnotaVoorraadDTO[2]">
<item xsi:type="ns3:com_quion_dto_taken_BouwnotaVoorraadDTO">
<begunstigde xsi:type="xsd:string">Sjoerd</begunstigde>
<datum xsi:type="xsd:dateTime">2005-10-31T23:00:00.000Z</datum>
<bedrag xsi:type="xsd:string">1000.0</bedrag>
<geldLeningId xsi:type="xsd:string">4.0</geldLeningId>
<rekeningnummer xsi:type="xsd:string">1234</rekeningnummer>
<notaId xsi:type="xsd:string">1.0</notaId>
</item>
<item xsi:type="ns3:com_quion_dto_taken_BouwnotaVoorraadDTO">
<begunstigde xsi:type="xsd:string">Laszlo</begunstigde>
<datum xsi:type="xsd:dateTime">2005-10-31T23:00:00.000Z</datum>
<bedrag xsi:type="xsd:string">1.0</bedrag>
<geldLeningId xsi:type="xsd:string">4.0</geldLeningId>
<rekeningnummer xsi:type="xsd:string">5678</rekeningnummer>
<notaId xsi:type="xsd:string">2.0</notaId>
</item>
</return>
The first thing is that my variable in BPEL does not show the ïtem"level", it shows for example 'return/notaId'.
However I can get to the second node by keying in
EXPRESSION 1:
bpws:getVariableData('invokeGetBouwnotaVoorraadVoorLening_getBouwnotaVoorraadVoorLening_OutputVariable','return','/return/item[1]/notaId')
No I want to dynamically determine the particular node instance. I do this as follows [copied from the Array sample]:
EXPRESSION 2:
bpws:getVariableData('invokeGetBouwnotaVoorraadVoorLening_getBouwnotaVoorraadVoorLening_OutputVariable','return','/return/item[', bpws:getVariableData('i'),']/notaId')
BPEL throws the following error
assignNotaId (faulted)
[2005/11/09 09:49:36] Updated variable "invokeTaskManager_initiateTask_InputVariable" More...
<invokeTaskManager_initiateTask_InputVariable>
<part xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" name="payload">
<task xmlns="http://services.oracle.com/bpel/task">
<taskId />
<title />
<creationDate />
<creator />
<modifyDate />
<modifier />
<assignee>jstein</assignee>
<status />
<expired />
<expirationDate />
<duration />
<priority />
<template />
<customKey />
<conclusion />
<attachment />
</task>
</part>
</invokeTaskManager_initiateTask_InputVariable>
[2005/11/09 09:49:36] Error in evaluate <from> expression at line "172". The result is empty for the XPath expression : "bpws:getVariableData('invokeGetBouwnotaVoorraadVoorLening_getBouwnotaVoorraadVoorLening_OutputVariable','return','/return/item[', bpws:getVariableData('i'),']/notaId')".
[2005/11/09 09:49:36] "{http://schemas.xmlsoap.org/ws/2003/03/business-process/}selectionFailure" has been thrown. less
<selectionFailure xmlns="http://schemas.xmlsoap.org/ws/2003/03/business-process/">
<part name="summary">
<summary>empty variable/expression result. xpath variable/expression expression "bpws:getVariableData('invokeGetBouwnotaVoorraadVoorLening_getBouwnotaVoorraadVoorLening_OutputVariable','return','/return/item[', bpws:getVariableData('i'),']/notaId')" is empty at line 172, when attempting reading/copying it. Please make sure the variable/expression result "bpws:getVariableData('invokeGetBouwnotaVoorraadVoorLening_getBouwnotaVoorraadVoorLening_OutputVariable','return','/return/item[', bpws:getVariableData('i'),']/notaId')" is not empty.</summary>
What is wrong with my expression 2?
Thanks
Jan Willem

This Example works fine for arrays that are part of a WSDL message.
But in 10.1.3.1 this does not work with a array that is part of an XSD declaration
for Example XSD snippet
<xsd:element name="itemList">
          <xsd:complexType>
               <xsd:sequence>
                    <xsd:element maxOccurs="unbounded" minOccurs="1" ref="tns:Item" />
               </xsd:sequence>
          </xsd:complexType>
     </xsd:element>
using the following in assign statement
<copy>
<from expression="concat('/ns9:itemList/ns9:Item[',string(bpws:getVariableData('index')),']')"/>
<to variable="idxXpath"/>
</copy>
<copy>
<from expression="bpws:getVariableData('OutputItemList',bpws:getVariableData('idxXpath'))"/>
<to variable="idx_item"/>
</copy>
gives a compiler error that is
Error(176):
[Error ORABPEL-10085]: invalid argument
[Description]: in line 176 of "D:\OnlineShopping_1\bpel\OnlineShopping.bpel", the second argument "bpws:getVariableData("idxXpath")" for getVariableData is not a literal expression.
[Potential fix]: Please correct the second argument, you might need to escape using single quote or " to make it literal.
Can anyone site the reason for the same or a possible solution?
Message was edited by:
user607972

Human Task – Using expressions in task parameters

Hi All,
In my BPEL process I have a Human Task with about 15 task parameters. I'm trying to define BPEL variables to each and every parameter. I am able to select a type 'variable' variable (ie. /ns18:OutputParameters/ns18:street_name) from tree view and save.
However, whenever I click on the little flash-light icon and create a type 'expression' using the XPath expression builder I'm having problems saving the change.
In details this is what happens,
0.) Double click on Human Task
1.) Click on flash-light icon in front of a parameter.
2.) Select Type expression variable.
3.) Click XPath expression builder.
4.) Select conversion function 'string()' and double click to add.
5.) Double click on the required BPEL variable to add.
6.) Something similar to the following expression is created,
string(bpws:getVariableData('InvokeGetAllABCInformation_FetchABCInformationService_OutputVariable','OutputParameters','/ns18:OutputParameters/ns18:ACC_ID'))
7.) Click OK twice and then Apply/OK to go back to BPEL diagram view.
8.) Now at this point the BPEL is not saved and the tab-title is italic to show it’s unsaved.
9.) Save the BPEL to disk.
10.) Double click on the Human Task to show parameters and variables defined.
11.) The previously defined expression type variable is still there.
12.) However now if I click either 'Apply' of 'OK' buttons without making any changes the BPEL diagram tab-title becomes italic and when the BPEL is saved to the disk, it forgets about all the expression type variables that was previously defined. Also note that cancelling wouldn't change anything.
This is a serious issue as I can't change any setting to a Human Task parameter list, as every time I make a change, I loose all the expression type variable declarations.
Could this be a bug in JDeveloper?
My JDeveloper Studio Edition Version is: 10.1.3.3.0.4157
Any help on this would be greatly appreciated.
Thanks.
Shaminda.

ok, looks like no one knows what's going on,
Here's the workaround that I came up with, If anyone is interested.
Create a custom XSD (schema) with required variables in it (to be used by expression types vars), and use a copy operation before the human task and create the expression types in there. Then use the schema to map the values to the human task.

How to evaluate dynamic XPath expression in BPEL?

I have an xml file where I keep many settings for my BPEL process. At runtime, I read the file and I want to select values from it based on values in the process payload.
For example, imagine that the process payload is an order:
<order>
<header>
<id/>
<customer_id/>
<team_id/>
</header>
<items>
<item>
<id/>
<sku/>
<price/>
<quantity/>
</item>
</items>
</order>
Now, in my xml settings file, I have a section where I keep a mapping of "team_id" and "assignment_group", so that for each team id, I can select the appropriate group to whom a task should be assigned. The relevant section of the settings file will look something like this:
<assignment_groups>
<group team_id='0923230'>invoice_approvers</group>
<group team_id='3094303'>order_approvers</group>
<group team_id='3434355'>shipping_approvers</group>
</assignment_groups>
So, imagine I get an order input to my process where the team_id is '3094303'. Now I have to lookup the correct assignment group in my settings file.
So, I construct the dynamic XPath expression
/settings/assignment_groups/group[@team_id=3094303]
I know that this would evaluate to "order_approvers". However, even though I have the XPath expression in a BPEL variable, and I have my settings file as a BPEL variable also, I don't know how to execute the XPath expression against the settings BPEL variable to retrieve the correct value.
Any ideas appreciated.
Thanks,
Jack

James:
Thank you for the response. Incidentally, this is the very same document and section that I have been looking at for guidance. Specifically, the section titled "Dynamically indexing by Constructing an XPath at Run Time" on page 12-13.
I tried to do something similar to the example at the top of page 13:
<variable name="iterator" type="xsd:integer"/>
<assign>
<copy>
<from expression="concat('/invoice/line-item[',bpws:getVariableData('iterator'), ']/line-total')"/>
<to variable="xpath"/>
</copy>
<copy>
<from expression="bpws:getVariableData('input', 'payload',bpws:getVariableData('xpath')) + ..."/>
</copy>
</assign>
I am able to achieve the first copy operation to get my dynamic XPath into a BPEL variable and that's fairly straightforward. But I am unable to get the second copy to work. Specifically, I am not sure what to put in the second argument of the bpws:getVariableData function. I have tried many different combinations, but when I try to compile my program, I get the following compilation error:
Error:
[Error ORABPEL-10902]: compilation failed
[Description]: in "C:\code\TrainingWS\SampleGetSettings\bpel\SampleGetSettings.bpel", XML parsing failed because "org.collaxa.thirdparty.jaxen.expr.DefaultFunctionCallExpr".
[Potential fix]: n/a.
Thanks,
Jack

The XPath expression problem

Hi everyone,
I developed a workflow. I builded and deployed successfully.
And I assing this workflow to a policy.
I create a request, but this request gave a fail.
Error in <assign> expression: <to> value is empty at line "181". The XPath expression : "" returns zero node, when applied to document shown below:
Line 181 :
<copy>
<from variable="inputVariable" part="payload"
query="/ns3:process/ns4:RequestID"/>
<to variable="initiateTaskInput" part="payload"
query="/ns2:initiateTask/task:task/task:payload/task:RequestID"/>
</copy>
It seems that I could not take requestID.
Do you have any idea ?
Thanks for your help.
Regards

How did you resolve the issue? We're facing the same problem.

XPath expression failed to execute.

Hi Everybody ,
I am working AIA PIP 3.1 for JDE E1.I am facing some errors so that i can't proceed.
See the log errors as below:
javax.xml.ws.soap.SOAPFaultException: XPath expression failed to execute. An error occurs while processing the XPath expression; the expression is ora:processXSLT('xsl/Xform_BillOfMaterialsListABM_to_BillOfMaterialsListAXML.xsl',bpws:getVariableData('InitialLoadBillOfMaterialsListReqMsg','InitialLoadBillOfMaterialsList'),bpws:getVariableData('Parameters')). The XPath expression failed to execute; the reason was: oracle.fabric.common.xml.xpath.XPathFunctionException: javax.xml.transform.TransformerException: oramds:/deployed-composites/default/InitialLoadBillOfMaterialsListJDEE1toAgileImpl_rev1.0/xsl/Xform_BillOfMaterialsListABM_to_BillOfMaterialsListAXML.xsl<Line 18, Column 271>: XML-22044: (Error) Extension function error: Error invoking 'lookupXRef':'oracle.tip.xref.exception.RepositoryException: lookup could not find values in column name "AGILE_01" for table name "oramds:/apps/AIAMetaData/xref/ITEM_ITEMID.xref" using reference column name "JDEE1_01" and reference value "731882::M30" Please ensure lookup criteria has a match.'. Check the detailed root cause described in the exception message text and verify that the XPath query is correct.
Please reply me ASAP,
Waiting for your response.....
Regards
Jyoti Nayak

Hi,
Ya i checked the data for same table,but i didn't get any XREF related information in xref_data table.
Did you mean that, data should already present under AIAFPINST_XREF.Probably xref is meant for storing dynamic value.
Please check the above error and reply me soon.
With Regards
Jyoti Nayak

Task status report in cProject 3.1

Hi,
I want to extract task status report from cProject 3.1.
Report should contain task name, status, start date,end date , effort etc.
Thanks in advance
Shiv

Hi,
Activate the form DPR_TASK_HIER for a particular Project type in SPRO screen. Now keep the cursor on any task in cProjects & click on Print pushbutton, this will generate a PDF Report which will contain Task name, Constraint dates, actual dates, administration details etc. In order to add more data to the Report, goto transaction SAMRTFORMS & edit the form DPR_TASK_HIER.
Hope this will help you.
Regards,
Sujay G

Remote Software Updates and Sending Task Status to User

I am updating user's machines using ARD 3 with the unix command 'softwareupdate -i -a'. With some updates, a restart is required and ARD posts this within the task status column.
I was wondering if there was a way to grab that task status of "restart needed" or "succeeded" and then send that to the user when the software update has completed.
Any help would be appreciated.
Thanks.

System restart checkbox is used to control what happens outside of MW.
If you have no MW and did not select to restart outside of MW then systems will reboot after installation completes (unless user overrides it and does it sooner). Keep in mind that the 90 minute and 15 minute restart countdowns will be displayed if user is
logged in (unless you have changed the times) if user did not interact with any notifications to select other options like install and reboot ahead of time.
If you have MW and did not select to restart outside of MW, then PC will not reboot until MW starts (unless user overrides it, of course).
If you select to reboot outside of MW checkbox then PC will reboot after installation ends, no matter if MW is set or not.

Using the variable placeholder ? in an XPath expression

I'm trying to using the variable operator (?) in an Oracle prepared statement used in a query where clause. Here is the query:
select xt.APPLICATION_NAME, xt.VERSION, xt.EVENT_TYPE, xt.SENDING_SITE, xt.RECEIVING_SITE, xt.EVENT_ID
      from AUDITED_EVENT_XML_MIN e,
         XMLTable(XMLNAMESPACES('http://gov/va/med/datasharing/audit/endpoint/audit' AS "xae"),
                '/xae:auditable-event'
                PASSING e.xml_event_content
                COLUMNS
                APPLICATION_NAME VARCHAR2(255) PATH 'xae:application-name',
                VERSION          VARCHAR2(255) PATH 'xae:version',
                EVENT_TYPE       VARCHAR2(255) PATH 'xae:event-type',
                SENDING_SITE     VARCHAR2(255) PATH 'xae:xml-event-content/*/MSH/MSH.4/HD.2',
                RECEIVING_SITE   VARCHAR2(255) PATH 'xae:xml-event-content/*/MSH/MSH.6/HD.2',
                EVENT_ID         VARCHAR2(255) PATH 'xae:xml-event-content/*/MSH/MSH.10') xt
            where existsNode(E.XML_EVENT_CONTENT, '/xae:auditable-event[xae:event-type=?]','xmlns:xae="http://gov/va/med/datasharing/audit/endpoint/audit"') = 1This code works when the ? is replaced with "aValue". I need to use the ? so that my Java client can pass a variable value into the query.
Is this a supportable feature or am I doing something wrong?
I didn't see any examples in the Oracle XML DB Developers Guide where there was a ? in an XPath expression.
I also tried "?" with the same issue...
Here is the version info:
SQL*Plus: Release 11.1.0.6.0 - Production on Mon Sep 10 18:41:55 2012
Copyright (c) 1982, 2007, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing optionsAny assistance would be greatly appreciated.
Thanks in advance...
Edited by: flyeagle5683 on Sep 10, 2012 5:49 PM

select xt.APPLICATION_NAME, xt.VERSION, xt.EVENT_TYPE, xt.SENDING_SITE, xt.RECEIVING_SITE, xt.EVENT_ID
      from AUDITED_EVENT_XML_MIN e,
         XMLTable(XMLNAMESPACES('http://gov/va/med/datasharing/audit/endpoint/audit' AS "xae"),
                '/xae:auditable-event'
                PASSING e.xml_event_content
                COLUMNS
                APPLICATION_NAME VARCHAR2(255) PATH 'xae:application-name',
                VERSION          VARCHAR2(255) PATH 'xae:version',
                EVENT_TYPE       VARCHAR2(255) PATH 'xae:event-type',
                SENDING_SITE     VARCHAR2(255) PATH 'xae:xml-event-content/*/MSH/MSH.4/HD.2',
                RECEIVING_SITE   VARCHAR2(255) PATH 'xae:xml-event-content/*/MSH/MSH.6/HD.2',
                EVENT_ID         VARCHAR2(255) PATH 'xae:xml-event-content/*/MSH/MSH.10') xt
            where XMLEXISTS(
                       'declarre namespace xae ="http://gov/va/med/datasharing/audit/endpoint/audit"; (: :)
                        $XML/xae:auditable-event[xae:event-type=$VALUE]'
                        passing e.xml_event_content as "XML",
                                  :1 as "VALUE"
            ) or you can do
select xt.APPLICATION_NAME, xt.VERSION, xt.EVENT_TYPE, xt.SENDING_SITE, xt.RECEIVING_SITE, xt.EVENT_ID
      from AUDITED_EVENT_XML_MIN e,
         XMLTable(XMLNAMESPACES('http://gov/va/med/datasharing/audit/endpoint/audit' AS "xae"),
                '/xae:auditable-event'
                PASSING e.xml_event_content
                COLUMNS
                APPLICATION_NAME VARCHAR2(255) PATH 'xae:application-name',
                VERSION          VARCHAR2(255) PATH 'xae:version',
                EVENT_TYPE       VARCHAR2(255) PATH 'xae:event-type',
                SENDING_SITE     VARCHAR2(255) PATH 'xae:xml-event-content/*/MSH/MSH.4/HD.2',
                RECEIVING_SITE   VARCHAR2(255) PATH 'xae:xml-event-content/*/MSH/MSH.6/HD.2',
                EVENT_ID         VARCHAR2(255) PATH 'xae:xml-event-content/*/MSH/MSH.10') xt
      WHERE EVENT_TYPE = :1Edited by: mdrake on Sep 10, 2012 7:23 PM
Edited by: mdrake on Sep 10, 2012 7:24 PM

Using the variable ? operator in an XPath Expression

I'm trying to using the variable operator (?) in an Oracle prepared statement used in a query where clause. Here is the query:
select xt.APPLICATION_NAME, xt.VERSION, xt.EVENT_TYPE, xt.SENDING_SITE, xt.RECEIVING_SITE, xt.EVENT_ID
      from AUDITED_EVENT_XML_MIN e,
         XMLTable(XMLNAMESPACES('http://gov/va/med/datasharing/audit/endpoint/audit' AS "xae"),
                '/xae:auditable-event'
                PASSING e.xml_event_content
                COLUMNS
                APPLICATION_NAME VARCHAR2(255) PATH 'xae:application-name',
                VERSION          VARCHAR2(255) PATH 'xae:version',
                EVENT_TYPE       VARCHAR2(255) PATH 'xae:event-type',
                SENDING_SITE     VARCHAR2(255) PATH 'xae:xml-event-content/*/MSH/MSH.4/HD.2',
                RECEIVING_SITE   VARCHAR2(255) PATH 'xae:xml-event-content/*/MSH/MSH.6/HD.2',
                EVENT_ID         VARCHAR2(255) PATH 'xae:xml-event-content/*/MSH/MSH.10') xt
            where existsNode(E.XML_EVENT_CONTENT, '/xae:auditable-event[xae:event-type=?]','xmlns:xae="http://gov/va/med/datasharing/audit/endpoint/audit"') = 1This code works when the ? is replaced with "aValue". I need to use the ? so that my Java client can pass a variable value into the query.
Is this a supportable feature or am I doing something wrong?
I didn't see any examples in the Oracle XML DB Developers Guide where there was a ? in an XPath expression.
I also tried "?" with the same issue...
Here is the version info:
SQL*Plus: Release 11.1.0.6.0 - Production on Mon Sep 10 18:41:55 2012
Copyright (c) 1982, 2007, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing optionsAny assistance would be greatly appreciated.
Thanks in advance...

I incorporated this suggestion and it worked very well. Thanks!
Now I have converted my solution to use a structured index. As such, I want to write the where clauses in terms of column names rather than XPath expressions.
I hoped it was as simple as changing the code that generates the XPath expression to generate a SQL expression. After making that change, I'm now getting this error:
Caused by: java.sql.SQLSyntaxErrorException: ORA-00920: invalid relational operator
     at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:91)
     at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:112)
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:173)
     at oracle.jdbc.driver.T2CConnection.checkError(T2CConnection.java:686)
     at oracle.jdbc.driver.T2CConnection.checkError(T2CConnection.java:617)
     at oracle.jdbc.driver.T2CPreparedStatement.executeForDescribe(T2CPreparedStatement.java:559)
     at oracle.jdbc.driver.OracleStatement.executeMaybeDescribe(OracleStatement.java:1077)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1186)
     at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3381)
     at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:3425)
     at oracle.jdbc.driver.OraclePreparedStatementWrapper.executeQuery(OraclePreparedStatementWrapper.java:1490)
     at gov.va.med.datasharing.audit.dao.jdbc.runner.MapQueryRunner.run(MapQueryRunner.java:47)
     at gov.va.med.datasharing.audit.web.dao.jdbc.AuditableEventsQueryDAOImpl.getAuditableEventsByDate(AuditableEventsQueryDAOImpl.java:150)It seemed to me that if it worked for the XPath expression that it should also work for the SQL expression.
The static SQL is:
SELECT PK_ID, EVENT_TYPE, OUTCOME, SENDING_SITE, RECEIVING_SITE, CREATED_TIME, EVENT_ID, PATIENT_ID FROM
(SELECT rownum as rn, PK_ID, EVENT_TYPE, OUTCOME, SENDING_SITE, RECEIVING_SITE, CREATED_TIME, EVENT_ID, PATIENT_ID FROM
     (SELECT aet.AUDITABLE_EVENT_XML_PK_ID AS PK_ID, xt.EVENT_TYPE, xt.OUTCOME, xt.SENDING_SITE, xt.RECEIVING_SITE, aet.CREATED_TIME as CREATED_TIME, xt.EVENT_ID, xt.PATIENT_ID
        FROM AUDITABLE_EVENT_XML aet,
          XMLTable(XMLNAMESPACES('http://gov/va/med/datasharing/audit/endpoint/audit' AS "xae"),
            '/xae:auditable-event'
            PASSING aet.xml_event_content
            COLUMNS
            EVENT_TYPE       VARCHAR2(255) PATH 'xae:event-type',
            SENDING_SITE     VARCHAR2(255) PATH 'xae:sending-site',
            RECEIVING_SITE   VARCHAR2(255) PATH 'xae:receiving-site',
            EVENT_ID         VARCHAR2(255) PATH 'xae:event-id',
            PATIENT_ID           VARCHAR2(255) PATH 'xae:patient-id',
            OUTCOME                VARCHAR2(255) PATH 'xae:outcome') xt
        WHERE aet.CREATED_TIME BETWEEN ? AND ?
             AND ?
      ) ORDER BY CREATED_TIME desc
    ) WHERE rn > ? and rn <= ?So I'm thinking that Oracle must perform strong checking in SQL, not allowing the '=' operator to be substituted. If I run this query in Toad, replacing the ? with the SQL, it runs fine...
Can someone tell me whether or not this is a legal substitution?
The SQL that runs in Toad is:
SELECT PK_ID, EVENT_TYPE, OUTCOME, SENDING_SITE, RECEIVING_SITE, CREATED_TIME, EVENT_ID, PATIENT_ID FROM
(SELECT rownum as rn, PK_ID, EVENT_TYPE, OUTCOME, SENDING_SITE, RECEIVING_SITE, CREATED_TIME, EVENT_ID, PATIENT_ID FROM
     (SELECT aet.AUDITABLE_EVENT_XML_PK_ID AS PK_ID, xt.EVENT_TYPE, xt.OUTCOME, xt.SENDING_SITE, xt.RECEIVING_SITE, aet.CREATED_TIME as CREATED_TIME, xt.EVENT_ID, xt.PATIENT_ID
        FROM AUDITABLE_EVENT_XML aet,
          XMLTable(XMLNAMESPACES('http://gov/va/med/datasharing/audit/endpoint/audit' AS "xae"),
            '/xae:auditable-event'
            PASSING aet.xml_event_content
            COLUMNS
            EVENT_TYPE       VARCHAR2(255) PATH 'xae:event-type',
            SENDING_SITE     VARCHAR2(255) PATH 'xae:sending-site',
            RECEIVING_SITE   VARCHAR2(255) PATH 'xae:receiving-site',
            EVENT_ID         VARCHAR2(255) PATH 'xae:event-id',
            PATIENT_ID         VARCHAR2(255) PATH 'xae:patient-id',
            OUTCOME             VARCHAR2(255) PATH 'xae:outcome') xt
        WHERE aet.CREATED_TIME BETWEEN TO_DATE ('9/19/2011 12:00:01 AM','MM/DD/YYYY HH:MI:SS PM')
                                     AND TO_DATE ('12/20/2012 12:00:00 AM','MM/DD/YYYY HH:MI:SS PM')
            AND (OUTCOME=0 or OUTCOME=1)
      ) ORDER BY CREATED_TIME desc
    ) WHERE rn > 0 and rn <= 5;Any assistance will be appreciated,
Thanks in advance.

What are the attributes available on Task Status Notification?

Hi,
I need to send the information below when a task is completed or rejected. So I would like to know if they are available. I think so because I've got them from Task Status Notification (OIM standard email definition). If not, what are the attributes available on Task Notification?
<Tasks.Task Name> is <Task Details.Status>.
<Task Details.Status>
<Resource.Resource Name>
Target User: <Users.First Name> <Users.Last Name> [<Users.User ID>]
Assigned to: <Task Information.Assignee First Name> <Task Information.Assignee Last Name> [<Task Information.Assignee User ID>]
Response Code : <Responses.Response>
Response Description : <Responses.Description>
Error Details : <Task Details.Reason>
Thanks,
Renato.
Hi,
I have implemented some java code to workaround the problem below... But I don't believe this does'n work in OIM :-):-):-):-) Please, tell me if you are using task status notification in OIM and if your email defintion has the variables below.
Thanks,
Hi,
One of OIM email templates is Task Status Email Notification. I am trying to notify the user (Notification tab) using this template but it didn't work. Even when I set the Object Name and Process Name values for an email definition, it does not work.
How have you implemented task status notification in your workflows? I think if this template exists in OIM, by default, so it is posible to have the information below during notifications.
I think I'll have to call Oracle's Support.
=======================================================
Subject: Process task <Tasks.Task Name> is <Task Details.Status>.
Body:
The Process task <Tasks.Task Name> is <Task Details.Status>.
The details of this process task are as follows:
Process Task Name: <Tasks.Task Name>
Process Task Status: <Task Details.Status>
Resource Name: <Resource.Resource Name>
Target User: <Users.First Name> <Users.Last Name> [<Users.User ID>]
Assigned to: <Task Information.Assignee First Name> <Task Information.Assignee Last Name> [<Task Information.Assignee User ID>]
Response Code : <Responses.Response>
Response Description : <Responses.Description>
Error Details : <Task Details.Reason>
=======================================================
As I've said, the e-mail was sent but in blank:
The Process task is .
The details of this process task are as follows:
Process Task Name:
Process Task Status:
Resource Name:
Target User: []
Assigned to: []
Response Code :
Response Description :
Error Details :
Is it possible to have those fields available on notifications?
Thanks,
Edited by: Renato.Guimaraes on 23/10/2009 08:05
Edited by: Renato.Guimaraes on 24/10/2009 15:57
Edited by: Renato.Guimaraes on 26/10/2009 13:31
I didn't get any answer until now.. Below it is what I've done.
a) Create an entity adapter that is assigned to the post-update of the Specific Task Info data object.
b) Select the task information searching by SCH_KEY, for example (I have to do more tests)
SELECT
sch.sch_key, sch.sch_status, sch.sch_note, mil.mil_key, rsc.rsc_data, rsc.rsc_desc
FROM
osi, sch, mil, rsc
WHERE
mil.mil_key = osi.mil_key and
osi.sch_key = sch.sch_key and
sch.sch_key = ? and
rsc.rsc_key = osi.rsc_key
c) Load the e-mail definition template and replaces the fields
d) Sends the e-mail
With that I solved another problem: I have to send an e-mail always the assignee adds a note to the task.
Edited by: Renato.Guimaraes on 28/10/2009 08:51. How I did that
Edited by: Renato.Guimaraes on 12/11/2009 12:19
Edited by: Renato.Guimaraes on 13/11/2009 07:22 Changed the Thread Subject

Hi Experts,
I want to extend my doubt a little more.
I have a requirment as below.
User will enter a range of Date say 01.06.2011 to 25.06.2011.
I need to show him data in two columns one cloumn for the entered day range and second column for prevoius month date rangei.e(01.05.2011 to 25.05.2011)
can i achive this without using Customer Exit.
Regards
Laxman

Using xpath expressions in Document-Builder

Hi all
we have re-designed our (existing) DDX-templates with the Document Builder in LC Workbench. The DDX templates are used to assemble PDFs with LC Assembler-Service.
Now my question: Is it still possible to use XPath-expression in the DDX template? Please find our example below:
The XPath expression works only if we copy&paste the DDX source code directly to the Assembler-Service property view (picture below). But referring the DDX-template doens't interpret the xpath path at run time (2nd picture below). Any help on that will be appreciated!
Works (using DDX source code directly):
Doesn't work (using DDX template):

Hi,
>
I tried to get a portion of an XML by using XPath Expressions as follows:
String xPathExpression =
"declare namespace xq='http://inti.notariado.org/indices' " +
"$this/xq:RULES/xq:RULE[@disabled]";
I think any XPath expressions which use [] are not supported in stand alone
version, but as this is not documented I could be wrong.
Regards
Arek

[Error ORABPEL-10039]: invalid xpath expression - array processing

hi,
I am trying to process multiple xml elements
<assign name="setinsideattributes">
<copy>
<from expression="ora:getElement('Receive_1_Read_InputVariable','BILL','/ns2:BILL/ns2:CMS1500['bpws:getVariableData('iterator')']/ns2:HEADER/ns2:SSN')"/>
<to variable="ssn"/>
</copy>
</assign>
where iterator is a index variable .
I am getting into this error .
Error(48):
[Error ORABPEL-10039]: invalid xpath expression
[Description]: in line 48 of "D:\OraBPELPM_1\integration\jdev\jdev\mywork\may10-workspace\multixm-catch\multixm-catch.bpel", xpath expression "ora:getElement('Receive_1_Read_InputVariable','BILL','/ns2:BILL/ns2:CMS1500['bpws:getVariableData('iterator')']/ns2:HEADER/ns2:SSN')" specified in <from> is not valid, because XPath query syntax error.
Syntax error while parsing xpath expression "ora:getElement('Receive_1_Read_InputVariable','BILL','/ns2:BILL/ns2:CMS1500['bpws:getVariableData('iterator')']/ns2:HEADER/ns2:SSN')", at position "77" the exception is Expected: ).
Please verify the xpath query "ora:getElement('Receive_1_Read_InputVariable','BILL','/ns2:BILL/ns2:CMS1500['bpws:getVariableData('iterator')']/ns2:HEADER/ns2:SSN')" which is defined in BPEL process.
[Potential fix]: Please make sure the expression is valid.
any information on how to fix this .
thanks in advance

check out this note here
http://clemensblog.blogspot.com/2006/03/bpel-looping-over-arrays-collections.html
hth clemens

XPath Expression

Hey Guys...
Currently I am working on one Xpath expression issue..as described below;
Its a File to Idoc scenario ...where in I need to check the two Item level nodes and based on that need to produce the target Idoc. and my souce structure look like this....
DT_Input
       Header ---    1 to 1
             H1
             H2
             H3
       Item -
     0 - Unbounded
          Item_1
          Item_2
          Item_3
Query : If the Item_1 and Item_3 are not equal AND Item_1 not equal to blank ...then I need to produce the target Idoc otherwise not!
Can you please help me out!!!
Cheers.,
S

You could create an advance user defined function.
fed your function with the 3 values (Item_1 and Item3).
Inside the function, check the values of Item_1 and Item_3 nodes.
What is the result of your query? I mean, if your query is meet, Which value do you want to populate in your IDOC?
You should use this sentence: result.addValue(a[0]). It is supposed a is the value returned by the funcion.
If you don`t want create the node in the IDOC, use this other one: result.addValue(ResultListCC).
Regards,
Carlos

XPath expression of task status

Similar Messages

Maybe you are looking for